I need to create a flyer which contains as example 33 lines of text in a column. All textlines have

I need to create a flyer which contains as example 33 lines of text in a column. All textlines have to be underlined in a color. I tried this with „Absatzlinie darunter“ (might be „Paragraph line underneath“.
The short-cut is „Command / Alt / J“, but nowhere I can see any information how to duplicate the underlines.
By the way: I am a InDesign-Beginner; I used to work with QXP before for many years. Who can give me a hint – if possible in German? Thanks a lot!
Dieter

Guten Morgen!
Zunächst herzlichen Dank für die Reaktion und die Tips. – Ich will da nicht
nerven, aber ich bin erst seit kurzer Zeit mit InDesign zugange und stelle
immer wieder fest, dass, je tiefer ich einsteigen will, immer mehr Fragen
auftauchen. Es gibt auch so viele Begriffe, die sich von QuarkXPress
unterscheiden, das ist ja furchtbar.
Können wir vielleicht mal kurz direkt Kontakt über E-Mail aufnehmen? Auch
mit dem Forum habe ich noch Probleme zurecht zu kommen. Ich würde gerne
einen Screenshot senden, der mein "Problem" besser erkennen lässt.
Schöne Grüsse
Dieter Ullrich
Von:  Willi Adelberger <[email protected]>
Antworten an:  <[email protected]>
Datum:  Mittwoch, 15. Januar 2014 20:34
An:  Dieter Ullrich <[email protected]>
Betreff:  I need to create a flyer which contains as example 33
lines of text in a column. All textlines have
Re: I need to create a flyer which contains as example 33 lines of text in
a column. All textlines have
created by Willi Adelberger
<http://forums.adobe.com/people/Willi+Adelberger>  in InDesign - View the
full discussion <http://forums.adobe.com/message/6016307#6016307>
Wenn Du jede Zeile unterstreichen musst, dann sind Absatzlinien (Paragraph
Rules) nicht dazu geeignet. Es gibt zwei Absatzlinien, eine unterhalb, eine
oberhalb.Für das Unterstreichen aller Zeilen kann man nur die Auszeichnung
„Unterstreichen” verwenden, das findest Du im Absatzformat unter
„Grundlegende Zeichenformate” die Option „Unterstreichen”. Besser wäre es
jedoch in der Absatzformatdefinition im Bereich ”´„Unterstreichungsoptionen”
die EInstellungen vorzunehmen, weil dort feinere Einstellungen möglich sind
und sogar zweifärbige Unterstriche möglich sind. Leider hat die
Unterstreichungsfunktion gegenüber den Absatzlinien den Nachteil, dass
Unterstreichungen nur unterhalb des Texts und unterhalb von Leerzeichen und
Tabulatoren funktionieren, Absatzlinien können hingegen auch außerhalb de
Rahmens angelegt werden und eine feste Länge bei allen Zeilen haben.
Please note that the Adobe Forums do not accept email attachments. If you
want to embed a screen image in your message please visit the thread in the
forum to embed the image at http://forums.adobe.com/message/6016307#6016307
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/6016307#6016307 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/6016307#6016307. In the Actions box on the
right, click the Stop Email Notifications link.  Start a new discussion in
InDesign at Adobe Community
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=3359>  For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/thread/416458?tstart=0.

Similar Messages

  • How to create a table which contains relational data and Document data

    hai all
    i need to create a table which contains relational data(i mean coulumns whose data types are type NUMBER,VARCHAR) and documents(like xml file/html file/image)using iFS.
    when i store the document data(xml data/html data) in the iFS ,it will be stored as Document Object.so how do i relate this document object belongs to a particular row in a table.
    do guide me
    thanks

    Please see reply at http://technet.oracle.com:89/ubb/Forum36/HTML/000778.html

  • I need to display a Report which contain -- del QTY  and  INV QTY   in one

    Hi ALL,
    I need to display a Report which contain
    <b>Customer  , Material , Order No, Delivery No, Billing No , Order Qty , Dev Qty, Bill Qty , Invoiced Qty  and There Values  in One Line  .</b>
    How can I Display, When I am executing the report against the Delivery Number Bill Qty and Invoiced Qty is showing Hash ( # ).
    Do I need to right any Routines for this, if I am correct,  where I have to write that code and what is the code ,
    What are the Consolidation  routines ?????
    I am working on BI 7.
    Regards ,
    Shaik
    Message was edited by:
            shaik

    Frst check in backend, which all cubes have got data for each of three..
    Corresponding you can go ahead with Multi/Infoset..
    Look for reference no in all three cubes and pick one order and track tht by reference no in all cubes,
    Hope it helps..
    Thanks for points assigned

  • HOW TO CREATE A VIEW WHICH CONTAINS A PARAMETER

    Hi all
    I am trying to create a view which contains paramaters.
    Lets assume that the view may look like this:
    STEP 1:
    CREATE OR REPLACE procedure Myproc(v_count in NUMBER) as
    BEGIN
    EXECUTE IMMEDIATE
    'CREATE OR REPLACE VIEW myview AS
    SELECT COUNT(*) FROM DUAL WHERE ROWNUM like '''||v_count||'%'' ';
    END myproc;
    SHOW ERRORS;
    Procedure created.
    Elapsed: 00:00:00.31
    SQL&gt; SHOW ERRORS;
    No errors.
    STEP 2:
    SQL&gt; EXEC Myproc(2);
    BEGIN Myproc(2); END;
    ERROR at line 1:
    ORA-00998: must name this expression with a column alias
    ORA-06512: at "MYUSERNAME.MYPROC", line 3
    ORA-06512: at line 1
    Elapsed: 00:00:00.16
    It seems that doesn't really likes the third line: "EXECUTE IMMEDIATE".
    Can I get any help with this one ?
    Thank-you
    Robert

    Bear in mind that VIEWs are not supposed to be parameterised. That is why Nature gave us a WHERE clause. However, there is one, albeit slightly clunky, way of doing it....
    SQL> CREATE OR REPLACE VIEW emp_view AS
      2  SELECT * FROM scott.emp
      3  WHERE deptno = sys_context('userenv','client_info')
      4  /
    View created.
    SQL>
    SQL>
    SQL> exec dbms_application_info.set_client_info(10)
    PL/SQL procedure successfully completed.
    SQL> SELECT * FROM emp_view
      2  /
         EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
        DEPTNO
          7782 CLARK      MANAGER         7839 09-JUN-81       2450
            10
          7839 KING       PRESIDENT            17-NOV-81       5000
            10
          7934 MILLER     CLERK           7782 23-JAN-82       1300
            10
    SQL> Cheers, APC

  • I need to create buttons in which the color changes, and stays on after you release the button

    I need to create buttons in which the color changes, and stays on after you release the button. The hard part is the buttons must change independently of each other.
    To get an idea of some of things I’ve tried I’ve tried making the movie with two frames.
    When I click the button it switched to the new frame which would show a movie clip,
    Unfortunately all buttons would change color together and don’t see how to make it so that they change independently.

    you must use movieclip buttons and code for their frame changes.

  • I need to create a link which will send on email

    hi All
    i need to create a link which will send to email after click to that link it will directly opent that portlet so i want to know how to create
    runtime link.

    What you're referring to is a drop down menu. Those can't be created normally in iWeb. They can be added to a iWeb page but require an HTML snippet and javascript. Some possible javascript solutions have been posted in this forum. Search for drop down menu. Also do a Google search for drop down menu to get a number of sites with possible solutions.
    Or, you can create a separate Residential page and put photos of windows, shower doors, etc. on it and use them as links to the pages for the windows, shower doors. Those pages don't have to be included in the navbar. You can turn it off in the Inspector/Page/Page pane.
    Also see Section 9 of this iWeb FAQ site.
    Happy New Year

  • How should I create JAR file which  contain JMF library and project classes

    Hi,
    I installed the JMF windows pack. I compiled and ran successfully myApplet (which use JMF librarie) in Internet Explorer on my machine. When I run this applet on some different machine, where JMF isn�t installed- it�s not running.
    There is an error:
    java.lang.NoClassDefFoundError: javax/media/ControllerListener
    I was trying to create jar file, which contain librarie JMF.jar and all other files which are require to run myApplet (*.jar, *.class, the files from folder �MyApplet�) and run it on the other computer. It still doesn�t work.
    Also I ran a JMF Customizer and created customize.jar but this file contains only JMF classes. I don�t know how add other files to it.
    How should I create a jar file which will contains all essential files to run myApplet on other machine (something like �All In One� J )
    I�m using Eclipse.
    Can somebody help me?.
    Thank You!
    Best regards:
    Peter

    Hi
    i want to make a jar file of application which is using JMF to play audio
    and video. it works well during compilation and execution but doesn't
    works in jar file.
    please help me how i make a jar file whic will run audio and video too
    your's truely
    abdul

  • How to create a role which contains few query for the user

    Hi,
    I need a create a role in the security which should contain few custom BI queries and then assign the users to the role.
    Even I have to assign the vendor to their unique vendor number in the security perespective for the created BI Reports.
    Thanks!!

    Try this link  http://www.sapecc.com/bw_security/bw_security_newquery.htm

  • Creating zipped file which contain multiple files

    hi all,
    i have a problem which i would like some advice about:
    i need to recieve from a FTP server multiple files and then zip them all in one big zip file.
    now i checked the forums and all i found is using PayloadZipBean which in all the examples create a zip file with one .txt in it.
    is it possible to create multiple files in the zip using this module?
    another problem if the one big zip file is what if each of the files inside the zip file has it's own mapping...
    i think a BPM is a must here and a parallel one also with a correlation...
    i would like if it's possible to do something different as the correlation between the files is a bit complicated?
    regards and thanks a lot,
    Roi Grosfeld

    First,
    I would like to understand your requirement. Is it to only download and zip the files in to one file? XI is not the solution. A OS level script or some C program is what I would use for that which calls some FTP APIs.
    If you requirement is to get different files with different format but want to send them to one desintation which accepts files in only one format, I would not consider zipping them into one file and again unzipping then and executing a mapping XI. Instead, I would have different file adapter for each type of the file and use as many sender agreements with diffrent mappings.
    Hope it made some sense..!!
    VJ

  • How to create an iBOT which contains more than one dashboard page

    Hi,
    I want to create an iBOT which delivers the content in HTML or PDF format, but to contain more than one dashboard page. The idea is that I have several dashboards and I want to send by e-mail (by iBOT) most important pages from different dashboards.
    Is it possible to send by a single e-mail different pages from different dashboards? I cannot find an way to accomplish this in the content of delivery in iBOT.
    Thank you.

    Hi,
    Yes, I can add them to a briefing book, but the clients that will receive it by e-mail should have the briefing book reader in order to view the contents. Is there any way to send the briefing book in a PDF format?
    Thank you.

  • Expert help needed to create a PDF which mirrors a real book

    I am trying to turn my book into a PDF.
    Here's the problem: My book is best enjoyed when the pages are side by side because some of the illustrations fill both pages. Unfortunately when I set my Adobe Reader Page Display to Two-Up, the odd numbered pages appear on the left which screws up the illustrations. Needless to say, most books have the odd numbered pages on the right hand side but I can't seem to figure out how to get Adobe Reader to accomplish this.
    Since my book was originally formatted in a six-year old version of Quark Express, I tried to insert an extra page in the beginning, but this royally screwed up the illustrations and threw everything out of kilter.
    Does anyone have some glorious stroke of genius to help me out of my predicament? Thanks.

    >I am looking for the same thing for a stock trading guide that I have written. Please advise.
    Did you read all of the answers?
    Aandi Inston

  • I need a Paper or article which contain an overview of ORACLE SOA Stack

    Hi
    Hope you all be fine.
    I should prepare a report about what Oracle offer on SOA .
    so if there is a clean paper about Oracle tooling stack for building SOA please give me its link.
    thank you

    Hi
    Thank you very much for the link.
    i got two pdf from there.
    i should prepare report for managers , and i should provide a comparesion between ORACLE and SUN stack :)
    hope i could find enough resource there.

  • I need to create  .pst  ext . file using java,whi will import in ms outlook

    {color:#ff0000}*I need to create .PST extension file using java which will be able to import in ms outlook,and that .pst file will contain root folder (like Personal Folders) and inbox,sent mail*{color}
    give me some hint It is essential task .we have to implement code in  java

    I'm using the thin drivers.
    The answer to your question is no, you do not need to create a DSN to connect to Oracle. The Oracle thin driver is all that is required. Your code looks OK to me, I'm assuming that you xxx'd out the IP, and that you are using a real IP in the actual code.
    The message you got back is pretty generic, but can indicate that the Oracle database listener isn't available. Perhaps the database is on a different port, or perhaps the listerner isn't running. Perhaps you have the IP address wrong.
    So, to be very basic:
    1) Can you ping the server you are trying to connect to? This makes sure you are using a valid IP address.
    2) Can you connect to the Oracle server from an Oracle client? This makes sure the listener is running properly, and that you know the correct port number and login information (The port number could be in a local or server based TNS file, or available through an Oracle names server. You might try using the program tnsping if it is available on the client for validation.
    3) If you can do 1 and 2, then be sure you are using the same connection parameters (server, port userid and password) that worked with 2.
    4) Verify that you are using (pointing to) the correct set of Oracle classes for the thin connection. This can be tricky if you have different versions of Oracle on the client then on the server, but is documented on the Oracle website.
    5) If everything checks out, you might want to verify that you are using the most recent versions of the thin drivers, including the Oracle patches.
    Hope it helps - good luck,
    Joel

  • How to create a material which can be used in T-Codes VAO1 & MB1C create

    Hello Experts,
    How can I create a material which can be used to create a sales order and can be used to create inventory using VAO1 and MB1C T-Codes respectively.
    What are the configurations that I need to take care of, while creating it?
    I need to create a material which can be used in the whole sales cycle(sales order,goods issue,billing and etc).
    Please Help,
    Thanks in Advance,
    Suma

    Hi
    Thanks for your fast replies.. I have created a new material and was able to create inventory thru MB1C. But I was not able to generate a goods delivery(VL01N) and billing document(VF01)  for the sales order.
    Error: No schedule lines due for delivery up to the selected date
    Message no. VL248
    Diagnosis
    There are no schedule lines due for the given order item up to the date chosen.
    System Response
    The system does not create a delivery item for this order item.
    Procedure
    Check whether the order item to be delivered contains confirmed schedule lines.
    If this is the case, set the selection date further into the future if you still want to create a delivery for this item.
    Please suggest,
    Tanks,
    Suma
    Edited by: Suma B on Sep 23, 2008 3:55 PM

  • New to applescript. need to create a plist file using applescript

    Needed some help I need on creatinga plist file below using applescript and I can't make it happen needed some hand on this.
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Username</key>
    <string>${localAdminUser}</string>
    <key>Password</key>
    <string>${localAdminPassword}</string>
    <key>AdditionalUsers</key>
    <array>
    <dict>
    <key>Username</key>
    <string>${userName}</string>
    <key>Password</key>
    <string>${userPassword}</string>
    </dict>
    </array>
    </dict>
    </plist>
    I have tis code but it doesn't seems to work.
    tell application "System Events"
      -- create an empty property list dictionary item
              set the parent_dictionary to make new property list item with properties {kind:record}
      -- create new property list file using the empty dictionary list item as contents
              set the plistfile_path to "~/Desktop/example.plist"
              set this_plistfile to ¬
      make new property list file with properties {contents:parent_dictionary, name:plistfile_path}
      -- add new property list items of each of the supported types
      make new property list item at end of property list items of contents of this_plistfile ¬
                        with properties {kind:string, name:"Username", value:"${localAdminUser}"}
      make new property list item at end of property list items of contents of this_plistfile ¬
                        with properties {kind:string, name:"Password", value:"${localAdminPassword}"}
      make new property list item at end of property list items of contents of this_plistfile ¬
                        with properties {kind:list, name:"AdditionalUsers"}
      make new property list item at end of property list items of contents of this_plistfile ¬
                        with properties {kind:string, name:"Username", value:"${localAdminUser}"}
      make new property list item at end of property list items of contents of this_plistfile ¬
                        with properties {kind:string, name:"Password", value:"${localAdminPassword}"}
    end tell
    The result of the above code will generate a plist file below
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
              <key>AdditionalUsers</key>
              <array/>
              <key>Password</key>
              <string>${localAdminPassword}</string>
              <key>Username</key>
              <string>${localAdminUser}</string>
    </dict>
    </plist>

    Hello
    You need to create elements at correct container. Like this.
    set plist_file to (path to desktop)'s POSIX path & "example.plist"
    --set plist_file to "~/desktop/example.plist"
    tell application "System Events"
        tell (make new property list file with properties {name:plist_file})
            make new property list item at end with properties {kind:string, name:"Username", value:"${localAdminUser}"}
            make new property list item at end with properties {kind:string, name:"Password", value:"${localAdminPassword}"}
            tell (make new property list item at end with properties {kind:list, name:"AdditionalUsers"})
                tell (make new property list item at end with properties {kind:record})
                    make new property list item at end with properties {kind:string, name:"Username", value:"${localAdminUser}"}
                    make new property list item at end with properties {kind:string, name:"Password", value:"${localAdminPassword}"}
                end tell
            end tell
        end tell
    end tell
    Or you may create a record in AppleScript and set the value of plist file at once. Like this.
    set plist_file to (path to desktop)'s POSIX path & "example.plist"
    --set plist_file to "~/desktop/example.plist"
    set dict to ¬
        {|Username|:"${localAdminUser}", |Password|:"${localAdminPassword}"} & ¬
        {|AdditionalUsers|:{¬
            {|Username|:"${localAdminUser}", |Password|:"${localAdminPassword}"} ¬
    --set dict to {|Username|:"${localAdminUser}", |Password|:"${localAdminPassword}", |AdditionalUsers|:{{|Username|:"${localAdminUser}", |Password|:"${localAdminPassword}"}}}
    tell application "System Events"
        tell (make new property list file with properties {name:plist_file})
            set value to dict
        end tell
    end tell
    Regards,
    H
    Message was edited by: Hiroto (PS. Fixed second script so that it uses the original case (uppercase)  in key string)

Maybe you are looking for

  • IPod Touch 1st generation-texting

    I just purchased a refurbished iPod Touch 1st generation for my 10 year old for Christmas. Is there an app she can use on it to text for free with wifi?

  • Why can't I import a photo?

    I have created a new project. I click on Media, then Photos, then select Library. When I scroll down to find the photos I want to use, iMovie unexpectedly quits. I have replicated this several times with the same results. Powerbook G4   Mac OS X (10.

  • Script to Submit XFDF in the background?

    I was wondering if anyone has any hints or techniques on how to submit a pdf as XFDF in the background using javascript on a web instance of Adobe Reader. Right now, I have a button that when the user hits save, submits the XFDF to another web page t

  • Problem when upgrading to 2004s - Table Tree

    Hello everyone, I'm having a problem with a project that i made in 2004 and now i need to migrate to 2004s. In a view, i have a table with tree using a master column. When i choose o child to process, i do something like this:      IPrivateTestView.I

  • Back order report

    In back order report , I want Posting date , delivery date to display in Print layout regards kavitha S