I need to create a MIDI file with control cues only. Is that possible?

I need to create a stand alone MIDI file with control cues to control a non-musical device which does understand these files.
Must I create a virtual device in MIDI Setup for Logic to talk to?
Must I create notes in order to create regions that will export?
Is it possible to do this in MIDI channel 0?
Is LogicPro the tool to use to do this?
The maker of the device uses ProTools to create his MIDI files.
I use a MacBook Pro with OSX 10.10.2 running LogicPro 10.1.1.
Thanks!
Doug

No you cannot trigger a paragraph style with a character or character style.
But you can have a Apply Next Character Style
Accountable for: <paragraph style name "Heading 1">
>> Bullet1 <paragraph style name "Bullet">
In the Heading 1 style go to "Next Style" under "General"
and choose "Bullet"
The select from "Accountable for:" to the last bullet in the list
Right Click on the Heading 1 style and go to Apply Heading 1 and Next Style.
http://creativebits.org/indesign/taking_advantage_of_indesign_s_next_style
http://indesignsecrets.com/where-is-apply-__-then-next-style.php

Similar Messages

Recorded midi file with Garageband keyboard-only the beginning of it plays

Hi,
When i play a recorded midi sound from the jampack with the midi keyboard included (world music instrum.), once the track is recorded, if I start to play it and press stop in the middle of a long note, and press play again, the last part of this note isn't heard. It's no big deal, but for editing it's a pain in the neck because in order to hear the sound I have to go back to the beginning of that same note. Anyone here knows what this can be due to?, Ive checked the garageband help and not much is said about that...
Thanks for the help.
Patrick.

It's not a GB problem, but inherent to midi - the data consists only of "note on" / "note off" events, not continuous information about a key being pressed down. So if you start playing your song after the "note on" event, the program has no way of knowing that the key was pressed earlier. It then just ignores the "note off" event.

To create 3 diff files with same content but with diff names in same target

Hi SapAll.
i have got a a requirement where pi need to create 3 different files with same content but with different names under same target from a single Idoc.
its an IDOC to 3 File Inteface.
can any body help me in providing the differnt solutions for this without use of any script executions.
will be waiitng for response.
regards.
Varma

> i want to use only one communication channel to produce 3 different file names with same content ,so here i should use only one message mapping in 3 operation mappings .
This is not possible to produce 3 different file names with single CC. You have to use 3 different CCs. unless you have going to use some other trick e.g some script to rename the file etc..
As I suggested in my previous reply use Multi-Mapping Or create 3 different Interface Mappings (by using the same MM).
Note: You have to create 3 different Inbound Message Interfaces (you can use the same Inbound Message Type) otherwise while creating the 3 Interface Determination it won't allow because of same Outbound & Inbound Message Interface. It will simply say Interface alreday exists..
So, just use the Multi-Mapping which is best solution in my opinion, because the benefit of using multi-mapping are:
1. You have to create only single Message Mapping
2. Single Interface Mapping
3. Single Receiver Determination
4. Single Interface Determination
5. 3 Receiver CCs (3 you have to use in any case)
6. Performance wise it is good (read the blog's last 2 para)
7. And last but not the least easy to maintain the scenario.

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help?

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help? Is there some way to add the CMYK profile to the list of choices that are available in the export preset dialogue such that I can choose it?

leonieDF
Thanks for your response. My profiles are located within color sync utility as you can see here:
These profiles do not respond to clicking and dragging. Since they are all in one place, more or less, I'm reluctant to make further attempts to relocate them. Accessing the CMYK profile is the first difficult experience I've encountered with this arrangement. I have never needed the CMYK profile until recently, and that need has now past. However, it remains a mystery to me as to why it does not appear with all the others on the menu of export choices in Aperture 2, or on the menu of profile assignment choices in the Preview application (where again all the other profiles are listed as choices). I'm beginning to think my current set up will permit me to view an image that was created in CMYK space, but does not easily assign, or convert to that space. I don't face these restrictions with all the others, so it remains a curious circumstance for me. I anticipate upgrading my computer and software in the near future which might alleviate this issue altogether. Again, many thanks for your attention to this matter. The reach of this community is astounding.

I need to create .pst ext . file using java,whi will import in ms outlook

{color:#ff0000}*I need to create .PST extension file using java which will be able to import in ms outlook,and that .pst file will contain root folder (like Personal Folders) and inbox,sent mail*{color}
give me some hint It is essential task .we have to implement code in java

I'm using the thin drivers.
The answer to your question is no, you do not need to create a DSN to connect to Oracle. The Oracle thin driver is all that is required. Your code looks OK to me, I'm assuming that you xxx'd out the IP, and that you are using a real IP in the actual code.
The message you got back is pretty generic, but can indicate that the Oracle database listener isn't available. Perhaps the database is on a different port, or perhaps the listerner isn't running. Perhaps you have the IP address wrong.
So, to be very basic:
1) Can you ping the server you are trying to connect to? This makes sure you are using a valid IP address.
2) Can you connect to the Oracle server from an Oracle client? This makes sure the listener is running properly, and that you know the correct port number and login information (The port number could be in a local or server based TNS file, or available through an Oracle names server. You might try using the program tnsping if it is available on the client for validation.
3) If you can do 1 and 2, then be sure you are using the same connection parameters (server, port userid and password) that worked with 2.
4) Verify that you are using (pointing to) the correct set of Oracle classes for the thin connection. This can be tricky if you have different versions of Oracle on the client then on the server, but is documented on the Oracle website.
5) If everything checks out, you might want to verify that you are using the most recent versions of the thin drivers, including the Oracle patches.
Hope it helps - good luck,
Joel

Why do we need to create an emergency file?

Please see the link http://help.sap.com/saphelp_47x200/helpdata/en/9f/db95e635c111d1829f0000e829fbfe/content.htm
Why do we need to create an emergency file?

user10566312 wrote:
Packages I know are used to group procedures together. But why do we create packages when stored proc alone is sufficient.For the same reason there are units in Pascal. Libraries in C. It allows the encapsulation of functionality as a single entity with a public interface and a private implementation.
It is is standard as far as structured programming goes.
And a single stored procedure is far from sufficient. It cannot have private and public static variables for keeping state. It cannot present a comprehensive and flexible call interface to the caller. It does not support polymorphism. It cannot expose constants and user types. Etc.

How to create a new file with existing file's resource fork?

Hello,
I would like to create a new file that has the resource fork of an existing file. I had though of making a copy of the existing file, seek to the beginning of the copy and write the new data, but for large files, that creates the whole file even when not needed. I currently create the new file with [NSFileManager createFileAtPath: contents: attributes:], but attributes do not include resource fork items, like custom icons, color label, etc.
[NSURL resourceValuesForKeys] gives a common subset of resource data, like icons and color label, but that's about it. Is there some way to get the resource fork or a copy of the file without getting the whole file?
Thanks

What are you trying to do here? While resource forks might still be quasi-supported, you really shouldn't be thinking about them as such. Instead, think in terms of extended attributes. You can use the low-level xattr() functions to get some of that or you can use the new NSURL methods.

I need to save a midi file

Hi All
I've recorded some piano in GB on my new laptop (MBPro) but need to edit it in Logic. Since I'm running LogicPro7 (on my iMac upstairs) it won't open' the file, as it says it's created by a newer version of Logic.
So I need to save the midi file out of GB, how do I do that?
Thanks
G

Interesting, would you know what type of I should search for?
I have to say, it seems like a pretty basic requirement.
G

How to recognize midi files with iTunes 10.6 ?

iTunes 9.0 recognizes midi files and can it be easily converted into mp3 files.
For the interfacing with iPad2 I must use iTunes 10.6 and it seems this version is not recognizing midi files.
How should I do to manage midi files with iTunes 10.6 ?
Is there in App Store any application with this feature ?
Really it's a pity that a new iTunes version loses fatures instead of gaining !!

The MIDI files in my library still work perfectly. It may be that you simply need to install QuickTime which is no longer installed as part of iTunes.
tt2

Create a flat file with multiple characters for enclosures

Hello,
we use OWB 11g2 (11.2.02).
Now we try to create a flat file with multiple characters for enclosures. The manual wrote:
"Enclosures (Left and Right): Some delimited files contain enclosures that denote text strings within a field. If the file contains enclosures, enter an enclosure character in the text box or select one from the list. The list displays commonenclosures. However, you may enter any character. The default for both the left and right enclosure is the double quotation mark ("). You can specify multiple characters and hexadecimal characters as field enclosures."
But it will not work. The OWB use the first character from the left enclosure definition as left enclosure and the second one as right enclosure !?!
Did anyone know this behavior? Is there a solution for this problem?
Thanks and regards
Norbert

HI Raghu,
Use the function module 'GUI_UPLOAD'.
In that you have to specify the field_separator value = 'X' in export section.
Regards,
S.C.K

How to create a pdf file with CS5

Hello, I'm new to PhotoShop CS5 and haven't figured out yet (despite two hours of trying) how to create a pdf file with pictures and texts. Can someone please help me with this ? The "help" button in CS5 doesn't seem to cover this question. Nor do the FAQs.
Thank you very much.

Save As... Photoshop PDF.

Need to generate the excel file with diffrent sheets using utl_file package

Hi,
Sorry for previous message in which I had missed the usage of " UTL_FILE " package
I need to generate the excel file with diffrent sheets . Currently I am generating the data in three diffrent excel files using
" UTL_File " package and my requirement is to generate this in a single excel file with diffrent sheets.
Please help on this
Thanks & Regards,
Krishna Vyavahare

Hello 10866107,
at Re: How to save a query result and export it to, say excell? you can find links to different solutions. At least the packages behind second and fourth link support more than one worksheet.
Regards
Marcus

How to create a csv file with NCS attributes?

Hi
i installed Cisco Prime NCS and trying to perform bulk update of device credentials with csv file.
How to create a csv file with all required attributes?
This is part of NCS online help talking about this topic:
Bulk Update Devices—To update the device credentials in a bulk, select Bulk Update Devices from the Select a command drop-down list. The Bulk Update Devices page appears.You can choose a CSV file.
Note The CSV file contains a list of devices to be updated, one device per line. Each line is a comma separated list of device attributes. The first line describes the attributes included. The IP address attribute is mandatory.
Bellow is test csv file i created but does not work:
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
The error i am getting while importing this file:
Missing mandatory field [ip_address] on header line:10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
Assistance appreciated.

It looks like the IP address field is incorrectly set.,
It should be as follows
{Device IP},{Device Subnet Mask}, etc etc
so a practical example of the aboove could be (i dont know if this is completely correct after the IP address / Subnet Mask)
10.64.160.31,255.255.255.0,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
below is a link to the documentation
http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/ctrlcfg.html#wp1840245
HTH
Darren

HT2534 i need to create an apple id with out card

i need to create an apple id with out card can u give any suggestions..............for me

You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps

I'm so confused!! I just want to create interactive pdf files (with video and flash files), but this free trial version is confusing!! help!?!

i'm so confused!! I just want to create interactive pdf files (with video and flash files), but this free trial version is confusing!! help!?!

Thanks for your suggestions. I checked to see if the options you suggested were set incorrectly but they were set to sync all. This led me to think the problem was actually in the iphone. I re-initialized the iphone and did not allow the system to restore any of the previous settings. In essence, I forced the phone to reset to factory settings. Then my video podcasts started syncing. All is well now. I did notice that I had seven podcasts selected that were "HD" presentations, and as such, are not compatible with the iphone. I don't know if this had anything to do with my earlier situation, but now I'm getting the video podcasts automatically. I'm happy. It wasn't much fun forcing the iphone to forget all of my preferences and I'm still customizing the phone now several days later. I think I have everything working and back to normal except I haven't identified any of my email accounts as of yet. Thanks for your help.

I need to create a MIDI file with control cues only. Is that possible?

Similar Messages

Maybe you are looking for