I need to create a number 0 with / in it but dont see that on my keyboard

how can I create this code were a number 0 has a / in it don't see it on my keyboard
forumnotifier

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

Similar Messages

I need to create a MIDI file with control cues only. Is that possible?

I need to create a stand alone MIDI file with control cues to control a non-musical device which does understand these files.
Must I create a virtual device in MIDI Setup for Logic to talk to?
Must I create notes in order to create regions that will export?
Is it possible to do this in MIDI channel 0?
Is LogicPro the tool to use to do this?
The maker of the device uses ProTools to create his MIDI files.
I use a MacBook Pro with OSX 10.10.2 running LogicPro 10.1.1.
Thanks!
Doug

No you cannot trigger a paragraph style with a character or character style.
But you can have a Apply Next Character Style
Accountable for: <paragraph style name "Heading 1">
>> Bullet1 <paragraph style name "Bullet">
In the Heading 1 style go to "Next Style" under "General"
and choose "Bullet"
The select from "Accountable for:" to the last bullet in the list
Right Click on the Heading 1 style and go to Apply Heading 1 and Next Style.
http://creativebits.org/indesign/taking_advantage_of_indesign_s_next_style
http://indesignsecrets.com/where-is-apply-__-then-next-style.php

To create 3 diff files with same content but with diff names in same target

Hi SapAll.
i have got a a requirement where pi need to create 3 different files with same content but with different names under same target from a single Idoc.
its an IDOC to 3 File Inteface.
can any body help me in providing the differnt solutions for this without use of any script executions.
will be waiitng for response.
regards.
Varma

> i want to use only one communication channel to produce 3 different file names with same content ,so here i should use only one message mapping in 3 operation mappings .
This is not possible to produce 3 different file names with single CC. You have to use 3 different CCs. unless you have going to use some other trick e.g some script to rename the file etc..
As I suggested in my previous reply use Multi-Mapping Or create 3 different Interface Mappings (by using the same MM).
Note: You have to create 3 different Inbound Message Interfaces (you can use the same Inbound Message Type) otherwise while creating the 3 Interface Determination it won't allow because of same Outbound & Inbound Message Interface. It will simply say Interface alreday exists..
So, just use the Multi-Mapping which is best solution in my opinion, because the benefit of using multi-mapping are:
1. You have to create only single Message Mapping
2. Single Interface Mapping
3. Single Receiver Determination
4. Single Interface Determination
5. 3 Receiver CCs (3 you have to use in any case)
6. Performance wise it is good (read the blog's last 2 para)
7. And last but not the least easy to maintain the scenario.

HT2534 i need to create an apple id with out card

i need to create an apple id with out card can u give any suggestions..............for me

You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

I need a VoIp app to use with firefox OS but I can't find any.

I need a VoIp app to use with firefox OS but I can't find any.
Is there any app like skype or VoIpBuster?

Hello c.glez.az,
Thank you for contacting Mozilla Support. We don't currently have a Voip app in our Marketplace, but keep checking. Our marketplace is still quite young and new apps are being released everyday.
Thank you!
Patrick

Hi, i am new to PDF forms & need to make drop down menu with pictures, how do i do that ?

Hi, i am new to PDF forms & need to make drop down menu with pictures, how do i do that ?
some one suggested to use coding to achieve similar results, but i don't know where and how to use it, please help!

Sorry, images in drop downs are not supported by Formscentral.
Andrew

Can i create credit note request with selling price,but without material no

hi
can i create credit note request with selling price, but without material no.? which item cat. i should choose?
thanks

Hi,
The price is controlled for any item category with the help of the Item Category setting (VOV7 tcode) that is, the field Pricing under Business Data section.
Select the option X in the Pricing field.
Now for your case, the setting will be greyed out. as it is a text item....
To make it for entering any option ....then change the option to A in the Item Type field.
Reagrsd

Hi every body, I need to visit an apple store in Tallinn, Estoni but it seems that there is no Apple store here. So what can I do? finding an agent or?

Hi every body, I need to visit an apple store in Tallinn, Estoni but it seems that there is no Apple store here. So what can I do? finding an agent or?

http://www.apple.com/ee/support/

HT1553 i am upgrading my 2008 macbook to an ssd drive and want to save my settings. how do i save then? I have my files backed up with time machine ,but dont want to restore all files ,as there might be some junk backed up too. Help will be appretiated

i am upgrading my 2008 macbook to an ssd drive and want to save my settings. how do i save then? I have my files backed up with time machine ,but dont want to restore all files ,as there might be some junk backed up too. Help will be appretiated

When you restore from a Time Machine back up you can pick and chose what is restored. It is not an all or nothing process. Nor do you have to do the partial restores all at the same time. If days after the first partial restore you find something else you want you can restore just that.

HT1766 Hi! I upgrade my iPhone 5 from ios 7.1 to 7.1.1. When it finished I wanted to restore with my backup but iTunes says that it can't because incompatible or corrupted. What can I do then to restore my iPhone?

Hi!
I upgrade my iPhone 5 from ios 7.1 to 7.1.1.
When it finished I wanted to restore with my backup but iTunes says that it can't because incompatible or corrupted.
What can I do then to restore my iPhone?

Backups are only used for restoring iPhones via iTunes.
If you desire to go about another method for extracting data from a backup, use google to find out how (if possible) to make that happen.

HELP! i need to create a photo album with pictures titles!

Does someone know how to create a photo album with title on each picture?
I tried some apllications but i don't see the title of each picture. Please i need it for an exhibition.
Thanks

Thanks for your fast response.
I have a file in my pc with a lot of images. I did a sync with my ipad and i found all the files with pictures but they appear without title, but i can see titles on my pc!!
maybe i need a specific application?

I need to create GL accounts centrally with SPRO

Hi experts,
I'm new with SPRO in SAP, because I just came from a business career.
I try to create G/L account centrally, when I enter the fileds, I get error message : "Description in language E already created".
What is my error please? Thanks for your help.

hi
actually we can create G/L accounts at three places
at co code level
at chart of acct level
centrally
generally at company code level we contain some fields and at chart of acct level we contain some fields so we need to create at two places. so,instead of creating at two places we create at centrally where we have all the fields of company code level and chart of acct level
i think u r trying to create the G/L acct which is allready exist
so u r getting that error
rgds
sree

I need to create a wireless network with a Mac and a Windows PC...

...and I have made certain assumptions. Are they right?
First, the background. We have two ISPs: the Mac is connected to cable broadband via Airport Express (the cable point and the Mac are in separate rooms); the PC laptop is connected to broadband down the phoneline via a wireless Netgear modem (or router? not sure what the difference is). Our printer is connected via USB cable to the Mac and we'd like to be able to print wirelessly from the PC. Ideally, I'd like both computers to access the cable broadband.
Assumption 1: I need to create "A Network";
Assumption 2: Because the PC may on occasion be used beyond the range of Airport that network should access the web via the Netgear modem/router;
Assumption 3: My first step is to plug the Netgear modem/router into the cable modem and reset the Mac to work with the Netgear thing.
Assumption 4: Next step is to change network settings on the PC to go online via cable.
Assumption 5: Then I weave some voodoo to create A Network (sorry, but this is virgin territory).

I would recommend that you set up your home network to have one single broadband access point for one and only one wireless router/modem combo (Netgear), that has NAT enabled and DHCP enabled. Then, I believe that Airport Extreme Base Stations can be set up in a "range extender" mode (sorry I don't have one so don't know all the details on this). It would not be set up as a router administering NAT or DHCP, it would be set up more like as if it were a hub (analogy: AC electrical power "octopus" outlet). Lastly, this website has a ton of information on how to set up Macs and PCs to do file sharing, printer sharing, etc., in either direction.

Hai need to create a pop-up with radiobuttons

Hi all,
I need to create a pop-up window with two radiobuttons in smart form driver program. This popup sholud appear before the print preview is seen and need to perform some actions based on that radiobutton options.
How to create the popup with two radiobuttons.
Pls send me if u have any sample codes.
Thanks
Saravana.

Hi
Before you call your smartform you can do it this way:
**design the selection screen as folllows:
selection-screen begin of screen 100.
parameters: rad1 type c radiobutton group g1,
rad2 type c radiobutton group g2.
selection-screen end of screen 100.
Call selection-screen 100.
**you can now do some processing before the smartform is called.
Thanks and Regards,
Kunjal Patel

I need to create a number 0 with / in it but dont see that on my keyboard

Similar Messages

Maybe you are looking for