I need to create several different sets of radio buttons within one document.

How do I designate a group of radio buttons. When I export my file as it is now, all of the radio buttons in my file are in just one group, which is not accurate.
Thank you

Thank you. As it turns out I had done it correctly, the style was just so, that the radio button was hard to distinguish if it had been clicked or not. When I zoomed in there was a slight dot in the center of the radio button to designate that it was actually selected.
Thank you again.

Similar Messages

I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign?

I need to create 4 @ A2 boards that print adjacent to one another (all landscape format) with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards? Is it best to use Illustrator(CS3) or Indesign?
Thanks.

Re: I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign
If possible, please try Indesign CS 4.

I have 2 children with iPods and I need to create 2 different accounts for them so they can play the same games. How do I do this?

I have 2 children with iPods and I need to create 2 different accounts for them so they can play the same games. How do I do this?

To restore the classic menu bar, you can do any of these:
orange Firefox button > Options > Menu Bar
tap the Alt key > View > Toolbars > Menu Bar
right-click a blank area of the tab bar or navigation bar > Menu Bar

Sets of Radio buttons all grouped together

I am creating a form with many sets of radio buttons. Each set contains 3 buttons. When I add the 4th button, Designer groups it with the first three. When I add a 5th button, it is automatically grouped with the first 4. I need to separate the buttons into groups of 3. How do I manually choose which radio buttons to group together?
Eric

Doing this is little tricky... Add all your radio buttons and then choose all the ones you want to group in a different set holding Ctrl key. And then click your mouse button (right). Then choose 'Wrap in New Radio Button Group'.
Good luck,
SekharN.

MRER - Error - different tax coutries not permited in one document

Dear Expert,
I am facing problem while processing MRER transacation, System is throwing the error message - Different tax countries not permited in one document.
I am trying to post w.r.t the PO/ Material document, My PO type is Distributed release order ( Return PO)
But when i tried to post the same document through MIRO transaction( Credit memo) , i can able to post successfuly without any error.
I have checked following things for ERS( evaluated receipt settlement).
Creating PO & GR trough Idoc, no manual creation.
1. Vendor master is marked for ERS.
2. ERS is active in PO.
3.For me Vendor is belong to Poland(PL), Comapany code is : Germany(DE) , and Plant is Hungery(HU).
4.in FTXP for a country DE(Germany) reporting courty has been defined as "HU" Hungery & for Hungary(HU) there is not any reporting courty defined.
5.Tax code which is mantained is available for both HU, DE,
6.plant is active as a abord plant.
I hope all these setting are OK, if any thing is wrong please guide me.
Requested all of you please guide me , what is going wrong while processing the MRER / MRRL transaction.
or is there any standard SAP note is there for such scenarios & that i have to implement, if yes , it will be greate help if i will get the SAP notes.
Appreciated your ernest help on above.
Thanks & Regards
Om

hi
The system issues this error message if different tax codes are used with different reporting countries (T007A-LSTML) in the billing document and this billing document also generates a customer line item.
Different reporting countries are required for the 'Plants abroad' function. However, the plants abroad billing document does not generate a customer line item, which is why the system does not issue this error message in this case.
plz check the tax code and counties

Different Footnote Styles within one document

I work in InDesign 5.5. Currently I'm working on a project that requires different footnote styles within one document (1, 2, 3, . . . and a, b, c, . . .). How can I set them up as different styles? If I make a change in the Document Footnote Style section, all the footnotes are changing, but I need them different for different sections. How do I do that? Your help is appreciated. Thank you.

I'm working on a book interior. The book interior has two sections, a intro section and a regular text section. For the intro section footnotes should be styled as a., b., c., etc. and for regular text the footnotes should be styled as 1., 2., 3., etc. It seems though that I can only select one style in the Document Footnote Style section, but I need two different styles.

Set of Radio Buttons in a page

Hi,
I am new to OAF. My use case is to create a page with set of 'Yes/No' questionnaires. So, there will be set of radio buttons associated with each questions.
Please guide me to achieve this in OAF.

Hi,
You can create the radio button in processRequest by using (OAMessageRadioButtonBean)webBean.createbean()
Also, check if this link can help u : http://oracleanil.blogspot.in/2009/04/radio-group-event.html
--Sushant

Disable a set of radio buttons

Hello Experts,
I have written a code in which there are two set of radio buttons.
In first set there are three radio buttons.
p_range    RADIOBUTTON GROUP rbg DEFAULT 'X',
p_date      RADIOBUTTON GROUP rbg,
p_comp     RADIOBUTTON GROUP rbg.
In second set there are 10 radio buttons.
I need to write a code in a way that if user selects the third radio button from first set p_comp, then few of the radio buttons from the second set should grey out.
Please help me with some sample code.
Would definately reward if the code is useful.

Alternatively you can also use MODIF ID's for the radio buttons to do the same.
You can get the syntax on the F1 help...
Cheers,
Tatvagna.
Eg.
p_1 RADIOBUTTON GROUP rb2 DEFAULT 'X' modif id r1,
p_2 RADIOBUTTON GROUP rb2 modif id r1,
p_3 RADIOBUTTON GROUP rb2 modif id r1,
p_4 RADIOBUTTON GROUP rb2 modif id r3,
p_5 RADIOBUTTON GROUP rb2 modif id r1,
p_6 RADIOBUTTON GROUP rb2 modif id r1,
p_7 RADIOBUTTON GROUP rb2 modif id r2,
p_8 RADIOBUTTON GROUP rb2 modif id r2,
p_9 RADIOBUTTON GROUP rb2 modif id r2,
p_10 RADIOBUTTON GROUP rb2 modif id r1.
And then do
Loop at screen.
       IF screen-group1 IS NOT INITIAL AND
        NOT screen-group1 EQ 'R1' .
          screen-active = '0'.
          MODIFY SCREEN.
       ENDIF.
endloop.

2 sets of Radio Buttons in a Form-complications

Hello everyone,
I have been looking around for code to assist me in building a form. I have developed the form, and just have a couple problems that I can't figure out.
In one question on the form the user can choose from one set of radio buttons and select one of the five options. Then I have a second set of radio buttons, that the user can again only choose one option. My problem is that I only want the user to be able to select from the second set of radio buttons if they selected a certain option in the first set. An example to clear up my problem:
Did you finish the training:
Yes
Half
None
So if the user selected yes from the first set of radio buttons, I want the second set of radio buttons to now be selectable:
The training was:
Up-beat and enjoyable
Snoozer
The conditions that I am using are very different than these but this is just a simple skit. So how do I make the second set of radio buttons unselectable until the user selects a specific radio button from the first set of radio buttons.
Thanks, I really appreciate the help!

If you have a radio button exclusion group called 'completion' with three items 'Yes','Half', and 'None' and a second radio button exclusion group called 'completion', go to the 'feedback' Value tab and set the type to 'readOnly'.
Add the following script to the 'completion' change event...
// form1.page1.subform1.completion::change - (JavaScript, client)
if (this.rawValue == "Yes") {
form1.page1.subform1.feedback.access = "";
else {
form1.page1.subform1.feedback.access = "readOnly";
form1.page1.subform1.feedback.rawValue = "";
If the user selects 'Yes', the 'feedback' group is available for selection. If the user does not select 'Yes', 'feedback' is reset and made readOnly.
Steve

Do we need to create two different home for UCM and WC?

Hi All,
I am trying to create Webcenter VM(oracle linux 5) with ECM I used 11.1.1.5.0 version for all installable.for creating this VM.
here do we need to create separate Home for webcenter and UCM installations.
any one give me some proper directions to installation of the same
thank you!
Siva

yes i saw those folders but while installing I installed weblogic server in fmw folder.then Installed UCM on top of the i installed WC,but while installing WC its showing ora home is already exits select another or override. like that i am getting so i override. when i am creating domain its completed but i am not able to see startWeblogic.sh in bin folder of the domain.
I realized that i did mistake while installation.
can you please give me best infrastructure for web-center installation with all features(portal,sites spaces and content) I have sufficient memory to run multiple VMs.
Thank you!
Siva

Windows Explorer was crashing/restarting every few seconds and after trying several different methods of fixes, the only one that worked was removing Firefox, is there something I've missed that I can get Firefox back?

I'm running a Toshiba Satellite laptop that was originally running Windows Vista 32-bit, but was upgraded by me to Windows 7 32-bit. On Windows Vista, all I would run was Firefox. I loved it!!! On Windows 7, I've noticed that Firefox kept hanging whenever I would try to download a file...from anywhere. I got so frustrated I went to try several different browsers. They all worked extremely quickly, whereas Firefox was working so slow, I could click on a link to a page, go get some lunch, come back and it still be trying to load the page. This was drastically unusual for Firefox. I used the other browsers and everything was fine for a week and then Windows Explorer started going down every few seconds. I went to the windows 7 forums and started looking. There were several suggestions on how to fix the problem, none of which worked for my compy. I tried restarting the compy in safe mode. That didn't help. I turned off every startup program except for the essentials and that DID work in keeping Windows Explorer from restarting. I then dove into the tedious task of trying to discern which 3rd party program was the offender. I removed everything from my compy that had been downloaded in the last ten days (well before the windows explorer issue, but not before the firefox issue). That didn't work either. I tried replacing an explorer file, which didn't work either. There were several other things I tried, as well, but nothing worked. Then, I saw a post that Firefox had caused the problem for one person. I went in and did as was suggested and completely removed Firefox and all associated files. Unfortunately, this worked. I haven't had any more trouble with windows explorer restarting. My big problem is, however, I can't run Firefox!!! And I LOVE Firefox!!! It's spoiled me! I hate Internet explorer, which is what I'm forced to run now. I've tried Safari and Google Chrome and don't like either one of those, either. I want my Firefox back! But if it's not working 100% it's less frustrating to be forced to live with the Internet Explorer. I'm going insane, here! Does anyone have any suggestions? I tried clearing out browser history, changing download files and a couple of other things and nothing worked with the Firefox to get it going better before I started having the Windows Explorer difficulty and had to completely erase the Firefox program. If I've missed any info, please don't hesitate to ask!! I'm happy to supply whatever I know about the issue!!

uninstalled firefox ....deleted all files still remaining under mozilla firefox directory in program files ... to avoid having to reprogram all my settings, reisntall all addons as well .. I did not remove anything from mozilla firefox that is stored in either appdata or under the windows users directory (if any)
... the as suggested reinstalled the latest version of the firefox browser using the link you provided in the email ..; tested and several issues still remain present and unresolved ....
so please this is urgent or I will have to jump browsers and start using chrome .. because we work 14 hours a day 6 (sometimes 7) days a week, to get ready for the launch of our newest venture and we cannot lose that much days on browser related issues ... so please instead of putting me through week long step process .. of do this .. do that .. can you please actually look into the issue from your end .. I use firefox for so many, many years thta I deserve this kind of support .. thnx Robert

How can I set a radio button to a be checked using an action script?

Acobat X: I have two radio buttons called EnrollmentType with different values. "New Student" and "Returning Student". I need to set 160 forms to returning student, Please
will this work?
getField("EnrollmentType").value = "Returning Student"

This is Adobe X Pro:
Ok when I click the properties of the radio button. Both have the same
"Enrollment type".
But each has a different "Radio Button Choice" under the Options TAB.
It does work when I process the forms and save the data.
The field "Enrollment type" contains either "New Student" or "Returning
Student" depending on which option they picked.
I am sending these forms back to the parents to edit any new/changed info
and want it to have "Returning Student" checked since they are in fact
returning and not new anymore.

How to set a radio button to be selected?

I'm trying to find out how to do something that should be seemingly simple. That is to create a little function that selects a random radio button as selected. I have 3 radio buttons in a group (see code):
</mx:ApplicationControlBar>
<mx:RadioButtonGroup id="radiogroupZ"/>
<mx:RadioButton x="10" y="608" label="Button 1" groupName="radiogroupZ"/>
<mx:RadioButton x="10" y="634" label="Button 2" groupName="radiogroupZ"/>
<mx:RadioButton x="10" y="660" label="Button 3" groupName="radiogroupZ"/>
I've tried all kinds of code to try to set Button 1, 2 or 3 as selected but the compiler keeps giving me errors.
Can someone give me an example of a simple function that will set one of these as highlighted? All I need is the code that basically says for example: "Select Button 1 in the group "radiogroupZ to be selected".
Thanks

// This will have the first button selected.
<mx:RadioButtonGroupd id="radiogroupZ" selectedValue="somethingHere1"/>
<mx:RadioButton x="10" y="608" label="Button 1" value="somethingHere1" groupName="radioGroupZ"/>
<mx:RadioButton x="10" y="608" label="Button 1" value="somethingHere2" groupName="radioGroupZ"/>
<mx:RadioButton x="10" y="608" label="Button 1" value="somethingHere3" groupName="radioGroupZ"/>
// To select something in a function
private function functionName():void
radiogroupZ.selectedValue = "somethingHere1";

Using a dropdown to set a radio button

I've been searching and searching in vain, trying many different things can I cannot seem to find an answer already or stumble on similar code to help.
I've got a dropdown, then when you select different values set different fields on the form. That part works fine stuff like this in the custom validate:
if (event.value == "Thing1") {
this.getField("DESC01").value = "Words that fill in a desciption box.";
this.getField("DESC02").value = "More words that fill in another descrption box";
this.getField("F_SKILL1").value = "1";
this.getField("RB_SKILL1").isBoxChecked(1);
this.getField("F_SKILL2").value = "1";
this.getField("F_SKILL3").value = "1";
} else if (event.value == "Thing2") {
this.getField("DESC01").value = "Different words that fill in a desciption box.";
this.getField("DESC02").value = "More different words that fill in another descrption box";
this.getField("F_SKILL4").value = "1";
this.getField("RB_SKILL1").isBoxChecked(0);
this.getField("F_SKILL5").value = "1";
this.getField("F_SKILL6").value = "1";
etc, etc. I've got a few different else ifs but they all follow this kind of format. There is are also radio button next to the skills on the sheet to visually display that skill is known. So I'd like to turn that radio button on. My isBoxChecked isn't working, and I expect that's because it doesn't work that way. I have a lot of radio buttons on the form, but they all have 1 choice in them none are groups. Again, I'm using this as a visual display that SKILLX is known. The area I've dropped the radio button onto the sheet is a very small circle which is why I am trying to use a radio button as it's visually similar.
If there is a better solution to what I'm trying to do I'm happy to try that, or if someone can tell me what I'm doing wrong that'd be super
Thanks!

Not quite sure I'm getting what you are laying down...
So in the dropbox, under options I should set the export value of Thing1 choice to RB_SKILL1 and then in my validate I should include this.getField("RB_SKILL1").value = 'Yes' ?
Or I should just set the export value of Thing1 to this.getField?
Thanks
Oh, using a check box I was able to get this working using the export values set for Thing1 option, most excellent! Thank you very much!

Setting a Radio Button value using Javascript

After much research, I've figured out that the appropriate command to get the value of a Radio Button in APEX JavaScript is "html_RadioValue", but I haven't been able to figure out a command that will let you set the value of the Radio Button. Is there documentation on APEX's use of JavaScript that covers this issue?
Here's a simplified version of the script:
<script language="JavaScript" type="text/javascript">
function showval()
var item1 = html_RadioValue('P19_RADIO');
alert(item1);
//Reverse the current selection
if (item1 == 'Y') then
<mystery_statement> //set P19_RADIO to N.
else
<mystery_statement> //set P19_RADIO to Y.
</script>
I've tried the following, but none of them have worked:
- document.getElementById("P19_RADIO").value = 'N';
- document.getElementById("P19_RADIO").checked = 'N';
- $x('P19_RADIO').value = 'N';
- $x('P19_RADIO').checked = 'N';
Thanks.

Okay, that worked in the Oracle-hosted environment, but not in my development environment. Looking at the view/source output from each, it seems that the versions of APEX are different - my environment is using version 3.0.1.00.07.
The most obvious difference between the sources is the javascript includes at the top:
<script src="/i/javascript/apex_ns_3_1.js" type="text/javascript"></script>
<script src="/i/javascript/apex_3_1.js" type="text/javascript"></script>
<script src="/i/javascript/apex_get_3_1.js" type="text/javascript"></script>
<script src="/i/javascript/apex_builder.js" type="text/javascript"></script>
vs.
<script src="/i301/javascript/htmldb_html_elements.js" type="text/javascript"></script>
<script src="/i301/javascript/htmldb_get.js" type="text/javascript"></script>
My fundamental question is: how does one learn Javascript, in the context of APEX? I can't find any documentation that explains what $v means, or what $x means, or what $s means.
Thanks.

I need to create several different sets of radio buttons within one document.

Similar Messages

Maybe you are looking for