I need to delete existing website data created with FTP years ago...Why is this so HARD?

I know this haqs been re-hashed a milion times here on the board, but I don't want to keep calling in to the support number and getting people who have no idea what I am talking about trying to help me!
I have an old legacy website or two sitting out there that I am tired of being charges web space for. I no longer need or want the files. I just want them deleted. What is the best way to do this? Why on God's green earth can't I find an easy solution to this? Please help!!!!
Thanks in advance,
John

Reposting from britechguy's post here:
To All Who Need Files Deleted From PWS That Were Created Via FTP Transfer:
Do call Verizon High Speed Internet Tech Support at 1-800-VERIZON (1-800-837-4966)
Expect that the Technical Support Representative may not be familiar with the issue you are calling about, but they may be. In any case, be polite as this is not their fault.
If the representative is not familiar with the issue, do tell them that you already know that this issue must ultimately be resolved by the Operations Support Center and that all you are asking for is that a ticket be created to delete all files from your Verizon PWS.
Make sure to state, and ask that they note in the session notes, that you clearly understand that the deleted files are unrecoverable/cannot be restored under any circumstances once they are removed. I say this because during today's conversations I was told that my previous request was put "on hold" because the prior representative had not specifically covered this information and they had been unable to reach me afterward to confirm that I knew it.
Specifically request an e-mail or phone verification that the deletion of the PWS files has been completed.
Expect that the deletion will take between 24 to 48 hours to actually occur.
Be prepared to call back and make the same request again if it does not occur.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Similar Messages

I have my ipad notes linked to gmail and suddenly disappeared when I put the sim card into a new iphone, the funny thing is that almost all disappeared except 4 and with different dates up to two years. Why did this happen? No way to recover them?

I have my ipad notes linked to gmail and suddenly disappeared when I put the sim card into a new iphone, the funny thing is that almost all disappeared except 4 and with different dates up to two years. Why did this happen? No way to recover them?

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

I am creating a request for proposal form and I need to add a commission structure field. I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?

I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?

It sounds like what you are trying to do is edit the choices in a likert field to something other than the default radio button. This is not something that you can do in Formscentral at this time.
Andrew

Delete files and sub-directories over created over 1 year ago

Hi Josh,
Have a look at this script I got for cleaning up a scans folder.
It's a bit over the top but it works.

Hello,
I have a batch script that runs at the start of every month which clears report files and moves them into an archive directory in a folder with the date of the move. So the archive folder doesn't fill up i want to run a script on it that clears out any folders created over 1 year ago.
I've got:
Set dir="C:\aa_Mine\test\testto"
Echo Deleting all files from %dir%
del %dir%\* /F /Q
Echo Deleting all folders from %dir%
for /d %%p in (%dir%\*) Do rd /Q /S %%p
pause
which deletes all the files and folders in the directory but is there a way only doing it for ones edited over 1 year ago. I tried to add the /minage: command but its not supported.
Any ideas?
Cheers
This topic first appeared in the Spiceworks Community

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
Thanks!
David

Either of these should help.
http://grandperspectiv.sourceforge.net/
http://www.whatsizemac.com/
Or search 'disk size' in the App Store.
Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

I'd copied some pictures from a PC to a folder in Finder in my new iMac. The 'Date Created' in iMac is not the same as the 'Date Created' in the PC. Why? Is there a way to fix that?

I'd copied some pictures from a PC to a folder in Finder in my new iMac. The 'Date Created' in iMac is not the same as the 'Date Created' in the PC. Why? Is there a way to fix that?

View Menu -> Sort Photos is a good way to start.
Some organising possibilities in iPhoto:
I use Events simply as big buckets of Photos: Spring 08, July - Nov 06 are typical Events in my Library. I use keywords and Smart Albums extensively. I title the pics broadly.
I keyword on a
Who
What
Where basis (The When is in the photos's Exif metadata). I also rate the pics on a 1 - 5 star basis.
Using this system I can find pretty much find any pic in my 50k library in a couple of seconds.
So, for example, I have a batch of pics titled 'Seattle 08' and a typical keywording might include: John, Anne, Landscape, mountain, trees, snow. With a rating included it's so very easy to find the best pics we took at Mount Rainier.
File -> New Smart Album
set it to 'All"
title contains Seattle
keyword is mountain
keyword is snow
rating is 5 stars
Or, want a chronological album of John from birth to today?
New Smart Album
Keyword is John
Set the View options to Sort By Date Ascending
Want only the best pics?
add Rating is greater than 4 stars
The best thing about this system is that it's dynamic. If I add 50 more pics of John to the Library tomorrow, as I keyword and rate them they are added to the Smart Album.
In the end, organisation is about finding the pics. The point is to make locating that pic or batch of pics findable fast. This system works for me.

I have a related but different problem... I prefer that the photos/events on my iPhone and iPad be in "date created" order. Does anyone know if this is possible? Apple...please give us some options.

I have a related but different problem... I prefer that the photos/events on my iPhone and iPad be in "date created" order. Does anyone know if this is possible? Apple...please give us some options!!!

This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

I am using Lightroom 3 and need to access a catalog I created with a trial version of Lightroom 4.

I need to access a catalog I created with a trial version of Lightroom 4. I am currently using Lightroom 3. Can someone help me find a way to get my images from this catalog? I don't want to upgrade at this point as I am running on a mid 2007 iMac and would need to buy new RAM, upgrade my OS, etc.... I would rather wait and spend the money on a new system when I'm ready.

Hi Rikk,
I just saw your answer to Deborah,
Does this mean catalogs not backward compatable in regards to metadata and keywords as well?
I am working on a giant archiving project here in India. The main system here is a Mac G5 Tower at 10.6.8, and it's running LR 3.2. I have my MacBook Air here, running Mavericks and LR 4.4.1.
I want to take the archive catalog OFF of LR 3.2, put it on the Air, running 4.4.1 - then ADD metadata and keywords to the catalog images while on the Air and THEN re-install/import/export/etc the catalog back to the main tower LR 3.2 with out starting a huge problem of version/upgrades/etc. That way another person can be using the tower to scan while I do keywords.
I have only a week more here for this project. If anyone knows asap would be great. Thanks in advance.
Barbara

Reg: PO release notification needs to send to the PR Creater with PO num

HI Gurus,
Iam new to workfow. I have one senario in workflow.
Requirement: when ever PO release notification needs to send to the PR Creater with PO number and corresponding PR number.
Please guide how to do this .
My questions :
1.How can we can get the PR Creater user id to send notification mail
Thanks & Regards
Ramesh

Hi Ramesh ,
Which workflow you are using for PO . If it is the standard one , there is a rule used in the worklfow called 20000027.
In this there is an USer exit . In this exit , you can write your code for sending the workitem to the PR creator.
If you are using a custom workflow for this , then create a new rule and in that write the code for fetching the PR Creator and assign the user ro the actor tab. Incluse this rule in ur task .
This will solve your problem.

Only one track is downloaded per album on itunes on my iphone 5. Every time I download a new track it deletes the previously downloaded track on that album. Why is this happening and how can I switch it off?

Only one track is downloaded per album on itunes on my iphone 5. Every time I download a new track it deletes the previously downloaded track on that album. Why is this happening and how can I switch it off?

Most YouTube content requires the Flash plugin. Sometimes it's necessary to uninstall then reinstall that plugin.
Uninstall the Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
Very important to uninstall the currently installed plugin first.
Now launch Safari and try a video.
If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari.
You may also need to delete the cache associated with Safari .
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/paste: ~/Library/Caches/com.apple.Safari
Click Go the move the Cache.db file from the com.apple.Safari folder to the Trash.
Quit and relaunch Safari. Try a video.

When I look up the creation date for files on my Macbook I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

When I look up the creation date for files on my Macbook (using "get info", or the information window in Iphoto) I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

Does the Date Modified column in a window set to List view show the date correctly, or does it also display it incorrectly?
To add additional columns to a Finder (folder) window, with that window open and active open the View Options for it. You can do that by pressing Command-J or by selecting View Options from the View menu in the main menubar.

I cant upgrade camera raw and need to to be able to work with new camera files why?

i cant upgrade camera raw and need to to be able to work with new camera files why?

Boilerplate text from Best Practices FAQ
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    * Adobe product and version number
    * Operating system and version number
    * The full text of any error message(s)
    * What you were doing when the problem occurred
    * Screenshots of the problem
    * Computer hardware, such as CPU; GPU; amount of RAM; etc.

Need to delete specific Months Data from SQL Server Table

Greetings Everyone,
So i have one table which contains 5 years old data, now business wants to keep just one year old data and data from qurter months i.e. (jan, mar, June, sep and December), i need to do this in stored procedure. how i can achive this using month lookup table.
Thank you in advance
R

Hi Devin,
In a production environment, you should be double cautious about the data. I have no idea why you’re about to remove the data just years old. In one of the applications I used to support, the data retention policy is like to keep raw data for latest month
and the elder data would get rollup as max, min, average and so on to store in another table. That’s a good example for data retention.
In your case I still suggest you keep the elder data in another table. If the data size is so huge that violates your storage threshold, get the data rollup and store the aggregated would be a good option.
Anyway if you don’t care about the elder data, you can just delete them with code like below.
DELETE
FROM yourTable
WHERE YEAR(dateColumn) < YEAR(CURRENT_TIMESTAMP) OR (MONTH(dateColumn) not in (1,3,6,9,12) AND YEAR(dateColumn) = YEAR(CURRENT_TIMESTAMP))
In some cases to remove data from very large table, DELETE performs bad. TRUNCATE would be a better option which works faster. Read more by clicking
here. In your case, if necessary, you can reference the below draft code.
SELECT * INTO tableTemp FROM yourTable WHERE YEAR(dateColumn) = YEAR(CURRENT_TIMESTAMP) AND MONTH(dateColumn) IN(1,3,6,9,12)
TRUNCATE yourTable;
INSERT INTO yourTable SELECT * FROM tableTemp
As you mentioned, you need to do the deletion in Stored Procedure(SP). Can you post your table DDL with sample data and specify your requirement details so that I can help to compose your SP.
If you have any question, feel free to let me know.
Best regards,
Eric Zhang

Need to DELETE and LOAD data of the Last month to

Hi Experts,
I need to delete the last month data from cube because One material is not updated with a Required value. We have made some changes in Update routine for a Value. The Same change must be reflected from last month of data ,
So I need to delate the data based on selection. And reload the data again. And the data flows from
                                           2LIS_13_VDITM (Info Source ) to ZSD_C03 (Info Cube).
I read many SDN threads, but I am getting confused.
How can I proceed for these ?
Thanks,
Utpal.

Hi Srikanth,
Thank you for responding.
I had a problem on one material. So deleted the request and Reload it from PSA. That issue got solved.
And Now the problem is , Now my senior is saying Delete the data from April-09 till date and Reload it. The issue is My CUBE ( ZSD_C03 ) is updated with 4 data sources. 2LIS_11_V_ITM   , 2LIS_13_VDITM   , 2LIS_12_VCHDR , 2LIS_11_VAITM .
And I need to delete data from 2LIS_13_VDITM data source . How Can I proceed for the current issue   ?
Please suggest   ...
Thank you ,
Utpal

Needs to delete one Master Data from main process chain in development syst

Hi All,
Can any one pls suggest how we can delete the master data load from main process chain in development system.
In the main process chain nearly i am having 52 master data loads in that i required to delete one master data.
Thnanks in Advance.
karuna.

Hi...
1) go to RSPC1
2) Give the technical name of the process chain
3) in the top where we write tcode....there write COPY..and press enter...
4) then remove the start process and the desired master data loads..
5) create a new start process with a new variant..if you want to put ant condition you can put it there...
6) then link the start process with the first process..
7) activate your process chain...and schedule it as per your require...you can make it immediate run or can scedule it for a particular time...
Or if you don't want to create anew process chain...then go to the design view of the PC and remove the desired load and again activate it...
Hope this helps you...
Regards,
Debjani...
Edited by: Debjani Mukherjee on Sep 4, 2008 4:35 PM

I need to delete existing website data created with FTP years ago...Why is this so HARD?

Similar Messages

Maybe you are looking for