I need to Delete the empty space page of report

I need to Delete the empty space page of report
http://imageshack.com/a/img540/191/nrOwz6.jpg
I Need Help!!
Thanks

Hi yha10,
Per my understanding that you want to add one textbox at the bottom of the tablix and make it display as the last on each page after the tablix, you have try to add the page footer but if there is little record in the report you will got some space between
the report footer and the last row of the tablix, right?
If you don't want to display the space and I suggest you don't use the report footer and you can take reference to the details information below to display the information as the last row of the tablix on each page:
Right click the Details in the Row Group and select to Add Group-->Parent Group:
and add this expression in the Group By:
=Ceiling(RowNumber(Nothing)/10)
(10 is the number of rows you want to display on each page)
Right click the row group to select the "Group Properties" and add page break by check the "Between each instance of a group":
Right click the first column which the Group located and select the Insert Row-Inside Group-Below:
Select the Entire Column1(Group) and delete columns:
Merge the entire last Row and type the information "I need to show on all the page" in it:
If you still have nay problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Similar Messages

How to change multitrack duration/delete the empty end?

Hey everyone,
I have cut a 5:01 multitrack session, but its duration is always 5:33, and the last 32 sec is empty.
How can I delete the empty space(last 32 seconds) at the end?
Plz look at the figure -- The selected area is what I want to delete.
Thanks~:)

You cannot remove it in the Multitrack view as Audition always defaults to leaving some space at the end in case any effects (like a long reverb) might hang over the end. It also makes it easier to add clips at the end of the view which is difficult if the end is bang on the end of a clip. However when you mix it down to a .wav file or export it there shouldn't be any empty space at the end of the new file.

TS1702 I need to delete an empty folder. I tried all of the possible things to delete it, but still whitout any luck. Restarted the phone, updated software, etc... Please help ! Thank you.

I need to delete an empty folder. I tried all of the possible things to delete it, but still whitout any luck. Restarted the phone, updated software, etc... Please help ! Thank you.

Try to drag an app into folder and then drag it out.
Or reset you iPhone. Hold down Power and Home buttons until Apple logo appears. Release and wait to reboot.

How do I delete an empty icon page on my iPhone

I have somehow inserted an empty icon page ahead of my normal first page of icons on my iPhone 5. iTunes shows the page at the end of the others, but even after syncing, the empty page is at the beginning, ahead of my search page. Does anyone know how to delete an empty icon page from the iPhone 5? It is so illogical to me that it can't be done from within iTunes by just hitting the Delete key, the way you'd expect it to work!
Thanks!

Go to Settings -> icloud and then you should see your icloud id, scroll to the bottom and select delete account, you are then able to add your new one.
Hope it helps
Lesoot

I need to install Mozella Firefox 2.0 to fill out a form that is not supported with the newer version that is installed on my PC. Do I need to delete the new version before using the older version?

I need to install Mozella Firefox 2.0 to fill out a form that is not supported to input info from the newer version that is installed on my PC. Do I need to delete the newer version before using the older version? If so, how do I delete the new version and install the older version?

If you just need it for one site you can use the portable version of Firefox 2 instead. You can install the portable version on a USB key, or if one is not available choose the custom install and install it somewhere on your hard drive. The portable version will not interfere with your current version of Firefox. You can get the portable version from http://portableapps.com/apps/internet/firefox_portable - the link for Firefox 2.0.0.20 is near the bottom of that page.

Changing the No of packages when we delete the Empty HUs in Delivery

Hi,
My requirement is to delete the empty handling units in the delivery. And at the same time, I need to update the no of packages as soon as we delete the empty handling units in delivery. I can delete the Empty handling units but the no. of packages are not updating in the delivery. Kindly suggest me any suitable BADI/BAPI or user exit for this problem.
Thanks in advance.
Regards
Ramesh.

these assignments can only be deleted logically in the corresponding transactions for processing the routings.For the user, they are no longer displayed, but they still exist in the database.The material master can only be changed after the routing has been reorganized.
please read OSS Note 60386 - Deleting the material allocation to routings
it has an alternative solution to archiving

How do I delete MacKeeper off my Harddrive? I downloaded the software and did a 'trial' fix (cleaning) but never signed up for a license. (Do I need to delete the software if I never subscribed yet to any use of it, and if so, how?)

How do I delete MacKeeper off my MacBook Pro Harddrive? I downloaded the software and did a 'trial' fix (cleaning) but never signed up for a license for full use. Do I need to delete the software if I never subscribed yet to any use of it, and if so, how?

Remove "MacKeeper" as follows. First, back up all data.
"MacKeeper" is a scam with only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
If you have incompletely removed MacKeeper—for example, by dragging the application to the Trash and emptying—then you'll have to reinstall it and start over.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Restart the computer.
☞ Quit MacKeeper before dragging it to the Trash.
☞ Don't empty the Trash. Let MacKeeper delete itself.
☞ Don't try to drag the MacKeeper Dock icon to the Trash.

I need to delete the entire browsing history so when i type in a webpage it soes not bring up previuosly visited sites. deleting the history does not do this. any one know how to do this

I need to delete the entire browsing history so when i type in a webpage it soes not bring up previuosly visited sites. deleting the history does not do this. any one know how to do this

Judy-
If Private Browsing doesn't do it, try Settings-Safari-Advanced-Website Data-Remove All Websitre Data.
Or changing Settings-Safari-Autofill to OFF.
You might also try Settings-Safari and Clear History and Clear Cookies and Data.
As you can see, there are several controls for Safari. Which one works depends on what your problem is.
Fred

How to delete the empty orders in v.06 tcode

Hi,
i am trying to delete the empty orders in V.06 transaction code, but it is not allowing to delete.
the same order is able to delete from the VA02 Transaction. so could you please advice me to delete from V.06 transaction.

Hello Ganesh,
i am trying to delete the empty orders in V.06 transaction code, but it is
not allowing to delete.the same order is able to delete from the VA02
Transaction. so could you please advice me to delete from V.06 transaction.
Please note that the T-code (V.06) which you have been using basically shows up all Incomplete Documents like Sales Order, Contracts, Inquiry. Pertaining to each document you will be able to see all the missing fields which are actually set as part of Incompletion Log.
There is no dirrect provision to delete Sales Document using this t-code without opening up the document in change mode...If incase you plan is to delete the Sales Document which are not complete, then use this T-code to extract all the Sales Document and then use MASS t-code to delete...
As per best SAP practice, deleting of Sales Document is not recommended at all, instead you can use REJECTION OPTION...
Regards,
Sarthak

Need help accessing the router web page. I have been tol...

Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanks

What router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM

I have a MBP 15" with iPhoto 9. When right clicking on icon in dock 3 iPhoto libraries come up; one empty, one with 35,000 photos and one with 30,000 photos. How can I delete the empty one and merge the other two without getting duplicates?

I have a MBP 15" with Iphoto 9. When I right click on icon in dock 3 iPhoto libraries come up; one empty, one with 35,000 photos and one with 30,000 photos. How can I delete the empty library and merge the other two without getting duplicates?

You can delete the empty one by dragging it to the trash ( test everything before emptying the trash)
Merging libraries requires iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - it is the only current solution to merging libraries
LN

Need to find the free space on storage server

Hi,
I need to find the free space on storage server through Java code, and even find whether web server has access to the storage server.
So please tell me how do i do that.

This will be through an API for your "storage
server". It would be helpful if you at least
indicated what this "storage server" is: a NFS? an
FTP site? something else?I forgot to mention that. Its NFS. Please let me know
clearly, what APIs I need to use and in simple how.How am I supposed to clearly know this?
Consult the documentation for your NFS system and figure it out. That's what to do.

I backed up then erased 118 gigs worth of photos, but my storage still says I'm full. I emptied the trash and rebooted but my computer won't recognize the empty space. What gives?

I backed up then erased 118 gigs worth of photos, but my storage still says I'm full. I emptied the trash and rebooted, but my computer won't recognize the empty space. What gives? I erased all my iPhoto pictures from the pictures folder in Finder so I could restore a backup from my Time Capsule. When I try to restore the library, I get a message that there's not enough room on my computer to restore. I have a Macbook Pro with 250 gig hard drive. I would greatly appreciate some help. Thanks!

If you're trying to add a large amount of data all at once, and you get an alert of insufficient space, then from the menu bar, select
 ▹ System Preferences... ▹ Time Machine
If the padlock icon is closed, click it to unlock the settings and authenticate. Turn Time Machine OFF, then back ON and close the preference pane. Restart the computer. Test.

If I am downloading a new version of an album that I already have in itunes, do I need to delete the older version before downloading the new?

If I am downloading a new version of an album that I already have in itunes, do I need to delete the older version before downloading the new?

No, you don't need to.

I am creating a request for proposal form and I need to add a commission structure field. I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?

I created a table using the ranking field and now I need to delete the "dots/buttons" and turn them into text fields, is this possible?

It sounds like what you are trying to do is edit the choices in a likert field to something other than the default radio button. This is not something that you can do in Formscentral at this time.
Andrew

I need to Delete the empty space page of report

Similar Messages

Maybe you are looking for