I need to disable WebGL on all my computers

For security reasons, I need to disable WebGL on several hundred Windows computers. Is there a registry entry I can set, or a DLL I can disable via software restriction policy?
See http://secunia.com/advisories/44972/

Look at cor-el's response in this link (a different pref): https://support.mozilla.com/en-US/questions/808176
and the pref to be set in this Mozilla blog post (last sentence under "Status" section: https://blog.mozilla.com/security/2011/06/16/webgl-graphics-memory-stealing-issue/
Also note that a fix for this is due to be out on 2011-06-21.

Similar Messages

Disable RDP to all Client Computers

Hi,
We have windows 2008 R2 Domain with 5 DCs and Client computers are windows 7, & windows XP.
I need to disable the RDP ( Remote desktop connection ) for all the client computers in the domain through GPO.
The policy should apply to only client computers. Not for the Servers.
Any Ideas please. ?
Regards,Ali

Hi,
You can create two OUs, one for servers and one for clients. Then, you can link different group policies to the two OUs.
Organizational units
http://technet.microsoft.com/en-us/library/cc758565(v=ws.10).aspx
Create a new organizational unit
http://technet.microsoft.com/en-us/library/cc785077(v=ws.10).aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

To move to iCloud, do I need to buy Lion for all my computers

To move to icloud, must I purchase Lion for each of my computers?

You can get iCloud email on Snow Leopard 10.6
http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html
BE WARNED!
10.7 will not run a lot of your older software, especially PPC based programs and hardware drivers for third party printers and such.
Some of this great older software can never be gotten again as some developers decided to bail when AppStore arrived, not interested in sharing 30% with Apple and being subjected to their many "changes" and control.
10.6 has Rosetta and it run PPC based software, Rosetta is not on 10.7.
DO YOUR RESEARCH BEFORE UPGRADING TO 10.7!!
It can cost you more in software upgrades, RAM requirements, new external hardware and possibly slow down your machine(s) if they are dated.
http://roaringapps.com/apps:table
Since 10.8 is right around the corner you may decide to either upgrade directly to 10.8 (if offered, I suspect Apple will to avoid 2 downloads) or wait to get it on the newer faster hardware than can handle 10.8 better than your current hardware.
My advice is if you have a Late 2010 or Early 2011 laptop you can upgrade to 10.7 no sweat, but anything earlier than that you may want to reconsider your options based upon your machines performance capability.
Original 10.5 era machines, those with only 2GB of RAM (4GB really is needed) are especially vulnerable to 10.7 performance and other issues it appears.
You may want to create a hold option key bootable clone of your present 10.6 install so it's easy to return to 10.6 if you don't like 10.7 or it slows down your machine, or software will no longer work.
Most commonly used backup methods
either that it's the complicated manual method
How to revert your Mac to Snow Leopard

I need to disable all constaints

i need to disable all constraints found in user aaa schema?
how can i do that in one statement
is there any one can help?

wrote:user_7000028
i need to disable all constraints found in user aaa schema?
how can i do that in one statement
is there any one can help?[http://www.adp-gmbh.ch/ora/misc/integrity_constraints.html]
You didn't mention what version of Oracle you're running.
a+
Paul...
When asking database related questions, please give other posters
some clues, like OS (with version), version of Oracle being used and DDL.
Other trivia such as CPU + Disk configuration might also be useful.
The exact text and/or number of error messages is useful (!= "it didn't work!"). Thanks.
Furthermore, as a courtesy to those who spend time analysing and attempting to help,
please do not top post and do try to trim your replies!

I need to disable popup blockers on my iPad 2. But when I go to the security settings it won't let me disable it. It won't even let me click on the button at all. What am I suppose to do ???

I need to disable popup blockers on my iPad 2. But when I go to the security settings it won't let me disable it. It won't even let me click on the button at all. What am I suppose to do ???

Kandisipad1 wrote:
Well let's see diesel dude I have an iPhone and I have to approve any apps thru iTunes to be loaded on my phone.
No, you simply do not.
Kandisipad1 wrote:
Also all of my info is backed up to iTunes and when I do upgrades on my desktop it's thru iTunes and all of my app purchase are stored and downloaded from iTunes
Okay, your point?
What does that have to do with the initial issue?
Do you actually know what the issue is, or are you simply rambling?

Need to disable Options Internet Options in CHM

I see how to disable the Options button, but I don't want to do that. I only need to disable the Internet Options menu item. Can anyone tell me how to do that?
This is required by several of our customers. Thank you.

Hi there
All I can say is that if that's an absolute requirement, CHM isn't your thing. That option is simply part of the CHM viewer application that Microsoft is in control of. No way to change that to my knowledge,
Cheers... Rick

SNR License Issue. How Can I Disable SNR for all Users?

Hi,
I Have an issue with SNR on CUCM 10.5 and with assignement of license type
I have a cluster with 400 users.
200 users use ip phone 3905 and should be use an Essential License.
When system check for assignement of license type , itassign a Basic License instead of an Essential License, because it see that users have SNR Enabled.
All users in my system have SNR enabled, and I can not disable it. All my user have Enable Mobility unchecked, and all my phone have Device Mobility Off, but system however see SNR enable.
How can i disable SNR for all users? This is a feature that client don't need.
I dont' have a sufficent number of licenses for support all 3905 in Basic License.
thanks for help.
Andrea

Well actually, Mobile Identity wouldn't apply to a 3905 unless those phones had another line on a Dual-Mode device like an iPhone or Android phone. So unless you have either of those in your system you can scratch that idea. Someone else may chime in here and try to help a bit more as RD/RDP are the main SNR culprits.

Need to disable/Grayed out Unreseve button for Order lines

Hi All,
In Back to Back order process once the order is progressed, the requisition will be created and Quantity will be reserved for PO to be received.
Some of our users want go and Unreserve this by the below methods.
1) Tools --> Scheduling --> Unreserve
2) Right Click on the order line --> Scheduling --> Unreserve
We need to Disable or Grayed out this Unreseve option for ATO Flagged lines.
Can anyone let me know if this is possible.

Ok , Ned , well your Guidance really worked , thanks alot for that.
I made it work , though since i am very new to AS3 , i really had to experiment , here is the final Code :
import flash.events.MouseEvent;
stop();
var note1:Mc_Notice1 = new Mc_Notice1;
var note2:Mc_Notice2 = new Mc_Notice2;
var notes:Array = [note1,note2];
//var count:Array = new Array(1);
var count:int;
count = 0;
btnload1.addEventListener(MouseEvent.CLICK , load1);
btnload2.addEventListener(MouseEvent.CLICK , load2);
function load1(Event:MouseEvent):void
addChild(notes[0]);
notes[0].x = 100;
notes[0].y = 100;
count ++;
trace("Counter Value:" + count);
if ( count == 2)
btnnxt.addEventListener(MouseEvent.CLICK , nextframe);
function load2(Event:MouseEvent):void
addChild(notes[1]);
notes[1].x = 100;
notes[1].y = 100;
count ++;
if ( count == 2)
btnnxt.addEventListener(MouseEvent.CLICK , nextframe);
trace("Counter Value:" + count);
function nextframe(Event:MouseEvent):void{
trace("Mouse Enabled");
nextFrame();
Once again , Thanks alot for the help and Guidance
Best Regards

Need to disable the submit button record wise

Hello all,
I have two blocks. Block A and Block B. Block B is a summary block which records will be displayed.
Block A is a Control block and i have a submit button in it.
Based on some records in block B i need to disable the submit button .I would be record wise.
Please guide regarding the trigger use on this
Regards,
\Kiran

Kiran,
You can write the code in the WHEN-NEW-RECORD-INSTANCE trigger of the block B. it will fire when you navigate to that record.
Hope this helps.
Regards,
Manu.

Need to disable next-generation Java plug-in for sccm deployment

hey all,
hope I have the right forum for this question.
I'm deploying Java 7 update 55 to users in our company and have discovered that we need to disable the next generation plug-in.
is there a way to deploy Java with the plug-in disabled? preferably a command that I can add to a batch file.
I've read about a registry hack (doesn't work based on feedback), but I'd prefer not to deploy a mass registry change company-wide.
any help would be greatly appreciated.
thanks for your time!

I'm deploying Java 7 update 55 to users in our company and have discovered that we need to disable the next generation plug-in.
is there a way to deploy Java with the plug-in disabled? preferably a command that I can add to a batch file.
I've read about a registry hack (doesn't work based on feedback), but I'd prefer not to deploy a mass registry change company-wide.
any help would be greatly appreciated.
Have you created the required deployment rule set?
https://blogs.oracle.com/java-platform-group/entry/introducing_deployment_rule_sets?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+orana+(OraNA)
This Symantec blog has several posts by JRE team members (they have 'Oracle' in their user id) about the issue and the above link is referenced from it:
http://www.symantec.com/connect/forums/how-everyone-addressing-forced-java-dialog-java-update-needed-your-java-version-insecure
This Symantec link discusses 'Updating Java through Managed Sjoftware Delivery Policy
http://www.symantec.com/connect/articles/updating-java-through-managed-software-delivery-policy

Need to disable tabbed canvas through personalization in standard form.

Dear Friends,
I need to disable one of the tabbed canvas (button), based on condition from another tabbed canvas..in oracle applications 11i
This is urgent requirment from 3 days im trying but im unable to do this...
could you please solve me from this problem...
Example (Original Requirement):_
In order Management, in shipping transactions, we are having lines and delivery tabs..etc
in that, if delivery name is not null in lines tab, then we need to disable delivary tab.....this is the actual requirement.....
Many thanks in advance,
Regards,
subash

Write a personalization that disables all fields on the delivery tab.
It should be similar to what you are looking for.
Sandeep Gandhi

Need to Disable Saving of Passwords in Keychain

Hello all,
At our company, we need to disable the saving of passwords in the Keychain for accessing network shares. The Macs are not network managed, so we have to do this for each individual Mac. Is there a way to do this? Thanks.

Not that I'm aware of, since the Mac OS X is inherently secure. All I can suggest is peruse Mac OS X 10.5 Security Guide, 2nd Ed

Need to disable Fast User Switching on multiple machines

Hi,
I have several labs with Fast User Switching turned on. I recently found out that it is incompatible with network home folders so I need a way to disable it on all of the lab machines. But from what I have seen the settings are part of ~/Library/Preferences/com.apple.systemuiserver.plist which means each user has their own setting for displaying the FUS menu item. Is there an easy way to shut it off system wide? Should I remove the USER.menu from /System/Library/CoreServices/Menu Extras ?
If you have a suggestion in the form of a script, or something ARD can do, that would be best.
Please advise!
iMac Core Duos (56) & PowerMac G4s (75) Mac OS X (10.4.7)

The first thing to try is this defaults command:
<pre>defaults write /Library/Preferences/.GlobalPreferences MultipleSessionEnabled -bool 'NO'</pre>
That should disable it system-wide, but the menu extra may remain. If so, you'll need to run a script (as root) on every machine. (see below) This script requires you to have a program called "PlistBuddy". This program is not installed by default, but it can be found in many Apple-provided packages. To find which packages have it, do "locate PlistBuddy" in a terminal. Then open the original package (or download it), and copy PlistBuddy into , say, /usr/bin.
<pre>
cd /Users
for u in *; do
rm -f /tmp/tmp-menus
if [ -d "$u" ];
uiplist="/Users/$u/Library/Preferences/com.apple.systemuiserver.plist"
cp -p $uiplist ${uiplist}.bak
PlistBuddy -c "Print menuExtras" $uiplist | grep -v User.menu > /tmp/tmp-menus
PlistBuddy -c "Delete menuExtras" $uiplist
PlistBuddy -c "Import menuExtras /tmp/tmp-menus" $uiplist
fi
done
</pre>
Usual disclaimer: I haven't tested the above script extensively, make backups, don't complain if it erases your hard drive, etc...
G5 Tower Mac OS X (10.4.2)

Why do we need a disabled AD object prior to migrating user from one domain to another.

Say i am migrating a user 'Mr.A' mailbox from abc.com to xyz.com in exchange 2010 environemnt, why do i need a disabled AD object for Mr. A in xyz.com prior to migrating ? please suggest.
Aditya Mediratta

Hi ,
To be frank i am not aware of quest but i can suggest you in ADMT and also in exchange cross forest migration.
I hope you are doing the cross forest migration from exchange forest to exchange forest , so on such case by using the prepare-moverequest.ps1 we can have
only have the disabled MEU on the target exchange forest until the remaining attributes of the user object was migrated from ADMT.
While running the prepare-moverequest.ps1 it will not completely move all the active directory user attributes from the source forest to the target forest
but it will move all the exchange attributes to the target forest and finally it will make the MEU object in the disabled state. Since
all the exchange attributes are already migrated to the target forest ,so prior to use ADMT user account migration we need to exclude the exchange attributes
by running the script on the ADMT server .After doing so exchange attributes will not be migrated but the required user attributes will be migrated to make the MEU to the enabled state.
Reference Link for types of exchange migration between the forest :
http://blogs.technet.com/b/exchange/archive/2010/08/10/3410619.aspx
Thanks & Regards S.Nithyanandham

Need to disable Proxies...

My internet satellite provider just did a repoint & modem reconfiguration on my system and I can't get into Safari at all (fails to load page). I called my provider and was told that i needed to disable my proxies.
When i go into system preferences.network or preferences>advanced>proxies... a small window appears "your network settings have been changed by another application"... when i press OK that window keeps coming back again and again
and I cant achieve the task and get up & running on Safari.
HELP ???!!!
thanks in advance

Well... looks like i figured out something
from this forum thread:
http://discussions.apple.com/thread.jspa?threadID=1715241&start=15&tstart=0
I was able to find the right "security" page and checked the "Require Password to unlock each secure system preference" then created a password.
It did disable that annoying loop and i just unchecked all the boxes and voila ! my proxies were disabled and Safari is now loading my pages.
Its a miracle really... you guys are so savvy
THANKS !

I need to disable WebGL on all my computers

Similar Messages

Maybe you are looking for