I need to discover my Any Authorised User Password

Someone set up my air book 5 years ago and there must have been a password. I can't remember it so what can I do?
Go to an Apple Store to try to set up a new one but not lose all my data?

Hi maximusshred,
If you are having issues with the account password on your Mac, you may find the following article and/or user tip helpful (depending on which version of the OS you are running):
OS X: Changing or resetting an account password (Snow Leopard and earlier)
http://support.apple.com/kb/ht1274
Reset the user password in OS X Lion, Mountain Lion and Mavericks
https://discussions.apple.com/docs/DOC-4101
Regards,
- Brenden

Similar Messages

Any user can unlock any other user password protected screen?

Major problem I'm having...!
On my Macbook Air - both myself and my wife can unlock each others password protected screen saver?
Surely this shouldn't be the case...?
We are both admin - but I would of assumed each could only unlock it's own user password protected screen saver.
Any help would be appreciated.

..."That doesn't make sense...as the login window is available from that password protected screensaver also..."...
The option to switch to the loginwindow only appears if the "Fast User Switching" GUI is enabled in the "Accounts" pref pane. If that option were to be disabled and eg. a user on a shared computer went home without logging out, in the absence of "admin" access, that computer would be entirely unusable to other users short of pulling the plug, which might interrupt any background operations in progress.
I suppose the behaviour could be alterred depending on the "FUS" status, but really, what would be the point since, as you acknowledge, an "admin" user ultimately has the ability to access an open session anyway?
For reference, note that "admin" users, in addition to the "session owner" are granted the right to unlock the screen in the "/private/etc/authorization" file under the 'system.login.screensaver' key so the behaviour can be adjusted from there.

Help!! Need to display current EBS 11i user password policy

I need to find way to display Oracle EBS 11i (Oracle Financial)'s current password policy for each EBS user account. Is there any way to do it? Can we run some SQLs to pull it off or need to run any report to do this.
Thanks advance

From the application, see (How To Setup Password Security? [ID 564125.1]).
From the database, see the docs referenced in this thread -- User profile report
Thanks,
Hussein

Need Report to see list of authorised users for a particular Trans.Code ?

Hai SAP Gurus,
Kindly tell me a Transaction code which is useful to see list of authorised users for a particular Transaction code. Ex J1ID
Reply me pls

Hai,
Using SUIM, I got List of authorised users for a particular Transaction code.. But Few Users who are not in the list can using the Same Transaction Code in BackGround.. How to see those users list..
Kindly Reply me pls

Need help in finding tcode - in user exits

hi experts
in user exits, i can find many exits name using <b>SPRO </b>or <b>SMOD</b>. and by this i can find the package also.
my question is how to know where these exits are exactly used, ie., in which transaction these exits are used.
is there any way to find out the tcode, if we know exit name.
thanks
akila

Hi
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
Reward points for useful Answers

How to create a new role : Need to send notifications to multiple users.

Hi All,
I have a requirement where in I need to send notifications to multiple users
and no. of users in the list is not fixed.i.e. this builds up dynamically.
Kindly let me know how do I achieve this.
Also wanted to know where form the Workflow roles get created i.e. who inserts data into wf_roles and wf_user_roles tables. Is there any UI to create roles and associate users with them.
Thanks,

Hi,
Yes - by default all responsibilities are defined as roles in the Workflow directory. You just need to identify the role that corresponds to the responsibility (look at ORIG_SYSTEM and ORIG_SYSTEM_ID columns, IIRC) and then send the notification to the role.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

I don't know what i need. I'am a mac user but i need to run quick books premier. This is the only software i need in windows 7. Could i have some advise in what is better for me, Bootcamp or parallels

I don't know what i need. I'am a mac user but i need to run quick books premier. This is the only software i need in windows . Could i have some advise in what is better for me, Bootcamp or Parallels

The Intuit rep said they don't "support" QuickbooksPremier on a "virtual machine." Do you know what I risk by using it, anyway? thanks for the advice about Boot Camp vs Parallels, BTW!
I use QuickBooks Pro for Mac, so I haven't had need to try any of the Windows versions in a VM. But I can't think why it wouldn't work. From within the VM, QuickBooks Premier would believe it is operating on PC hardware within Windows.
I would guess they mean that the multiple user support wouldn't work from within the VM. But I would think that would also work. Windows can see the Internet from within the VM, which means it can see your network. So if Windows can see the network, then QB Premier should be able to, too.
I know you can get Parallels as a demo, and maybe you could get QB Premier as trial software. So if you already have a retail copy of Windows to load into a VM, it would only cost you time to test what's possible.

Need to update resource name in user XML

Hi Friends,
I Need to update resource name in user XML. Suppose I have one user say 120120 and he has resource "ABC" assinged to him.
When I rename resource "ABC" to "XYZ" and search the user 120120, it is showing me "XYZ" resource is assinged to 120120. this is right.
But same thing that is resource "XYZ" is not getting updated in **User XML**.
Thanks,
Sun_SIM

Hi William,
I don't know of any standard report of Function module which will directly update the addrress of location , however you can develop a custom report for update of addreess of plant from R/3 to SRM using the Function module "BUPA_ADDRESSES_GET' , "BUPA_ADDRESS_CHANGE" and table 'ADDR'.
use " BUPA_ADDRESS_GET" to get address number using the partner id of location.
search on table 'ADDR" with the address number to get the address detail .
compare the address detail with the R/3 plant address.
use function module "BUPA_ADDRESS_CHANGE" to update the address.
hope this would help.
Please reward points for helpful answer.
cheers!!
Iftekhar Alam
Message was edited by:
iftekhar alam

I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help.

I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help. What do i do?

I have not contacted Adobe. I am using acrobat pro CC, and haven't noticed any problem with the software itself. The only problem I have had so far is when I try to download.

Are there any Mac user groups in central Louisiana?

I was wondering if there are any Mac user groups in central Louisiana.
I live in Alexandria and would like to meet any fellow Mac or i Mac users in this area.
Also, does anybody know where to get a power supply for an older i Mac?
Mine was built/bought new in 2008. It quit one day and will not turn on at all.
With what help there is around here, it is a Windows area, the problem was traced
to a dead power supply. The nearest Apple store is about 120 miles from me in
Baton Rouge. If there is a good online source for parts, please let me know.
Thanks for any help with either question.
charlybear

Here is the tool you need to find MUGs:
http://appleusergroupresources.com/find-a-group/

You don't have access to any End User Layer table

Hi
When I created a EUL using Discoverer admin, and also created a business area successfully, then I can't logon using same username in Discoverer desktop, My Discoverer version is 4.1.37. when I logon, I received error message read: You don't have access to any End User Layer table.
Could someone please give me some instruction, or guide me to do something.
.

Hi Prathima
You should not be able to connect to an Apps mode EUL as an end user in the end user tools.
As for administration, you need to log in as the owner of the EUL, a database user, and then assign admin rights to an Apps account. Many companies use the SYSADMIN Apps account for this purpose. After you have assigned an Apps user to have admin rights don't forget to grant that user admin privileges over each of your business areas.,
With this done you should then manage your Discoverer administration using the Apps account.
Page 14 to 20 of the document called Setting up an Apps mode EUL may help. This document is available for free from my website here: http://ascbi.com/downloads/downloads.htm
Best wishes
Michael

Little help for a novice - Need a ps script to list user with their email only.

Hi,
I need to extract every month the user list which have their email information on it, so i don't need to extract the user services etc from the AD.
Today, i'm using this script i made :
clear-host
Import-Module activedirectory
$CurrentDate = Get-Date
$CurrentDate = $CurrentDate.ToString('dd-MM-yyyy')
Get-ADUser -Filter * -server ad.test -SearchBase "dc=ad,dc=test" -Properties DisplayName,sn,givenname,Company,Description,EmailAddress | select DisplayName,sn,givenname,Company,Description,EmailAddress | export-clixml "C:\users_$CurrentDate.xml"
But like this i have every user of the ad even the ones without email.
Is there any filter to only extract theses one ?
Thanks for your help.

Hi,
Try this:
$CurrentDate = (Get-Date).ToString('dd-MM-yyyy')
Get-ADUser -Filter "mail -like '*'" -Server ad.test -SearchBase "dc=ad,dc=test" -Properties DisplayName,sn,givenname,Company,Description,EmailAddress |
Select DisplayName,sn,givenname,Company,Description,EmailAddress |
Export-Csv "C:\users_$CurrentDate.csv" -NoTypeInformation
Don't retire TechNet! -
(Don't give up yet - 12,420+ strong and growing)

I need to access one folder in user library folder from my time machine backup......but it won't show a library folder

I need to access one folder in user library folder from my time machine backup......but the backup disk won't show show a library folder.
Pressing option-go only directs me to the current library folder in my hard drive. I have opened up the saved disk image and need to copy one folder and put it into my current library. Trying to restore using time capsule won't let me into the user library either......
thanks in advance for any help
christos

The Saved Application State folder is where Lion stores all the information required for its resume feature to function as it does. As you are looking for a specific saved game folder it will not be in the Saved Application State folder. This folder was not present in Snow Leopard so wouldn't be present on your backup previous to the Lion install.
The game saves you're looking for will most likely be located in the Application Support or Preferences folder.
Hope this helps
J.C

Urgency Restrict No. of session for any particular user

Hi All.
Can we restrict any particular user no of session that if his nos. of session exceeded from 3 then all of his session should be killed.

Thanks for reply.
Currently I have a default profile for all users and resources of this profile are as follows:
Resource Name Type Limit
COMPOSITE_LIMIT     KERNEL     UNLIMITED
FAILED_LOGIN_ATTEMPTS     PASSWORD     UNLIMITED
SESSIONS_PER_USER     KERNEL     UNLIMITED
PASSWORD_LIFE_TIME     PASSWORD     UNLIMITED
CPU_PER_SESSION     KERNEL     UNLIMITED
PASSWORD_REUSE_TIME     PASSWORD     UNLIMITED
CPU_PER_CALL     KERNEL     UNLIMITED
PASSWORD_REUSE_MAX     PASSWORD     UNLIMITED
LOGICAL_READS_PER_SESSION KERNEL     UNLIMITED
PASSWORD_VERIFY_FUNCTION PASSWORD     NULL
LOGICAL_READS_PER_CALL     KERNEL     UNLIMITED
PASSWORD_LOCK_TIME     PASSWORD     UNLIMITED
IDLE_TIME     KERNEL     UNLIMITED
PASSWORD_GRACE_TIME     PASSWORD     UNLIMITED
CONNECT_TIME     KERNEL     UNLIMITED
PRIVATE_SGA     KERNEL     UNLIMITED
resource_limit parameter in initprod.ora file is set to FALSE.
Now first of all I need to alter resource_limit paratmeter to TRUE with scope=both.
Then need to create a new profile and define sessions_per_user 3.
My question is that whether I have to define all default profile resources in the new profile or not?
Do I need to grant create_session priviliges to every user after assigning new profile?
Can I assign both profile to a single user?
Brgs.
Hassan

Need to autologin log in as user after MDT completes

Need to autologin log in as user after MDT completes. Can you assist with helping me achieve this? This is a must have as some software we use must be installed as the user after the machine has been imaged.
Thanks,
Michael

AutoLogon from Sysinternals is only telling half the story.
Although, technically yes, the value is "encrypted" in the registry.
It must be made clear that *any* administrator *can* extract the plaintext password saved using AutoLogon using a couple of LSA Win32 API calls: (see
http://securityxploded.com/defaultpassword.php)
Keith Garner - keithga.wordpress.com
Of course, any physical access to a machine is a risk. If you are not a admin on the machine you can simply create a bootdisk and grab what you need from there. I guess this is why it's important to encrypt your disks.

I need to discover my Any Authorised User Password

Similar Messages

Maybe you are looking for