I need to download Mac OS X install Disc 2 Version 1.0 2z691-5862a

I need to download Mac OS install Disc 2 Version 1.0 2z691-5862A

Install disks are not available for download.
Call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.

Similar Messages

  • TS2570 Question re: "Start from your Mac OS X Install disc; use Disk Utility"

    I've worked my way through the step-by-step trouble shooting in the TS2570 article up to "Start from your Mac OS X Install disc; use Disk Utility". So far, every step results in the same outcome - my formerly trusty 2007 Intel duo core iMac (24") will not start up, freezing on a grey screen with a blinking question mark on a folder. I don't completely understand this next step. I have both a Leopard and a Snow Leopard disc. I'm not positive whether these were for the iMac, or my old Macbook Pro. I assume this makes a difference.

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    A flashing question mark or globe appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    b. Boot drive's directory has been corrupted - Repair with Disk Utility.
    c. Critical system files are damaged or deleted - Reinstall OS X.
    d. The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Error Message -may need to download Photoshop camera raw plug in version 7.3 for full compatibility

    I have been working in Lightroom 4.3 for MAC. From there I open 2 files to edit in Photoshop as layers so I can add a layer mask to the bottom layer and use the paint brush tool to make certain areas of the image darker or lighter. I have been doing this with no problem and now it doesn't seem to work. I can see the brushes' strokes on the layer mask but can not see the results on the image.
    I keep getting a message from Lightroom saying I may need to download Photoshop camera raw plug in version 7.3 for full compatibility whener I try to edit on Photohsop thru Lightroom, but I have already added this plug in and it asks for it. It happens with raw, jpegs and tiffs from my 1D Mark II or my 5D Mark III and with other people's camera. It used to work fine. Now it dosen't I feel like it is something so simple. Please help. This si crucial to my business.

    The wording of the message about ACR 7.3 is a bit misleading: What it means is that ACR 7.3 is required for Photoshop. Lr 4.3 has got it.
    Which version of Photoshop are you using?
    I suspect it's not CS6 but a prior version. If it is a version prior to CS6 you cannot install ACR (Adobe Camera Raw) 7.3.
    You may have downloaded it but you cannot install it. It doesn't install.
    On the other hand Lr 4.3 is based on ACR 7.3. So you have an incompatibility of ACR versions: 7.3 in Lr 4.3 and an earlier-version-ACR in Photoshop.
    With this situation Lr an dPhotoshop are not fully compatible, i.e. you cannot open images as layers. You can only open one image at a time, either by letting Lr 4.3 render the PSD (or TIFF) and sending it to Photoshop (by selecting <Render using Lightroom>), or you let Photoshop open the Raw file with its earlier version ACR (by selecting <Open Anyway>).
    In this situation you have two choices: Either upgrade to CS6, or open images in Photoshop one at a time and vonvert to layers in Photoshop.

  • Installing Mac OS X Install Disc Pls Help

    I am thinking of re-installing mac os x install disc (is it call leopard?) on my macbook, will the re-installation erase all my present photos, contacts and documents in my macbook?
    Message was edited by: fabiantec

    If you do an Erase and Install, then all your data would be lost. You can try the following instead:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Disk Utility repair and Mac OS X Install Disc not at hand

    Help needed!
    If i click "verify" in Disk Utility, i get "The volume Macintosh HD needs to be repaired." as answer. However "repair" needs to unmount the volume which is not possible because it's the system/boot partition.
    Currently, I dont have access to my mac os x install disc (DVD), which could be used to boot from and run disk utility. The dvd is locked away in my office in another country.
    Is there a way around this? Either by running disk utility's repair function while the system is booted or else by manually creating a boot cd/live cd?

    Yes, possibly.
    Boot into single-user mode. After startup is completed you will be in command line mode and should see a prompt with a cursor positioned after it. At the prompt enter the following then press RETURN:
    /sbin/fsck -fy
    If you receive a message that says "*** FILE SYSTEM WAS MODIFIED ***" then re-run the command until you receive a message that says "** The volume (nameofvolume) appears to be OK." If you re-run the command more than seven times and do not get the OK message, then the drive cannot be repaired this way.
    If you were successful then enter:
    reboot
    and press RETURN to restart the computer.

  • Trying to reset administrator password by using the Mac OS X Install disc to reset but it won't allow me to without original administrator password. Frustrating.

    Trying to reset administrator name/password by using the Mac OS X Install disc to reset but it won't allow me to without original administrator name/password. Frustrating. Reason I'm trying to reset is that it seems to be not recognising the administrator name as have changed password in System Preferences - Accounts.
    PowerMac, Mac OS X (10.5.8)

    Here's the instructions if you have the discs.
    *Mac OS X: Changing or resetting an account password*
    http://support.apple.com/kb/HT1274?viewlocale=en_US
    Changing your administrator password
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh655.html
    Here's one method to reset the password without the install disc:
    1. boot computer and hold the "apple" key and the "s" key.
    2. wait for terminal show
    3. release keys
    4. type without the quotes: "/sbin/mount -uaw"
    5. press enter
    6. type without the quotes: "rm /var/db/.applesetupdone
    7. press enter
    8. type without the quotes: "reboot"
    9. press enter
    This will let you create a new admin account when you reboot your computer.
    Also, without the discs, look at Mac OS X Tip - No Password, No Root, No CD? No Problem.
    http://www.macobserver.com/tip/2003/06/16.1.shtml
    Without the discs, try this (OS 10.5 only). *How to Reset User Password via single user mode*
    http://macosx.com/forums/howto-faqs/300019-howto-reset-user-password-via-single- user-mode.html
    Here is a way to get around not knowing the admin password on Macs.
    To reset your OS X password without an OS X CD you need to enter terminal and create a new admin account:
       1. Reboot
       2. Hold apple + s down after you hear the chime.
       3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
              * mount -uw /
              * rm /var/db/.AppleSetupDone
              * shutdown -h now
       4. After rebooting you should have a brand new admin account. When you login as the new admin you can simply delete the old one and you’re good to go again!
     Cheers, Tom

  • Is Mac OS X install media on Mac OS X Install Disc 1 or 2?  I have to reset my password because I forgot it.

    I need to retrieve my password.  It directs me to install insesrt the Mac OS X install media.  I have MacBook Mac OS X Install Disc 1 and 2.  Can somewhat direct me as to which intall disc I should use?  I don't want to mess up.Install disc 1 tells me to hold down C key as computer starts up which is what the reset password direction tells me to do.  Thanks for help! 

    Ok.  I put in install disc 1, restarted etc.  Went to utilities >reset password etc.  It would not save it for the Systems Admin root.  I tried four times including rebooting...the message said not save or general something didn't work.  grrr...any ideas?  thanks again for your time.

  • Missing Mac OS X install disc 2

    Hello there I have install my iMac I have install disc 1 and after disc one is asking me please insert the Mac OS X install disc 2 witch I don't have is there any other way I can get my iMac back to live thank you

    Okay,
    If you are missing one of the install discs, there are two things you can do.
    You need to contact Apple in order to get OS X 10.4 Tiger or OS X 10.5 Leopard from Apple assuming they still have copies.   Apple Store Customer Service at 1-800-676-2775  These discs will be replacement OS install discs.  You will need to give the rep your Mac model and serial number and you'll, also, need a credit card as there is a nominal fee of around $18 for processing and shipping of the disc.
    If Apple can't help you, then you can search on sites like Amazon for OS X 10.5 Leopard disc.
    OS X 10.5 Leopard is the last OS X version that you can run on a PowerMac G5.
    Good Luck!

  • Mac OS X Install Disc 2 won`t work

    My Mac OS X Install Disc 2 won`t work

    Hello,
    That second Disc thing happens frequently, the best way around it is to do a Custom install, and eliminate enough Printer Drivers, Languages, Fonts, and Applications you don't need... then it may skip #2 altogether.
    http://support.apple.com/kb/HT1442

  • Does a Macbook Pro 13 inches (Mid 2012) come up with a Mac OS X install disc?

    Does a Macbook Pro 13 inches (Mid 2012) come up with a Mac OS X install disc? What if some problems will occur regarding the OS? How can I fix it? Thanks.

    kennethlovesu wrote:
    Does a Macbook Pro 13 inches (Mid 2012) come up with a Mac OS X install disc?...
    No. Macs that came standard installed with Lion or later don't come with media, and, indeed, some don't even come with DVD drives to run media in.
    ...What if some problems will occur regarding the OS? How can I fix it?...
    Such Macs come with a hidden recovery partition. You can boot from that and restore the OS if that's what's needed, or run Disk Utility to repair the HD. Check out http://support.apple.com/kb/HT4718 for details.

  • Mac OS X install disc not installing drivers in Windows 7

    So I just installed Windows 7 Ultimate OEM 32 bit, and everything went (relatively) smoothly...
    The problem is that now I'm at the desktop and when I insert the Mac OS X install disc, I am not able to install drivers. Instead, I am prompted to either "remote install Mac OS X" on my MacBook Air or install DVD and CD Sharing on my MacBook Air. I don't own a MacBook Air nor have I ever used either the Windows 7 install DVD or the Mac OS X install DVD on a MacBook Air. What's going on, and how else can I install the proper drivers? Also, please note that I used the Mac OS X install disc to install drivers for Windows XP previously. Long story short, that installation expired (lost my CD key) so I had to start over with Windows 7. I know the drivers are there, why aren't they working?

    Sorry to state the obvious first, is it a Snow Leopard DVD?
    You can always browse the DVD to the correct folder for the drivers.

  • Mac OS X Install disc

    Are all Mac OS X Install discs (10.6 to be exact)
    exclusive to the computer they came with?

    Hi Folks;
    I have a related question:
    On each disc there is an installerscript that checks the Mac Computer if the DVD is allowed to install on that particular Mac. Before 10.6.1 I was able to find the place on the disc (somewhere in some hidden file) where You could find for what Mac the installation was permitted. That way You didn't have to investigate with "trial and error" to see for which Mac a set could be used. But after 10.6.1 The place/method? has chanched. If anyone could tell me how to discover this again I would be very happy. Special challenge for TechGeeks!
    Greetings from the Netherland!

  • The mac os x install disc 2 doesnt run.........

    the mac os x install disc 2 doesnt run...........what can i do.??...im trying to erase and reinstall all system......but i cant....the disk #1 run ok..but the other one doesnt....
    Thanks

    Hi M.s.
    In your first post, your specs are posted as ibook Mac OS X (10.4.6).
    In your second post, they are macbook pro Mac OS X (10.4.6.
    And you have posted your Topic in the Mac OS X v10.3 & earlier forum.
    Which version of OSX are you trying to install on the iBook G4, and what type of discs are you using?
    The original discs that shipped with the iBook, or a Full Retail Version Jaguar, Panther, or Tiger?
    If you are using the Tiger system install discs that shipped with your MacBook Pro, that would explain why the installation is not successful.
    Model Specific discs, will very seldom work. And the discs that shipped with the Intel MacBook Pro will definately not work in the iBook G4.
    ali b

  • Boot From Mac OS X Install Disc

    Hi everyone after messing my computer up I am now trying an archive and install !!!
    Trying to boot up from Mac OS X Install Disc (labelled For Mac Computers) by pressing down the 'C' key whilst booting up. Everytime I do this the computer just restarts it self over and over again
    Can anyone tell me what I am doing wrong or if something is wrong with the disc
    Thanks everyone

    Hi jackVDP;
    It sounds like you aer using the generic Leopard DVD. Could it have an older version of Leopard that your Mac had originally? If so the Mac will not boot .
    Why are you not using the DVD that came with your Mac?
    Allan

  • Intel iMac install disc versions

    I have a big favor to ask of all you forum members. I have install media from different intel iMacs that I need to distinguish from one another. As far as I know, the discs from a 17" iMac with integrated graphics will not work on a 17" iMac with Radeon X1600 graphics, nor will they work across the Core Duo to Core 2 Duo bump. I'm looking for the AHT and any other distinguishing information from these discs so I know which iMac they belong to. Here's what I know so far:
    17" Core Duo w/ integrated graphics:
    • AHT version 3A108, Disc version 1.0, MacOS 10.4.7
    17" & 20" Core Duo w/ Radeon X1600 graphics
    • AHT version 3A100, Disc version 1.1, MacOS 10.4.4
    All other models I do not know. Can those of you with other models post your install disc versions? I'm looking for all the intel iMac version from when they were released (though I believe I have the first generation above) through the iMacs available right now, as we have all kinds on our campus. Please include the disc 2 version (the 2Z691-xxxx-x number) as well.
    Thank you to everyone who can contribute!
    17" Intel iMac Mac OS X (10.4.9)
    17" Intel iMac Mac OS X (10.4.9)
    17" Intel iMac   Mac OS X (10.4.9)  

    Unfortunately I can't give any detailed information since I only have the original iMac CD (disk version 1.0) but until others chime in, here's some information that might be helpful.
    AFAIK, it should be possible for the latest version of the OS/Install to work across all iMacs but not the reverse (my original DVD will not boot one that requires a more recent version of the OS or the newer C2D architecture). That being said, each install media set should have the OS version appearing on the disc. You may be able to deduce (or narrow it down) by comparing the OS version and the time the specific iMac model was released. The more recent the Mac revision, the more recent the OS (or at least that is usually the case).
    10.4.4 January 10,2006
    10.4.5 February 14, 2006
    10.4.6 April 3, 2006
    10.4.7 June 27, 2006
    10.4.8 September 29, 2006
    10.4.9 March 13, 2007
    The Core Duo iMac debuted in January 2006 and should have (initially) come with 10.4.4.
    The Core 2 Duos debuts (I believe) in September of 2006 and likely shipped with 10.4.7 (or 10.4.8 although the first one is more likely).
    Not much help, I know, but it's a start.

Maybe you are looking for