I Need to Embed Fonts in my PDF

Hi,
I am trying to upload a pdf into a website but they say there is an error that's stopping the process from going ahead. Apparently I have to embed the fonts in my pdf first.
I've done quite a bit of online research and found several ways of doing this - none of which seem to be possible to me!
Is there a way that I can embed fonts without having to buy something? I have Adobe Reader, Digital Editions... but I have no idea if I have anything else (Acrobat?). I haven't deliberately bought it, but this is a brand new top-of-the-range, expensive laptop so I don't know if would have already been installed? Windows 8.2 means that it's harder than ever to navigate your way around the computer.
Thank you in advance,
zengirluk

I have Adobe Reader!
I just made a document in word and saved it as a pdf.
I have downloaded the trial version and gone through the steps as described here:
https://lvb.wiwi.hu-berlin.de/doc/embedfonts.pdf
Now about to upload to the website... I'll let you know if it's worked. I have a feeling it won't have because I don't have a printer and didn't print it out. The method described above wanted me to print the document out. However I don't want or need to. I just want to embed the fonts so the website accepts my document!

Similar Messages

Not embed fonts saving as pdf

Hi everyone
Just a quick question.. before I start to dig myself.
We save our LC design forms in the source format .xdp. When we publish them we select File > saveAs and choose dynamic pdf.
but LC designer will always embed fonts in the pdf. We have to open our pdf in LC designer a remove 'embed font' under File > Form properties (this can only be fone to a pdf, so we need an additional save as ZZZZZZZ).
Question:
Anyone have solution on setting LC designer ud to not embed fonts when saving and xdp to dynamic pdf? is the a config file or registry setting to edit?
help is very welcome
Regards
Thomas Groenbaek, Form Expert
Jyske Bank

hi Jyske,
What you can do is to add the following line in the .tds (template) files that Livecycle uses:
<?templateDesigner SavePDFWithEmbeddedFonts 0?>
and this just before the closing </template> element in the xml source.
You find these templates in the <Livecycle Designer Installation folder>\EN\Templates
Regards
RonnyR

Can I embed fonts in a pdf document?

I wish to publish a Pages document and to do this I need to convert it to pdf and ensure that my fonts can be embedded into the pdf document. I am not sure how to proceed. How do you embed fonts in PDF from Pages 4.1?

Preview does a nice job of embedding fonts. You can open a pdf with non-embedded fonts in Preview and then print->save as pdf creates one with fonts embedded. I had seen this in MacOSX Hints originally and it works for me.
For seeing what fonts are embedded (or not), pdffonts is a very nice utility, which i think now comes with poppler, or you can build from their git.

How can embed fonts into a PDF? Additionally, how can I make so that the PDF then opens with the embedded font?

I need to embed a standard font (such as Times New Roman) and make it so that the document opens with this font presented. I see information on embedding fonts, but nothing related to the second part of my question. Thanks.

The second part is automatic. If you manage to embed a font (for example with Preflight in Acrobat Pro), then a PDF viewer should use that. In some cases a locally installed font of the SAME NAME might take preference, which is only a difficulty if a private edited font is used.

Cannot Embed font into InDesign PDF

I am on ID CS5 Win7 and when exporting to PDF smallest file size get this message. I bought the font form Comicraft and used it before In Ilustrator without probolem, but this is my first time using the font in InDesign.
Now I am just trying to send a pdf for client review, and can probably find a way to bitmap the pages font. My main concern will be how can I make a pdf-X for final printing?

Mike Gondek2 wrote:
Comicraft replied back sayng that their fonts can be embedded. I believe my problem is that I converted the font to PC and Fontlab turned that option on by default for a .ttf font. Unfortunately looking into their liscening agreements I cannot convert their fonts to another platform, so will have to convert this ID file over to mac and work on my slower older mac system to finish off this client approved job.
I was surprised to find out that Comicraft allows
Once a design is approved for release I need to send this to a printer to print.
Can I?
Send a copy of a font to a printer only so they can image the file? This is what most all printers request, only very few accept PDF-X.
Embed the font into a PDF, and send the PDF?
Outline the font and send this legally (hate to do this cause file size gets so large, and occasionally I have them do small type changes).
RESPONSE: Any of those options are fine. If you send the fonts, please remind them to delete them when the job is finished.
thanks!
This probably differs per vendor, but wanted to share what I found out.
That's seems in direct contradiction to the information on the FAQ page. I did see on the site that they would sell you a version for the new platform for 20% of your original cost -- I'd opt to get an OpenType version.

How to embed font into generated PDF?

Hi,
I have an issue with cyrillic fonts in PDF-file, generated from smartform using the following mechanism:
1. Run FM for smartform with ==> getotf = 'X'
2. Perform CONVERT_OTF retrieving result into a XSTRING.
3. Converting xstring content into a table using "cl_document_bcs=>xstring_to_solix).
4. Creating mail to an external internet user with attached pdf ==> using "cl_document_bcs=>create_document..."
Smartform contains cyrillic content, based on HELVCYR (Helvetica cyrillic) font. Application server is based on Windows.
Everything worked well (for months!) for allmost all of the clients of our customer. Of course, some of clients have different OS-es (such as Linux, Mac OS, etc.), and then the problem starts - they doens't view properly the cyrillic content. English content (even numbers, etc.) are properly displayed. We found what fonts are used in the PDF, but my questions are:
1. Is it possible to embed the font into generated PDF-content?
2. If no, is it possible to generate PDF-content non-selectable (i.e. in some image mode) ?
If yes, how to do this?
Or is there any other way to workarround this issue - to be able to display mail with attached PDF-content with cyrillic on different OS-es? It would be better if it is possible without calling external converter...
Any help would be highly appreciated.
Thanks in advance.
Regards,
Ivaylo Mutafchiev

Hello Ivaylo Mutafchiev,
There is no way we can control the fonts in the created PDF / while creating the PDF using the class cl_document_bcs in your PDF creation logic.
You can try some other approach of creating PDF from the Smartforms OTF stream data .
Try using the follosing FM for the PDF creation and sending email:
CONVERT_OTF_2_PDF
CONVERT_OTF_AND_MAIL
SO_OBJECT_SEND
CONVERT_OTF_AND_MAIL_NEW (Try this but this FM still uses the class that you are using currently. But give it a try and see the results)
Hope this answers your question.
Thanks,
Greetson

How do you swap out an embed font in a PDF form

Here is my problem, I am trying to get ride of a specific font in a PDF form file.
Before I applied this font "SimSun-GBK-EUC-H(Embedded Subset) the file was roughly 150KB. After I applied this font the file size increased to 800 KB. The major problem is this font requires an extended language pack to be installed, in order to fill out this PDF form. My computer is installed so it won't be an issue so me, however it will be a huge pain in the butt for the public who usually don't have the extended language pack. I have already finished editing the rest of the form, I really hope there is a way to swap out this font within something else.
Any suggestions?
Update
I decided to redo the form from beginning, just by a small little mistake I added a reset button that uses a different font, now the file size jumped from 150KB to 1.2MB.
I check the file and found 92% of the file size is occupied by Fonts. How do I get swap the font? How do I optimize it?
Thanks!
Thansk!

By Popup do you mean a link that when clicked causes a separate topic to be displayed in a seperate window (popup) or Drop Down text?
For Popups that are displayed in a new window then the font and colour is changed in the topic that is displayed. Simply open the topic and change colours / features as required
If you are using drop down text and confusing this with a popup then the font and colour is changed when creating the drop down text. Right click the text and select Font to change colour etc.

Is it possible to embed fonts in a pdf without all the tools?

I'm preparing a book manuscript for publication (self-publishing/print-on-demand) -- and trying my best to do it on a shoestring budget of zero.
It's ready to go. I designed the cover with Pages 2.0.2.
The manuscript is in MS Word X for Mac.
But...it looks like I need Adobe tools in order to embed the fonts before uploading.
Anybody know a way around this?
Thanks

If you print to PDF, all fonts that can be embedded are embedded by default.
Some fonts have copyright restrictions, that makes it impossible for Mac OS to embed them. Some print-on-demand services, like Lulu, have had problems with the way Mac OS embeds fonts in the past. I do not know if that is still the case.
You can check which fonts are embedded in the free Adobe Reader.

How to embed fonts in a PDF

I have a book which uses Garamond Light Italic and Helvetica light Oblique. Only 2 styles of 2 fonts.
The printer wants me to embed the entire font families with the PDF files.
My problem is that I don't know how.
All I know is that it will only embed the files being used in the document.
Should I include one letter of each style of each of the 2 fonts, so that the computer will know which fonts to embed?
Or, is it as simple as entering 100% in the Subset font below window?
I'm certain there must be a better and easier way.
Also, it there a way of verifying that the proper fonts have been embeded?
Please, I need your advise.

LilyLC, All seems to have come to a conclusion this afternoon.
It seems that when I create individual pages, make PDFs of them and then merge them with PDF merge, what's happening is that the fonts are being embeded with each page. Apparently the RIP gets confused with all the fonts embeded and substitutes courier.
The printer recommends that I save the entire book as one document, and convert that document into one PDF file, thereby, embending the fonts once.
They guarantee that the book will print properly if I follow the above.
I had been reading through the printers vast instructions and noticed the paragraph relating to this problem, and they confirmed it.
They sent me a print out of the fonts embeded in my book and the 2 fonts were repeated for each page, 32 times.
I called Quark about a distiller (whatever that is) and the Custom and Roman encoding. Their answer was that none of it was Quark related. I would have to speak to Adobe.
I was made to understand that the only reason I would need a distiller is if I had postscript files to convert into PDFs. Since I was generating PDFs directly there was no need for the distiller.
I don't know how they print these books, other than the covers print RGB and the inside in CMYK. I always convert the CMYK photos.
I've been satisfied with the quality of their printing and the people, that's why I went through all the trouble to solve the problem.
I enjoy writing books for my 2 grandchildren. I've done 8 books in the past year.
You've been a big help, in that you persevered and explained in easy to understand language.
Again, thanks for all your help and to Limnos who made the original suggestion. I guess you can go back to enjoying the rest of the summer.
I will now make some reference notes for the future use.
If, by any chance this doesn't work out I'll will be posting back for additional help.

Embed Fonts in Keynote= PDF

I've created a Keynote presentation in the current version of the application, which uses two non-standard fonts, Chalkboard and Chalkduster. I have exported the presentation to PDF and put it on a web-server so other people can see it. But the fonts defaut to Helvetica or something, on machines which don't have those fonts installed.
Is there any way to embed or render these fonts so that the presentation appears as it does on the originating machine, when it is exported to PDF and viewed via a PDF reader on a Web Browser?

That's very civil of you! But unfortunately, the Keynote version as presented had a number of embedded MP4 movies, so it is much too big to email.
Actually on further investigation, if I create the PDF version and send it from my MacBook to the iMac, the fonts are embedded and do display OK. But, when I uploaded the PDF version (in which the movies were replaced with URLs) to the server via FTP, then the fonts wouldn't render properly in Firefox or Safari, when opened on the iMac. They would default to Arial, although with very odd spacing, which looked terrible.
On this occassion, I will not continue with trouble-shooting as it was a presentation for a very small audience and possibly nobody will even access it, however if I need to repeat this procedure I will look into it further.
FYI if anyone is interested, it was called 'A Brief History of Western Zen', given at the Buddhist Library in Sydney, and the url is http://www.dynamicdata.com.au/pdf/Brief%20History%20of%20Western%20Zen.pdf

How to Embed fonts in existing PDF file

HI,
I want to know how to embed the fonts in an existing PDF file, i do have Acrobat.
Thanks

Post your question in the forum for Acrobat.

How to embed fonts in a pdf file

I have a pdf that has some fonts not embedded. I think that distiller might be able to embed the fonts when I print the pdf file, but it is inconvenient and may not always work. Is there a direct way to embed the fonts in Acrobat? Thanks!

Bernd Alheit wrote:
Read this:
http://www.ehow.com/how_6566713_embed-fonts-pdf.html
I have the somthing like the following in Ctrl-D Fonts. They can not be embedded using the method above. I guess it is because the fonts in the original pdf are not available in the system. But how to embed the substitutes in the pdf file.
Helvetica
    Type: Type 1
    Encoding: Custom
    Actual Font: Helvetica
    Actual Font Type: TrueType

Cannot Embed Font into Indesign PDF (Thread 2)

This is related to;
http://forums.adobe.com/thread/866017
I have a font created over 13 years ago which comes up the error shown in the thread above. I have contacted the author who does not know how to take the flag off and is happy for it to be modified.
Have tried;
http://stateofidleness.com/2010/10/download-ttfix-ttfpatch-gui-supplement/
and it does not seem to work unless Im doing it wrong. Any thoughts or anyone else want to have a go at it. Haven't been able to find a replacement font.
Best

Is it an OpenType or Truetype font? If so, what are the permissions in "Font embeddability"?
The TTF Patch you link to is technically illegal, but then again if the font creator doesn't know how to change the flag -- it's a simple checkbox in most font editors --, what can one do? Anyhow, it should have worked if the only thing wrong with the font is that this flag is set.

How to Embed Fonts and make Grayscale in Acrobat Pro 9 PDF

I supplied my printer with a PDF but he says that I need to "Embed The Fonts" in the PDF.
I made the original document in MS WORD and then I created the PDF in Acrobat Pro 9 but nowhere
along the way did I see anything that asked me to Embed The Fonts.
He also says that the type is in RGB but it needs to be in Grayscale.
When I created the PDF I didn't see any option along the way that gave me a choice between
RGB and Grayscale.
Any ideas how to achieve these two effects while going from an MS WORD document to a PDF using
Acrobat Pro 9 please?
Any help would be much appreciated.

Sorry to bother you with my problem but I wondered if you could explain a little bit more about things I didn't understand.
1 - you said > On a Mac there is no advantage to using the Word plug-in.
Do you mean that I can type directly into Acrobat?
I thought that a document needed to be created in a word processor first before I could turn it into a PDF.
Is that incorrect then?
2 - > Create the pdf file a print file menu gives you greater control.
I do apologize but I did not understand this statement either, could you please expand on it a little (to a non-techie.)
3 - > If you use the Press job option setting, the fonts will be embedded.
I can't find Press job option setting anywhere - I am using Acrobat pro 9 but there doesn't seem to be a menu with Press
anywhere, could you please expand on this a little bit too please.
4 - > If the pdf file has already been created it can be converted to greyscale using the Preflight or Convert Colors
under Advanced -> Print Production.
I understood this part and I executed it according to your instructions so thank you for that.
Unfortunately I couldn't find out how to embed my fonts and my printer charged me $75 to do that
so I was pretty upset about not being able to understand that part of your explanation.
Since the printer was able to embed the fonts in a document that was already a PDF then it must be possible
to embed fonts after a PDF has been created, is that correct?
If that is correct then i don't know how I could not find how to do it because I looked everywhere for that
ability but I could not find how to do it.
I'd be very grateful for any further help you could give, thank you.

How to embed fonts in an existing pdf document

PDF Documents I am creating and emailing to my clients are showing up missing bargraps and text. I suspect embedding is not working. Is it possible or even needed to embed fonts in an existing pdf document? Or, is that done during pdf creation? -MikeT

You'd want embedded fonts with your PDFs so as to assure fidelity of your content.
If my local machine does not have the font used in the PDF what I view may be / can be something "off" from what you mastered.
Perhaps squares instead of language characters.
Distiller job options such as High Quality Print or Press Quality embed fonts (Standard does not).
For a PDF that does not have embedded fonts a Preflight Fixup can be used to embed fonts (even one for hidden text from Searchable Image or Searchable Image (Exact) OCR output).
Need Acrobat 9 Pro or Pro Extended.
The fonts must be on the local machine and "known" to the OS.
The fonts must have no license restriction(s) that preclude embedding.
Be well...

I Need to Embed Fonts in my PDF

Similar Messages

Maybe you are looking for