I need to enable the places feature on iPhoto, i need to enable the places feature on iPhoto

I am trying to use -faces on the Iphoto site.
but when i want to locate the picture, the message on the right hand side says -- places disabled.
How do i enable this icon to allow me to place my photo on a location
Regards
Desertfox52

The iPhoto forum has people there who are oriented in dealing with iPhoto problems. Your interests would be better served if you posted your query there.
Ciao.

Similar Messages

I updated to Firefox 4.0.1 this morning. Norton 5.5 is now disabled and the message states that it is incompatible with 4.0.1. I need the Norton features enabled. Can I go back to 4.0 until this is rersolved?

I updated to Firefox 4.0.1 this morning. Norton 5.5 is now disabled and the message states that it is incompatible with 4.0.1. I need the Norton features enabled. Can I go back to 4.0 until this is resolved?

Please do a Live Update to the Norton product.
They have provided an important update to Firefox 4.0.1.

I am looking for an app that can unmute my iphone after a preset time, eg 1 or 2 hours. Does anybody know an app with this feature?? The apps I have found are linked to a calendar or a place, I just need the timer function..

I am looking for an app that can unmute my iphone after a preset time, eg 1 or 2 hours. Does anybody know an app with this feature?? The apps I have found are linked to a calendar or a place, I just need the timer function..

thanks. yes i am aware of the VoiceOver feature but it is NOT the solution to my problem. as you said, it is a solution to a different set of issues. i want the text to speech ability because i there are books i need to read but do not have the time to sit down and read them and have become used to listening to them read to me either by a professional human reader or with the text to speech software on the Kindle.
I think Apple makes the best audio devices but i am really disappointed in this inexplainable shortcoming. if apple can give us siri they ought to be able to design a nice little button that i can push to turn on text to speech while i am in a document, book, magazine or webpage. clearly it is possible as apple has added the "reader" button in safari to have web pages dropped into the reader format.
thanks for your suggestion though, it is what everyone suggests but it does not address the issue.

The 3d features require 'use graphics processor' is enabled in the performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly

the 3d features require 'use graphics processor' is enabled in the performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly
Hello I'm also getting this error.. can anybody help me out? Here's my log.
Adobe Photoshop Version: 2014.0.0 20140508.r.58 2014/05/08:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2128 MHz
Built-in memory: 2934 MB
Free memory: 231 MB
Memory available to Photoshop: 2354 MB
Memory used by Photoshop: 70 %
3D Multitone Printing: Disabled.
Touch Gestures: Disabled.
Windows 2x UI: Disabled.
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
glgpu[0].GLVersion="2.1"
glgpu[0].GLMemoryMB=1242
glgpu[0].GLName="Intel(R) HD Graphics"
glgpu[0].GLVendor="Intel"
glgpu[0].GLVendorID=32902
glgpu[0].GLDriverVersion="8.15.10.2993"
glgpu[0].GLRectTextureSize=8192
glgpu[0].GLRenderer="Intel(R) HD Graphics"
glgpu[0].GLRendererID=70
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32"
glgpu[0].GLDriverDate="20130130000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.20 - Intel Build 8.15.10.2993"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447 ]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[512]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[1024]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[41]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
License Type: Tryout Version
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\ANNABE~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 298.0G, 63.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2014/04/14-23:42:44   79.554120   79.554120
   adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
   AdbePM.dll   PatchMatch 2014/04/23-10:46:55   79.554276   79.554276
   AdobeLinguistic.dll   Adobe Linguisitc Library   8.0.0
   AdobeOwl.dll   Adobe Owl 2014/03/05-14:49:37   5.0.33   79.552883
   AdobePDFL.dll   PDFL 2014/03/04-00:39:42   79.510482   79.510482
   AdobePIP.dll   Adobe Product Improvement Program   7.2.1.3399
   AdobeXMP.dll   Adobe XMP Core 2014/01/13-19:44:00   79.155772   79.155772
   AdobeXMPFiles.dll   Adobe XMP Files 2014/01/13-19:44:00   79.155772   79.155772
   AdobeXMPScript.dll   Adobe XMP Script 2014/01/13-19:44:00   79.155772   79.155772
   adobe_caps.dll   Adobe CAPS   8,0,0,7
   AGM.dll   AGM 2014/04/14-23:42:44   79.554120   79.554120
   ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31
   amtlib.dll   AMTLib (64 Bit)   8.0.0.45 BuildVersion: 8.0; BuildDate: Fri Mar 28 2014 20:28:30)   1.000000
   ARE.dll   ARE 2014/04/14-23:42:44   79.554120   79.554120
   AXE8SharedExpat.dll   AXE8SharedExpat 2013/12/20-21:40:29   79.551013   79.551013
   AXEDOMCore.dll   AXEDOMCore 2013/12/20-21:40:29   79.551013   79.551013
   Bib.dll   BIB 2014/04/14-23:42:44   79.554120   79.554120
   BIBUtils.dll   BIBUtils 2014/04/14-23:42:44   79.554120   79.554120
   boost_date_time.dll   photoshopdva   8.0.0
   boost_signals.dll   photoshopdva   8.0.0
   boost_system.dll   photoshopdva   8.0.0
   boost_threads.dll   photoshopdva   8.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.2.6.32411   2.2.6.32411
   CITThreading.dll   Adobe CITThreading   2.2.6.32411   2.2.6.32411
   CoolType.dll   CoolType 2014/04/14-23:42:44   79.554120   79.554120
   dvaaudiodevice.dll   photoshopdva   8.0.0
   dvacore.dll   photoshopdva   8.0.0
   dvamarshal.dll   photoshopdva   8.0.0
   dvamediatypes.dll   photoshopdva   8.0.0
   dvametadata.dll   photoshopdva   8.0.0
   dvametadataapi.dll   photoshopdva   8.0.0
   dvametadataui.dll   photoshopdva   8.0.0
   dvaplayer.dll   photoshopdva   8.0.0
   dvatransport.dll   photoshopdva   8.0.0
   dvaui.dll   photoshopdva   8.0.0
   dvaunittesting.dll   photoshopdva   8.0.0
   dynamiclink.dll   photoshopdva   8.0.0
   ExtendScript.dll   ExtendScript 2014/01/21-23:58:55   79.551519   79.551519
   icucnv40.dll   International Components for Unicode 2013/02/25-15:59:15    Build gtlib_4.0.19090
   icudt40.dll   International Components for Unicode 2013/02/25-15:59:15    Build gtlib_4.0.19090
   imslib.dll   IMSLib DLL   7.0.0.145
   JP2KLib.dll   JP2KLib 2014/03/12-08:53:44   79.252744   79.252744
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libiomp5md.dll   Intel(R) OpenMP* Runtime Library   5.0
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   LogSession.dll   LogSession   7.2.1.3399
   mediacoreif.dll   photoshopdva   8.0.0
   MPS.dll   MPS 2014/03/25-23:41:34   79.553444   79.553444
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CC 2014   15.0
   Plugin.dll   Adobe Photoshop CC 2014   15.0
   PlugPlugExternalObject.dll   Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit)   5.0.0
   PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   5.0.0.74
   PSArt.dll   Adobe Photoshop CC 2014   15.0
   PSViews.dll   Adobe Photoshop CC 2014   15.0
   SCCore.dll   ScCore 2014/01/21-23:58:55   79.551519   79.551519
   ScriptUIFlex.dll   ScriptUIFlex 2014/01/20-22:42:05   79.550992   79.550992
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 2, 2013, 1114
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 2, 2013, 1114
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   7.0.1.102
   VulcanControl.dll   Vulcan Application Control Library   5.0.0.82
   VulcanMessage5.dll   Vulcan Message Library   5.0.0.82
   WRServices.dll   WRServices Fri Mar 07 2014 15:33:10   Build 0.20204   0.20204
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 15.0 (2014.0.0 x001)
   Accented Edges 15.0
   Adaptive Wide Angle 15.0
   Angled Strokes 15.0
   Average 15.0 (2014.0.0 x001)
   Bas Relief 15.0
   BMP 15.0
   Camera Raw 8.0
   Camera Raw Filter 8.0
   Chalk & Charcoal 15.0
   Charcoal 15.0
   Chrome 15.0
   Cineon 15.0 (2014.0.0 x001)
   Clouds 15.0 (2014.0.0 x001)
   Collada 15.0 (2014.0.0 x001)
   Color Halftone 15.0
   Colored Pencil 15.0
   CompuServe GIF 15.0
   Conté Crayon 15.0
   Craquelure 15.0
   Crop and Straighten Photos 15.0 (2014.0.0 x001)
   Crop and Straighten Photos Filter 15.0
   Crosshatch 15.0
   Crystallize 15.0
   Cutout 15.0
   Dark Strokes 15.0
   De-Interlace 15.0
   Dicom 15.0
   Difference Clouds 15.0 (2014.0.0 x001)
   Diffuse Glow 15.0
   Displace 15.0
   Dry Brush 15.0
   Eazel Acquire 15.0 (2014.0.0 x001)
   Embed Watermark 4.0
   Entropy 15.0 (2014.0.0 x001)
   Export Color Lookup NO VERSION
   Extrude 15.0
   FastCore Routines 15.0 (2014.0.0 x001)
   Fibers 15.0
   Film Grain 15.0
   Filter Gallery 15.0
   Flash 3D 15.0 (2014.0.0 x001)
   Fresco 15.0
   Glass 15.0
   Glowing Edges 15.0
   Google Earth 4 15.0 (2014.0.0 x001)
   Grain 15.0
   Graphic Pen 15.0
   Halftone Pattern 15.0
   HDRMergeUI 15.0
   IFF Format 15.0
   Ink Outlines 15.0
   JPEG 2000 15.0
   Kurtosis 15.0 (2014.0.0 x001)
   Lens Blur 15.0
   Lens Correction 15.0
   Lens Flare 15.0
   Liquify 15.0
   Matlab Operation 15.0 (2014.0.0 x001)
   Maximum 15.0 (2014.0.0 x001)
   Mean 15.0 (2014.0.0 x001)
   Measurement Core 15.0 (2014.0.0 x001)
   Median 15.0 (2014.0.0 x001)
   Mezzotint 15.0
   Minimum 15.0 (2014.0.0 x001)
   MMXCore Routines 15.0 (2014.0.0 x001)
   Mosaic Tiles 15.0
   Multiprocessor Support 15.0 (2014.0.0 x001)
   Neon Glow 15.0
   Note Paper 15.0
   NTSC Colors 15.0 (2014.0.0 x001)
   Ocean Ripple 15.0
   OpenEXR 15.0
   Paint Daubs 15.0
   Palette Knife 15.0
   Patchwork 15.0
   Paths to Illustrator 15.0
   PCX 15.0 (2014.0.0 x001)
   Photocopy 15.0
   Photoshop 3D Engine 15.0 (2014.0.0 x001)
   Photoshop Touch 14.0
   Picture Package Filter 15.0 (2014.0.0 x001)
   Pinch 15.0
   Pixar 15.0 (2014.0.0 x001)
   Plaster 15.0
   Plastic Wrap 15.0
   PNG 15.0
   Pointillize 15.0
   Polar Coordinates 15.0
   Portable Bit Map 15.0 (2014.0.0 x001)
   Poster Edges 15.0
   Radial Blur 15.0
   Radiance 15.0 (2014.0.0 x001)
   Range 15.0 (2014.0.0 x001)
   Read Watermark 4.0
   Render Color Lookup Grid NO VERSION
   Reticulation 15.0
   Ripple 15.0
   Rough Pastels 15.0
   Save for Web 15.0
   ScriptingSupport 15.0
   Shake Reduction 15.0
   Shear 15.0
   Skewness 15.0 (2014.0.0 x001)
   Smart Blur 15.0
   Smudge Stick 15.0
   Solarize 15.0 (2014.0.0 x001)
   Spatter 15.0
   Spherize 15.0
   Sponge 15.0
   Sprayed Strokes 15.0
   Stained Glass 15.0
   Stamp 15.0
   Standard Deviation 15.0 (2014.0.0 x001)
   STL 15.0 (2014.0.0 x001)
   Sumi-e 15.0
   Summation 15.0 (2014.0.0 x001)
   Targa 15.0
   Texturizer 15.0
   Tiles 15.0
   Torn Edges 15.0
   Twirl 15.0
   Underpainting 15.0
   Vanishing Point 15.0
   Variance 15.0 (2014.0.0 x001)
   Water Paper 15.0
   Watercolor 15.0
   Wave 15.0
   Wavefront|OBJ 15.0 (2014.0.0 x001)
   WIA Support 15.0 (2014.0.0 x001)
   Wind 15.0
   Wireless Bitmap 15.0 (2014.0.0 x001)
   ZigZag 15.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Installed TWAIN devices: NONE

What Intel video card do you have? The only Intel HD graphics cards officially supported by Photoshop CC are:
Intel HD Graphics P3000
Intel HD Graphics P4000
Intel(R) HD Graphics P4600/P4700
Intel HD Graphics 5000
Go here to read more about the requirements: Photoshop CC and CC 2014 GPU FAQ

Why isn't "Find My iPad" automatically enabled on the device when purchased? Why is it a feature that is OFF and has to be turned ON instead of the other way around? I didn't know it needed to be enabled and now it's stolen and I can't locate it

Why isn't the "Find My iPad", "Find My Mac", etc. feature not automatically enabled in the iCloud Settings on every device? My iPad was stolen a couple days ago and it's been showing Offline under "Find My iPhone" feature so I started doing some research. Come to find out "Find My iPad" has to be enabled under the PRIVACY button in SETTINGS. I never knew that!!! That feature is highly needed for Apple products so can some explain why it's not already enabled on every device and actually has to be turned ON from the OFF position and not the other way around? Now some lucky person has stolen my iPad and I can't locate it because Apple wanted to give me the choice to enable it once it was already ******* stolen!

Simply stated that is design. If you want to suggest a change, there is a feedback section elsewhere on this site.
Barry

Firefox installed version 5. I cannot find the place to change privacy settings. I have searched the Help and it does not show how to edit mine. I have Vista. I urgently need to enable cookies. Help

I have searched under the Firefox dropdown box and cannot find tools or privacy settings.

Click the Firefox button, click Options, click Options, from there, everything is the same as before (click Privacy and be sure first item "Firefox will:" is set to "Use custom setting for history" to see all of the settings on that panel).
You can still use/see the Menu Bar (''File, Edit, View, History, Bookmarks, Tools, Help'') if you prefer it:
*'''Temporarily display the Menu Bar''': press the ALT key for the F10 key and make your selections from the temporarily displayed Menu Bar
*'''Toggle between the Menu Bar and Firefox button'''. Do one of the following:
**NOTE:
***Menu Bar '''checked''' = Menu Bar on, Firefox button off
***Menu Bar '''un-checked''' = Menu Bar off, Firefox button on
**keyboard shortcut: HOLD the ALT key while pressing the letters VTM on your keyboard
**Using the Menu Bar: click View > Toolbars, click Menu Bar
**Using the Firefox Button: click Firefox Button > Options, click Menu Bar
**right-click on an empty space in one of the toolbars, click Menu Bar
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Adobe PDF Plug-In For Firefox and Netscape
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

How to enable place a signaure feature

I have a PDF form and I want people who view the form and enter data to also be able to use the Place a Signature feature to sign the form. I created the form from a base PDF and made some minor edits to fields (date formatting, calculating a total). I added the extended PDF features. But when I open the form in reader, I still get the warning that says users can not add text or place a signature on the form because of the security settings. I am using Acrobat 9 Pro to create the form. Let me answer a few more questions based on what I have already read...
I do not want to use passwords in any way. I do not need to protect the form in any way.
I do not want to explore digitial signatures. If I can't get this to work, people will just print the form and sign with a pen.
I am sure I have the extended features becuase when I open the file again in Acrobat Pro 9 and try to add the extended features, I get a message that tells me this is already done.
I want to create a form that when opened in reader has the Place a Signature item enabled. Please provide precise step-by-step instructions.
Thanks.

I was just sent another PDF with a signature field. The creator showed me in Acrobat pro, he double clicks the signature field, and up comes a dialog box with a graphic of his signature. He clicks a button that places the graphic of his signature on the form. He then saves it to his local disk.
We need to be able to create a PDF in Pro that a user can open up on Reader and do this exact same thing. They need to open the document in Reader, click or double click the signature field, insert a graphic of their signature, and then save the form to local disk so it can be sent or printed.
I assume for this to work, the creator of the PDF has to do something to the form. And the person viewing the form in Reader has to do something to their ®eader setup to set up the signature. Can you provide these steps for me?
Thanks.

I have a "Contact" organization issue I need help with. I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am l

I have a "Contact" organization issue I need help with. I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am looking to be able to directly dial / email from this info in yet notes section located within a contact. On Blackberry, the notes area entered in a contact can connect directly but on the iPhone those numbers/emails are inactive. I am trying to avoid having to create each of these individuals as a separate contact and keep them under their account affiliation. It is easier to find them. This does not seem like that complicated of a request and hoping someone can tell me how or share an app that will enable the "notes" within a contact be "active". Hope this makes sense.

I seem to recall that this question has been asked before and I'm pretty sure that the answer is that you can't do what you want to do with the native contact app. However, there are lots of contact apps out there that pull from the built app's data but have other features. Perhaps one of them would meet your needs.

How to show "An app on your PC needs the following Windows feature." dialog programmatically?

When I try to run .NET 3.5 applications on Windows 8.1 which has not .NET 3.5 Framework, Windows will show the "An app on your PC needs the following Windows feature. .NET Framework 3.5 (includes .NET 2.0 and .NET 3.0)" dialog automatically.
But I want to show this dialog programmatically. I think that the dialog is much more friendly than DISM command.
Any help would be appreciated.

Hello lzhangwdk,
I'm thinking that the issue is more related to a Setup issue now.
Anyway, may I ask one question, have you include the .NET 3.5 feature in your prerequisite list when creating a installer?
To raise a dialog is possible but it still require you use a kind of depolyment technology then customize your installer. If you use the ClickOnce technology, you can consider use isFirstRun to customize something to run:
https://social.msdn.microsoft.com/forums/windows/en-us/b3bca1fb-d2f3-417d-a7f9-e174e32ed3b0/clickonce-custom-actions
In setup project you may consider use custom actions to raise a dialog.
http://www.codeproject.com/Articles/335516/Custom-Action-in-Visual-Studio-setup-projects
So in general I need more info from you to redirect you to the right direction. And actually in my mind, just use the prerequisite list is OK. It is better than try any dism command, it will ask your users to install or enable .NET 3.5 themself.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What files do I need to download iPhone photos to a thin client (HP)? Apple Mobile Support gives 4 dll files to enable the iPhone to be detected and charged but the thin client doesn't see the camera or hard drive.

The iTunes Installation files include 4 driver dlls that I can install on a Windows thin client to enable the iPhone to be charged.
The iPhone hard drive or photos are not detected. I guess I need scanner driver support to cope with the camera.
Can anyone tell me which files from the iTune installation set are needed.
It is not practical (or even possible?) to install the whole iTunes package.
I've seen this question asked by a lot of people but never seen an answer.
Please, can someone help...

Thanks for the reply.
A thin client is used to connect to a Terminal Server, or in my customer's case, a Citrix Server. I need the thin client to see the iPhone as a camera and pass it to the Citrix Client so the photos can THEN be either stored on a network storage device, or e-mailed.
Because the thin client doesn't even SEE a camera (i.e. the iPhone) it won't be able to connect to iCloud to do anything useful.
I think the question I should be asking, is how do I give the thin client Camera Support.
I've just seen a 2008 forum comment that said the iPhone DOESN'T handle photos through iTunes, but the PC (Scanner support) or MAC (iPhoto) handles them directly. I should be putting the question to HP.
This is still a good place for THIS question, because I've seen so many iPhone users asking it...
If I get a satisfactory answer I'll post it back here.

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
The below items appeared when I opened Photoshop CS 5:
“Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
(I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
If so, check Clipped and see if that makes a difference.
(Window>Clone Source)
As to the video card problem:
Which version of windows are you using?
What is the make and model of your graphics card?
Do you know which update windows installed?

Need help to trace the place where error occuring in Web UI of type System

Hi All,
Need help to trace the place where error occurring in Web UI of type System error,
this error coming while saving the corporate account creation,
error message description : - System error: Interruption in Routine READ TABLE GT_CHAR_VAL, CHAR_NAME = PVTLTD_CLEAN_SEGMENT
System error: Interruption in Routine READ TABLE GT_CHAR_VAL, CHAR_NAME = PVTLTD_CLEAN_CLASS-CP
thanking you.
Best Regards,
VijHyd

Hi Nagaraj,
See that the mandatory SICF setting are enabled or Active in the SICF Services. Follow the steps as below:-
Enter the TCode SICF
Execute the same for Hierarchy Type SICF.
Check the following SAP Note 1295006.
If every thing is Active then, the IC Agent role will open.
Still if it is not opening Let me know.
regards,
Sarangamath

Thank youbfor optimizing the touch input for scrolling on my HP Slate 500, why wont the others do the horizontal scrolling feature enables?

After testing all other available browsers the past month I have arrived at the conclusion that the Firefox browser is the only one that enables touch input for scrolling. Trying to navigate pages without this function using IE, Opera, Safari & Chrome is just tedious. I'm using the Slate as it was intended, business functions especially day to day charting for my patients in an online system.
The larger tabs for opening new searches & sites. If Microsoft plans on making W8 truly touch enabled they need to take note of what FF has done here. The touch input is limited on W7 but you've succeeded where others have failed.
3 cheers for FF! I couldn't do my job and document patient progress w/o your intuitive design. Brendan S. - Latham, NY
I guess the question is why are the others not developing these key features for Windows based slates...are they ignorant or is FF that much further ahead.

After testing all other available browsers the past month I have arrived at the conclusion that the Firefox browser is the only one that enables touch input for scrolling. Trying to navigate pages without this function using IE, Opera, Safari & Chrome is just tedious. I'm using the Slate as it was intended, business functions especially day to day charting for my patients in an online system.
The larger tabs for opening new searches & sites. If Microsoft plans on making W8 truly touch enabled they need to take note of what FF has done here. The touch input is limited on W7 but you've succeeded where others have failed.
3 cheers for FF! I couldn't do my job and document patient progress w/o your intuitive design. Brendan S. - Latham, NY
I guess the question is why are the others not developing these key features for Windows based slates...are they ignorant or is FF that much further ahead.

Hi. I have a website that uses Virtuemart and the 'add to cart' feature will not work in Firefox but will in IE. I am running XP and 'Accept all cookies' is enabled. HELP, PLEASE... Thankyou

I am testing our website :www.winningsportstips.com and we have Virtuemart installed and the site will not allow me to select 'add to cart' feature. However if I open the website in Internet Explorer, the feature is available and it functions correctly. I am running XP and have 'accept all cookies' enabled in settings.
Can you give me any clues? Thanks , Vern Nowland

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. 
http://forums.mozillazine.org/viewforum.php?f=25 
You'll need to register and login to be able to post in that forum.

I need to enable the places feature on iPhoto, i need to enable the places feature on iPhoto

Similar Messages

Maybe you are looking for