I need to find a driver

Hey, I have a Sound Blaster Li've! 5.,
I can't sem to find a driver for it,
Could someone please send me a link to the download page for the driver?

Hmm... new to CT site?
- http://uk.europe.creative.com/support/downloads/
- whole CD - http://badboy.filefront.com/ (!! Check the exact model number for your card (SB022x))
jutapa

Similar Messages

  • Need to find a driver for cRIO-9211 thermocouple to be used with LabView

    I am using the NI cRIO-9211 Thermocouple input and the NI USB-9162 Hi-Speed USB Carrier and need to find a driver to interface the thermocouple with LabView 8.5.1. Could you point me in the right direction as to where I can download a driver for this?

    Hi Durnan,
    You will require the DAQmx driver for the USB 9162. This can be found here: ni.com/downloads, see DAQmx 8.8 - would do.
    You only require the DAQmx driver, as the C Series modules are supported - they can just be used in a cRIO as well.
    Hope this helps,
    Kind Regards,
    James.  
    Kind Regards
    James Hillman
    Applications Engineer 2008 to 2009 National Instruments UK & Ireland
    Loughborough University UK - 2006 to 2011
    Remember Kudos those who help!

  • Need to find printer driver for OS 9.0.4 for Epson Stylus NX415

    Here's my problem:
    I have an old strawberry-colored original iMac, running OS 9.0.4.
    I also have an Epson Stylus NX415 all-in-one printer.
    But -- the iMac does not recognize the printer.
    In order for this printer to connect to this Mac, I need to have a "printer driver" extension that I can install (and then restart), so that the printer appears in the "Chooser" window, so I can select it there.
    I'd need either a printer driver specific to the NX415, or some kind of generic Epson printer driver compatible with this specific model.
    But here's the problem: I think the NX415 was first manufactured AFTER OSX was introduced, so it could be that Epson never even bothered to make a printer driver for OS 9 for the NX415.
    Help!
    I've scoured the Internet and legacy sites that specialize in old OS 9 software, and also scoured Epson's site, and could not find any appropriate printer drivers in any of those places.
    Any suggestions, or specific links to where I can download such a driver?
    Or is it the case that this printer simply physically will NEVER work with this model of Mac, and I should just give up?
    Any help would be greatly appreciated.

    Hello,
    A good guess would be that you are right in that an NX415 driver for Mac OS 9 was not made because of the fact that the printer is much newer than the operating system. It is probably going to be difficult to find a Mac OS 9 driver for another model that will allow any or all parts of the all-in-one printer in question to work properly. However, if you wish to carry out experiments, the Mac OS 8/9 drivers on the Epson support page for CX3200 may be as close as you can get.
    Perhaps someone else has a better idea.
    Jan

  • Need help finding a driver for my hp webcam . My computer say I dont have a camera but I do.

    Need help finding my camera[webcam] on my computor.

    Can you provide us with your computer model number?  Take a look in Device Manager to see if there is an Imaging Devices group that includes the webcam.  If not, is there an Unknown Device listed?  This would indicate that your webcam is detected, but there is no driver installed.  We can help you find the correct driver if that is the case.  Let's start with the computer model number.  Thanks.
    I am an HP employee. The opinions expressed are my own and not those of HP.

  • Need help finding a driver for our NI A/D board

    My A/D board has the following numbers: 70243 and 84-01 and 3199F. Help me find the driver

    All of the NI drivers can be located on the NI Drivers and Updates page. In order to find the required driver, you will need to know what the device is called. You can find this information in several different ways. One way is to visually inspect the device. If it is an NI device then it should list the device name somewhere on the board. Also, you could locate the part number. This number usually ends in -01 or -02 and is printed near a bar code. If you can find this number, then simply type it into the search on ni.com to locate the name of the device.
    When the name of the device is figured out, you should then determine the appropriate driver for the device from the Drivers and Update page linked above.
    If it is not an NI device, then you will want to view the device manufacturer's webpage for available drivers.
    Please do not post back to this message as I do not believe the message pertains to the NI Measure software. The question is more related to a specific piece of hardware. Thus, you should repost this question, if another exists, to the appropriate NI Hardware category.
    Best of luck.
    Jared A

  • Need to find Wireless Driver for G60-630CA

    I just downgraded this laptop to XP and I'm missing the network controller which I guess is the wireless driver.  No luck finding it any where.  Can somebody help?
    This question was solved.
    View Solution.

    Atheros Wireless LAN Driver for Microsoft Windows XP
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-785...
    Type: Driver Version: 3.00 (3 Dec 2009)
    Operating System(s): Microsoft Windows XP
    File name: sp46630.exe (21 MB)
    DEVICES SUPPORTED:
    Atheros AR9285 802.11b/g/n WiFi Adapter
    Atheros AR5009 802.11a/g/n WiFi Adapter
    Atheros AR5006 802.11a/b/g WiFi Adapter
    Atheros AR5007 802.11b/g WiFi Adapter
    DriverVer = 09/30/2009,7.7.0.406
    [Atheros]
    %ATHER.DeviceDesc.30A1% = ATHER_DEV_30A1.ndi, PCI\VEN_168C&DEV_002B&SUBSYS_303F103C
    %ATHER.DeviceDesc.30A1% = ATHER_DEV_30A1.ndi, PCI\VEN_168C&DEV_002B&SUBSYS_3040103C
    %ATHER.DeviceDesc.30AB% = ATHER_DEV_30AB.ndi, PCI\VEN_168C&DEV_002B&SUBSYS_1461103C
    [Strings]
    ATHER.DeviceDesc.30A1 = "Atheros AR9285 802.11b/g/n WiFi Adapter"
    ATHER.DeviceDesc.30AB = "Atheros AR9285 802.11b/g/n WiFi Adapter"

  • I need to find a driver w/VI's that makes my PCI-6014

    Can you send me a driver that will allow my PCI-6014 work with labview student 7.0?
    Thanks
    Greg

    Greg,
    The driver for our DAQ devices, NI-DAQ, is the same regardless of what version of LabVIEW you are using. You can download it free from this site:
    http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C128D?opendocument&node=132060_US
    NI-DAQ 7.3.1 is the most recent version.
    -Alan A.

  • I need help finding the driver for my ethernet.it is a compaq presario sr1403wm with windows xp.

    compaq presario sr1403wm
    windows xp
    my computer dropped the driver for the ethernet card and am unable to do a system restore.

    HP Spring 2005 Original Network Adapter Driver Collection
    or
    SiS900 LAN Driver v1.19
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • My HP LaserJet 4L lost its driver during an upgrade in Windows 7. How can I find the driver?

    My operating system is Windows Utimate 32 bit and I have a HP LaserJet 4l printer that I found a driver for when I got Windows 7 and it worked.  Now the printer won't work and I need to find the driver again.  Can anyone help me?

    Windows 7 driver for your printer:
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome?sp4ts.oid=15036&ac.admit...
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • PPC G5 Drivers PCI Cards need to delete the Driver

    Hi
    Does anyone know where the Drivers are located in a PPC G5 for the PCI Cards
    I have one that is coming up called:
    bcom5714 (card name Apple 5714) which is not installed but it says the driver is installed.
    its in slot GIGE
    Bus: PCI
    Driver Installed: YES
    Type: NETWORK
    CARD: Apple 5714
    Just need to find this driver - AND DELETE IT
    Thanks if you know where I can find the file

    Hi BDAqua
    You Back !! - Hi
    Thanks for looking at this one
    I have this message in Console - and for some reason the G5 Quad does not want to sleep
    This message comes up stopping it from going to sleep
    What the story ?
    Thanks BDAqua in advance
    kk69

  • Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

    need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

    Try with the latest Apple driver package for Canon (released 15th Feb):
    http://support.apple.com/kb/DL899
    This solved my problem with the printing.

  • I'm being told my start up disc is full on my 2010 macbook. Memory is 2GB 1067 MHz; and Finder tells me I have 1.05 GB still available.  Do I need a bigger hard drive?

    I'm getting error message that my start up disc is full on my 2010 macbook.  Started with 2GB 1067 MHz; and, according to Finder, still have 1.05 GB available.  Any idea what's up?  I had MacKeeper dump all junk files.  Do I need a new hard drive?

    First of all I would suggest you get rid of MacKeeper, which is well known in the Mac community to be useless or in some cases to be as bad as malware. Read this user tip by Klaus1.
    The startup disk (your hard drive) is not the same as the system memory (the 2GB of RAM you describe.) You may very well need a larger hard drive, but the first thing I would try would be looking through your downloads folder for old installer disk images, deleting any that you do not need any more (usually all of them) and emptying your trash. Many users put files in their trash and forget to empty it.
    If that doesn't gain you sufficient space, you may want to replace your hard drive with a larger model. You don't mention what size drive you have, but it is possible to do it yourself. See page 37 of this user manual.
    Another option would be to put files that are taking up a large amount of space (often iTunes and iPhoto Libraries fall into this category) on an external hard drive. This works best if you do not need portability.
    Best of luck.

  • I need help finding this hp hard drive for dv6521eo

    I need help finding this hp hard drive and memory  for dv6521eo

    Hi:
    You can purchase any SATA II 2.5" notebook hard drive up to 500 GB in size.
    Memory is PC2-6400.
    Paul

  • I have mac os 10.7.4 update for hp photosmart c4100 series printer (printer needs a driver), where do I find a driver?

    I have mac os 10.7.4 update for hp photosmart c4100 series printer (printer needs a driver), where do I find a driver?

    The last driver that Canon released for the iP6600D was v10.51 for OS X 10.7. You could try downloading and installing this driver via this link.
    Note that the driver may not be digitally signed so Gatekeeper will block its installation. To get past Gatekeeper, you can right-click on the installer and select Open from the pop-up menu that appears. You will then be given the option to install the driver.

  • Need help finding Driver type in the registry

    Hi,
    given a DSN(Data Source Name), I need to find the type of Driver it was assigned to in the Registry. pls help me to do this in java.
    Thanks in advance,
    Rao

    Hi jschell,
    Thanks for your response.
    I would like to explain my actual problem clearly now.
    I am working on an enterprise product where it has a setup screen in which it has a form with DSN and Database Type as the input fields. The database type could be either Oracle or MS SQLServer or MS Access.
    so, instead of entering both (DSN and Database Type) into the form, I would like to enter only DSN in the form, and based on this DSN, I should know what is the corresponding Database Type.
    Pls let me know how to do this without manually referring in the system.
    thanks for ur help and time.
    Rao

Maybe you are looking for

  • Different material group for two CO companies with same material no.

    Hi all We are implementing another CO company in COPA. The issue is  that both companies use the same materials number, but in COPA grouping categories (MATKL) must be different . I was thinking in using another category, but is there another option?

  • ERROR: The new SAP tools in /usr/sap/DEV/EHPI/abap/exe cannot connect

    Hi All. I am attempting to upgrade my ECC 6.0 EPH3 system to EPH4.(System 'i' V6R1M1) I am hitting an error  on phase PREP_INIT/CHECKPROF_INI which states 'ERROR: The new SAP tools in /usr/sap/DEV/EHPI/abap/exe cannot connect to your database.' The l

  • Conditional build tags and numbered lists

    Is there a way to get numbered lists to automatically update when conditional tags are used? For example, only step 6 of a 10 step list is needed for 1 of 4 products. However, when I preview the content for the 3 of 4 products that do not require tha

  • How to do query Optimization ,plz share any documents with real examples

    Hi All, could any one please provide me some informations, how can i do query optimization in oracle using Third party tool sql developer . i am working oracle 10g version,please share with me if any documents or ppt like that. Thanks Krupa

  • Photo organization in Finder

    Hello all. At some random point iphoto stoped sorting my files by date and started sorting them by roll number. It used to sort it by year - month - day. Now there is just roll numbers. Does anyone know how to change this setting?