I need to find out my passcode to turn off restrictions on my iphone

hey, I got a new phone sent out to me after my old phone couldn't be repaired and now I can't get into restrictions on my phone because I don't know the passcode
how can I find out what it is on this new phone ?
cheers, Matt.

Feature is not available and the only way is to restore your phone.
You can request it https://www.apple.com/feedback/iphone.html

Similar Messages

I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

My restrictions are on and I didn't turn them on. The code is not the one I use to unlock my ipad. How can I find out the code to turn off my restrictions and why did it turn on?

My restrictions are turned on. I didn't turn them on. The only code I've used on my ipad is to unlock it and that code won't work on my restrictions. How do I turn off restrictions and prevent them being turned on again?

The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

I need to find out how to re-set icloud id on my iphone. I already had an apple id which is a family id. I used it as my id when setting up my new company phone. I have new apple id but can't change icloud phone. Still recognizes old id.

I have a new company iphone. When setting it up I used a current "family" apple id I created for the children's itouch's. I realized after the fact that all of their contact/content dat is syncing to my business phone. I created a new apple id for the phone,logged out of the old id and in with the new on my phone. However, it will not allow me to make this same change for icloud on the phone. The icloud is still associated to the old id. How can I change my phone icloud to sync with my new apple id and stop getting the kids content?

In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically. Can some one out there help me?

I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically.

Update automatically under which circumstances, exactly?

Need to find out how to lock a point in a path that will not allow the rest of the path to rotate or move around it

Hello,
I am having some trouble with using shape layers and paths to create a solid, flat 'hair' effect in a cartoon animation.
I have used a semicircle shape layer as the hair on the head itself and then a path with a stroke of the same width as the semi circle to be the long part of the hair.
Unfortunately when I move/rotate the bottom point in the path it causes gaps to appear further up where the stroke is rotating around the point at which the stroke is supposed to "connect" to the semi circle.
I have included a couple of screenshots of me rotating the hair opposite ways so you can see.
- imgur: the simple image sharer
- imgur: the simple image sharer
I need to find out if there is a way to lock the top point in place where it joins the semi circle blond hair which will stop this part from moving at all, even rotating around the point.
But the bottom needs to move freely and obviously the part between the two points will move fairly naturally.
If you can imagine how a girl with long hair has her hair attached to her head, it does not move at all, but the bottom moves freely. It needs to be like this.
If you can provide any assistance it would be greatly appreciated.
Thanks!

That is perfect thank you so much!
Can't believe I didn't think of that but you da real MVP!

TS1646 We have several apple devices in our family who use my debit card for itune charges. I need to find out which device (itune account) these charges are coming from. Can you help?

We have several apple devices in our family who use my debit card for itune charges. I need to find out which device (itune account) these charges are coming from. Can you help?

You can't tell which device a purhcase was made on, but if your family members each have their own iTunes account to which your card is linked then you can check the purchase history on each of those accounts via the Store > View Account menu option on your computer's iTunes - that should have 'purchase history' section with a 'see all' link to the right of it

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues). And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

Thanks, I appreciate the help. I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

I need to find out the list of outbound made it to the vendor

I need to find out if the attached list of outbound made it to the vendor.
and i have list of all IDOC numbers that i need to check. Could you please assist? how to check?
Please do needful.
Thanks in advance.
Regards,
PIneeder.

Hi,
If you want to check it in XI/PI check first:
- in the abap stack transaction:
              - sxmb_moni and filter for your sending system and idoc type
                     or
              - idx5 fill in the date when the idoc was sent and the idoc number from the sending system and through double-clicking you will get to the same message as in sxmb_moni
- in the runtime workbench (only if the communication with the partner is done via a java based adapter (all except xi,http and idoc) go to the runtime workbench and then click on message monitoring and filter for your messages. If the status there is succesfull then you can safely assume that the message was delivered to the partner. Note: it sometimes happens that a PI server also has one or more decentral adapter engines. In this case you need to check if your communication channel is deployed on any of them (you can check that in the Integration Builder) and then select the corresponding one in the Runtime workbench -> Message Monitoring -> Message from Component.
Hope this helps,
Horia

I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send scree

I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send screen shots of all of the drive location where the drive is still good and I can see my Adobe Acrobat pro information, but the download itself is missing. NEXT STEP?

If you are talking about Reader (you did post in the Reader forum), then just download http://get.adobe.com/reader/enterprise. However Reader is free not purchasable. You can download a trial then install using your serial number, which if you didn’t register or write down somewhere you will be out of luck to track down.
Download a free trial or buy Adobe products | Adobe downloads

My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed

My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed

The cost is $149 for all the phones except the iphone 4S that one is $199. Apple does not cover any acidental damage

HT4113 hello, I have an Iphone 4 and im trying to "erase all content and settings" but it asks for a passcode that i have no idea what is. its none of my previous passcodes ive ever had. What should i do to find out that passcode?

Hello im trying to "erase all content and settings" on my iphone 4, but it keeps asking for a 4 digit passcode and i have no idea what that passcode is. It's none of my previous passwords I've had on the phone since i've used it. How do i find out that Passcode?

Are you sure it's asking for a four digit code?
iOS 7 has a new feature called Activation Lock. It requires your Apple ID and password before doing something like an iPhone reset. This is a new anti-theft feature.

Need help with getting images to look smooth (without the bitmap squares) around the edges. When I transfer the image from pictures, it sets itself into the InDesign layout, but with square edges. I need to find out how to get it to look smooth?

Need to find out how to get my images transferred into an InDesign layout without the rough edges, as with a bit map image, but to appear with smooth edges in the layout. I can notice it more when I enlarge the file (pic). How can I get it to appear smooth in the finished layout. Another thing too that I noticed; it seems to have effected the other photos in the layout. They seem to be
pixelated too after I import the illustration (hand drawn artwork...)? Any assistance with this issue will be greatly appreciated. Thanks in advance.

No Clipboard, no copy & paste, as you would not get the full information of the image.
When you paste you can't get the image info from the Links panel, but you can get resolution and color info either via the Preflight panel or by exporting to PDF and checking the image in Acrobat.
Here I've pasted a 300ppi image, scaled it, and made a Preflight rule that catches any image under 1200ppi. The panel gives me the effective resolution of the pasted image as 556ppi. There are other workflow reasons not to paste—you loose the ability to easily edit the original and large file sizes—but pasting wouldn't cause a loss in effective resolution or change in color mode.

Need to find out how many users are using Siebel Application

Hello all,
I need to find out how many users are using Siebel Application?
Is there a way I can find out?
Thanks.
yasun

Hi,
Read the following:
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor30.html
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor17.html
For full information about server status and statistics red:
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor.html
T.Abed

Need to find out how much % of query completed from OEM

Need to find out how long will a query take to run or when I am running the query where can I check to see that X% of my query is complete.
Is that % shown on OEM --> Performance --> Top Activitity?

Under OEM/GC of release 10g you won't be able to see how long the query will take neither how much % of a query are already finished.
I know that this functionality was given in the old release of the OEM (javas based GUI with ll the databases on the left side). I'm missing
that old functionality, too...

I need to find out my passcode to turn off restrictions on my iphone

Similar Messages

Maybe you are looking for