I need to find out the list of outbound made it to the vendor

I need to find out if the attached list of outbound made it to the vendor.
and i have list of all IDOC numbers that i need to check. Could you please assist? how to check?
Please do needful.
Thanks in advance.
Regards,
PIneeder.

Hi,
If you want to check it in XI/PI check first:
- in the abap stack transaction:
              - sxmb_moni and filter for your sending system and idoc type
                     or
              - idx5 fill in the date when the idoc was sent and the idoc number from the sending system and through double-clicking you will get to the same message as in sxmb_moni
- in the runtime workbench (only if the communication with the partner is done via a java based adapter (all except xi,http and idoc) go to the runtime workbench and then click on message monitoring and filter for your messages. If the status there is succesfull then you can safely assume that the message was delivered to the partner. Note: it sometimes happens that a PI server also has one or more decentral adapter engines. In this case you need to check if your communication channel is deployed on any of them (you can check that in the Integration Builder) and then select the corresponding one in the Runtime workbench -> Message Monitoring -> Message from Component.
Hope this helps,
Horia

Similar Messages

I need help finding out how to make my phone reappear on the itunes list

for some reason i can not find my phone on the left side of the page to drop songs into and sync it up to my phone PLEASE help me!!!!

iOS: Device not recognized in iTunes for Windows

Need to find out how to lock a point in a path that will not allow the rest of the path to rotate or move around it

Hello,
I am having some trouble with using shape layers and paths to create a solid, flat 'hair' effect in a cartoon animation.
I have used a semicircle shape layer as the hair on the head itself and then a path with a stroke of the same width as the semi circle to be the long part of the hair.
Unfortunately when I move/rotate the bottom point in the path it causes gaps to appear further up where the stroke is rotating around the point at which the stroke is supposed to "connect" to the semi circle.
I have included a couple of screenshots of me rotating the hair opposite ways so you can see.
- imgur: the simple image sharer
- imgur: the simple image sharer
I need to find out if there is a way to lock the top point in place where it joins the semi circle blond hair which will stop this part from moving at all, even rotating around the point.
But the bottom needs to move freely and obviously the part between the two points will move fairly naturally.
If you can imagine how a girl with long hair has her hair attached to her head, it does not move at all, but the bottom moves freely. It needs to be like this.
If you can provide any assistance it would be greatly appreciated.
Thanks!

That is perfect thank you so much!
Can't believe I didn't think of that but you da real MVP!

Need to find out the queries which did not executed in 2014

Hi All,
I need to find out the queries which start from YY and did not executed in 2014, earlier we used to find out by looking into the technical content cube 0TCT_C02 but now its giving dump as number of queries increases. I tried to find out using table RSZCOMPDIR but not able to trace it exactly. Please suggest some alternative solution to find out the queries which did not execute in 2014 so that we can delete it.
Thanks,
Asim.

Hi,
RSDDSTAT_OLAP : This is the table which contains query execution details
CALDAY field in that table gives you query execution date
OBJNAM gives the query name
As you said RSZCOMPDIR gives list of all queries. doing a lookup between these tables will identify the queris which are not executed in particular period.
-Sriram

I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?

I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?

I think there are third-party programs which will do that, but you can also do it with Automator:
See the links in my post, here: https://discussions.apple.com/message/22390873#22390873
The file or clipboard contents will be in Tab Separated vars, so you'll have to open with a spreadsheet program and save as Comma Separated Vars format.

My iMac holds my main iTunes account. How do I find out a list of all the devices that are authorized from this computer?

My iMac holds my main iTunes account and it shows 4 devices are authorized to play iTunes. I can only name 3. How do I find out a list of all the devices that are authorized from this computer?

I don't believe this is possible, but you can deauthorize all your computers and start over if you are concerned.
See here
Best of luck

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues). And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

Thanks, I appreciate the help. I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send scree

I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send screen shots of all of the drive location where the drive is still good and I can see my Adobe Acrobat pro information, but the download itself is missing. NEXT STEP?

If you are talking about Reader (you did post in the Reader forum), then just download http://get.adobe.com/reader/enterprise. However Reader is free not purchasable. You can download a trial then install using your serial number, which if you didn’t register or write down somewhere you will be out of luck to track down.
Download a free trial or buy Adobe products | Adobe downloads

Need help with getting images to look smooth (without the bitmap squares) around the edges. When I transfer the image from pictures, it sets itself into the InDesign layout, but with square edges. I need to find out how to get it to look smooth?

Need to find out how to get my images transferred into an InDesign layout without the rough edges, as with a bit map image, but to appear with smooth edges in the layout. I can notice it more when I enlarge the file (pic). How can I get it to appear smooth in the finished layout. Another thing too that I noticed; it seems to have effected the other photos in the layout. They seem to be
pixelated too after I import the illustration (hand drawn artwork...)? Any assistance with this issue will be greatly appreciated. Thanks in advance.

No Clipboard, no copy & paste, as you would not get the full information of the image.
When you paste you can't get the image info from the Links panel, but you can get resolution and color info either via the Preflight panel or by exporting to PDF and checking the image in Acrobat.
Here I've pasted a 300ppi image, scaled it, and made a Preflight rule that catches any image under 1200ppi. The panel gives me the effective resolution of the pasted image as 556ppi. There are other workflow reasons not to paste—you loose the ability to easily edit the original and large file sizes—but pasting wouldn't cause a loss in effective resolution or change in color mode.

I need to find out how much wifi data my apps are using. I have a very limited amount of wifi data, and I am exceeding my monthly allowance. Apparently, even apps I think are not open are sending/receiving data through the wifi and using up my allowance.

I need to find out how much wifi data my apps are using. I am on a very limited amount of WiFi data each month, which I am regularly exceeding. I have been told to work out which of my apps is using the data. Also, I think I have closed an app by double clicking the home button, then swiping the app up - is this the way to close it, or will it still be sending/receiving data?

Go into your Settings : General : and turn off background refresh for your apps. In Settings : Mail turn Fetch new data to OFF and Load Remote Images to OFF. This will mean that Mail will only check for messages when you actually use it, and all your advertising junk mail won't have all the images in it.
Turn off push notifications every chance you get.
Make sure you are actually quitting apps: to quit apps press the Home button twice and you should see a bunch of smaller screen images for every open app. To quit the app swipe from the screen image (not the icon) upward off the top of the iPad. You can swipe left and right to see more open apps, but there must be no left-right movement on the screen when you swipe upward to close the app.
Turn off your internet connection when you do not need it. The easiest way to do this is to swipe up from the bottom of you screen to get the control centre, and then touch the airplane to turn on airplane mode. You can repeat this sequence to turn it back on again when you need it. Most especially turn airplane mode on whenever you are sleeping your iPad for long periods. This will save battery life too. OR actually turn your iPad off - which means holding the power key down for several seconds until the red swipe bar appears, and then swipe to turn it off. If you go this route, note that it will take longer to turn on then it takes to wake from sleep.

I have two copies of CS6 and I need to find out which serial number is installed on which computer. How do I find the serial number once it's installed on a computer?

I have two copies of CS6 and I need to find out which serial number is installed on which computer. How do I find the serial number once it's installed on a computer?

if they're pcs, Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…

I need to find out how to transfer all the music from my old IPOD to my new IPOD. Not all of my music was purchased on ITUNES.

I need to find out how to transfer all my music from my original IPOD nano to my new IPOD nano. I want to keep both and not all of my music was purchased on ITUNES. Please help!

Your music should be in your iTunes library, that is how it gets synced to the iPod. If that music is not present in the iTunes library, you will need to get a 3rd party software for the computer to get the music off the original iPod and then move it to the iTunes library to be able to sync it to the new iPod. You can see some additional information in this tip supplied by a fellow user. Syncing to a "New" Computer or replacing a "crashed" Hard Drive

I need to find out what my key code is to connect another pc to my airport, I am running snow leopard. I need the hexidecimal code, 12 characters. How can I find it?

anybody have a suggestion? I need to find out what my key code is to connect another pc to my airport, I am running snow leopard. I need the hexidecimal code, 12 characters. How can I find it?

You can get the Equivalent Network Password from the menu options of the AirPort Utility as follows:
Start the AirPort Utility; select the AirPort, and then, select Manual Setup.
From the Utility's menu bar, select Base Station, and then, Equivalent Network Password to reveal the hexidecimal key code.

10 laksh records and need to find out the top5 salary

Hi,
I have emp table with 10 laksh records and need to find out the top5 salary.I formed the below mentioned query,
SELECT ROWNUM,SAL,EMPNO,ENAME,DEPTNO FROM(SELECT ENAME,EMPNO,
DEPTNO,SAL FROM EMP ORDER BY SAL DESC) WHERE ROWNUM<=3 AND SAL IS NOT NULL;
i would like tune this query or anyother new qeury find out top5 salary.
By
Siva

kn_sivaraman wrote:
Hi,
I have emp table with 10 laksh records and need to find out the top5 salary.I formed the below mentioned query,
SELECT ROWNUM,SAL,EMPNO,ENAME,DEPTNO FROM(SELECT ENAME,EMPNO,
DEPTNO,SAL FROM EMP ORDER BY SAL DESC) WHERE ROWNUM<=3 AND SAL IS NOT NULL;
i would like tune this query or anyother new qeury find out top5 salary.
By
SivaWhy do you need to Tune? What do you need to tune?
What is the execution time of the query? What is the explain plan?
Moreover, in an International forum, refrain from using Locals. 10 Lakhs = 1 Million.
Do provide the above details to determine if your query needs tuning?
Below is a correct version of Top N query. Untested for your example. Please do modify according to your needs.
SELECT ROWNUM,
SAL,
EMPNO,
ENAME,
DEPTNO
FROM
(SELECT ENAME,EMPNO, DEPTNO,SAL, dense_rank() over(order by sal desc nulls last) dr
FROM EMP ORDER BY SAL DESC
) a
WHERE a.dr <= 5;Regards,
P.

I need to find out dollar amount on iTunes "Give any amount" gift cards I purchased, store clerk did not write down the amounts

I need to find out dollar amount on iTunes "Give any amount" gift cards I purchased at CVS, store clerk did not write down the amounts when I purchased.

Without scratching them off to get the numbers and redeeming them there is no way for you to do so. You could go back to CVS and see if they can get the data from their computer or see if your receipt helps.

I need to find out the list of outbound made it to the vendor

Similar Messages

Maybe you are looking for