I need to forward two ports for a DVR HOW DO I DO THAT?

I need to forward port 80 and port 6036 to a security camera DVR and I just cant find the way to do it

Please check out the following AirPort User Tip for details on configuring port mapping on AirPort routers.

Similar Messages

I need to open specific ports in the firewall - how do you do that?

Hi There,
I'm trying to setup a web development server on a spare mac mini but I can't figure out how to open ports for the MySQL server under Snow Leopard.
Is there a way to do this? I've set the firewall to allow MAMP to open ports whenever it needs to but when I do a port scan of the Mac mini the MySQL port doesn't show up - SSH, HTTP and VNC do however.
I'm happy to configure it via the Terminal but I can't find any info on how to do this in Snow Leopard as I think it's different from Leopard (based on what I've found online).
e.g.
$ ipfw show
Gives me an error:
"ipfw: socket: Operation not permitted"
Any help would be much appreciated
Cheers
Ben

After digging around it looks like Snow Leopard doesn't use ipfw for opening ports.
Does anyone know how to open ports in Snow Leopard? Apple don't seem to have any info on this - besides the allow incoming connections for certain applications.
Will try WaterRoof and see what happens.
Cheers
Ben
Message was edited by: Ben Sciascia

HT4314 I need to report an app for age rating, how do I do that?

I put an age restriction on my sons phone and I came across an app that says its for 12 and over but you can look up nudity and ****. This app needs to be re-rated and I feel like the apple store needs to pay better attention to this or figure out a way we can control the iPhones a little better.

I always thought per apple's agreements there was to be no nudity or **** type material on the app store. I really hope that someone can help verify this information. I had an old app I redownloaded and it all appeard to be the same until I opened the app, I was horrified to see nothing but young girls not only topless but many nude. I have been contacting anyone possible to get this app shut down. There is no guarentee that these young girls even know their pictures are on the iphone for everyone to see.

Do we need two ports for establishing one connection to EJB from swing clie

Hi all,
I have an application which uses Java Swing client and accesses an EJB to connect to the server.
I am connecting to the EJB using iiop://server-ipaddress:port.
It is required for me to open the firewall to access the above specified ip address and port number. Even though, I am able to access the specific ip address and port number, I am not able to establish the connection.
I tried out to check the porblem and I came to know that, this aplication is trying to open another port also on the same IP address.
I am just wondering whether we need two ports for one connection.
Does anybody face this type of problem?

If you need to access on two ports, you would have to open both :)

Do we need to create two zones for Two HBA for a host connected with SAN ?

Hi,While creating Zone , Do we need to create two zones for Two HBA for a host connected with SAN ? Or a zone is enough for
a host which having Two HBAs...We have two 9124s for our SAN fabric...
As I found like one zone below, I little bit confused that , if a host having two HBA connected with SAN, should I expect two zones for every Host?
from the zone set, I gave the command show zoneset
zone name SQLSVR-X-NNN_CX4 vsan 1
    pwwn 50:06:NN:NN:NN:NN:NN:NN
    pwwn 50:06:NN:NN:NN:NN:NN:NN
          pwwn 10:00:NN:NN:NN:NN:NN:NN
But I found only one zone for the server's HBA2:by the same time in the fabric I found switches A & B showing the WWNs of those HBAs on its
connected N port...Its not only for this server alone, but for all hosts..Can you help me to clarify on this please..that should we need to create one zone for
one HBA?

if u have two independent fabrics between hosts and storage, i think the below confs are recommended.
Scenario 1: 2 HBAs single port each ( redundancy across HBA / Storage port )
HBA1 - port 0 ---------> Fabric A ----------> Storage port ( FAx/CLx )
HBA2 - port 0 ---------> Fabirc B ----------> Storage port ( FAy/CLy )
Scenario 2: 2 HBAs of dual port each
HBA1 - port 0 -------> Fabric A ---------> Storage port ( FAx/CLx )
HBA2 - port0 ---------> Fabric A ---------> Storage port ( FAs/CLs )
HBA1 - port 1 --------> Fabric A --------> Storage port ( FAy/CLy )
HBA2 - port 1 ---------> Fabric B --------> Storage port ( FAt/CLt )
the zone which is in your output is VSAN 1. if its a production VSAN, Cisco doesn't recomends to use VSAN 1 ( default vsan ) for production.

How do I forward a port on my Airport Extreme? I have a Belkin @TV (it's like a sling box), and to watch it over cellular on my iPhone I need to forward the port 49177 in the router settings.

How do I forward a port on my Airport Extreme? I have a Belkin @TV (it's like a sling box), and to watch it over cellular on my iPhone I need to forward the port 49177 in the router settings. A simple set of instructions would be greatly appreciated.

How to Port Forward on AEBS

How to forward/open ports for WRT54G?

Hi. I recently bought a WRT54G because my old router was destroyed by lightening and thunder. I have managed to set it up, and got the interent itself to work with static IP adress (192.168.1.101 for my PC).
However, even though I have tried to forward/open ports for applications like uTorrent and DC++ as well as Limewire, I have no luck. When I test if the ports are indeed opened, I get the result that they are not. Here are how my port forward setting looks like for utorrent. The port in the settings image is of course the same as in uTorrent.
http://www.pictub.com/quickupload/01/untitled-1mb4wd.jpg
I can't seem to open any ports, even though I have followed tutorials like the ones at portforward.com. I have the latest firmware for my router, as I flashed it when I got it. Help .

Yes, I did .
Anyways, look what I found in the uTorrent FAQ:
1.7 Special note for users with Linksys WRT54G/GL/GS routers, there are severe problems with them when running any P2P application
To fix it, they say one has to flash with a unofficial firmware, but I will rather get the money back and buy another router tomorrow. Thanks for the help anyways .

HT1386 When I go to do an update for my apps on my iPhone 4S it says that I am connected to the Chinese iTunes Store and tha I need to switch to the US store. How do you do that?

When I go to do an update for my apps on my iPhone 4S it says that I am connected to the Chinese iTunes Store and tha I need to switch to the US store. How do you do that?

Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region...change here.

I need to turn off my voicemail just for tonight. How do I do that?

I need to turn off my voicemail just for tonight. How do I do that?

Voice mail is controlled by your carrier. Call them.

HT5622 If I have two emails for my iMessage how can I see or receive my msj or the email that is not the primary email

If I have two emails for my iMessage how can I see or receive my msj or the email that is not the primary email

It's basically ment for iMessage and FaceTime. I might be wrong but this can only be done between two Apple products that allow this function. You won't receive an email if I sent you an iMessage to a secondary email you use for iMessages. You would only receive a text message. Now if someone using a PC sent an email to the secondary email you use you will receive an email not a text message. The secondary email is used basically if you do not have a data plan and you're connected to wifi you can still send iMessages using those emails you provided.

I have built a slideshow in iPhoto -- I need/want the file in .mp4 format. How do I do that?

Ok, I don't know why I am here, but!
I have built a slideshow in iPhoto -- I need/want the file in .mp4 format. How do I do that?
The question may have been answered somewhere but I was sent here -- so her I am.
Still I think I need my slideshow in .MP4 format to play on windows/smartTVs and the .m4v file that export offers seems to be the only option and it fails.
I am using iPhoto v9.5.1 on a Macbook Air.
help.

Try changing the extension to .m4v and see if that will do the trick. It did for me on another occasion where it wouldn't play as .MP4. If it works it's a simple solution.
I compared an .m4v and an .MP4 file in Qujicktime Player via the Winde ➙ Show Movie Inspector menu and both were the same codec:
H.264, 1280 × 720, Millions
AAC, Stereo (L R), 44.100 kHz
Check to see what codec the Movie Inspector window shows.
OT

I accidentally clicked add to dictionary on a misspelled word when I was trying to click the right spelling for it. How can I undo that so it will catch the misspelled word?

I accidentally clicked add to dictionary on a misspelled word when I was trying to click the right spelling for it. How can I undo that so it will catch the misspelled word?

You need to edit a file in your profile folder, for details see [[using the spell checker]].

HT1212 I need to reset my ipad off my computer how do I do that ?

I need to reset my ipad off my computer how do i do that ?

Connect to computer, open iTunes, select your device under Devices, click on the Summary tab in the main window, click on Restore button.
Or:
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.

I purchased extra cloud storage and it shows 51 GB available yet there's no room for anything. How do I allocate that available storage?

I purchased extra cloud storage and it shows 51 GB available yet there's no room for anything. How do I allocate that available storage?

Whoa, it sounds like you're confusing two very different things.
iCloud initially comes allowing 5GB of free storage (for backups, etc.).
Your iPad (or are you talking about an iPhone in the wrong forum?) comes with some number of tens of gigabytes of storage, which cannot be added to.
So something doesn't make sense in your comment.

I bought my iphone 5 in the USA but am living in the UK. When I was trying to download apps, it said i need to connect to the uk apple store, how do i do that?

I bought my iphone 5 in the USA but am living in the UK. When I was trying to download apps, it said i need to connect to the uk apple store, how do i do that?

Settings > iTunes & App Stores
Tap on your Apple ID at the top
Tap "View Apple ID"
Enter password if needed
Tap "Country/Region"
Tap "Change Country or Region"
You may need to change to a UK credit card.

I need to forward two ports for a DVR HOW DO I DO THAT?

Similar Messages

Maybe you are looking for