I need to get help... edited by host

I need to get help... My Case ID: <edited by host>
My English is not good, please forgive me. But I need to get help
I purchased in China in March of 2t time capsule, can not open yesterday, which has important data.
China, Hong Kong Plaza Apple store genius to help me split out the hard drive, but I have no other large-capacity hard disk, there is no hard drive connected to the computer data lines.
I hope that the genius of the new time capsule give me that in China, Hong Kong Plaza Apple store, so I will transfer data from the old hard drive to the new time capsule in China, Hong Kong Plaza Apple store.
But genius manager: "Anthony Xu" bad attitude not only refused my request, has asked me to buy the apple store the backup hard drive data cable and a new mac computer! Even persecute me sign in confirmation!
Now, my hard drive in my hands, but I can not get data.
I contacted the Chinese 400 customer service, they could not help me. But they are eager to help me keep track of the entire event: <edited by host>
Who can help me T_T

Sorry, but we are all just fellow users here and have no power to intervene or assist in this issue. You will need to try and work out a solution with the Apple Store or Apple Customer Relations. The only alternative, if I understand correctly that the hard drive from the Time Capsule is working and contains your data would be for you to purchase a case for the hard drive, mount the drive in that case, and recover your data that way.
Regards.

Similar Messages

I need to get help removing my cell number from Imessage.

THis is unbelievable and I am going no help. APPLE can not keep a cell number hostage. Nor punish me for switching to a different phone. I love my Mac, ipad and Mac book pro.
Your are going to make it in possible to love your company when you do things like this, someone PLEASE help me get this fixed. My son and husband still have Iphones and I need to be able to send them messages.
Thank you, please help

https://supportprofile.apple.com/MySupportProfile.do
go here and remove the iphone from your profile and it will remove the phone number from imessage.

New computer needs new install. [edited by host]

Adobe STAFF person: Please Help! I purchased Adobe Suite from Adobe and threw away old computer. Now new computer needs new install. I don't have the CD's. 2 entire days wasted and still no response from CHAT!!!!!!! HORRIBLE! I don't like Forum because of scammers. I paid almost $3,000.00 for this suite and Adobe seems to have no customer support! It was a scammer the last time who tried to help! Outrageous! This is NOT RIGHT OF ADOBE after I did everything the right way and they happily took my money!

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

HT5649 I need to get help re-enabling my itunes account?

Can someone help me re-enable my itunes account? I had to have it disabled since my son's ipod was stolen and the itunes account was hacked.

Contact Apple for assistance > Contacting Apple for support and service
This is a user to user forum. Only Apple can help to reset your account.

I need to get help with my serial number that i already used on photoshop???? But needed it for lightroom what to do?

what can i do when i used my redemption code on the wrong program?

A Photoshop serial number will not work for Lightroom. They are separate programs, purchased separately, licensed separately, separate serial numbers.

I made a big mistake in purchasing ringtone Edited by Host ASAP; I'm afraid that my card will be charged a lot; please call me...I need a live person to help me on this matter

I purchased 2 ringtones in "i tune store", but i think i made a big mistake; please help me because Im afraid that i will be charged a lot; <Edited by Host> ; i need a live person to help me.
Catherine

These forums are not moderated by Apple, we are all Users like you.
Posting your personal phone number here is a terrible idea. I'll report your post to have a moderator edit out the sensetive info.
As to your actual concern, you can use iTunes Support, which also will refer you to THIS article (http://support.apple.com/kb/HT1933 about reporting issues with iTunes purchase

HT201210 I have done all of the things on this list, to include editing the hosts file with no the same error each time (3194). I am trying to restore my iphone 4 ios 6 to get it unlocked. Diagnostics show no issue communicating with apple. Help.

I am trying to restore my iphone 4 ios 6 to acheive unlock. hit restore and it unloads software, confirms with apple then displays the 3194 error. I have turned off my virus scanner, unplugged all usb except for iphone, edited the hosts file and run diagnostics which showes communication with apple is fine. What do I need to do to get my ipone to restore?

There is nothing wrong with the OS update.
Delete ALL your email accounts.
Restart Playbook
Put the accounts back and ensure they are all set with PUSH ON. Manual (push off) will burn battery.
Similarly delete your wifi connections and add back when required.
Turn off wifi is not connected to wifi.
Any "hunting for connection" in email or wifi will burn up battery.

Need help getting started -Editing software

Hello everyone
I need to get started with video editing on a Mac -
I didn't touch an editing software since 1998 , it was premiere 4.2 on a PC !
And didn't keep up with what's new but i'm now using a Mac!
I assume now most software allow realtime rendering, and have great tools !
So, I'd like to put together a holiday movie I shot on a DV camera-
once finished , it would either play from the computer connected to a Video projector AND / OR burned on a DVD .
I'd like to make something a bit creative : Split frames / moving Titles accross the screen etc...
my questions :
-If possible, I'd like to minimize the rendering process ( realtime?) What is a good editing software Imovie / Final cut ( which one?) / Premiere ?
-What can I use to create split frame ( video)
-What can I use to create moving titles ? ( important)
-Can this be achievable on a Macbook 1,83GHZ / 2GB of RAM/ 250GB EXT. Harddrive FW.?
Thanks for you inputs ( Open subject )
David

You don't need timecode to make frame accurate cuts.
You simply play or drag the playhead to roughly where you want it and then use the left and right arrow keys to move frame by frame to the exact frame you want.
Incidentally if you hold down the Shift key, each touch of the arrow key will jump 10 frames.
iMovie has a tremendous amount of potential which may be hidden away at first sight.
Take a look at those fantastic and easy to produce titles - the hardest part is typing the letters!
Incidentally, even FCE does not display the original tape timecode natively.
Ian.
P.S. The best way to unlock most of its secrets is to get a book. Most good libraries usually stock them or can get them for you.
Message was edited by: Ian R. Brown

Help needed in getting the previous Quarter Data

Hello folks,
I have this procedure where i have to modify the current procedure in the following manner:
I need to get rid of the variables p_start and p_end so that i cannot see them in the crystal report and include the Frequency in the procedure to get the Data based on the Dates.
and Main requirement is" If the Frequency is Quarterly " it should get the previous quarter Data, if "Frequency is monthly" it should return the previous month data.Can anyone please let me know where shud i make changes. Am including the procedure for refernce. Any help is appreciated
Thanks a millioin,
CREATE OR REPLACE PROCEDURE hcsc_recovery_report_h(report_record in out cr_return_types.gen_cursor,
p_start       string,
p_end         string)
IS
v_startdate date;
v_enddate date;
BEGIN
v_startdate := to_date(p_start, 'YYYY/MM');
v_enddate := last_day(to_date(p_end, 'YYYY/MM'));
open report_record for
select --distinct r.recovery_id
r.event_id,
r.event_case_id,
c.client_id,
c.client_code,
c.client_name,
b.branch_group_code,
b.branch_group_description,
g.employer_group_code,
g.employer_group_name,
e.client_policy_identifier,
e.date_of_incident,
e.event_type_code,
sum(nvl(r.amount, 0)) as amt_received,
nvl(sum(case
when r.amount >= 0 then
rd.fees
else
rd.fees * (-1)
end),
0) as fees,
ec.close_date, *001* commented
(case
when ec.close_date <= to_date(to_char(v_enddate, 'MMDDRRRR') || '235959',
'MMDDRRRR HH24MISS') then
ec.close_date
else
null
end) as close_date, --*001* added
get_case_value(ec.event_id, ec.event_case_id, v_enddate) as case_value,
nvl(etl.fee_percent_flag, 'N') workmans_comp,
max(to_char(r.recovery_date, 'FMMonthYYYY')) Year_Month,
max(to_char(r.recovery_date, 'YYYYMM')) Y_M,
max(to_date(to_char(r.recovery_date, 'MMYYYY'), 'MM/YYYY')) date_MY
from recovery r,
recovery_detail rd,
event e,
client c,
branch_group b,
employer_group g,
event_case ec,
event_type_lookup etl
where r.event_id = e.event_id
and r.event_case_id = ec.event_case_id
and ec.event_id = e.event_id
and rd.recovery_id(+) = r.recovery_id
and r.recovery_date between v_startdate and
to_date(to_char(v_enddate, 'MMDDRRRR') || '235959',
'MMDDRRRR HH24MISS')
and e.client_id = c.client_id
and g.client_id = c.client_id
and b.client_id = c.client_id
and g.employer_group_id(+) = e.employer_group_id
and b.branch_group_id(+) = g.branch_group_id
and e.event_type_code = etl.event_type_code -- SST 130852 04/14/09
group by r.event_id,
r.event_case_id,
c.client_id,
c.client_code,
c.client_name,
b.branch_group_code,
b.branch_group_description,
g.employer_group_code,
g.employer_group_name,
e.client_policy_identifier,
e.date_of_incident,
e.event_type_code,
ec.close_date,
get_case_value(ec.event_id, ec.event_case_id, v_enddate),
nvl(etl.fee_percent_flag, 'N')
having sum(nvl(r.amount, 0)) <> 0
order by c.client_code,
b.branch_group_code,
g.employer_group_code,
r.event_case_id;
Edited by: user11961230 on Oct 20, 2009 9:02 AM

user11961230 wrote:
1. I want to get rid of the p_start and p_end. So how do i declare the v_startdate and v_enddate in the following part?
v_startdate := to_date(p_start, 'YYYY/MM');
v_enddate := last_day(to_date(p_end, 'YYYY/MM'));I'm not sure what you mean by "declare".
In PL/SQL, "declare" means state (at the beginning of a block) that there will be a certain variable with a certain name (such as v_startdate) and datatype (such as DATE). You're already declaring the variables v_startdate and v_enddate correctly, right before the BEGIN statement.
Declaring a variable is not the same as initializing it, that is, giving it a value for the first time. Your next question seems to be about initializing..
2. where exactly shud i include the logic that u have mentioned. sorry a dumb questionIn place of the two assignment statments that reference p_start and p_end.
3. This time am gonna use frequency instead of report_type so that i will get rid of the p_start and p_end from the procedure.Do you mean you want to pass an argument (called frequency) that tells if you want a quarterly or a mionthly report, just like the variable report_type in my example?
If so, replace report_type in my example with frequency.
I think you want something like this:
CREATE OR REPLACE PROCEDURE hcsc_recovery_report_h
(      report_record         in out     cr_return_types.gen_cursor
,      frequency         IN           VARCHAR2
IS
     -- Declare local variables:
     v_startdate     date;
     v_enddate      date;
BEGIN
     -- Initialize v_startdate and v_enddate, depending on frequency
     IF frequency = 'QUARTERLY'
     THEN
          v_startdate := TRUNC ( ADD_MONTHS (SYSDATE, -3)
                                       , 'Q'
          v_enddate := TRUNC (SYSDATE, 'Q');
     ELSIF frequency = 'MONTHLY'
     THEN
          v_startdate := TRUNC ( ADD_MONTHS (SYSDATE, -1)
                         , 'MM'
          v_enddate := TRUNC (SYSDATE, 'MM');
     END IF;
     --   Subtract one second from v_enddate
          v_enddate := v_enddate - ( 1
                                        / (24 * 60 * 60)
     open report_record for
     select --distinct r.recovery_id
            r.event_id,
     and     r.recovery_date BETWEEN v_startdate
                     AND       v_enddate
     ...When you post formatted text on this site (and code should always be formatted), type these 6 characters:
(small letters only, inside curly brackets) before and after sections of formatted text, to preserve spacing.
Edited by: Frank Kulash on Oct 20, 2009 2:37 PM
Changed query to use BETWEEN

I need to get away from iphoto.   I use pixelmator for editing almost exclusively. I have a Sony disc hx200v camera and a Kodak.   I will need to know if my cameras (on mac) will be seamlessly supported and how to get all my existing photos safely to lig

I have several questions.   iPhoto does not meet my needs.    I would use lightroom mainly for organization and downloading photos from my camera cards.   My cameras are Sony disc-hx200v and a little Kodak I will need to know if they are fine with light room. Also I use pixelmator for photo editing and likely will use iskysoft dvd maker for mac to create my dvds once edited.      I am desperate to find a way to make my work flow work.   i.e.   I need to get photos somewhere on my mac, in this case it would be lightroom then I need to edit them in lightroom and pixelmator, then be able to get that album/slideshow/folder whatever you call it Into the dvd maker to voiceover and finish the project.      It looks like aperture would have been more to my taste but they are
also taking that away.   Yeah! Go Apple.   About all I will have left of use is an operating system and mail.     Will appreciate any help. I am 73 and doing dvd's for Amazon so I really can't afford any more programs that are snatched away and learning curves that change every 6 months.

Are you shooting in raw or jpeg?
I’m not sure there is raw support for your Sony model and you don’t say which Kodak you have. But for jpegs Lightroom will normally work.
For your existing photos it would usually be necessary to export versions to the desktop or create new folders in Finder. Those duplicates will contain the editing adjustments you have already made and can be imported into Lightroom using “Add” in the import dialog.
I would suggest you download Lightroom and use it free for 30 days. You can then test it to ensure it meets your needs. You can download from this link:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5856

I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

See if exporting them helps:
Exporting From iPhoto | Apple Support Communities
Gene

Need to Get Data From Siebel On Demand ( I am new to Siebel Please Help)

Hi All,
I have a project in which i need to get data from Siebel On Demand and Automate this process.
I have downloaded the Custom WSDL file and the Schema file from Oracle Siebel On Demand. I am using IDE WSAD and when i import these files into WSAD i am getting an error stating the schema definitions are wrong. Can anyone help me.....
I need to complete it asap....
Edited by: user491578 on Nov 11, 2008 6:50 PM

You should probably ask Advantech. This question really has nothing to do with LabVIEW SE or NI-ELVIS. You could try posting to the LabVIEW board but there have only ever been two posts regarding 'advantech 4716'.

Have HVX200, need to get footage to PC HELP!!!!

Ok, so I have an HVX200 and final cut 4.5 and since 4.5 doesn't recognize p2 files and I can't get FCP 5 without paying the full price (I have the academic version and you can't upgrade it), i'm having to do a capture directly from the camera. So after ALLL that, i need to get it to my pc because i have the PC version of magic bullet.
Here is what i need help with. How in the world do i export FULL HD quality footage that my PC can recognize. I have macdrive so i can see the files, but they don't have an .Mov file extension and therefore i can't open it. Can anybody please help me with this. It would be greatly appreciated.

Don't know if I can help, but I'll see what I can do (I own a PC for gaming only).
What codec did you capture from the camera as? What program on the PC are you using to edit? Does that program support the codec you captured as? Can the PC recognize the Mac formatted disk? If not, you may have to reformat it for the PC, then put the files on there.
But really, you need to know if the PC and editing application on the PC supports the codec you captured as. If not, it won't work. What might be the better option is to buy Magic Bullet for FCP...it only runs $295...
Shane

I have a movie in iTunes that I need to get into iMovie?? Help please asap, I have a movie in iTunes that I need to get into iMovie?? Help please asap

My friend and I had to film a movie on her computer and then get it to my computer. We shot it on iMovie and then shared it to iTunes. we then jump drived it to my computer and it is in my iTunes. I need to get it back to my iMovie so I can edit it. I need this help soon and I am open to trying anything. If you have an idea, please share!!!!

Do you still have access to the project on the other computer?
If so, here's a better way of moving the project from one Mac to another.
http://support.apple.com/kb/HT1026?viewlocale=en_US&locale=en_US
Matt

Some help needed for improrting and editing

Hi,
I need a litle help with two issues.
1) I was trying to edit a photo but when i click the edit button, I can see the photo at the top of the screen in the film strip but not in the edit screen and I have also noticed for this particular picture I cannot view it in full zoom. All I can see is an " ! " mark.
2) I deleted this picture and tried to import again but iphoto states that it cannot import because it already exists. I tried closed the program, deleting the cache.

Derek
It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss
iPhoto is a database and like any database it needs you to manipulate the data via the app itself, and not via a back door. So, that's why it thinks the pic is still there - because the entry in the database is still there.
The correct way to remove a pic is to move it to the iPhoto trash and empty the iPhoto trash. This will remove the pic from the database and the HD.
Now your database base is bunged up you have two choices: one is to return things precisely the way they were the other is to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Assuming you renamed a file to make it easier to find:
There are three ways (at least) to get files from the iPhoto Window.
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser. Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. If you're willing to risk database corruption, you can restore the older functionality simply by right clicking on the iPhoto Library and choosing 'Show Package Contents'. Then simply make an alias to the folders you require and put that alias on the desktop or where ever you want it. Be aware though, that this is a hack and not supported by Apple.
Regards
TD

I need to get help... edited by host

Similar Messages

Maybe you are looking for