I need to graph data and stack the plots to create 3 graphs, how do I plot more than 1 data line on each graph

I currently use a code heavy solution thats clunky and need to refine the graphing part. For simplicity I want to use the waveform chart and its "Stack Plots" option. However I cannot see how to collect 2 or 3 data streams and display them on 1 of the stacked plots.
The final verson will have 3 stacked plots, the top plots needs 3 data streams, The middle & bottom plots require 2 data streams.
Help Appreciated

Hi,
Sometimes the Synchronous Display option makes a difference (right
mouse>advanced>Synchronous Display). Or while running, right click>Smooth
Updates. Fiddle around with them, sometimes unexpected settings has the best
performance (only four combinations anyway).
Regards,
Wiebe.
"CB" wrote in message
news:50650000000500000005810100-1079395200000@exchange.ni.com...
> Dennis,
> Thanks for that, I had tried your solution earlier while developing
> the package. A bit dissapointing the stacked plots wont work. it'd
> save lots of code and simplify the whole graphing part of my package.
> I am reluctant to overlay transparent graphs etc on top of others
> because I am aware it could hinder performance, I am doing a lot in my
> pac
kage and need to get the most out of the machine. My current
> solution is nearly ok and consists of 3 waveform charts contained in a
> cluster. I need the 3 charts to line up accurately and be of identical
> size which involved plugging into the various sizing/xy line up params
> which was a bit fiddly. The main problem is the bottom graph seems to
> end up lagging at some point which gives doesnt look too good. When
> the PC gets loaded up with too much work its best effort means the
> bottom graph get missed out (or something like that) occasionally. I
> have noticed this on all the machines it has run on even my new 3Ghz
> machine.
> I am sure this could work ok but I cannot figure how to force the
> graphs to only continue once all 3 have their data.
> Thanks in advance, Regards, Chris

Similar Messages

Every time I create a new row, I want a certain cell to display the date and time the row was created. How do I do that?

=NOW() updates the date and time continuously, I don't want to do that. I just want the date and time in that cell to stay the same after that row is created. Seems like this would be easy, but I can't figure it out.

My preferred scheme is a variant of Barry's proposal 2
create the new row
select the cell in which you want to insert the date
type the shortcut dedicated to one of the four "Insert date" services delivered with WordService from Devon Technologies (FREE)
On a French keyboard, only one of the default shortcuts apply : cmd % which inserts the long date.
But we may edit these shortcuts.
Yvan KOENIG (VALLAURIS, France) mercredi 6 juillet 2011 15:12:16 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

HT1386 my Ipad will not up date and sync the newer version software( 5.1) even after i click up date.

I have tried over and over again add the new version of software to my ipad. it will not load it. My phone loaded IOs 5.1 and has Cloud. but the Ipad will not. I need help.? could it be something in my settings?

Without anything more than your blanket statement that the software will not load, it is difficult to suggest anything more than the standard boilerplate stuff. Does the update start at all? Is the iPad being recognized in iTunes?
Try temporarily disabling your firewall and anti virus software and then try to download and install the update.

I have multiple iphones and want to use find my iphone how do I track more than 1 phone

How do I set up multiple iPhones on 1 account for "find my iPhone"?

Find My iPhone is tied to the iCloud account that each device is using. You can track all your phones without sharing the same iCloud account by going to icloud.com, signing into the account that the phone you want to track is using, and clicking Find My iPhone. This can also be done from your phone by using the Find My iPhone app (available in the App store).
Of course, you could track them all using a single ID if you were willing to share the iCloud account across all the phones. However, there are significant disadvantages to doing this. They would all share the same 5GB of free iCloud storage, the same iCloud email account, the same photo stream, and all the synced data (contacts, calendars, notes, reminders, etc.) would be merged across all of the phones. If they belong to different people, you would end up with each other's data on your phones.

How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

I downloaded the Avatar soundtrack, but certain songs play halfway then just cut, and play the next track...how can I get a refund or re-download?

I downloaded the Avatar soundtrack and in the downloads sections, all music downloaded to complete, yes more than half the tracks play halfway then just cut out and play the next track...it's awful...how can I resolve this??

I THINK I have solved the problem. Can't be 100% because I don't want to try a restore. At least the Apple home page lites up correctly with quicktime now. It hadn't in the past.
Thank you for your assistance. - LRB
desktop Windows XP

How can I select more than one song from the search results?

I want to create playlists based on certain words in the song title. For example, I may want to create a playlist of all my songs with LOVE in the title.
Doing the search is easy, but I can't select more than one song at a time. Is there any way in iTunes 12 for Windows to do this? I found an answer in iTunes for Mac, and it basically says to "un-check "Search Entire Library." " but I don't see that option in iTunes for Windows.
Here is the link to that question: how can i select more than one song from drop down search bar
I hope some Windows user can help me out.

Found the "Search Entire Library" option - click on the small (VERY small for my eyesight) down arrow next to the magnifying glass. Also need to select "Filter by: Songs", and then the songs in the main window show the results.
I'm going to leave this up on the board because 1) in case someone else has this question, and 2) I don't know how to delete it anyway.

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

Yes, you can.
This is a special feature of the AirPort Express 802.11n. You will have to set it up "manually" to "enable Ethernet clients".
If your "main" AirPort Express is an 802.11n version, it is also possible to setup the second Express to "extend a wireless network" to provide additional wireless coverage in addtion to enabling the Ethernet port.
If you need the steps, post back to let us know what operating system you are using on the Mac or PC that will be used for the setup of the new AirPort Express.

Copy control for dates and disable the input

Hi All,
I have the following problem: I'm trying to copy dates in a follow-up order from the source order (which works fine by implementing the CRM_COPY_BADY method DATES) and disable the input of the copied dates in the follow-up order (which doesn't work).
In the change-parameter CT_INPUT_FIELDS you can specify the fields which have to be copied and furthermore you can control the modifiability of the field in the follow-up order via the parameter CHANGEABLE (e.g. 'A' means field can not be changed). This technique is the same in all methods of the copy BADI.
Unfortunately it doesn't work for the dates. As I said already, the date is copied but can be changed by the user in the follow-up order.
Anybody an idea?
Thanks and best regards, Lutz

Dear John,
Actually, I have tried with copy requirement 2.However, it works for copying a different customer with the same sales area as original. Yes, I may need to ask developer to solve my solution. But I would like to keep it to be the last choice. I tried to search "How to copy document between inter-company businees"; but the I still not get what my custome's want. Anyways, thank you very much for sharing idea.

When attempting to format region and set date and time the busy icon appears and seems to stay like this?

when attempting to format region and set date and time the busy icon appears and seems to stay like this?

Click on DU's Partition tab when you have the raw drive name selected, then set it to one partition, Mac OS Extended. If it crashes or freezes, it is finding a bad block and can't write.
In any event, if you want to use the drive, and have not zeroed it before, you should now.
Click on Erase -> Security Options -> Zero out data. Still with the full drive selected and not any partition(s).
Then repartition the drive if needed.
Boot from the DVD if that doesn't work. And no, TTPro has never mapped out bad blocks let alone create partitions.
Disk Utility in 10.4.8 is quite good, excellent in fact. No need for an alternative.
Your eMac drive may need to touch of Disk Utility itself. FSCK from the command line, clear the caches with Applejack along with check for corrupt plists. Between Disk Utilty and Applejack (free/shareware) never had to use TechTool Pro - or at least there weren't any errors after those two got done. But if you want a good 3rd party, pick up Disk Warrior 4.

How to Read the one Source Column data and Display the Results

Hi All,
I have one PR_ProjectType Column in my Mastertable,Based on that Column we need to reed the column data and Display the Results
Ex:
Pr_ProjectType
AD,AM
AD
AM
AD,AM,TS,CS.OT,TS
AD,AM
like that data will come now we need 1. Ad,AM then same we need 2. AD also same we need 3. AM also we need
4.AD,AM,TS,CS.OT,TS in this string we need AD,AM only.
this logic we need we have thousand of data in the table.Please help this is urgent issue
vasu

Hi Vasu,
Based on your description, you want to eliminate the substrings (eliminated by comma) that are not AD or AM in each value of the column. Personally, I don’t think this can be done by just using an expression in the Derived Column. To achieve your goal, here
are two approaches for your reference:
Method 1: On the query level. Replace the target substrings with different integer characters, and create a function to eliminate non-numeric characters, then replace the integer characters with the corresponding substrings. The statements
for the custom function is as follows:
CREATE FUNCTION dbo.udf_GetNumeric
(@strAlphaNumeric VARCHAR(256))
RETURNS VARCHAR(256)
AS
BEGIN
DECLARE @intAlpha INT
SET @intAlpha = PATINDEX('%[^0-9]%', @strAlphaNumeric)
BEGIN
WHILE @intAlpha > 0
BEGIN
SET @strAlphaNumeric = STUFF(@strAlphaNumeric, @intAlpha, 1, '' )
SET @intAlpha = PATINDEX('%[^0-9]%', @strAlphaNumeric )
END
END
RETURN ISNULL(@strAlphaNumeric,0)
END
GO
The SQL commands used in the OLE DB Source is like:
SELECT
ID, REPLACE(REPLACE(REPLACE(REPLACE(dbo.udf_GetNumeric(REPLACE(REPLACE(REPLACE(REPLACE([ProjectType],'AD,',1),'AM,',2),'AD',3),'AM',4)),4,'AM'),3,'AD'),2,'AM,'),1,'AD,')
FROM MyTable
Method 2: Using a Script Component. Add a Derived Column Transform to replace the target substrings as method 1, use Regex in script to remove all non-numeric characters from the string, add another Derived Column to replace the integer
characters to the corresponding substring. The script is as follows:
using System.Text.RegularExpressions;
Row.OutProjectType= Regex.Replace(Row.ProjectType, "[^.0-9]", "");
References:
http://blog.sqlauthority.com/2008/10/14/sql-server-get-numeric-value-from-alpha-numeric-string-udf-for-get-numeric-numbers-only/
http://labs.kaliko.com/2009/09/c-remove-all-non-numeric-characters.html
Regards,
Mike Yin
TechNet Community Support

OFI_AP_4 Delete all data and REINIT the load to FIAP ODS and Cube

Hi bw GURUS I need a quick help, I have requirement to Delete all data and REINIT the load to FIAP ODS and Cube i have data source ofi_ap_4, please tell me what should i do as i know LO extraction but whats is the transaction code to run the set job for FIAP like for Purchasing I have OLI3BW now tell me what will be the steps to reinit the load to fiap ods and cube.
i know this much as below
Delete the data from cube and ODS
Delete the Init in Cube AND ods NOW reinit i mean load the init, but now problem is before doing that i need to run the set up job or tell me what are the steps please
its very important since i am doing in production
thanks
Soniya

You are right by your approach to update from PSA to ODS as u have wrritten before. Just got to PSA tree select the PSA request and choose update Immediatly or scedule for update.
(and if u have 0FI_GL_4 but u r not using it ..it is fine. I was telling that in case u have that and you are trying to use somethin with 0FI_AP_4)

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.

I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames.

I recently tried to update my iPhone 3 software via my mothers Mac book comp - during the upgrade I lost all my music and calendar dates and now the iTunes on my phone has my mothers iTunes detail - how do I get all my info back on the phone?

I recently tried to update my iPhone 3 software via my mothers Mac book comp - during the upgrade I lost all my music and calendar dates and now the iTunes on my phone has my mothers iTunes detail - how do I get all my info back on the phone?

Restore it using the computer you normally sync with.

Intel iMac running 10.5.8. Belonged to a relative who has passed away. I want to wipe all data and give the iMac to my grandson. I have no install discs. How do I proceed?

Intel iMac running 10.5.8. Belonged to a relative who has passed away. I want to wipe all data and give the iMac to my grandson. I have no install discs. How do I proceed?

Contact Apple (call AppleCare) and for a nominal fee the discs will be replaced. You can do that or purchase Snow Leopard (still availble from Apple for $20) and do an erase and install of OS X making the machine like a new machine.

I need to graph data and stack the plots to create 3 graphs, how do I plot more than 1 data line on each graph

Similar Messages

Maybe you are looking for