I need to have furhter options on my VI(for HP 8712B RF Network Analyser)

Hi,
I've downloaded the HP 871Xb driver for Labview 6.0 from the NI website that also had a getting started vi which has the basic data acquisition features. I also had a look at the other vi's provided but those too didn't have the features I'm looking for.
I want my vi to have options like Amplifier->(Transmission / Reflection / Power) menu. Also an Averaging menu with Average On/Off and Average Factor options. Also a source menu where I can choose the Number of Points. Also it should have Log mag/Lin mag/SWR/phase/real/imaginary/impedence magnitude options.
None of the VI's provided by the driver had these options.
Is there anyway I could program a VI with these options. Or better
yet, is there any place I could download a VI with these options already available.
Thanks,
Kunal.

Hi Kunal,
The fastest way to get a solution for your problem is to write those features by yourself. You can look into the manual for that instrument and contact the instrument manufacturer for some help.
You can submit a request to add all the features that you want in that driver on our website as well. If you want to do so then go to:
http://www.ni.com/devzone/idnet/other.htm
There are some other websites listed on this page where you can look for a driver of your interest.

Similar Messages

  • What's the deal with the swoosh sound when sending texts? IOS 5.1 needs to have an option to turn it off., What's the deal with the swoosh sound when sending texts? IOS 5.1 needs to have an option to turn it off.

    What's the deal with the swoosh sound when sending texts? IOS 5.1 needs to have an option to turn it off., What's the deal with the swoosh sound when sending texts? IOS 5.1 needs to have an option to turn it off.

    Trax and kirt are correct. I'm pretty good with technology, being an engineer and all, and I can tell you for a fact that this 'swoosh' sound (triggered by a successfully sent SMS) can NOT be disabled from ANY menu in iOS 5. The ONLY way to disable it is to flip the silent switch on the left hand side of the phone. This is extremely annoying for some people (like trax, kirt, and myself). For what we pay for Apple products and, in particular, this phone, we simply didn't expect to have to deal with such annoyances. That's why we're Mac users. Please fix this bug.
    I feel like I shouldn't have to say this but it bears repeating: turning off message sounds from the 'sounds' menu does not fix his problem. It still emits the swoosh noise. Whoever suggested this clearly didn't try it because it obviously doesn't work. Who posts a solution to a problem without knowing for a fact that their solution is correct? I find that response condescending because he writer is assuming we're not smart enough to have tried it. In reality, it's vice versa.

  • I have installed Adobe Acrobat XI on citrix (server 2008, x64) and need to suppress repair option in Help menu for the users via registry.

    i have installed Adobe Acrobat XI on citrix (server 2008, x64) and need to suppress repair option in Help menu for the users via registry. Have tried Disable_repair dword key in HKLM\software\Wow6432Node\Adobe\AdobeAcrobat\11.0\Installer and it does not work. please help.

    Look in the ETK Preference Reference here:  Installer settings

  • I have the iPhone 4 and I put a vanilla gift card visa on there and i used all the money on there I can't update any of my apps till I get rid of the gift car and I don't want to put another card on there please help me I just need to have the option none

    I have the iPhone 4 and I put a vanilla gift card visa on there and i used all the money on there I can't update any of my apps till I get rid of the gift car and I don't want to put another card on there please help me I just need to have the option noneI have the iPhone 4 and I put a vanilla gift card visa on there and i used all the money on there I can't update any of my apps till I get rid of the gift car and I don't want to put another card on there please help me I just need to have the option none I've checked.

    Need to Resume download to complete the ongoing Process.
    Last Resort, put the iPhone in DFU mode (Google How to do that). Connect in iTunes. Follow on-screen prompts to Restore. All Data would be lost, if not backed up earlier.
    To save the photographs you may have to use third party software. Google is your friend.

  • Why can't I set up POP/IMAP emails for my Muse website in Business Catalyst? I don't have the option 'use this service for email as well as hosting the website' under Advanced options

    Why can't I set up POP/IMAP emails for my Muse website in Business Catalyst? I don't have the option 'use this service for email as well as hosting the website' under Advanced options.
    Is this due to my Hosting Plan? Appreciate any answers.

    Your site is a CCM site which is on a WebBasics plan (This plan does not provide hosted emails on Business Catalyst).
    If you want to create email addresses on this site, you would need to setup your email server elsewhere and configure the MX records on your site to point to that external mail server.
    If you want to use Business Catalyst's hosted email services you would need to use a WebBasics+ or higher siteplan. To upgrade your CCM free site, Access your site's admin area  -> Site Management -> Upgrade Now -> choose the desired site plan and billing frequency -> Add personal and credit card details -> Submit.
    Please refer this article about setting up email accounts on your BC site: http://docs.businesscatalyst.com/user-manual#!/site-settings/email-users
    For setting up records to point to external mail server, check out http://docs.businesscatalyst.com/user-manual#!/site-settings/email-users/creating-inboxes- for-your-users
    Regards,
    Surjeet

  • HT4623 I have the original iPad and I don't have an option in Settings, General for Software Upates. The App Store only has a Spanish version. Does anyone know how I can update to iOS 5?

    I have the original iPad and I don't have an option in Settings, General for Software Upates. The App Store only has a Spanish version. Does anyone know how I can update to iOS 5?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • What licenses are needed to have CUCM not in demo but for LAB

    I am trying to build a lab with new versions of CUCM 9.1
    I do not want to use demo versions for 60 days nor request a temp license for 6 months.
    what is the minimum licenses i will need to have CUCM in full production mode for Lab somulation and with the least cost?

    Hi.
    If you are a Cisco partner, you can obtain an NFR kit at a reasonable price.
    Check the following link.
    http://www.cisco.com/web/AP/partners/promotions/nfr/index_nz.html
    HTH
    Regards
    Carlo
    Please rate all helpful posts
    "The more you help the more you learn"

  • Do I need to have a .MAC account in order for me to purchase a photo book?

    Do I need to have a .MAC account in order for me to purchase a photo book?

    No. You do need an Apple ID, which is the same thing you'd set up to buy content on iTunes or stuff from the Apple store online. This doesn't cost you extra, e.g. $99 for a .Mac account, but you do need to set it up with a credit card.

  • I need to have both Next & Back buttons displayed for viewing 20 records at

    Hi Everybody,
    I have a JSP page which has 2 part: The header (Selection for search with the SEARCH button) and a search result table.
    Is it possible to remember the last record printed & start from the next record when I click on "Next" button? When I click on the "Next" button will it create new page? I need to have both Next & Back buttons displayed for viewing 20 records at a time.
    The current JSP is using "session.removeAttribute("XXXWorkItemVector") to print out records.
    I'm very new to JAVA and JSP, so please help me with my assignment and send me e-mail to [email protected]

    Check this:
    http://forum.java.sun.com/thread.jsp?forum=45&thread=188239
    This should be of help to you.

  • Why do I only have photos option to choose from for uploading my resume?

    I'm applying for jobs and have Dropbox plus PDF but when it comes to attaching my resume on job sites I only have the option to choose from photos.  Why?!!!!  Why in the heck do I only have this ONE limited option?  I have PDF and Dropbox- how come I can't choose my resume from there to attach my resume on job applications on line? 
    Is there some setting or some kind of control I need to fix?  Any feedback appreciated. Sorry, I'm frustrated!

    There are are certain functions that can only be executed during the "WhilePrintingRecords" pass of the report execution. Any formula that uses one of these functions cannot be summarized.
    Also any formula that is is based on aggregated values cannot be summarized.
    HTH,
    Jason

  • Do we need to have Multiple Vendor Roots in PPOCV_BBP for Multiple back end

    hi Gurus,
    Do we need to have multiple vendor root orgs in PPOCV_BBP, when
    we have mutliple backends to be linked to the same SRM server ?
    Please do provide your valuable inputs.
    Best Regards
    Prashanth

    Hi
    Ideally, you should have only one Root node for Vendor.
    Please refer to these links.
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/b4/9de8cc7d4b11d2b423006094b92d37/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/e5/1c6d3e40753f7ce10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm</b>
    <u>Also refer to transaction - BBPMAININT in SRM Web page for Business Partners.</u>
    Hope this will help.
    Please reward suitable points, incase it suits your requirements.
    Regards
    - Atul

  • I need to have update option for the apps already installed on Afaria

    I already uploaded apps on Afaria client. After that I make some changes to the app and again uploaded the apk and ipa of Apps. For the users who already installed apps previously , got UPDATE option. But they face following error while updating app.
    In a nutshell user cant update his app but he has to uninstall it and again download and install it. Can anyone suggest solution for this?

    Hi Aditya,
    After making changes to the project you need to create apk from it with the same certificate that was created for the first time. I believe that the android developer is creating new certificate each time when the app is updated, resulting in this issue.
    Regards,
    Midhun VP

  • Do you need to have OS X to use imessage for mac?

    I was useing my mac, and i wanted to get a imessage account. I was wondering if you need OS X to use it.
    If so, does OS X  do anything to harm or slow down your mac?
    -Leeisawesome

    If you have a Mac, it should have OS X installed on it.
    OS X is the operating system that allows you to use your Mac.
    Allan

  • Why does my firefox 6.0.1 go not responding every time I open a second tab? I need to have more than 1 tabs open for what I'm doing.

    Details: I open browser to go to page. From there I open second page which I've always been able to do and it won't load. It says no responding and sits there forever deciding what to do. Then it will finally say something about stop running script, which I just let it run or x it out. Either way, it shuts down or it might load or just sit there. I've always loved firefox but I'm it's upsetting me as I can't do things on my computer now I need to do.

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Do I need to have it set to Game Mode for Alchemy to wo

    I have the dreaded cracking/popping right now and for whatever reason this goes away when I put my X-Fi into either Entertainment or Audio Creation mode.
    Can I keep the settings in Entertainment mode and still have ALchemy give me EAX when I run Alchemy supported games?

    Yes you must be in gaming mode, you have to run ALchemy and add your games, then switch them to the enabled side. http://img65.imageshack.us/img65/722...2007098su2.gifBut now my game performance sucks, I had way better fps with my SB Live! 5.

Maybe you are looking for