I need to have your help movung my bookkmarks.Can you call me so I can explain the problem?
I have paid " OBOWL " to clean -up my computer and reset it,but they could not restore my old bookmarks list like I had before. I told them in the past that I would go to a restore point to get them, but as I suspected, they told me this would mess up all the work that they had done. They said these files were from Firefox and I would have to see if you could help me. Please give me a call at xxx-xxx-xxxx. Wayne Overby I would like to know if you are receiving this message.
Firefox keep everything in firefox profile, if you didn't delete that folder, you can able to restore your bookmarks, password etc.
Try these
*http://kb.mozillazine.org/Lost_bookmarks
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
Similar Messages
-
please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins restoring but then it shows unknown error 1015
Stop being impatient.
From the article that the question was posted from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
You cannot downgrade.
If you have a 3GS, you can only install iOS 6.1.3 which is the current version of iOS for the device. -
I have mountain lion installed on my macbook pro 15. But I need to install a new copy of MAC OS X which came preinstalled. But recovery downloads this software every time I do so. I need to have an original setup so I can use it as and when required without internet.
Save the Downloaded install files to an external drive and use Lion Disk Maker to create a Boot/Install USB stick from it.
You can also Clone your internal drive to an external and then use that Clone to Re-Clone the internal from it when needed.
You can also use a separate external drive to make a Time Machine Backup of a Fresh install of Lion or Mt Lion and then when needed use that separate TM backup to restore your system to Factory fresh state.
There are many way to have a Fresh install of OS X on your Mac without having to download the OS install files every time. -
Firefox is it the only browser that you need to have your task manager open with in order to surf?
Firefox is it the only browser that you need to have your task manager open with in order to surf?
Nothing much to see on that site, but I don't have a problem opening the page. See screenshot.
Try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit. -
I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?
Did you format the drive for Mac use before you tried to use it as a backup drive?
Are you using Time Machine on the drive? You can't view the contents of its backup database and the only way to access the info is directly from the Time Machine app. -
My wife and I own an iMac (April 2011) and just recently got iPhones. We share one iTunes account (mainly for our uploaded music from CD). Do we each need to have our own iTunes account? What about iCloud? We want to utilize the same Calendar/Contacts
JoeyV325 wrote:
Is there a way to move music/apps from one ID to a new ID?
No.
One of you create a new AppleID and one use the existing AppleID.
But you can still use the items in each iTunes library.
Create separate computer logins for each of you.
This will give you each your own data. Contacts, calendars, photos, etc. (and your own iTunes library). -
I need to have my macbook pro repaired how can I hide passwords and banking info?
I need to have my macbook pro repaired how can I hide passwords and banking info?
Create a new admin account named repair and only give them the password for that account. Alternately you could back up or clone your system, erase the hard drive and then reinstall OS X with one admin account that has no personal information.
-
Subject:
Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz helpSettings>General>International.
Set the calendar to "Gregorian". You have it set to Buddhist. -
Because I have taken over 9,999 images, my phone is now duplicating image numbers. The problem is that Image Capture now imports BOTH images when I select the new ones that share numbers with old ones. The images were completely mixed when they showed up in Image Capture - Old image 0001, new image 0001, old image 0002, new image 0002 and so forth. I clicked on "date," which then rearraged the images, and I selected only the new ones, but when they actually import to my computer BOTH old and new images are importing. Has anyone figured out how to solve this problem?
Well, obviously all I needed to do to solve the problem was to post about it. It has stopped, so all is well!
-
Apple come on added Russian Siri.. so much people have yours iphone and all of them want Russian SIRI ! it`s so big problem learn Siri Russian !?
http://www.apple.com/feedback/iphone.html
-
I Baught A iMac 2010 From Someone it came with lion but for the programs i use i need snow leopard but when trying to install it won't boot from usb or cd what can be the problem i've been at this for over 24 hours if anyone ca help it'd be greatly appreciate it! Thanks!
Downgrade OS X Lion To Snow Leopard [Video How-To]
http://www.cultofmac.com/110614/downgrade-os-x-lion-to-snow-leopard-video-how-to /
How To Downgrade OS X Lion To Snow Leopard: The Complete Tutorial
http://www.redmondpie.com/how-to-downgrade-os-x-lion-to-snow-leopard-the-complet e-tutorial/
How To Downgrade from Apple OS X Lion to Snow Leopard
http://www.pcmag.com/article2/0,2817,2389334,00.asp -
I have recently upgraded my mac and ipad to IOS7 and find that Safari will not load onto my iPad. It just shuts down the app. Any ideas? I have been onto Mac who took me through a very long iPad robot, but the problem is still the same! Help appreciated
Do you mean that you did a soft-reset ?
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
If that doesn't fix it then try closing Safari via the iPad's multitaskingbar and see if it works when you re-open it :double-click the home button to open the taskbar and then swipe or drag the Safari app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
After trying the above you could also do a soft-reset (even if this is what you've already done it might be worth trying after clearing Safari's cache and closing the app via the taskbar) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else... -
Automatic backup failed
I have enough capacity but its constantly give me this failure
I cannot safe photo when i see them on a site
What can be the problem ?You say you have enough capacity (on icloud), but it could be that the device's memory is near full (for a backup, the device needs a certain amount of free memory for working files).
Go to
Settings>General>Usage. This tells how much storage is used on both iCloud and on the device.
As for photos - do not use icloud as a storage location for them. First of all, only photos in the camera roll are backed up. Even then, many user have reported that when they have performed a restore of an icloud backup, the photos were not synced and ended up being gone.
IMPORTANT...
Photos should be regularly synced to a computer (like you store photos from a digital camera) using either USB via iTunes (on a mac use iPhoto or Aperture to move them to an album) or using photo stream. If you have been doing that, then you can sync those photos back to your device if ever they get erased on the device.
If you haven't been saving photos except relying on iCloud to store them in a backup, then that is risky, as many users have discovered.
Now - about backups failing...
If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one. -
PSE trial 12 installed just fine but when i start the editor it opens and shuts down after about 2 seconds without an error, the only thing that appears is a message with 'continue trial'.
I have windows 8.1 64 bit and i already installed the latest video drivers, intel hd 4000 and nvidia geforce 710M.
I also installed premiere elements version 12 with the same problem.
What can be the problem here, please help?
Thanks.
Wim.Hi roberto-
Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
-sag
Maybe you are looking for
-
My form was working properly but today, 20 June, an applicant clicked on the website link and got an error that says, "error opening document, please try again later". How can this be fixed?
-
Problem with loading column chart in flex2
Hi All, I am facing a strange problem in designing a column chart. I have a page where i have two column charts. The data providr for both the charts is same. I have an xml with three categories of values, and each chart uses two of these with one o
-
Functionality of queries to be added to custom ALV GRID program
I have got a requirement in which we have created a custom program. Earlier it used to be a query for that. Now the customer wants the same options such as ABC analysis , Graphics , Import to excel, word processing etc., options to be added to the cu
-
Small Problem with Combo Boxes
Hi again everyone I am currently trying to add results to a Java league system.I am trying to update the number of games played for the team that has been selected by the combo box1 but it will will not compile The code for this is below newLeague.ge
-
Hi When I send non-ASCII content in the body of a mail, the content does not appear correctly in the mail body. <BR> THe ccode is as below msg.setHeader("Content-Transfer-Encoding", "quoted-printable" ); <BR> String a = MimeUtility.encodeText("�later