I need to install LabView RT on a cFP-2010, but I only have LabView RT 2012 (need 8.5.1???)
Hello,
I have a cFP-2010 module that I got ahold of which has a software problem. When I got into the module through MAX, I got a message that said there was no software loaded and that the module was operating in safe-mode. I rebooted the cFP-2010 in user directed safe-mode and reformatted the disk. According to online documentation, the latest version of LabView RT that will work on a cFP-2010 is LabView RT 8.5.1. The only version of LabView RT that I have to work with is 2012. How do I load 8.5.1 on this module to get it working again? Is there a download available somehwere? When I go to load software on the module in MAX, there is no option for installing LabView RT... which appears to be what is required. Thanks!
Hello mdlund0,
If you do not have LabVIEW 8.5.1 and LabVIEW Real-Time 8.5.1 installed on your computer, then you will not see the option in MAX to push that software to your device. In order to optain that software, you will most likely need to contact your account representative. You can reach the NI customer service line at (800) 531-5066.
In terms of version compatibility, newer versions of LabVIEW are not supported on the cFP-2010 because of the limited memory available; the older software does not take as much space. This does not mean that you will be unable to use newer versions, just that the behavior is unsupported and the configuration not recommended. I would also like to inform you that you can interface with a FieldPoint device without having Real-Time installed on that device. You can both install software and pull data programmatically without having Real-Time. Please see these references for more information:
Install Software Without Having Real-Time: http://digital.ni.com/public.nsf/allkb/CE57D76B598AEA878625740C00671AF8?OpenDocument
Use FieldPoint Without Having Real-Time: http://digital.ni.com/public.nsf/allkb/0EFE203B68668366862577CE005654F1?OpenDocument
Hopefully these resources will be useful for you. Good luck working with your device!
Regards
Patrick
CLA
Similar Messages
-
HT3500 help i need to install my epson printer to new imac but do not have a disk
hi,
does anyone know how to set up an epson printer to an imac without install disk. I have been trying to do this for three nights....anyone can you help??????
NishaI suggest that you contact Epson support for another installation disk, or possibly a file that you could download.....if it is not too large.
Epson Support - Drivers, FAQs, Troubleshooting, Technical Support ... -
I Need WiFi in my dorm room, but I only have a plug.
I need to get wifi in my highschool dorm room, but I only have acess to an electrical plug. Is there a router I can buy that I can use to get wifi?
If the school doesn't internet, you're out of luck, unless you have a smart phone and are willing to pay to use it as a WiFi hotspot.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun. -
I purchased and installed the Photoshop Photography Program last year but my computer crashed and now I need to re-install it again...can someone help?
Hi Sangeeta,
For a fresh download on a new hard drive, it's best to start with the CC desktop app. Sign into adobe.com and download it here: creative.adobe.com/products/download/creative-cloud
You can then launch the desktop, sign in and download PS & LR. -
Have a macbook pro 2009 currently at version 10.5.8 need to install new version for i phone 5 but will not let me until I install MAC OS X Version 10.6 cant find this anywhere! Any ideas thanks
Click here.
(75139) -
Okay, I keep getting this prompt That says "To view this context, you need to install the Java Runtime Environment...I believe I have clicked on the More Info link days ago..I believe this is malware..what do I do to get rid of this annoying pop-up? https://www.dropbox.com/s/gtm3khm6ngo0d26/Screenshot%202014-12-10%2019.56.56.png ?dl=0
jackallday wrote:
Kappy, got a page when I clicked saying it can't find the page and it looks like THIS https://www.dropbox.com/s/ldjyssatbmy53u0/Screenshot%202014-12-10%2021.28.24.png ?dl=0
Try http://support.apple.com/kb/DL1572
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2 -
I need to recover deleted data from my iPhone 4S but don't have a recent backup. I thought by pressing sync on my macbook this would back up…but I was wrong. There are no backups on my macbook and the latest backup on iCloud was Jan 2012. My mum died in May and I had lots of text messages that I wanted to keep. I really want to get them back. Is there any way at all I can get that deleted data from the phone?
Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer. As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
You can try and find 3rd party applications that might help you. I'm sure you'll pay, however.
Let this be a very important lesson learned.
Best. -
I may have totally screwed myself but...after installing Yosemite without checking for potential problems with Adobe software, my CS4 Design Premium suite wouldn't open. So after consulting some forums, I deinstalled it, but I only have disks for my old CS3. When I got the CS4 upgrade I downloaded it, back in 2011... What can I do?? Everything was fine before I upgraded that *#$%* Yosemite.
You can find the CS4 download here: https://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
Benjamin -
How do I get Acrobat XI pro on a Mac to work fully, and not just act like Acrobat Reader. i just paid and downloaded it, entered new serial number when requested, but when I open a .pdf I have no pro features showing (such as editing tools, convert to powerpoint, etc). I use XI pro on a windows PC and have no problem there.
Perfect answer. And I feel a bit dumb (should have worked it out, but still finding my way round the Mac). Many thansk for the help.
From: Test Screen Name <[email protected]>
To: John Spencer <[email protected]>
Sent: Saturday, 1 November 2014, 20:20
Subject: I installed Acrobat XI pro on a Mac but it only shows the features of acrobat reader - how do I activate the pro features?
I installed Acrobat XI pro on a Mac but it only shows the features of acrobat reader - how do I activate the pro features?
created by Test Screen Name in Acrobat Installation & Update Issues - View the full discussionYou probably still have Adobe Reader on the system. Be sure to run Acrobat instead. Use Launch Pad. Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6889718#6889718 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link. Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Why won't Business catalyst says I need to buy Creative Cloud to publish my site, but I already have
Business catalyst says I need to buy Creative Cloud to publish my site, but I already have Creative Cloud and am logged in properly.
I have checked the site and it does shows up web hosting plan. But the email on which site is published is not using CC subscription as a result BC is asking you to upgrade the site.
Please get in touch with support team and provide them subscription information :
join live chat with support team :
http://helpx.adobe.com/contact.html?product=muse&topic=downloading-ins talling-and-setting-up
Click on I still need help.
Thanks,
Sanjit -
my phone is stolen i need to get the serial number but i only have yje IMEI what should i do how can i get my serial number
Why do you need the serial number? The phone can't be tracked by either serial number or IMEI.
See this article:
http://support.apple.com/kb/HT4061 -
I need to change the country of my itunes id but I still have $0.22 in my account that I cant spend. How can I do this? Is there any way I can donate this money to allow me to change my country?
thanksYou can try contacting iTunes support via this page and ask if they can remove the balance from your account : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
I need to back my entire calendar from icloud. Now I only have montly back ups. what shall I do so i do not erase the icloud calendar?
Hey MrZuri,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides steps for archiving and backing up various content from iCloud. I have included an excerpt of how to do so for iCloud Calendar:
iCloud: Archiving or making copies of your iCloud data
http://support.apple.com/kb/HT4910
iCloud.com Calendar
This method of backing up starts with publishing a calendar that you can then download to your computer. If your calendar is already on your computer, skip to the OS X or Windows instructions.
1. Go to iCloud Calendar at icloud.com/calendar and sign in using your iCloud Apple ID and password.
2. Publicly share a calendar.
3. Select and copy the URL (web address) from that shared calendar, and paste it to the address field in your browser; do not press Enter or Return yet.
4. Change "webcal" to "http", and then press Enter.
5. An ICS file will download to your default downloads location. The calendar can be added to a calendar client like iCal on Mac or Outlook on a Windows PC.
6. Once the download completes, unpublish the shared calendar.
Thanks,
Matt M. -
Hello
I need to add more pages to my photo book but its only letting me do 78 pages, can you help me please?You posted in the Photoshop forum by mistake - and people there aren't going to be able to help you with Elements issues.
I've moved your post to the Elements forum where you are more likely to get help with Elements questions. -
My email storage show 13.3GB used but I only have about 20 emails in my inbox with no attachments. I assume it's memory cache that's clogging my phone. Do I need to backup and restore to get rid of all of it??
There is nothing wrong with the OS update.
Delete ALL your email accounts.
Restart Playbook
Put the accounts back and ensure they are all set with PUSH ON. Manual (push off) will burn battery.
Similarly delete your wifi connections and add back when required.
Turn off wifi is not connected to wifi.
Any "hunting for connection" in email or wifi will burn up battery.
Maybe you are looking for
-
My husband and I both have an iphone 4 and we share an iTunes account. I recently updated both phones to the new software and created an icloud account. I messed up though and started deleting my phone contacts off of his phone. But then realized
-
Find start/end of word contained in text.
I feel really silly asking this, but my brain doesn't seem to want to work at the moment and I can't find my old semester 1 examples. While I can easily solve this in C++ trying to do it in Java is a bit of a mystery. size_t = found, str.find() strin
-
Unable to Access the home page of oracle 10g express edition.
I have installed enterprise manager 10g and also express edition 10g .But after installing the enterprise manager 10g and trying to access the url http://127.0.0.1:8080/apex .The xdb username and password is prompted.I deleted the entry in init.ora f
-
Hi all I am capturing HDV through the HDMI on a black magic intensity card using ProRes HQ which captures fine. My problem is when I monitor the playback of the captured clips on a HD TV the playback looks like it has a real problem with jaggies. I h
-
After installing most recent update my yahoo toolbar doesn't display how do I remove the update for now?