I NEED TO INSTALL THE DRIVERS IN MY TOSHIBA CANVIO EXT HD 1.5TB USB 3.0

I WAS TRYING TO MAKE A CLONE FROM MY HP LAPTOPS SAMSUNG HD TO THE NEW TOSHIBA HD, MY BUT INSTEAD THE PROCESS FAIL . BUT IT DID SUCCEED IN MESSING UP MY DAY INSTEAD. IT DELETED EVERY THING ON THE NEW DRIVE. SO CAN SOMEONE PLEASE TELL HOW TO REPARTITION THE DRIVE ALSO INSTALL THE DRIVERS TO IT . NOW I HAVE THE WINDOWS 8 SOFTWARE.BUT I NEED TO PLACE A LETTER ON THE DRIVE BEFORE I CAN SEND THE WINDOWS 8 SOFTWARE TO IT, I SEEM TO FORGOTTEN HOW TO DO THAT . I WAS PLANNING TO REMOVE THE HAD OUT OF ITS CASE AND MOUNT IT INTO THE LAPTOP, WOULD I STILL NEED THE UTILITIES & DRIVERS FOR THE TOSHIBA? OR WOULD I SET A LETTER TO THE DRIVE AN PLACE THE WINDOWS 8 DISC IN THE DVD DRIVE AND INSTALL WINDOWS 8 THAT WAY? I COULD SURE USE SOME ADVICE FROM A GOOD TECH. I REALLY DO APPRECIATE ANY HELP ANYBODY CANE GIVE ME. THANKS! [email protected]

Similar Messages

Do I need to install the drivers on my old Mac Pro disc or from my Snow Leopard disc?

Hi,
I've got a 2008 Mac Pro (dual quad @ 3GHz) w/ 24GB RAM and I've got Windows 7 Ultimate 64-bit installed. What do I need to install?
On my newer 2009 iMac (which included Mac OS X 10.6) I just inserted that disc specific to the iMac and installed the drivers, but the disc for my Mac Pro is old (10.5.2) do I need to install the drivers on it or not? Can I just insert my Snow Leopard 10.6 disc to install Boot Camp etc., or won't that include drivers for the Mac Pro? The Mac Pro is running Snow Leopard 10.6.8.
Thanks.

Thanks for your reply,
I have both the silver discs specific to my iMac and Mac Pro models that you receive with your Mac, and a general copy of Snow Leopard that you buy from the store.
I used the silver disc that is specific for my iMac to install the drivers, and Boot Camp 3.0 on my iMac. But with the Mac Pro, the software is older and only has Boot Camp 2.0, thus I'm wondering if I can simply use the software on the general copy of Snow Leopard I own, or does the silver disc contain specific drivers for my Mac Pro that I need?
I'm under perhaps the wrong impression that the silver discs that you get with your Mac purchase contain drivers for your specific Mac model which you can't get from the general Snow Leopard disc.
Thanks.

I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows. I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC or not?

I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows. I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC and finalizing the Windows 7 installation (for the 1st time) or not?
I am worried that may lose my information... Appreciate any feedback! Note: already half-way in the process of installing!

Yes, IF you picked the right partition, as in the Boot Camp partition. If everything is done right you should be able to boot into the Mac side.
If you already booted into Windows and are at the point of installing the Boot Camp Drivers your already done installing Windows! Yea! All you need to do is just install the drivers and everything should work normal.
The Windows partition and the Mac partition are seen as two different HD's now as far as the computer knows.
You can use the Boot Camp control panel in Windows to boot into the Mac side and the Startup Disk in System Preferences on the Mac to switch to Windows. If you can't then press and hold down the Option key untill you get the boot screen.

HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..

Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only

I installed bootcamp 4.0 4033, installed window 32 bit but can't install the drivers for some reason i keep getting error message. i have a macbook pro mid 2011 version. Please help

I installed bootcamp 4.0 4033 so that I can install windows 7 32 bit on my mac. Everything works fine until I try to install the drivers and I get an error message stating the version of windows does not work with the drivers I am trying to install. I have a feeling somehow I am downloading 64 bit drivers when I need 32 bit. I spoke to Apple and they said I can't use 32 bit windows.. but that is not what the support site says (it says I can as long as I use bootcamp 4, not 5). Also, my bootcamp assistant is version 5.. I have no idea if that matters. Help please.. been searching online for hours.

What model/year is your Macbook Pro? What operating system version?

In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

in which boot camp support software I can install the drivers for win 7 32 bit.
my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
also my macbook pro model is MC723.

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

Windows Update installed the drivers for the wrong sound card?

I need serious help with this one.
It all started October 31st when I find that Windows Update lists an update for my sound card - a Sound Blaster Li've! 24bit internal card. I install it, reboot, and realize that my sound is not coming through the speakers (Note, sound was working before I installed this update. I'm not even sure if the sound card is processing to it). I realized that Windows Update seemed to have installed the drivers for the wrong sound card. It installed drivers for "SB Audigy" (it was originally SB Li've!), why they chose to be so generic - I don't know. I later find out that not even Creative's website has this updated driver, but apparently, only Windows Update is issuing this out.
But wait, it gets even more frustrating.
So I don't have System Restore enabled (big resource hog), and I need to go back to the older drivers. I originally do a driver rollback using the Device Manager, which made the drivers go back to what they were before - but still wasn't outputting sound. I think even though the older drivers were being used by Windows, the software that Creative issued wasn't picking up this fact and thought I still using the newer ones for Audigy. So I decided to uninstall everything and start with an actual driver installation executable from Creative's website (SB24_PCDRV_LB__04_0090.exe). What I found out was that if new drivers are detected, I can't actually install over them.
However, if I uninstall the drivers using the Device Manager, it'll automatically install everything - the control panel, the preferences, drivers, etc for the new "SB Audigy" drivers that were issued Oct 3st once I scan for hardware changes. The reason I need to scan for hardware changes is because if I uninstall the drivers from the Device Manager, it'll remove the instance of "SB Audigy" from the list. This causes problems for the installer for the older drivers (SB24_PCDRV_LB__04_0090.exe) because now it thinks there isn't any hardware to install the drivers for (all because I haven't made the Device Manager actually discover my actual sound card, yet unless I press "Scan for Hardware changes" which as a result, will install the newer drivers from Oct 3st automatically. I hope this makes sense so far).
So now I can't uninstall the newer incorrect drivers so I can install the older ones for the actual sound card. Normally I heard that you can change something in the new driver's installation executable to properly uninstall everything. Only problem is, Windows Update doesn't exactly tell you where it's downloading the driver/hardware installation files. I know in the Software Distribution you can find Windows Update stuff downloading there - but I couldn't find the SB Audigy driver update it keeps installing while "scanning for hardware changes" in the Device Manager.
This was incredibly hard to put into detail, so I hope that it makes a little bit of sense. If you need clarification on anything please let me know and I'll do anything to help eliminate the problem. Just remember I have:
Windows 7 x64
Sound Blaster Li've! 24bit
I think the only problem I'd like to solve is - how could I install older drivers if Windows keeps installing the newer ones even after I uninstall them? Because right now, I can't do much unless I know how to get rid of the installation files for the Oct 3st update so it won't have anything to use. Another way to rephrase the question is, how could I get the Device Manager in Windows to display my soundcard as "Multimedia Audio Controller" for as long as I need so I can run SB24_PCDRV_LB__04_0090.exe which will then detect that there is a sound card that can use the drivers and install them properly?
Thanks for your help guys, I hope we can solve this. Because I've done everything I could. Hopefully I don't need to reinstall the operating system just so I can have sound working.

Click on Start> ALL Programs > Creative > Creative Audio Console.
Make sure speakers are set to 5. if that's what you're using. I like to Synchronize with Windows Control Panel. Turn EAX to No effects, and/or turn effects to 0%. On the CMSS 3D Tab, turn the Mode to OFF.

Should i need to install JDBC Drivers?

Hi,
I am new to primavera database.
Now i need to develop RFC's to JDBC Scenario using PI7.1, should i need to install JDBC Driver to up date the data in primavera database.
thanks,
snr.

Hi,
JDBC drivers are needed to establish the connection to database using JDBC adater but not operations...
if your database provider classes are not installed in the PI system then you need to install the same...
check the connection using test if not sure about this but need to install the ear file provided as per note 1085539
HTH
Rajesh

P6-2016 New MoBo but I need to install AHCI drivers for it to work

Hey I just got a new motherboard for a haswell processor and some new ram. The thing that I'm having trouble with is if I try to boot with the new Motherboard CPU and Ram I will get a 0x7 boot error which means that the boot drive isn't being detcted, after hours and hours of forum searching and my own troubleshooting it seems I need to install the AHCI drivers onto the HDD because HP doesn't install them when they ship the systems because thats not what mode Your computers boot in (so I've seen), but that just so happens to be the mode that my new board boots with, and well without those drivers, I'm sure you can figure it out. So here's what I did next I went onto the intel website and got their AHCI drivers but if I try to install them then it will say that my system does not meet the mnimum requirements to install the software. And well without those drivers.... I've just got $400 of new PC parts just laying on my desk.
P.S. I heard you guys will offer a free win 7 copy if I give you a product key or something like that but a clean install is the LAST THING I WANT TO DO!

HI wizardofozz:
Thank you for your inquiry.
To be able to assist you I need some additional details.
What model P6 do you have?
What OS are you running?
What was the complete error message?
What motherboard did you purchase.
What Haswell processor did you install?
What ram did you install?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

HT3986 What I can do to install the drivers like WFi, speaker ... While I haven't the Mac mini CD?

What I can do to install the drivers like WFi, speaker ... While I haven't the Mac mini CD?

Kmasry wrote:
What I can do to install the drivers like WFi, speaker ... While I haven't the Mac mini CD?
Best thing is to read the instructions before you start actually, but now you need to go back to OSX, start Boot Camp Assistant again and perform the first task on the list, download the Windows Support Software, then go back to Windows and install it. You'll need a thumb drive or a blank DVD to store the drivers on.

Problem with installing the drivers from cd-rom CTREG

I have the following problems.
st.. this one is the most urgent.. the problem is I can't seem to install from a drivers cd.. the error I get is like CTREGSVR.. it says it cannot find differnt applications on dri've c... there is like a whole bunch and in the end you just keep clicking ok ok ok until it continues to install. the drivers intll fine but none of the appliations seem to work. the funny thing is with the message is that its looking for someing like c:\program files\creative\sbzs2\then differnt dll and stuff and it says it cannot be found..
the other problem I have is that once in a blue moon the mixer will not work and the only way to get it work is to pretty much go through the painful installin/re-intallation of the whole thing because nothing seems to work. It says the sounds blaster card could not be found...
anyways if you guys could just help me out with the st prob. that would be great.
thanks.

Hi.. someone help me out please.. this is the screen I always get
click on the link http://home.comcast.net/~alphaext/problem.jpg

To open "CS5ServiceManager" you need to install the legacy Java SE 6 runtime.

Recently updated to OSX Yosemite. Now every time I turn the computer on I get this message.
To open "CS5ServiceManager" you need to install the legacy Java SE 6 runtime.
I don't know what CS5ServiceManager is. And when I click on the "More Info" button, I am redirected to a blank screen. So I'm confused and a little worried. Is it necessary to install Java SE 6 runtime? If so, I think I can find the instructions on how to do it, but I'd like to know if (1) it is safe to do so and (2) if it's necessary.

Here it is: Apple Java 2014-001. Quite safe to install. Only necessary if you are using Adobe's CS5 suite.

When I try and open adobe illustrator I get a pop up message saying "To open "Adobe Illustrator CS6" you need to install the legacy Java SE 6 runtime."

When I try and open adobe illustrator I get a pop up message saying "To open “Adobe Illustrator CS6” you need to install the legacy Java SE 6 runtime." it also says "Click “More Info…” to visit the legacy Java SE 6 download website." When i click more info it transfers me to an apple page which never loads, its just a blank page. I downloaded Java SE 6 like it says it needs but it did nothing. All of my other Adobe programs such as bridge, dreamweaver, lightroom, Photoshop, indesign, and flash all work except for illustrator. What can I do to fix this?

Go to Apple and look for the Java for OSX 2014-001 link. Download from there and install it.

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped

Welcome to Apple Support Communities
You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers

Using bootcamp 5.1, Windows 7 home is installed but missed installing the drivers disk. How to install the Mac drivers for windows after the fact.

While using Bootcamp 5.1, and OS X 10.8.2, I partitioned my Mac disk with 80 Gigs for Windows 7 home and the install went great, but I must have missed the time when I was to install the Mac drivers disk to install the drivers for Windows,(when in Windows I don't have a mouse or optical drive.) Is there a way to install the drivers after Windows is installed, or do I have to go through the whole process all over again?

Press X key after the startup sound to boot into OS X. Then, open Boot Camp Assistant, download Boot Camp drivers and burn them into a USB drive or DVD. Finally, boot in Windows and install drivers

I NEED TO INSTALL THE DRIVERS IN MY TOSHIBA CANVIO EXT HD 1.5TB USB 3.0

Similar Messages

Maybe you are looking for