I need to know how to make a game !!!!!

I am 12 years old and i need to know how to make a game... i'm very good with computers and i just need to know how to make a game.. like runescape.

you should start with something little, first try do make a rectangle on screen, then try to make it move.
if you're past that, then you're allmost there.
of course, eventually during making a game like runescape you would need lot's of knowledge about data structures and matm and physics and whatever is also needed in order to cread 3D universe.
but with little practice you get to be master.
good luck.

Similar Messages

  • I have garageband 11 and need to know how to make a good deep bass drum that thumps for a rap type song - thanks

    I have garageband 11 and need to know how to make a good deep bass drum that thumps for a rap type song - thanks
    just getting started so I would appreciate some assistance
    Mike

    Quit Mail. Force quit if necessary.
    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Mail/V2/MailData
    Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens by pressing command-V, then press return.
    A folder window will open. Inside it there should be files with names as follows:
              Envelope Index
              ExternalUpdates.storedata
    Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
    Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
    Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

  • I accidently "hide" some of my purchased apps in the app store and need to know how to make them visible again.

    I accidently "hide" some of my purchased apps in the app store and need to know how to make them visible again.

    Mac App Store- Hiding and unhiding purchases

  • Dose any one know how to make a game simular to runescape?

    what i am talking about is i want to make a agme for my website.
    i want it to be a mulity user game where charators can interact with another. So dose anyone have any videos i can whats like a tortorial to make one or any info.
    Thank you for ur help.

    I dont know how to make a game like runescape, but to be quite honest it was runescape that got me starting. In april last year I toke the Java tutorial with the aim to create an online multiplayer role playing game. When I was done with the tutorial I posted some messages i gamecreation forums around to try and find a designer to work with. Around august last year I found him and we had a conversation about how to do it. He told me about opengl, animation techniques and alot of other stuff that day. Stuff I didnt understod the first thing about. But he told me to read up on it since it was good stuff to know if you want to make a good game.
    I toke some tutorials at NeHe's openGL site. They are not the best I have seen but they taught me the basics. after that I did something cracy. I tried to find out how to make skeletal animation work so we could use my designers skeletal animated 3d models. I wrote a parser and 3 month later I understod and implemented skeletalanimation into the engine. Btw. I use something called JOGL to access OpenGL from Java. Next step was to implement tweening, kamera and thats where I am now.
    I toke a loan im my appartment to give me untill feb. 2007 to finish something and Im working everyday on this project. Good thing is that my designer is just as devouted and has also made arrangements so he doesnt have to work for a while. Now he can use all his time rigging, animating and making textures for characters, monsters, the world and so on.
    Its looking good so far and I havent lost my motivation and lust yet, but there is a long way to a finished game.
    I still have to learn about collision detection, culling, octrees, networking and a billion other issues but I enjoy leaning and working with it.
    When thats done there will be gameplay, AI, a balanced economy system and so on to develope.
    Its a long journey, but if all this dont hit you in the stomach and if you think you have the mental stamina for it, I would say go for it. If you succeed, good for you. If not, you gave it a shot!
    Good luck!

  • Dear experts.I want to know how to make XO game versuses undefeatab​le program using labview "extra free Kudos" for all.

    Dear masters in labview :I want to know how to add to XO game in labview a feature where a single player plays against  any programed program and never wins.
    Free Kudos for anyone who is able to solve this problem.
    Thank you for your time.
    Best regards,
    Jupiter
    extinct when hell froze over

    jcarmody wrote:
    I'd also like to join in the OP's offer of free kudos to anyone that can write a tic-tac-toe game that can consistently beat me.
    Now that's suddenly an entirely different requirement!
    "user never wins" != "program can beat user"
    Since the perfect game is a draw, "user never wins" is actually possible, but it can never beat a perfect player.
    LabVIEW Champion . Do more with less code and in less time .

  • I need to know how to make a copy of my contacts from my iphone to my PC?

    I cannot get my contacts to appear on my PC so I can make a copy.I am due to recive a new company phone today and I do not want to lose my contacts.I am unsure of what type phone my next one will be.But I do know that I will be with Verizon Wireless.Is there a way to get my contacts over to the new phone even though it is with Verizon.If not I need to copy them as not to lose them.i am giving my iPhone to my son and staying with AT&T as well as having my company phone.Any help will be much appreciated...
    Thanks,
    Tbone
    4/7/10

    Haven't you been regularly syncing your phone with iTunes. If so, your contacts should already be on your computer in Outlook.
    If you have not done this, you will need to create a dummy contact in Outlook and then sync the phone so the two contact lists will be merged.

  • I just need to know how to make a multi page document from scans!  :(

    I have 4 scanned, pre-cropped pages from a recent graduation ceremony ready to go.  Acobat will let me scan them in but makes them 4 separate PDF documents.  Once I go into any of those I can see no way to add pages or combine the 4 PDFs into one big four page PDF.  I searched these forums... but all the questions I have found have been from more experienced users asking more advanced questions.
    Sorry to ask such a beginner question here. 

    Well actually my adobe reader gave me the option File>Create Adobe PDF Using Acrobat.com but the website doesn't seem to allow for anything other than the most basic PDF construction/conversion unless you upgrade to Acrobat.com Premium.  It will be cheaper in the long run for me to just buy the standalone version of Acrobat since I don't need the features like Shared Workspace, etc.  But yeah, I follwed a link from reader and that's how I got this far. 

  • Is there someone out here that can help me with an Adobe CC question. I need to know how to make the program text larger? it is way to small.

    I need help with making the font size in the Adobe software bigger. I don't know who to do this and it is very tiny

    Sweet!  Finally another Dead Head!!!
    The short answer is have your friend burn those tracks to CDs and then import them into your iTunes library.
    For lllaass:  Its obvious you have never been to a Dead show, so we'll cut you some slack.  The tracks in question were never purchased, they were taped live during the show.  The Greatful Dead has always reserved "front row center" for a group affectionately called "tapers," because they always came prepared to record each show, and owing to the fact that no two shows were the same, some of those tapes are one of a kind.....  I have taped shows myself, namely the shows at RFK Stadium in DC, and the Coliseum in Charlotte NC.

  • When searching a topic firefox no longer greys-out or indicates which sites I have looked at and I need to know how to make this happen

    Using Yahoo I search a subject. When the sites come up after I look at each one, the color of the print doesn't change to show that I have looked at a particular site. What do I need to do to make this show in the change of the print color?

    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    -> click '''Firefox''' button and click '''Options''' -> Content panel ->
    Under '''Fonts & Colors''', click the '''Advanced...''' button -> place Checkmark on '''Allow pages to choose their own fonts, instead of my selections above''' -> click OK to close the Fonts window -> click OK to close the Options window -> Restart Firefox (click '''Firefox''' button and click '''Exit''')
    Check and tell if its working.

  • ** I NEED HELP!!.. I NEED TO KNOW HOW TO MAKE A  2NDROBOT FOLLOW MY RCBOT**

    Im in a bit of a jiffy.. i need help trying to get a second robot to follow my custom RCBot.
    Anything would be helpful.. Thanks.

    luva_bwoi wrote:
    Okay sorry guys, im new to this thing..
    Here's the problem. Im in a Gr.11 Computer Science class and we're doing exercises on programs. One of the prgrams is to construct a custom RCBot that a user could control, which i did. The second task was to create a second 'Smart Robot' that would follow the RCBot as if Chasing him in a game like PacMan or something.
    We are using becker.robots and were instructed to use a loop in order to figure this out. In my case i have no clue how to do this but believe it has something to with the RCBots location (street, avenue). Hope this gives a better understanding of what im trying to do. ThanksYou're in the wrong place: this forum is meant for questions about the standard Java classes (your robot classes are not a part of it).
    Ask your teacher or find a forum dedicated to this Becker-Robots application.

  • I need to know how to make my surface and printer sync

    Can anyone help me fix my office jet 4620 print to my windows 8 surface?

    Hi,
    Please check the following post:
       http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/How-Can-I-Print-from...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • When i try to stop iTunes program, it restarts automatically. need to know how to make it stop.

    how do i make the program stop running on desktop? it restarts automatically after i exit.

    If the computer's running Mac OS X 10.5.8 and has a PowerPC CPU, that's not possible.
    If the computer's running Mac OS X 10.5.8 and has an Intel CPU, buy a Mac OS X 10.6 DVD from the online Apple Store.
    If the computer's running Mac OS X 10.6 or newer, run Software Update twice.
    (92510)

  • SECAM help, need to know how to make a secam project

    I Need to make a DVD that can be played in France.  I understand that the standard in France is SECAM.  I can't find a preset when making a project for SECAM or info on the web about what resolution to make if I were to create a custom preset.
    Any help would be great. Thanks

    Jim Simon wrote:
    As a general rule, you edit in a project that matches your media properties.  If your final delivery needs to be different, you do that during or after export.
    This is true.  I have shot in NTSC and had to send a PAL version of the final video over to Europe, so I edited in NTSC and converted it to PAL in Encore.  Worked fine, from what the client told me, although I never got to see the final PAL version since we don't have a PAL compatible DVD player in the office.  So I couldn't tell you if there were any problems I may have noticed that the client might have shrugged off (like field-dominance problems).

  • How do I set it up to remember my passwords on certain sites if I said no by accident? the tab only allows me to adjust the ones saved. I need to know how to make them if I didn't do so the first time

    I accidently did not save the passwords to some sites I would like to have the password remembered. I went in to try to maybe reset it so that the pop up window would come up again. but it won't let me do it again. How do I get the password to be remembered so I can stay logged in to the specific sites I want to be. I sure hope that made sense.
    Thanks for your help
    Christina

    Also, please try deleting the sites in '''Tools''' ('''Alt''' + '''T''') > '''Options''' > '''Security''' > '''Exceptions...''' (under '''Passwords'''). The sites listed there are those for which Firefox will never remember passwords.
    Useful links:
    [https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
    [http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    [https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
    [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
    [https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing video in Firefox without a plugin]
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
    [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
    [https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://kb.mozillazine.org/Testing_plugins Testing Plugins]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]

  • B&W wedding picture and need to know how to make only the flowers in color. TY

    I have seen B&W pictures with a splash of color in them, I would love to learn how to do this?

    This tutorial shows you how to do it..
    http://www.youtube.com/watch?v=4-Mi0LhRCUM.

Maybe you are looking for

  • 11gR2 RAC installation in AIX fails while running root.sh on node2

    Hi We are in the process on installing 11gR2 RAC on AIX 6.1 But the installation is failing on node 2while running root.sh with the following error. DiskGroup DATA creation failed with the following message: ORA-15018: diskgroup cannot be created ORA

  • HT201263 My iPod wont turn on? Help!!!

    I hold down the Sleep/Wake button and the apple logo pops up. Ok thats normal. But not even a few seconds later, this symbol pops up. (The symbol is a USB connecter with an arrow pointing to the iTunes logo. So i plug it into iTunes and this is what

  • Gathering Statistics in 10.7 NCA with 8i Database

    In preparation for the 11i upgrade we are first migrating our database to 8i (strongly recommended Category 1 pre-upgrade step 5). I have contacted Oracle Support on whether it is recommended to gather statistics in a 10.7 NCA environment (optimizer_

  • Cast and Concat functions error

    Hi I am getting below errors while doing cast and concat The error message is nQSError: 22020] Function Concat does not support non-text types. and my concat code is CAST (cast(day(current_date) as char)||'-'||month(current_date)||'-'||cast(year(Core

  • SAP HR: How to prevent delimiting of records when setting a lock

    Hi All, I am part of a SAP HR implementation. In one of the Infotypes, I am copying a record and setting a lock in the new record by going to the menu Edit-->Lock/Unlock. This should ideally lock the record without touching the previous record. But i