I need to know if any body is using this hard disk with leoardandtimemachin

Hi i need to know if any body has tried to use this hard drive with time machine and leopard and if any body has have any problems using it with these applications the external hard drive is:
Lacie brick lego hard drive, usb 2 high speed, 7500rmp refrence, 301150U from 2006 thanks

I am not using that drive, but I would recommend a FireWire drive (FireWire 800 if available), for better speed and reliability.

Similar Messages

Has any body tried using canon printer driver with Mac OS X v10.7. I just bought a new printer only finding out that I cannot use it. Any suggestions. Thanks

I just bought a canon pixma iX6540 printer only to find out that the driver is not supported. I am using Mac OS X v10.7. Can someone help please. Thanks

Although it mentions OS 10.6 on the link, have you tried downloading the latest drivers - if you haven't already - from the Apple Support site, maybe they'll work:
http://support.apple.com/kb/DL899

Can any body please read this and ans me

hi all,
can any body please read this and tell is there any function module or some other thing is available.
Material masters are location specific, and Progistix maintains part details in Canadian $, now we need to get the logic how SAP converts the standard cost of the material from Canadian $ to US $
The plant number of Canada is 3002.

Hi
you would have to use the following function modules
CONVERT_TO_LOCAL_CURRENCY
CONVERT_TO_FOREIGN_CURRENCY
regards
Dinesh

Hello guys..does anybody know how to install and use adobe master collection with the new lion? I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem... I am a new mac users and I'd like t

Hello guys..does anybody know how to install and use adobe master collection with the new lion?
I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

Lab79 wrote:
Are you on Apple's payroll?
well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
good luck with apple dude..
Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
<The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
Great suggestion. You should go with that one, but good luck getting a refund.
Bye

HT1212 My device is disabled and I can't open/unlock it to trust the computer so I need to know how do I get around this problem please.

My device is disabled and I can't open/unlock it to trust the computer so I need to know how do I get around this problem please. I don't mind restoring it updating anything that will work

Follow the instructions in the support document that you linked to the forum with. See the section about not syncing. You will probably need to erase it in iCloud to be able to restore it as new. Remove the device from your iCloud account which will disable Find My iPhone.

I need to know how to put a photo in a box with text under photo, so they all will move in page

I need to know how to put a photo in a box with text under it, so they move together in a page of text.

The Acrobat SDK might be a starting point.
From there, perhaps a plug-in (built with C+).
Perhaps with a licensed release of a PDF Library (this could be $$).
The viable and cost effective alternative is use the tried and true.
Authoring in an appropriate authoring application with appropriate tag management.
Example: Adobe InDesign; Adobe FrameMaker or MS Word with PDFMaker (comes with install of Acrobat).
This way you place "Alternative Text" when mastering content in the authoring file.
Going the route and with some look-see (research) you may find programmatic approaches to placing the alt txt in the authoring file.
Note: as discussed in the Matterhorn Protocols there is no programmatic method that provides a fully accessible PDF (specifically, that is an ISO 14289-1, PDF/UA-1 compliant PDF).
Regardless, here you have a sub-forum for discussions on Acrobat usage.
Consequently discussions on/of 3rd party software is rather out of scope eh.
Be well...

Hi any body having configuration material on Generic with holding tax

Hi SAP Guru's
Any body having configuration material on Generic with holding tax
Please help me on this because presently i am working UK porject when i am executing transaction code S_P00_07000134 getting no list genarated
Please give me some inputs
Regards,
satya

Hello abhijeeth,
Sent!! chk u r mail for the notes.
Regrads,
shashikanth,
Asssign points for usefull answer.

My ipod nano gen 4 is stolen! He is my first love with ipod. Can I lock this device by use serial number of the device? I don't want any bad guys use or do anything with my love one. Please let me know if have the way to do thanks.

My ipod nano gen 4 is stolen! He is my first love with ipod. Can I lock this device by use serial number of the device? I don't want any bad guys use or do anything with my love one. Please let me know if have the way to do thanks.

zenith_nm wrote:
My ipod nano gen 4 is stolen! He is my first love with ipod. Can I lock this device by use serial number of the device? I don't want any bad guys use or do anything with my love one. Please let me know if have the way to do thanks.
Nope!
http://support.apple.com/kb/HT2526 How to report lost or stolen Apple product

I need to know what Adobe version to use for my iPad to fill in and pay forms online

I need to know what Adobe version to use for my iPad to fill in and pay bills online

In the App Store search for Adobe Reader.

After updating to 8.3 so many apps dont work properly. Any body else got this?

After updating to 8.3 so many apps dont work properly. Any body else got this?

This is truthfully a WAG but here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

Any body real use Lync client +XP+ZCM without MS client ?

Any body real use Lync client on the WS: XP_sp3+NWclient+ZCM10.3.4 (without MS Client for Microsoft network) ??
Problem:
- Power On
- Systep UP
- User Enter username/password in to the NW Login
- Login OK, NW Login Script OK
- Windows DESKTOP Up,- At this moment client Lync is launched ....
- User Enter Username and pasword for connect to the LYNC, press Enter...
and - Authentificatioт false...
- User Launch again Client Lync, Enter again username/password and only after this - log in to the Lync OK..
Problem - at the first connection always a problem also it is necessary to launch the second time client Lync
Any suggestions, please.
Serg

skoltogyan,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

I would like to know if is possible to use the old iSight with my powerbook (mid 2009)?

I would like to know if is possible to use the old iSight with the macbook pro (mid 2009)?

Hi,
If the Mac has Firewire then you can use the External iSight
(Other readers
If you have Firewire 800 then you will need an adapter to use the Firewire 400 camera - Search for the word Adpater and see posts by EZ Jim for more details)
Don't daisy-chain the camera with Hard Drives
The camera only uses a data rate of 200Mbps and the differences in Hard Drive data speeds can be an issue.
The External iSIght should work no matter what Firmware is on there currently.
There is some evidence that having the 1.0.3 version (Open the System Profiler > Hardware > Firewire) on the device makes it more compatible/useable in later OS versions
The Updater is included in Tiger and Leopard.
Hard Drive/System/Library/CoreServices/iSight Updater/iSight Updater.app
An OS Update could "trigger" this to be run if you have Tiger
It can also be run as a Standalone.
It is Not present in Snow Leopard and although the documentation says this Firmware is an Audio update some people report that the camera needs the 1.0.3 Firmware to run.
(that could simply be the "Flashing" the Memory involved resets it enough to work)
10:22 PM Wednesday; June 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I have a MacBook Pro version 10.7.5 Every time I try to open iphoto I get the warning: "To open your library with this version of iPhoto, it first needs to be prepared. You have opened this photo library with a newer version of iPhoto." How do I do this?

I have a MacBook Pro version 10.7.5 Every time I try to open iphoto I get the warning: "To open your library with this version of iPhoto, it first needs to be prepared. You have opened this photo library with a newer version of iPhoto." How do I do this? I recently bought aperature, and it has been since then that I get this warning.
Thank you!

No I have not tried those things. I don't even know what that means I suppose I have the newest version of aperature; I just bought it 4 days ago.

I want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged

i want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged
pls give braef intro about all this things, i have searched on sites but i am not getting exact thing and meaning pls help
and i wnat to complete hardware exam of mac what should i do
thanks
vicckey

GSX, if you're referring to Apple's service by that name, is available only to employees of Apple-authorized service providers or self-servicing accounts. Unless you are employed by such an organization, you cannot access GSX. If you are employed by such an organization, they should set you up and give you the appropriate login information.
If you are interested in becoming a certified Apple hardware technician, you can find information here:
http://training.apple.com/certification/acmt
Please note, though, that certification does not in and of itself give you access to any of the Apple resouces for support organizations; diagnostic tools, parts ordering, etc. You again must be employed by an authorized Apple support provider before you can gain such access.
I have no idea what "knowlaged" might be.
Regards.

I had a problem with the hard disk on a 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB and when I tried to erase and format It fails with input/output error. Any help much appreciated!

I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!

Zap the PRAM and Reset the SMC, then try again.

I need to know if any body is using this hard disk with leoardandtimemachin

Similar Messages

Maybe you are looking for