I need to know if I have to make a new icloud account so I can get my Facebook working. Also I have delete all of my other Facebook account where I have been having trouble.
please help me set up a new facebook account. I can't use any of my others ones. I believe I had a hacker getting into my. Account
Need help ASAP with my Facebook acoount
Theresa
I have asked our gracious Hosts to move your post from the Keynote forum to the iPad forum. I am still not sure what your difficulty is but I am pretty sure your problem started with iOS 8x - is that right?
So let me ask a few questions that may help other iPad App users help you...
Quoted from Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 8.0.3" or "iOS Mail 8x".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
From ChitlinsCC: "Keep It Short and Simple" - Take your time...
I will prompt you to come back to this post in the other thread
best luck
CCC
Similar Messages
-
I'm getting so tired of this.
Any ideas on what to do ?You won't be able to change your rescue email address until you can answer 2 of your questions, you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
Please Help
What type of "account" are you referring to? An iCloud account doesn't contain music, an iTunes account does.
-
I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .
Connect the device to iTunes and restore from the most current backup.
If the issue continues, restore as new. -
I have been having trouble getting my email on my iPad2.
It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it.
I can send emails, but can't get them.
Any ideas, people?Hi Kharels
Just posted this reply to 2 others with same sort of question:
I have the same issue as i have my own email address and only want to use.
There are two ways around this annoying problem. The first is to set up your own domain email account alongside your iCloud one, and when you go to send each email tap on From and you get a choice of emails addresses to reply from... ie your own domain or the iCloud one. This is tedious though.
The other is to set up your iCloud email as normal, then create a new one altogether. Choose 'Other' when creating this new account. Then put for the incoming server mail.me.com, along with your user name and password. For the outgoing server put the server you want to use - ie your own domain one. This is therefore a hybrid account and does work.
Now switch off the email for iCloud (leaving on Calendar, Address Book etc). Switch on the email for your hybrid account (which of course is iCloud incoming as well).
Providing you have directed your own domain email address to your me.com one, you will find the iPhone should behave itself and you can use the folders etc and these will synch with your Mac ok.
Hope this work for you - let us know.
Simon -
Since downloading iOS 7, I have been having trouble purchasing music from iTunes Store. When ever I try to make a purchase I always get the message "Your account is not valid in the US store" As I am new at this I don't know what I can do to remove this problem.
What country are you in ? If you aren't in the US and the address on your account isn't in the US then try going to the bottom of the Featured tab in the App Store app on your iPad and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select your country.
-
I have a Lucid 2 LG. I have been having trouble with insuffient storage. I have a 8G phone and have spent hours with Tier 2 tech trying to move info from the internal storage to the SD card with no luck, When I go to storage in the settings it states that over 4 gigs is for Misc? System data takes up over 4 gigs. No one can tell me what system data consist of. So My question is does anyone know what system data is? I am assuming I have a 8 gigphone but can only use 4 gigs???
System data is the OS or operating system. That is where the recovery stays separated from the rest of the storage so that it doesn't get corrupted. It is not accessible and non-movable.
-
Has anyone else been having trouble with safari ever since the update? I have restarted several times, it still doesn't work.
Greetings Blueleoapple,
After reading your post, it sounds like you are experiencing an error with Safari. You may want to consider resetting your device, which is different from restarting. This article provides detailed instructions for Restarting, and Reseting:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
How to restart
Press and hold the Sleep/Wake button until the red slider appears.
Drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D -
I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.
What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
A1409 Gen 4.. The new AC is A1470
How is it setup?
I need the whole network setup. what modem/router, how is the TC connected etc??
I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in. -
I have been having trouble burning a DVD.
I have been having trouble burning a DVD. It goes through all the steps until it gets to the multiplexing "burn" step and then with 3 minutes left the disk pops out. The disk is left empty and an error comes up. I have been able to burn DVD's before, so this is frustrating.
Well - not correct answer as I understands it - This is a very complex question. In my case I'de put a button just touching the TV-Safe area boarder. Moving it a minute inside and the Error disappeared.
BUT - there are so many other things that I collected a long long list on this - read and see if You find help here.
Multiplexing Error
PART One.
Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio = .aiff (as on audio-CDs) (else coverted to this .aff 48KHz)
Chapters !
A. Using strange letters in video project name eg +,/; etc. keep to a-z and 0-9 strange letters in project name eg +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly eg x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutly needed.
eg external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing widescreen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the uneditited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
*One user more writes*
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous trys, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no mulitplex error
As a final experiment, I moved "bad" chapter mark about 5-10 secs beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplexer Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Yours Bengt W -
i have been having trouble my iphone 3gs doesn't work the slide to unlock is broken i have tired everything to get it open but it won't work please help me!
Basic troubleshooting steps are: Restart, Reset, Restore,
-
I can't move downloads onto my desktop nor can I move folders around desktop. Have been having trouble with iPhoto also. "Terminal" has shown up on my dock for the first time. I tried repairing using disk utilities.Please Help!
I have the same issue-was there ever a solution that worked? Thanks.
-
I have been having trouble installing Creative Cloud, which I have purchased.
I have been having trouble installing Creative Cloud, which I have purchased.
ok:
"Notoriously server-Can not log in right now., We can not access your
account., Try again later"
2013/12/3 Mylenium <[email protected]>
Re: I have been having trouble installing Creative Cloud, which I
have purchased. created by Mylenium<http://forums.adobe.com/people/Mylenium>in *Photoshop
General Discussion* - View the full discussion<http://forums.adobe.com/message/5896778#5896778 -
i've been having trouble transferring my rented movies to my iPad. It keeps showing up as already transferred to another device, although i've only been trying to transfer to the one ipad that i have
I know of no solution except for restorng the iPod to factory defaults/new iPod. Have you made a suggstion to Apple to all resetting email autofill?
Apple - iPod touch - Feedback -
I have installed Proloquo2Go and need to know if everything I put into a new folder in this app will be saved automatically or how do I do this and not lose photos and folders?
Hello dancetoday07,
Let's see if we can square this away for you. With backing up your iPhone, it will back everything you have using iTunes and if you use iCloud, by default, backs up everything. After you have made a backup you can restore that to put the contents of the backup on your replacement iPhone. If you want to put certain things back on, you will at least need to export the content to your computer, like your photos and videos. If you only want to put certain things back on, then you will need to sync that over with iTunes. All the information you will need are in the articles below.
How to back up your devices using iCloud or iTunes
https://support.apple.com/en-us/HT203977
Restore your device from an iCloud or iTunes backup
https://support.apple.com/en-us/HT204184
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC
https://support.apple.com/en-us/HT201302
Sync your iPhone, iPad, and iPod with iTunes using USB
https://support.apple.com/en-us/HT201253
Regards,
-Norm G.
Maybe you are looking for
-
Customizing Photoshop Web Gallery in Dreamweaver
HOW DO I STOP WIDTH OF IMAGE FROM STRETCHING? (height is in proportion) more details: I've almost finished customizing a Photoshop web gallery in Dreamweaver, which is completely confusing for me (i'm a novice) and any head way i made in changing the
-
My new Iphone 5 has no sounds when connected to car's bluetooth. Never a problem with iPhone 4.
I just upgraded from an iPhone 4 to a 5, and upon conneecting my 5 to my car's bluetooth (2010 Acura TSX) I no longer hear sounds. This could be the lock sound, text alerts, or email "dings". All of them are muted. If i turn bluetooth off they re-app
-
Deploying Azure Web Site and Custom Domain Name
I'm new to Azure and not at all familiar with the various methods of publishing to Azure via Git, etc. I belong to the old school of plain old IIS folder structures and uploading HTML files to Inetpub directory for deploying web contents. I have crea
-
Monitor keeps needing to be reset
I have the Mac Mini 1,1 and have it connected to my Sony TV as its monitor. I have the cabling connected to the Sony's PC input, and then running to my AV Receiver so I can change inputs. I normally leave the Mini running all the time, and will swi
-
I'm trying to do some cleanup of my archivelog files that are over 30 days old that have been backed up using the command: delete archivelog until time 'sysdate -30'; I get an ORA-15028 saying that a file is currently being accessed. My question is h