I need to know the proper syntax for my SELECT query, please.

Hello All,
Quick one for you:
Let's say that I have several columns in a table with names such as subject_1, subject_2, subject_3, etc. The table's name is subject_names.
The number in each of the three column name examples is also a value passed along a query string, the user can select choices, 1, 2 or 3. That query string's variable is $qs.
So, what I want is a SELECT query that uses the query string value as follows (KEEP IN MIND, I know this is not the proper syntax):
"SELECT subject_[$qs]
FROM subject_names";
I have tried all sorts of cominations of quotes (single and double), dots, brackets, braces and parenthesis. I just want to know how to include such a variable within this code.
Any and all help is sincerely appreciated!
Cheers,
wordman

Well, I did give you the syntax though.
$query = 'SELECT ' . $qs . ' FROM tbl_name';
I put spaces between the periods this time to make it more clear.
If you put the actual word 'subject' in there and just want your form to name it's options as the numbers available you could do this:
$query = 'SELECT subject_' . $qs . ' FROM tbl_name';
In PHP you can use either single or double quotes around your query string, I always just use single quotes. I see a lot of other use double quotes.
Double quotes would look like:
$query = "SELECT subject_' . $qs . ' FROM tbl_name";
Or when using double quotes you can actually just place the variable right in the string without having to concatenate multiple strings like above.
Since you mentioned that you are good with passing variables I probably don't have to mention that you need to set the value attribute of your option tags (if you are using a select) to the value you want them to pass.
Ex:
<select name="choices">
     <option value="1">1</option>
     <option value="2">2</option>
     <option value="3">3</option>
</select>
If you have that part all figured out then you can use the syntax above for your query string.
Good luck.

Similar Messages

  • I need help finding the proper website for downloading the proper version of firefox for my PPC MAc

    ''locking as a duplicate of this - https://support.mozilla.com/en-US/questions/847742''
    I just asked this question but it got lost in the mail. I have a Mac PPC G5 2.0 MHZ dual Motorola processor and I need to know the proper version that my mac will work with and I need to know where on your site to go to get it. I need the exact link to download it please.
    Scott Goldberg

    Firefox 2.0.0.20 is the last release that runs on Mac OS X 10.2 and 10.3
    * http://www.mozilla.com/firefox/2.0/system-requirements/
    * https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/
    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    * http://www.mozilla.com/firefox/3.6/system-requirements/

  • Need to know the base tables for the QM datasources

    Hello SAP Experts,
    I want to know the base tables for the below mentioned datasources which stores the transaction data.
    1. 2LIS_05_QE1:  Inspection Characterstics Results
    2. 2LIS_05_QE2: Inspection Characterstics Results (Quan)
    3. 2LIS_05_QVUDN: Usage decision for Inspection
    Need your inputs.
    Thanks,
    Lasya.
    Edited by: lasya john on Dec 10, 2008 8:28 PM

    Hi Lasya,
    You can use help.sap.com for this.
    If you do not find this data source there...then
    You can go to LBWE t-code in R/3 and then infront of the data source...you have maintenance option.
    Click on that ...and go inside it in the display mode.
    Here you can see a generic pool of fields on the left side which can be included in the data source........  field present in the data sources in the right side of the pool.
    For every field you have a tructure name infront of it like MCXXXX where XXXX is the table name.
    So the field is being from that particular table.
    Even I would the same thing to reply to your thread.
    You can follow the same procedure to find the table for any LO data source.
    This is accurate in 99% cases...only in very few cases like purchasing...we get one or two fields from different tables.
    Hope it helps.
    Thanks
    Ajeet

  • Can't figure out the correct syntax for this select statement

    Hello,
    The following statement works great and gives the desired results:
    prompt
    prompt Using WITH t
    prompt
    with t as
       select a.proj_id,
              a.proj_start,
              a.proj_end,
              case when (
                         select min(a.proj_start)
                           from v b
                          where (a.proj_start  = b.proj_end)
                            and (a.proj_id    != b.proj_id)
                        is not null then 0 else 1
              end as flag
         from v a
        order by a.proj_start
    select proj_id,
           proj_start,
           proj_end,
           flag,
           -- the following select statement is what I am having a hard time
           -- "duplicating" without using the WITH clause
            select sum(t2.flag)
              from t t2
             where t2.proj_end <= t.proj_end
           ) s
      from t;As an academic exercise I wanted to rewrite the above statement without using the WITH clause, I tried this (among dozens of other tries - I've hit a mental block and can't figure it out):
    prompt
    prompt without with
    prompt
    select c.proj_id,
           c.proj_start,
           c.proj_end,
           c.flag,
           -- This is what I've tried as the equivalent statement but, it is
           -- syntactically incorrect.  What's the correct syntax for what this
           -- statement is intended ?
            select sum(t2.flag)
              from c t2
             where t2.proj_end <= c.proj_end
           ) as proj_grp
      from (
            select a.proj_id,
                   a.proj_start,
                   a.proj_end,
                   case when (
                              select min(a.proj_start)
                                from v b
                               where (a.proj_start  = b.proj_end)
                                 and (a.proj_id    != b.proj_id)
                             is not null then 0 else 1
                   end as flag
              from v a
             order by a.proj_start
           ) c;Thank you for helping, much appreciated.
    John.
    PS: The DDL for the table v used by the above statements is:
    drop table v;
    create table v (
    proj_id         number,
    proj_start      date,
    proj_end        date
    insert into v values
           ( 1, to_date('01-JAN-2005', 'dd-mon-yyyy'),
                to_date('02-JAN-2005', 'dd-mon-yyyy'));
    insert into v values
           ( 2, to_date('02-JAN-2005', 'dd-mon-yyyy'),
                to_date('03-JAN-2005', 'dd-mon-yyyy'));
    insert into v values
           ( 3, to_date('03-JAN-2005', 'dd-mon-yyyy'),
                to_date('04-JAN-2005', 'dd-mon-yyyy'));
    insert into v values
           ( 4, to_date('04-JAN-2005', 'dd-mon-yyyy'),
                to_date('05-JAN-2005', 'dd-mon-yyyy'));
    insert into v values
           ( 5, to_date('06-JAN-2005', 'dd-mon-yyyy'),
                to_date('07-JAN-2005', 'dd-mon-yyyy'));
    insert into v values
           ( 6, to_date('16-JAN-2005', 'dd-mon-yyyy'),
                to_date('17-JAN-2005', 'dd-mon-yyyy'));
    insert into v values
           ( 7, to_date('17-JAN-2005', 'dd-mon-yyyy'),
                to_date('18-JAN-2005', 'dd-mon-yyyy'));
    insert into v values
           ( 8, to_date('18-JAN-2005', 'dd-mon-yyyy'),
                to_date('19-JAN-2005', 'dd-mon-yyyy'));
    insert into v values
           ( 9, to_date('19-JAN-2005', 'dd-mon-yyyy'),
                to_date('20-JAN-2005', 'dd-mon-yyyy'));
    insert into v values
           (10, to_date('21-JAN-2005', 'dd-mon-yyyy'),
                to_date('22-JAN-2005', 'dd-mon-yyyy'));
    insert into v values
           (11, to_date('26-JAN-2005', 'dd-mon-yyyy'),
                to_date('27-JAN-2005', 'dd-mon-yyyy'));
    insert into v values
           (12, to_date('27-JAN-2005', 'dd-mon-yyyy'),
                to_date('28-JAN-2005', 'dd-mon-yyyy'));
    insert into v values
           (13, to_date('28-JAN-2005', 'dd-mon-yyyy'),
                to_date('29-JAN-2005', 'dd-mon-yyyy'));
    insert into v values
           (14, to_date('29-JAN-2005', 'dd-mon-yyyy'),
                to_date('30-JAN-2005', 'dd-mon-yyyy'));

    Hi, John,
    Not that you asked, but as you proabably know, analytic functions are much better at doing this kind of thing.
    You may be amazed (as I continually am) by how simple and efficient these queries can be.
    For example:
    WITH     got_grp          AS
         SELECT     proj_id, proj_start, proj_end
         ,     proj_end - SUM (proj_end - proj_start) OVER (ORDER BY  proj_start)     AS grp
         FROM     v
    SELECT       ROW_NUMBER () OVER (ORDER BY grp)     AS proj_grp
    ,       MIN (proj_start)                         AS proj_start
    ,       MAX (proj_end)               AS proj_end
    FROM       got_grp
    GROUP BY  grp
    ORDER BY  proj_start
    ;Produces the results you want:
      PROJ_GRP PROJ_START  PROJ_END
             1 01-Jan-2005 05-Jan-2005
             2 06-Jan-2005 07-Jan-2005
             3 16-Jan-2005 20-Jan-2005
             4 21-Jan-2005 22-Jan-2005
             5 26-Jan-2005 30-Jan-2005This is problem is an example of Neighbor-Defined Groups . You want to GROUP BY something that has 5 distinct values, to get the 5 rows above, but there's nothing in the table itself that tells you to which group each row belongs. The groups are not defined by any column in hte table, but by relationships between rows. In this case, a row is in the same group as its neighbor (the row immediatly before or after it when sorted by proj_start or proj_end) if proj_end of the earlier row is the same as proj_start of the later row. That is, there is nothing about 03-Jan-2005 that says the row with proj_id=2 is in the first group, or even that it is in the same group with its neighbor, the row with proj_id=3. Only the relation between those rows, the fact that the earlier row has end_date=03-Jan-2005 and the later row has start_date=03-Jan-2003, that says these neighbors belong to the same group.
    You're figuring out when a new group starts, and then counting how many groups have already started to see to which group each row belongs. That's a prefectly natural procedural way of approaching the problem. But SQL is not a procedural language, and sometimes another approach is much more efficient. In this case, as in many others, a Constant Difference defines the groups. The difference between proj_end (or proj_start, it doesn't matter in this case) and the total duratiojn of the rows up to that date determines a group. The actual value of that difference means nothing to you or anybody else, so I used ROW_NUMBER in the query above to map those distinct values into consecutive integers 1, 2, 3, ... which are a much simpler way to identify the groups.
    Note that the query above only requires one pass through the table, and only requires one sub-query. It does not need a WITH clause; you could easily make got_grp an in-line view.
    If you used analytic functions (LEAD or LAG) to compute flag, and then to compute proj_grp (COUNT or SUM), you would need two sub-queries, one for each analytic function, but you would still only need one pass through the table. Also, those sub-queries could be in-line views; yiou would not need to use a WITH clause.

  • Need to know the fax number for bt customer servic...

    Ive been trying to apply for a phone & broadband package for over a week now and been called twice from bt asking me to send them some proof of ID and proof of tenancy for my current address so they can go ahead with my order.. The first person who called me gave me this email address to send my scanned documents to "[email protected]"  ... i sent a email with 3 scanned documents and had no reply for 3 days and my order status was still in pending status... i then used the online chat and asked them to book me a callback so i can get some kind of update on whats happening etc ... then today i get a call and again was asked to send my ID and proof of tenancy to a fax number that would be texted to my phone after i put the phone down ... ive now been waiting since monday 4pm and still no fax number sent to me..
    Can somebody please tell me what the fax number is that i need to use for sending my ID and proof of tenancy to.
    thanks
    tony
    Solved!
    Go to Solution.

    Hi Welcome to the Forum
    Once the Forum Mods have read your post they will post an invite here once you reply to them they will take personal ownership of the problem until resolved.
    Do not send them a Personal Message as this is the incorrect contact method and cannot be properly tracked also the mod contacted may not be on shift for sometime and this will delay your help
    The forum mods normally reply within3/5 working days after you have contacted them
    They will contact you personally by email or phone
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • I need to know the application ID for Speech Feedback.

    I have a problem, the speech feedback icon is in my window after I used it for a while. I went to system preferances and turned speech feedback off. The icon did not disappear. I have tried right clicking for options but nothing happened. I also looked up a converstion in which the questioner was using later software than mine. He had updated his software and the icon was deleted on his desktop. At the end of the conversation between the apple user and the apple attendant the attendant said alternately he could go to the terminal application and type "kill #" the hashtag stands for the item ID. He reffered to an application which I have never seen nore heard of called Process ID. Of course, the user had been using older software than I at the time. I would like to know what the ID for Speech Feedback is so I can delete the icon using terminal. The other recomendations  the attendant reffered to did not work, so again, what is the system ID for the Speech Feedback icon/application?

    Hi, it'll have a different number depending on when it starts, one way to see the PID is to...
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on, sort on Nasame for instance.
    Another to just type top into Terminal...
    QS2002-G5:~ bdaqua$ top
    Processes:  94 total, 4 running, 90 sleeping... 307 threads            17:20:27
    Load Avg:  2.36, 2.27, 2.25     CPU usage:  51.2% user, 9.4% sys, 39.4% idle   
    SharedLibs: num =  190, resident = 73.9M code, 5.50M data, 22.9M LinkEdit
    MemRegions: num = 29182, resident = 1.49G + 22.6M private,  459M shared
    PhysMem:   560M wired,  437M active, 1.85G inactive, 2.82G used, 7.18G free
    VM: 18.4G +  114M   108548(0) pageins, 0(0) pageouts
      PID COMMAND      %CPU   TIME   #TH #PRTS #MREGS RPRVT  RSHRD  RSIZE  VSIZE
    1815 top         29.0%  0:05.32   1    18    22   680K   520K  1.09M  27.0M
    1813 Tri-Backup   0.6%  0:31.47   3   256   309  90.4M+ 40.9M  51.7M+  491M
    1795 Mail         0.0%  1:40.68   6   137   511  83.7M  59.4M   101M   542M
    1794 lookupd      0.0%  0:07.23   2    34    35  1.36M   712K  1.91M  28.1M
    1678 seamonkey-  99.8%  8:08:36  15   196  2049   243M- 79.3M   276M-  668M-
    1673 firefox-bi 100.7%  9:20:19  16   208  3701   561M+  104M   601M+ 1007M+
    1597 writeconfi   0.0%  0:00.09   1    22    27   368K   932K  1.79M  27.3M
    1590 NetCfgTool   0.0%  0:00.02   1    22    24   248K   900K  1.01M  27.2M
    1587 System Pre   0.0%  0:05.96   3   147   391  17.8M  35.4M  26.2M   384M
    1566 Preview      0.0%  0:05.11   4    87   304  6.01M  37.1M  16.1M   371M
    1432 httpd        0.0%  0:00.17   1    12    81   260K  1.81M   876K  28.2M
    1430 Grab         0.0%  0:01.62   3   160   300  4.61M  32.6M  19.4M   369M
    1392 SMART Util   0.0%  0:02.60   3   101   291  6.95M  45.0M  28.1M   403M
    1388 bash         0.0%  0:00.02   1    14    17   204K   968K  1.33M  27.2M
    1387 login        0.0%  0:00.02   1    16    37   124K   560K  1.68M  26.9M
    1385 Terminal     0.5%  0:55.87   3    70   251  2.71M  31.3M  17.3M   363M
    1379 httpd        0.0%  0:00.28   1    12    81   260K  1.81M   876K  28.2M
    1376 Network Ut   0.0%  8:46.44   2    89   265  3.37M  31.6M  5.77M   363M
    1374 httpd        0.0%  0:00.32   1    12    81   280K  1.80M   884K  28.2M
      958 Canvas 9?~D   1.1% 25:47.61   8   107  2184   115M  94.1M   150M   577M
    [1]+  Stopped                 top
    Type control+z to get the prompt back.

  • Need to know the simplest workflow for Flash CS5 to iPad

    Hi There,
    Can you please tell me the simplest workflow for Flash CS5 to iPad.
    I want to put my company's flashCS5 made interactive portfolio(with FLV video showreel) into ipad to show my clients.
    What is the simplest way?? I am not familier with codes or programming.
    Can you help me guys??
    -Sahid
    I am using PC.

    It doesn't matter whether you use a MAC or a PC to create the content - the iPad simply will not accept it. It was designed with exactly that purpose in mind. That's why I advised you to get rid of it. Stick to PC and you'll have zero problems.
    Just a hint - a Sony Vaio (the 11 " models with carbon fiber casing) look even more prosperous, are the same weight, and since they run Windows OS will not have the typical Apple limitatations
    Emil Georgiev - Flash & Web Design

  • Unsure of syntax for SQL SELECT statement, please help

    I am trying to execute the following SQL statement:
    ResultSet rs = stB.executeQuery("SELECT quantity FROM stocklevels WHERE code=salesCode[x]");where SalesCode is an integer array and x is a counter used to loop this part of the code. I keep getting the "syntax error - missing operator" message when I run the code and get to this line, can anybody please tell me the correct syntax/form to use? Many thanks.

    Is salesCode an array in Java or in your DB? I don't know anything about SQL arrays, so I'll assume it's in your Java code.
    You want to put the value of salesCode[x] into the query--say 123456. But what you've got is like doing System.out.println("The code = salesCode[x]"); and then wondering why you're seeing "salesCode[x]" instead of "123456. You'd need to do System.out.println("The code = " + salesCode[x]); Similarly, you could take the "salesCode[x]" out of the string literal that's forming the query, in order to have it evaluated as an int and stuffed into the string as "123456". It would be better to use a PreparedStatement though: ps = con.prepareStatement("select .... where code = ?");
    ps.setInt(1, salsedCode[x]);
    rs = ps.executeQuery();

  • Need to know the best practice for converting string to double

    I have a string and want to convert to double if it is a valid number, else want to keep as it is. There can be couple of ways doing it and I want to know which one is best if I have lots of strings, specially from performance point of view.
    1) Use Double.parseDouble(myString) and catching Number format exception to detect it is not a number. One of my colleague said it does not give good performance because of exception catching,
    2) Use of org.apache.commons.lang.math.NumberUtils.isNumber() and if it is true then only parse it - so don't rely on exception.
    I did some performance testing - putting it in a loop and trying out for 2 scenarios - one loop for proper numeric value string and another for non-numeric. What I found out was if strings are not proper then parseDouble() is taking long time (because of exception catching) and in that case using NumberUtils.isNumber() makes sense.
    Would like to hear expert views on this.
    Thanks
    Manisha

    If you need it as a double you must convert it to a double and catch the exception. This means that testing it first is a waste of time in the case when the test succeeds - did your colleague think of that?
    Catching the exception is possibly slower than the test. Whether this is significant depends on the relative timings of the test and catching the exception, and also on the expected error rate. If this is below about 40% I suggest your colleague is talking through his esteemed hat.
    And of course the best test by far is the conversion itself. Using any other test runs the risk of its rules being different from those applied by the conversion.
    In any case you are obliged to write the code that catches the exception. You're not obliged to write the pre-test code.
    My personal rule for efficiency is to minimize lines of code until hard evidence to the contrary proves that further improvement is required.

  • I am a student working on a project for school and I need to know the bandwidth options for the iPad mini with retina display

    I am working on a project where I am required to introduce a new product for consideration in the hospital setting.  I have chosen the iPad mini, and have been able to locate the information that I need except for the bandwidth options.  Any help would be appreciated.

    I don't know what you mean by "bandwidth options". If you mean the frequencies and bands the iPad can use with cell carriers, those are listed in the Wireless and Cellular area of the tech specs. For iPads sold in the US, see:
    http://www.apple.com/ipad-mini/specs/
    If that's not what you meant, please post back and clarify what you mean by "bandwidth options".
    Regards.

  • Need to know the Business Package for CRM4.0 Sales in EP6.0

    Hi experts,
      We are trying to implement the CRM4.0 Sales business package in our EP6.0 environment( Our Backend R/3 is in 4.6B) . We would like to install complete package for the Sales module (The main (Top level) menus in the portal look like the following ==>
    Activities..  Account Management  ... Acquisition.. Sales .. Products..  Analysis..   Home..  R/3 Integration .. CRM integration .. APO integration..
    Below every top level menus there are sub menus.. For example under Sales we would have the folliwng ( Overview.. Quotation.. Orders .. Contracts.. Billing Documents )
    In the list of package from CRM (available in the SDN) the following looks like the currect one, can anybody advice please.
      Business Package for SAP CRM 4.0     60.2.3   SAP AG   Unrestricted Shipment.
    However, since we are only interested about the Sales Portion only can we choose to import content that is relevant only to the CRM SALES as well as CRM SALES analytics and not anything else? If it's possible the what is the procedure? If not then I assume that we will have to import the entire content and activate only the portion that we need. Please advice.
      Appreciate a detail reply.
       Thanks
    Arun

    Hi Arun,
    When u download and apply a busiiness pacakge u will get the complete package.
    After appling the bussiness package u will get a report showing whcih all roles worksets etc are added to the portal. And also In portal contants there will be a folder created. There u can see the roles , worksets pages iviews etc.
    You can edit the role and put the desired iviews or pages according to u r demand.
    Hope this Helps
    gEorgE
    Read the log file(generated after importing the BP) it will give u all the information abt the contents that are uploaded to the portal server.

  • Need to know the best method for pattern matching

    Hi,
    I need a best a way to do the pattern matching with better performance
    for the following requirement.
    i need to search for a set of records as per the following requirements.
    1. The input string will be split into tokens with space as delimiter
    so if the user enters the text 'severe head ache',the tokens formed will be
    severe
    head
    ache
    2. The terms which contain exact match of the tokens formed should be fetched from the database
    (i.e)
    i. the token should appear in the term as such and no alpha-numeric character should be appended to it but a single space or any single non alpha-numeric characer is allowed
    ii. the token may occur anywhere in the string.(like start, end, middle etc.)
    iii. the term should contain all the tokens
    For ex. the following terms will be fetched for the above input
    1. patient has severe head ache
    2. severe, head ache are present
    3. leg pain "severe" #head pain
    4. pain, severe in head, leg
    But following terms should not be fetched
    1. severe leg pain - (it does not have the token 'head')
    2. headache severe and leg pain - (head is a part of the word headache)
    3. head67 severe pain - (head is a part of the word head67)
    Thanks

    How about Oracle Text? There's even a Text dedicated on this topic here.
    C.

  • I would like to fix a bug, but I need to know the leading developer for Firefox sync. I need verification of a Mozilla dev for a class project prerequisite.

    I found bug 859889 on Bugzilla, I would like to develop a patch for it. In my software development class, my professor asked us to get the permission of a leading developer for our project proposal. If you can direct me to such a developer, that would be great. The dev in question should also have access to Firefox Android's code base, as to apply the patch if completed and accepted.
    The url to the bugzilla page is "https://bugzilla.mozilla.org/show_bug.cgi?id=859889".

    I guess that is you that has already posted [https://bugzilla.mozilla.org/show_bug.cgi?id=859889#c1 Bug 859889#c1]
    Presumably you already have the C++ and other skills to tackle this. I suggest you look at and follow links from
    * https://developer.mozilla.org/en-US/docs/Introduction
    Does that help ?

  • Need to know the sessions configurations for Conferencing and Transocoder on Voice Gatway

    Hi All
    Please help me to understand the concept of how we can calculate the session while we are configurating the conferencing ang transcoder on Voice gateway.
    Regardss
    Chaman

    The calculations can get quite complex with DSP sharing, codec complexities, etc.  Start of with the DSP calculator tool (
    http://www.cisco.com/web/applicat/dsprecal/dsp_calc.html?utm_source=twitterfeed&utm_medium=twitter) and see if it helps you find what you are looking for which I think is how many conferencing and transcoding sessions you can have based on your router configuration.

  • What is the proper name for Mac OS? OS X? Apple Mac OS X?

    It's a tad bit confusing for me since I am new to Apple.
    What do you call it the true name for it?
    Apple Mac OS?
    OS X?
    If I type in OS X It shows all the versions released form Apple.
    Like in the snap shot below.
    http://i1157.photobucket.com/albums/p600/napninjanx/Snapshots/Untitled_zps2d1aa9 90.png
    When I searched for MAC OS it did not show the versions of released OS X for Apple.
    Like in the snapshow below.
    http://i1157.photobucket.com/albums/p600/napninjanx/Snapshots/2_zpsbae85e49.png
    But when I searched on eBay for Snow Leopard it showed the brand name
    http://i1157.photobucket.com/albums/p600/napninjanx/Snapshots/3_zpsbcb588ac.png
    Then I thought going by brand name and model is the way to know the proper name for it.
    I think the proper name for it is Apple Mac OS X that's how you type it in order to know other realses if I am not mistaken.

    You can call it Mac OS X or OS X and others will know what you mean.
    If you click the apple at the left side of the menu bar, About This Mac, you will see OS X so that is what Apple calls it.

Maybe you are looking for

  • Password protected PDF in iBooks not displaying

    I loaded a password protected PDF into my iTunes library and then synced it with iPad (4th gen iOS 6.1.3). I see the PDF in iBooks on the iPad and when I click on it, it prompts for the password. I input the password and PDF "opens" but it's just the

  • Automated activity not executing in BPM process

    Hi All, We have created a BPM process in NWCE72, and it was executing fine. When we added an automated activitiy and assigned a Web Service created from a rule and run the process, it is possible to run the process till the automated activity only. T

  • How i can execute the sql query in java code

    I already have sql query in jave plateform i need to execute this code how i can do that. i have unix env and with oracle database. should i just run this query in my sqlplus. this file has extention .java. thanks

  • Org Structure Button

    Hi, I am currently thinking of including an Org Structure Button for my Customed HR ABAP Report. Could anyone provide some negative and positive impact on the report. Also, will it affect the performance of the program? Thanks in advance...

  • Blank document when converting PDF problem

    when converting a pdf to word doc it is blank, what can i do to see it?