I need to know why when I mix with Logic Pro 9...
Hi, I just purchased Login Pro 9..Love It!!! But I'm creating a song out of all software instruments...and I have trying to mix it to a stereo out 1-2. I can only correct the volume levels on 2 out of the 7 tracks. The other 5 can be adjusted a little, but I have them all the way off in the mixer and they are still coming thru. I've notice that 5 of the 7 tracks are using Bus 20...is that the Bus of all the software instruments? Please reply and help if you have the time. Thank you.
David
So, if you've turned it all the way down, what's the point in having it then ?
Do you have other stuff going to that bus or not - there has to be a point to sending stuff to a bus - to effect it all the constituents in varying degrees very often, or maybe compressing a group of sounds, there are all sorts of reasons, so you have to work out whether the bus fader its actually doing anything.
The simplest way of sending to a bus is just as a grouping function - so you could adjust the different sounds in a drumkit, for example and be able to lower or raise the whole drumkit, but there are all sorts of uses.
Similar Messages
-
I need to know why my mac now with lion ,,,long time to shutdown ???
When Lion became available I downloaded it immediately
but with big problem take long time to shutdowen !!!
anyone know why ?We are all itunes users just like you.
Try contacting Apple:
http://www.apple.com/support/contact/ -
Euphonix MC Mix with Logic Pro 7 (not 8)
Has anyone picked up this:
http://www.euphonix.com/artist/products/mc_mix/
And had it connected up to Logic Pro 7? (not Logic Pro 8, I upgraded but stayed with 7)
The Euphonix can use the HUI protocol, so it should function, and I'm very close to buying this - I was just wondering how the user experience felt (especially with regard Inserts etc). Good or bad purchase? I cannot demo the unit; no importer in Hong Kong.
Thanks in advance for your comments.Sup All,
I tried one of the MC Mix units that my friend picked up although we couldn't successfully used both units at the same time due to a Ethernet jack issue that i determined later by connecting one unit at a time.
Setup and Config were a breeze. I used it intensively in Logic Pro. I like all the functions for it works almost as if it were a Mackie Controller. But, one thing that could make it a deal breaker for now is that it is very sluggish in response waiting for logic to send the proper Data to the unit or vice-versa.
Even when the MC Mix was not plug to my system everything was still slow; so it is safe to assume it's a Eucon Software issue. Once I did uninstall Logic worked flawless.
With that unit you can do literally anything a Mix Controller does. So, optimistic thoughts say they, meaning Euphonix will workout the issues within weeks.( Unofficially )
PROs
Mixer felt great.
Look Great.
Can be used while you are connected to the internet.
Usage is excellent
Easy IP Config. Dynamic or static.
Instantiating Inserts, Software Instruments is excellent
Everything as the demo shows. http://www.euphonix.com/artist/products/mc_mix/video.php
The Riser is cool
A New Software installer replaces the Cd that comes with the units
CONS
Sluggish
The OLED Displays don't show Values until you touch the knobs or faders.
WISHES
Meter Bridge or Better Meters
Counter or Measure Displays
And lastly... Don't know if it's Gigabit or Megabit Ethernet Connection.
I connected it directly to my Computer as well as through two Ethernet Hub; Same Results every time.
( Minus the Internet of course at some points )
Chap:A+Media -
I need to know why when I send a message to ********* and vice versus I get the message back on my phone
<Edited by Host>iMessage is designed so you can start a message on your phone, continue onyour iPad and then move to your iPod if you want.
If you use the same ID and phone number across all the devices the messages will trickle down to all of them.
As Axeman said, go into settings on all devices and uncheck the phone numbers or email addresses you don't want to have that device access. -
HT1355 i need to know why my facetime will only work when im connected to wifi.
i need to know why facetime will only work when connected to wifi.
Facetime in cellular will only work on the iPhone 4S and iPhone 5, and only if the carrier supports it.
-
I am going to buy a macbook pro for grade 12, and I need to know wheather I should get a macbook pro or a macbook pro retina. If someone could tell me (in a very simple way) which one is,better for me and why, I would be ever so apprreciative.
Why do you need a expensive MacBook Pro?
Your attending high school and unless everyone else is rich also your likely going to be a target by the more poorer students for theft or damage to the machine.
You could keep it home, but if you need it for class then your exposed again.
Also at that age your not very careful yet, a MacBook Pro is a expensive and easily damaged machine.
Unless your made of money and so are others at your school, I would recommned a low profile, just does the job cheap Windows PC.
If it dies, gets lost, stolen or damaged because of your inexperince handling senstivie electronics then it's no big deal.
You can buy a Mac later on when your sure you have a need for it, currently there isn't much advantage of owning a Mac compared to a PC, they do just about the same things now, one just looks prettier than the other.
Since 95% of the world uses Windows PC's your going to have to install Windows on the Mac in order to keep your skills up there or be unemployed, so it's a extra headache and expense.
good luck -
good morning! i'd like to know why when I write an email in Mail, it creates numerous copies each second which fill the trash box. My email is set up with IMAP and is a gmail account. Thanks
Open Mail preferences and select Accounts then MailBox Behavior. You probably need to unclick the safe draft to server.
-
Does anyone know why when printing from light room to pdf the program just closes on me? I've talked to tech support and they are going to get back to me tomorrow but I am desperate I have tuns of homework to finish !!
No, but if you really mean that the way you said it, I don't know that Print is the best way to this. If you haven't already, after selecting the images you want to get printed, try clicking the Export button in Book or Library module and then selecting format .PDF. Once you export the file to .PDF, try opening it where you saved it and printing from there, not in Lightroom but in Adobe Reader. If that doesn't help, here are a couple of videos that might--follow their instructions carefully with no shortcuts:
Adobe Photoshop Lightroom 4's Export to PDF Using the New Book Module - YouTube
Lightroom 5 - Exporting Images | Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV
If Lightroom keeps closing even when you try all this, you may need to reinstall Lightroom because your copy may be screwed up. -
I need to know why songs in my library show and ICLOUD status of "waiting" and I can never play them.
The same thing happened to me.
1. You will need to know the location of your iTunes library for later, the default is under music under your username. If its not there find it and remember where it is for later.
2. Then you have to exit iTunes and create a new empty library. To do this hold the option key when you open iTunes. Choose create Library on the pop up dialogue. Create the library anywhere on your system, you can delete the entire library once you have completed your iCloud changes.
3. When the library opens in iTunes it will be empty. Click on iTunes Match and click the start button. after it finishes all of the songs on your iCloud match account will be listed under music.
4. you can select up to 1000 at a time and delete them.
5. when you have deleted everything close iTunes and open again holding the option key and navigate to your original library, usually in the music folder under your username. You should be all set and can click iTunes match again and your account will be populated with the ones in your current library.
6. You can navigate to the temp library you created in finder and delete it as it is no longer needed.
Good luck, I hope this helps. -
Hi.i really need to know why some iphone 5s lose wi-fi or bluetooth comminucations after a while?!? i just charged it with my iphone 4's adapter,it can be the reason?!?!?!?! i dont think so....
It would help to have more details about when your phone loses wi-fi or bluetooth.
When an iPhone locks itself it turns Wi-fi off. I haven't had any problems with bluetooth turning off.
You might try restarting the phone. Double tap the home button to open the multitasking drawer, tap and hold on any icon in the drawer until the icons start to jiggle, tap the X that appears on the upper corner of each icon to shut them all down. Press the Home button to close the drawer. Then hold the sleep/wake button down and wait for the Slide to Power Off slider appears. Slide it and wait for the phone to shut down. Wait a few seconds and then press and hold the sleep/wake button again until the Apple logo appears and the phone restarts.
You can also reset your network settings, go to Settings => General => Reset Network Settings. You will have to reconnect and enter passwords for any wi-fi networks that you normally connect to after you do this.
Let us know if this doesn't help. -
My securety code on my debit card is not working and I need to know why?
my securety code on my debit card is not working and I need to know why?
You need to contact iTunes support. We are users here just like you and would have no idea why it isn't working. At the bottom of the iTunes Store page in iTunes there is a contact link.
-
My iTunes account has been disabled. I need to know why, and how to get it deactivated.
My its account has been disabled. I need to know why and how can I get it re-activated? I have a lot of money in that account!
See if this helps -> http://support.apple.com/kb/TS2446
-
Hi does anyone know why when on certain webpages does my ipad chuck my to the app screen and if so how do I recitify this. Thankyou Raylea
taimsesasta, Not positive, but I was using a picture that had orange in it as my login icon, and when I changed it to a pic that was basically gray, the Apple logo no longer flashed orange. Somehow, it seems, that the Apple logo was momentarily picking up the orange color from my login art and then returning to its normal gray. That's all I know at this point.
-
I want to know why when i turn on my iPhone the screen turns white
i want to know why when i turn on my iPhone the screen turns white
Hello Manjanela,
Article: TS2802 may help you with the white screen.
Display shows a white screen
Try turning iPhone off and then on again.
If the iPhone will not turn off, try to reset it.
If that doesn't work, try restoring the device.
Have a nice day,
Mario -
Does anyone know why- when I import a one minute video project into Final Cut X from I Movie the resolution that looked alright full screen in I Movie instantly becomes worst on full screen in Final Cut X...but clear again when I stop it to still position?
I'm new to video editing but I think I recall seeing an option in FCPX which lets you choose the video quality for the preview window. I think the window reduces the quality when playing back for performance reasons and so perhaps that is why it seems to have less quality when moved over to FCPX? Just a possibility, I'm sure one of the more experienced users can confirm or deny this theory.
Maybe you are looking for
-
AS2 Site Audio Links Not Working, Please Help!
I have built a site for a client using AS2 which contains links to streaming mp3s. The audio loads and runs just fine in Safari but malfuntions/doesn't even play in other browsers. Here is the site in question: labbatomarco.com I'm hoping that o
-
Hello all, Probably silly and simple questions? 1) If my understanding is correct, a property filter hide/modify existing properties or add virtual properties...but, only temporarily right? i mean.. they are not changed permanently .. it's only for
-
Text element of sales order form
I have a question about the text element of sales order printing form. i run a sales order with some price condition (ZKFA) - VA03 and want to print it out before i print it without ZKFA price, it's correct when printing , after input the ZKFA price
-
Receiver can't use "download all"
I sent today 31 pictures through a "public link" to some people. all of them could click on the link and see the pictures. but the blue button on the top right "download all" doesn't do nothing. no download is starting. if you click on each photo -->
-
we just purchased a new Cisco Aironet 1142N and it does get hot towards the top center where the Cisco logo is. Is this normal? Should I be concerned?