I need to learn how to update my ipod so i can be able to download apps

i do not know how to update my ipod

Update it from iTunes on a computer as described at the bottom of this article; there isn't a Software Update option in General on iOS versions prior to 5.0. It can only be updated directly to the newest iOS release supported by the device’s hardware.
The maximum iOS version for the first generation iPod touch and original iPhone is 3.1.3.
The maximum iOS version for the second generation iPod touch and the iPhone 3G is 4.2.1.
The maximum iOS version for the fourth generation iPod touch and iPhone 3GS is 6.1.6.
If you don't know what device you have, append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
(110955)

Similar Messages

HT4623 Hi, I need help on how to update software for my ipad1, can someone help me?

Hi, I need help on how to update software for my ipad1, can someone help me?

The iPad 1 can not be upgraded beyond 5.1.1. If you haven't upgraded to iOS 5.1.1, see the info below.
If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

I can't seem to update my ipod touch 2nd gen in order to download apps like sirius and iheart

I cannot seem to update my ipod touch 2nd gen higher than 4.2.1 and it says it's up to date.so now it won't let me download iheart or sirius. can I update it and how?

you can't. that' the last OS for that version of iPod. buy a new one

Need help learning how to update my system

Hey guys!
I need to update my system, so I went ot the wiki and learned that I have to type:
pacman -Syu
in the terminal, but I get a weird output that I am unsure how to answer:
replace kernel26-firmware with core/linux-firmware? [Y/n]
I am unsure what the difference is and am afraid of answering the wrong answer. I would really appreciate it if someone could tell me what the difference between the two are and which one I should pick. Thanks!

I think we'll start before 'updating the system' with something else. Try googling the line you pasted, or searching the forums with that line. Ask back if you don't understand.

I need to learn how to use all about java & mysql...help me!

I have a situation here, I need to learn how to use java with mysql
. Can I connect to a MYSQL DB with servlets?
how can I build an e-mail server with java (no matter how difficult)
please, I need help, and I really apreciate your help.
thank you very much!!

I have a situation here, I need to learn how to use
java with mysql
. Can I connect to a MYSQL DB with servlets?Yes... documentation to help you connect to any database can be found at http://java.sun.com/products/jdbc. To connect to MySQL, you'll need drivers (sourceforge.net), and the specific connection URL for those drivers will be included in the documentation.
how can I build an e-mail server with java (no matter
how difficult)If you're fairly new to JSP/Servlets, you may be in over your head here, since an email server is no easy application to code. Here's a link to the source code for the JAMES project... Apache's Java email server... maybe you can find some useful information there...
http://www.ibiblio.org/pub/packages/infosystems/WWW/servers/apache/jakarta/james/source/

New To Mac's Need to learn how to use it!

I recently have become the owner of a Power Mac G4. I am a longtime pc user and now I need to learn as much about the Mac. Where can I get good clear complete manuals or books on just how the Mac works and how do you move around in one, such as looking at directories, creating the same, installing software programs, etc.
Thanks!

Welcome to Mac-dom!
Here's another great Apple page with lots of instructional videos if, like me, you are a visual learner:
http://www.apple.com/findouthow/mac/
When you start thinking about hardware questions, consider posting in the other G4 forum here. You model number indicates you have a G4 "Quicksliver," one generation older than the ones covered in this forum. The forum labeling is so cryptic that is hard to figure out exactly where to post G4 questions. Either place will work, frankly.
Updating your equipment line in your profile will make it faster to get help. A lot of people don't know an M8493 is a Quicksilver, so use the name instead. Also do "About this Mac" from the Apple menu to find your processor speed and amount of RAM installed. Adding that to the equipment line helps everyone.
I hope you enjoy the Apple forums as much as I do. I've learned a lot here!
A

Need to learn how to create a slideshow in Flash

Hello All,
I'm new to Flash and I need to learn how to do a slideshow with exactly the same features as can be found in this link:
http://www.esppromo.com/index.asp
Just like at the link above, it needs to play through the slides automatically once the page is loaded, each slide needs to link to a specific URL, and I need controls similar to the boxes at the bottom so the viewer can click on any specific slide they wish to view (I'd like to have numbers in the boxes though). The transitions don't have to slide across like this. If a fade is easier, that would be fine.
Since I've looked online, but can't find any tutorials for doing this in Flash Professional, I think I'll pick up a book on Flash. There are some online tutorials that are close but nothing that is exactly what I'm looking for.
I'm just wondering if anyone can recommend a particular book that covers creating this type of slide show with the links and controls exactly as I need it to be. I see these types of slide shows on a lot of sites now, so I'm hoping that maybe someone else on this forum has had to learn how to do this and can recommend a book they used?
I was looking at Adobe Flash Professional CS5 Classroom in a Book and it looked like it may be what I'm after, but I am rather cautious, as I don't want to end up with instructions that are close to what I am looking for, but not quite right.
Actually, I thought I'd be able to do this fairly easily with Flash Catalyst, so I updated to Adobe CS5 Design Premium. I found that Flash Catalyst can be used to create a slide show like this, but unfortunately it won't play automatically when the page loads and the viewer has to manually click through the slides, which is not what I need. I could be wrong, but from what I've read, I need Flash Builder to add code so the slide show will play automatically if I create it in Flash Catalyst. Since it's not an option for me to buy more software at this time, I've decided to learn how to do this in Flash Professional.
I really want to learn how to do this. I expect to go on and create more using Flash, but for now I just REALLY need to figure this slide show out.
If anyone can help out, I'd really appreciate it!
Thanks,
William

Edit:
i'm sorry. it is a huge work to type this and will be confusing as hell. i'm already up to 1 full word page of explanation. Though i am able to do it, explaning it in full lengh is ... well.. very hard. Way harder than it is to make your flash itself.
I can however point you to some element you should read about how to make them:
- How to use timeline in flash cs4
- how to create a button in flash cs4
- How to make "CLASSIC TWEEN" in flash cs4
- How to use ActionScript 2 ( AS2) basic command like : GetUrl, Gotoandplay, Stop and how to put those script in the right location. ( AS2 allow you to put script directly on the button itself. however it is best to put it in the Action Layer that you will have to build in the timeline.
- How to import thing in library.
keep in mind that what you want to make is mostly a Logic probleme...
- Image 1 click = GetURL X,
- After Y time, Switch image 1 to image 2 with animation. Do the same for the button.
- If you click on button 1 while being on image 3, you have to set all the reverse animation in the timeline, and use a lot of Gotoandplay.
Hope this help you a little.
I'm sorry. i really wanted to help you do it, but it is just a monstruous job to write all this.

Hello, i am new to the mac and i need to learn how to re image using an external hard drive

Hello, i am new, like baby fresh new,...lol, to the mac and i need to learn how to re-image using an external hard drive.

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Need to know how to update my iphone 4 to ios5 have downloaded the update already

I have tried to update my iphone with itunes but when it gets to the end of the down load the message I get is server session timed out
so iave downloaded the the update in safari and need to know how to update from there

What itunes is asking is would you like to import the files and settings of your ipod to your iphone? It'll import things like contacts, calendar, mail, apps with app data. If you want your phone set up just like your ipod then use that option. Otherwise pick "set up as a new device" and it'll allow you to keep the two seperate and you will be able to sync them both to your itunes independently of each other.

I am very new to mac products, I have a Mac Pro 13" I need to learn how to use it ? looking video courses any will helpI

I am very new to mac products, I have a Mac Pro 13" I need to learn how to use it ? looking video courses any will help .....

Go to www.apple.com for a start. See, also, Mac Basics.

I must purchase a photo editing tool and don't know if I should go with Photoshop or Lightroom. I need to learn how to do basic photo editing on pictures used for a news website. Thoughts? Thanks!

I must purchase a photo editing tool and don't know if I should go with Photoshop or Lightroom. I need to learn how to do basic photo editing on pictures used for a news website. Thoughts? Thanks!

Hi scienceiscool,
You can go ahead with the photography plan as mentioned in the link below:
https://creative.adobe.com/plans/photography?promoid=KLXML
Kindly refer to the link below to get used to the application better:
Photoshop CC tutorials from novice to expert
Regards,
Sheena K

I need to learn how to use jump lists.

'''bold text'''I need to learn how to use jump lists. acording to all that I have muddled thru my ereader will only download books I have purchased and free ones if I use a jump list. I don't know how. If this is the correct method for ereaders downloads someone please explain it, simply to me. I have a reader I am totally unable to use. I have read the manual many times. That info doesn't work.

How is that related to Firefox support?

I need to learn how to manage pictures on my I-pad. I get multiples of pics taken and many that cannot be deleted.

I need to learn how to manage pictures on my I-pad. I get multiples of pictures taken & there are pictures I want to delete but can't.

If you're syncing with iTunes, you'll have to un-sync to remove the ones you want to take off.
Manually managing content with iTunes

Need to learn how I can re size a big pdf file in a Mac Book air

Need to learn how resize pdf file in a Mac Book Air

Oh, it's certainly possible, I just don't recommend you do it.
If you really want to do it, go to Tools - Pages - Split Document and proceed from there.

Help need to learn how to do this?

1. Name, which has fields:
    - String lastname
    - String firstname
2. Address, which has fields:
    - int stnum
    - String street
    - String city
    - String postalCode
3. PassengerRecord, which has fields:
    - int passengerID
    - Name passengerName
    - Address passengerAddr
4. Passengers, which has fields:
    - int numpassengers
    - PassengerRecord[] passRecords
5. TrainStation, which has fields:
    - String trainStationName
    - Address trainStationAddr
    - Passengers passengerRecs
The main routine, in class MainClass, MUST look like this:
public static void main(String[] args){
TrainStation station = new TrainStation();
station.readIn();
System.out.printf("station=%s",station.toString());
}//main
which creates an instance of class TrainStation,
then calls the readIn() function of that TrainStation object which will:
1. read in the trainStationName, which is a String
2. read in the trainStationAddr, by calling trainStationAddr.readIn()
3. read in passengerRecs, by calling passengerRecs.readIn() which
    reads in the number of PassengerRecord objects and
    creates the array passRecords.
    Then, passengerRecs.readIn() calls readIn() on each
    passenger record in array passRecords, which will
    in turn read in the passengerID,
    and call passengerName.readIn(), and passengerAddr.readIn()
After calling station.readIn(), main will print out all of
the contents of the TrainStation object pointed to by printing
station.toString().can someone help me learn this fast like any places where i can read and learn how to do this?

javakingloww wrote:
can someone help me learn this fast like any places where i can read and learn how to do this?Assuming you went to class and payed attention, I would review the notes you took during class. Otherwise I would review any handouts or online material available that saved you from writing notes that day.
Mel

I need to learn how to update my ipod so i can be able to download apps

Similar Messages

Maybe you are looking for