I need to link to a screen within a movie from outside the movie

Hi,
That last question was answered so quickly, I'll ask this
next one right away:
I need to link to a screen within a movie from outside the
movie (so for example, from file1.cp, I need to open file 2, screen
4).
Am I able to do this in Captivate 1?
Thanks,
Kim

I've just gotten a chance to check out these responses. About
the Flash - no can do. Don't have it. And about breaking the file
apart, that would get messy because I have several files already.
OK. At least I know my options are limited to linking to page 1
from outside, so I'll have to be creative.
Thanks for the response.
Kim

Similar Messages

I need help in resolving a problem that prevents me from accessing the iTunes store. Message reads " iTunes cannot contact the iTunes store" and also says that my laptop is no longer authorized to access my account. Help!

I need help in resolving a problem that prevents me from accessing the iTunes store. Message reads " iTunes cannot contact the iTunes store" and also says that my laptop is no longer authorized to access my account. Help!

Go up to the top of your screen on iTunes and click on 'Store'. Then go down to 'Authorize This Computer'. That should cover part of it unless you've already authorized a bunch of other computers to use your account. If that's the case, you'll have to go to one of those computers and click the button just below it to 'deauthorize your account' from that computer. If you're not able to access the store, check your internet connection to make sure you are connected. Hope this helps.. good luck!

Whenever I do a "lookup" from other software, or click on a hyperlink from outside the browser, the browser appears but the URL is not in the address window and the link never loads.why?

I may be reading an article while within Foxfire, and click on a hyperlink in the article...or I may be using Thunderbird email and click on a hyperlink within the email...or I may be using software like Quicken and do a "lookup" to a webpage...no matter, any time I click on the hyperlink, it will switch to Firefox automatically (good!) and the tab shows "loading", but a webpage never loads, and the URL address window never has anything in it. On the other hand, if I copy and paste the URL from whatever hyperlink I'm trying to use, and then paste that into Firefox's URL address window, it will open. How did I lose the auto load feature?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Build array within scriptblock and use outside the block

Hi,
I am using scriptblock to run several commands in parallel. The code working fine. BUT I am trying to build an array of object within the scriptblock. My aim is to have all execution results in one array and after exiting the script block to print the results
from all run. I notice that what i build within script block getting destroyed and in the end the $result variable is null. Is there any way that I can build and accumulate the results in a variable and use that outside scriptblock?
code:
$result= @()
ForEach ($Command in $Commands)
While (@(Get-Job -state running).count -ge $MaxThreads){
Start-Sleep -Milliseconds $SleepTimer
Start-Job -scriptblock {
$n = $Command
$result += New-Object Psobject -property @{DATE = (Get-Date -format "MMddyy"); RESULT = $n}
} -ArgumentList $Command -Name "$($Command)job" | Out-Null
While (@(Get-Job -State Running).count -gt 0)
Start-Sleep -Milliseconds $SleepTimer
ForEach($Job in Get-Job)
Receive-Job -Job $Job
Remove-job -Force $Job
$result

Yep, but my real problem is that every now and again I just can't help myself and end up feeding the troll.
I've had plenty of fun recently watching it twist in the wind and blather on about absolutely nothing of any substance. I'm assuming we'll get another missive across these threads later (dance puppet, DANCE)...
The real shame though is when it ends up attacking the poor random OPs for asking a question. We're used to dealing with it so I can laugh at the situation, but it does bother me that the people who are just out looking for help end up getting lambasted
by some complete jerk.
I'm going to keep on ignoring it, hopefully if we all just stop playing along it'll get tired and go be useless somewhere else.
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)
Offensive as he (?) can often be, it is difficult to take his attacks personally, because he obviously has no clue what (or who) he is talking about.
What bothers me more about this phenomenon is:
the disrespect shown to people just looking for help;
the impact on the effectiveness of the forum with all the time and space wasted for no purpose;
the troll himself, who seems to either be suffering some kind of emotional or personality disorder, or is playing some kind of game without concern for its effect.
He doesn't get much positive feedback here, so perhaps he just feels that being able to write the way he does in a public forum, and get some response, is enough to prove his worth to his ego. Unfortunately, we will probably never find out more about him
than is evident from his posts.
Al Dunbar -- remember to 'mark or propose as answer' or 'vote as helpful' as appropriate.
Seems to be a "tagger" mentality. Marking territory with acts of vandalism.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

???need to link 2 adobe ID's that belong to the same person. have over 100 books from old adobe id that will not open with new id??? jan

????i have an old and a new adobe ID and a new one. need to link them . i have over 100 books from old id that will not open now on my ereader.
please help

Hello,
Yes this is possible.
You can join both the adobe id's at: https://adeactivate.adobe.com/adept/en/JoinAccountLoginForm.jsp
Thanks

White Screen when opening PDF from within a website program

I have previously been able to use the marketing products associated with http://greenhousebhgre.com A link takes me to
http://maryorfali.betteragents.com/admin/marketingmaterials/# and from them I have been able to update my marketing flyers by selecting Create/Edit. Now I just get a white screen. These flyers can be saved as PDFs and I am able to open them from outside the website.

So you are editing your flyers online at that website? If so, Adobe Reader is not involved in any way; Adobe Reader cannot create or edit PDF documents.
My suggestion: try another browser. If that does not help, contact the people who maintain that website.

I need a link to download Acrobat 8 pro

I need a link to download Acrobat 8 pro

Hi Erik,
Here's the page that has a link to the Acrobat 8 download:
Download Acrobat products | 9, 8
http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html
Regards,
Charlene

Having trouble exiting settings screen within contacts

Loving the new phone but having a problem exiting the settings screen within contacts
If you close the contact app and then reopen it you are still on the settings screen, I am trying to get back to a screen where I can add my contacts.
Anyone know how to close the settings screen within contacts?
Thanks, Dave.
Solved!
Go to Solution.

When you are on the contact settings screen at the bottom left corner there is a tab but when you press it it brings you to the contact hub ... from there you cant go anywhere except back to the settings screen one level up.
Do you really think that the back tab is somehow gone?
Doesn't make sense to me. I will try a battery pull and replace to see if the problem resets but I doubt it will.
Can anyone else out there go into contact settings and back out with a back button in the bottom left corner?
If so I guess I will have to set back to factory settings. ... but seems like some kind of flaw?? - Dave R.

Any way to link to a specific message from outside Mail?

Hi,
I am putting together a fairly basic customer enquiry database using Mac OS X Mail and an external database. The system will keep in the database a list of specific email messages associated with a particular customer, and should allow these messages to be brought up within Mail by clicking on a link in the database client.
However, Mail doesn't seem to offer any way of linking to a specific message within its database from outside Mail.
I imagined I would be able to do this instead by using the Message-Id: headers from incoming emails, and then getting Mail to do a search on these headers. However, putting a Message-Id into Mail's search field also fails.. it appears Mail doesn't index this header.
Can anyone help or offer a different solution to linking to a message inside Mail from an external app?

I'm not entirely sure I understand what you want to do, but if you are trying to link received emails to an external database, you can do so with Applescript, assuming your database app supports it.
AppleScript support in Mail offers the following message properties (copied from the "Message" suite in Mail's Applescript dictionary):
id (integer, r/o) : The unique identifier of the message.
all headers (string, r/o) : All the headers of the message
background color (blue/gray/green/none/orange/other/purple/red/yellow) : The background color of the message
mailbox (mailbox) : The mailbox in which this message is filed
content (string) : Contents of an email message
date received (date, r/o) : The date a message was received
date sent (date, r/o) : The date a message was sent
deleted status (boolean) : Indicates whether the message is deleted or not
flagged status (boolean) : Indicates whether the message is flagged or not
junk mail status (boolean) : Indicates whether the message has been marked junk or evaluated to be junk by the junk mail filter.
read status (boolean) : Indicates whether the message is read or not
message id (string, r/o) : The unique message ID string
source (string, r/o) : Raw source of the message
reply to (string) : The address that replies should be sent to
message size (integer) : The size (in bytes) of a message
sender (string) : The sender of the message
subject (string) : The subject of the message
was forwarded (boolean) : Indicates whether the message was forwarded or not
was redirected (boolean) : Indicates whether the message was redirected or not
was replied to (boolean) : Indicates whether the message was replied to or not
As you can see, this gives you access to just about any message property you could need for the database. You wouldn't need to tell Mail to search for the message; you could refer to it directly by its ID (or message id string) in its mailbox.
I have done something similar using an older version of Filemaker Pro (v6). I store 'calculated' scripts in the database along the lines of this pseudo-code:
Tell app "Mail" to open message {ID field} of mailbox {mailbox field} of account {related:account field}
... and have Filemaker execute them via a button when I need to open the record's message in Mail. This works very well for my purposes, which may be different from yours. (Note that the pseudo-code won't work as written; it is meant only to convey the idea involved.)

HELP: I need to link a PDF within PDF and be able to open and return to original PDF

I have a master PDF and have attached 7 supplemental PDF documents. I created "click here" icons and used the steps below so that the linked document would open. The problem is, once I open the supplemental PDF, it closes the original master. I would like to close the linked document and return to the master view. Is there a way to do this?
Or is there a way to do this from InDesign? I created master file in InDesign and exported as an Interactive PDF. I created the buttons and linked them to external files. This works great as long as the master PDF and the links are all in one file, but that is a pain to send to a viewer. Ideally, I want to be able to send the master PDF to a viewer and not have to send a links folder. Is there a way to embed the supplemental PDFs into the master so that they are all combined into one file AND have the ability to use buttons to call up one of the attachments, close, and return to the original?
Thanks in advance!!

I want to do the same thing that the original poster of this question wants to do. I haven't worked extensively with Acrobat so am finding by trial and error the several ways PDFs within PDFs can be accomplished. I'm using a trial version of Acrobat Pro X and have experimented with three options.
1 - I've created a Portfolio and am impressed with what that can do, though I think it may be "overkill" for the current size of my project.
2 - I've also tried creating this project as an index but discovered that the links I'd created in the original docs didn't work when I moved the index and its contents (keeping the file structure the same). I presume this means the links are absolute? I also don't understand how it is that users search a .pdx file, or how to present what I want to be the original opening PDF of indexed docs.
3 - I've also thought to create one PDF with attached PDFs, so I'd like to have you expand on your comment about creating a master document and attaching documents to it.
The specifics of my project are these: I have created a master directory that contains approximately 120 links. Most of the links are repeated three times (users can find in the directory the item they need in three different ways: alphabetically, by application, or by module; hence each item listed once in each of three categories). I want to make that directory the "master" PDF that users open first, and then locate within that PDF the 5-8 PDF documents that contain all of the places to which the directory links. I want the "master" directory to be self-contained and completely "portable" as far as all of the documents and links are concerned so that when I make the PDF available from our website users can open the master from there or copy it and have all of the docs they need with all of the links intact. I think I prefer that all docs open in new windows, since returning to the original doesn't seem very user friendly in Acrobat (I like the tabs feature in FoxIt when multiple PDFs are open...).
I'd like an opinion about the best way to accomplish what I need to do, and am also wondering whether there are other options I am unaware of. BTW, the reason we've decided to document this whole project in PDFs rather than HTML is because this project contains a big number of tables, which do not look consistent across various browsers (i.e., most of our tables look fine in IE and Firefox, but awful in Google Chrome...). In researching my issue on the Acrobat Windows forum I see that rendering tables in Acrobat is also an issue that seems to be unresolved.
Thank you!

Need help with Responsive HTML5 screen layout in RoboHelp HTML 11

I have a few questions/issues regarding screen layouts for Responsive HTML5 output in RoboHelp HTML 11.
First off, I decided to just use the Theme1_Standard layout that came with the program (only other default option was Theme2_Government) and started customizing the layout. I originally added a company logo to the 'Header' component in the Customization dialog, but have since decided to remove it. I can't seem to do this from the dialog, so I tried just deleting the image file from the whole project. The file is gone, but the logo is still there. This is only displayed in the header when a topic is displayed, it does not appear in the header at the TOC, Index, Search screen, etc. How do I get rid of this???
Secondly, the text in the header for the topic screens appears differently than the one on the screens for the TOC, Index, Search, etc. In the former of these, the header is displayed in maroon text in a much smaller font, similar to that used in the topics. In the latter, the topic is displayed based on what I configured in the Layout Customization dialog; much larger in white text on a black background. In each case the heading text serves as a link to the default display topic shown when the help file is launched, which is fine. However, how do I get the header to be consistent across all screens (topics and TOC, Index, etc. alike)???
As a result of these issues with the Theme1_Standard layout, I'm trying to import a different Responsive HTML5 screen layout than the two provided within RoboHelp HTML 11 (Standard and Government). I did some digging in the program help and found another layout I'd like to use (Theme3_Black.zip) at RoboHelp screen profiles and layouts. I tried importing the new layout, but it's looking for a .SLZ file and the only one in the files that came with the ZIP file is SLZConfig.xml, and I don't think that's what I need, though quite honestly, I don't know.
I extracted the contents of the ZIP folder to a folder in the !ScreenLayout! folder within the RoboHelp project, but when I open the project, I don't see Theme3_Black as an option. I need to figure out how to import this screen layout because the color scheme matches the one used in the program for which I am writing the help. How do I import and apply this other screen layout???
Any tips, tricks, or guidance on any or all of these items would be GREATLY appreciated.
Thanks much in advance,
Dave

Item two of the original post is also something I am having issues with:
"Secondly, the text in the header for the topic screens appears differently than the one on the screens for the TOC, Index, Search, etc. In the former of these, the header is displayed in maroon text in a much smaller font, similar to that used in the topics. In the latter, the topic is displayed based on what I configured in the Layout Customization dialog; much larger in white text on a black background. In each case the heading text serves as a link to the default display topic shown when the help file is launched, which is fine. However, how do I get the header to be consistent across all screens (topics and TOC, Index, etc. alike)???"
We have the text toggle between red, white and blue depending upon the topic selected. In the customize Selected Layout we have the title color set to white. It seems to think that it is a link and I would like to know how I can force the text to be white and to stay that way no matter which topic is selected.

How do I code relative links as function parameters within Templates?

I am a newcomer looking for best practices for a "How Do I?" properly code relative links as function parameters within an Adobe template (DWT) which accomodates page creation at 2 different level of folders. Dreamweaver doesn't appear to handle auto-correction of relative links as function parameters as far as I can see. It's not clear to me what the best practice I should be following. While this is not exactly a SPRY question, I am hoping that someone using the Spry.Data.XMLDataSet had already found the best practice to use.
My Site
-- Multiple pages at this level and the parameter needs to be "_includes/UnitSideNavigation.xml"
SubFolder
-- Other pages at this level. and the parameter needs to be "../_includes/UnitSideNavigation.xml"
And this is the particular code snippet within a non edtable template area I would like to work for 2 levels of pages created from the template.
<script type="text/javascript">
var dsItems1 = new Spry.Data.XMLDataSet("_includes/UnitSideNavigation.xml", "/links/firstlevel");
var dslinks = new Spry.Data.NestedXMLDataSet(dsItems1, "secondlevels/secondlevel");
</script>
My environment is Windows/Vista using latest CS4 dreamweaver.
Any pointers appreciated. This is learn time for me. Hope I have made myself clear. Andy

I use serverside includes instead of DWT for exactly that reason. Not only that, if you change anything within the template you must re-upload all of the files affected by the change; only the modified include file needs to be uploaded.

Need info on Accessing portal services within a Web Dynpro application

Hi,
I need information on Accessing portal services within a Web Dynpro application.I want to explore this topic.Can anyone give useful links?
Thanks in advance.
Rajani N

Hi
how to reference a portal service with web dyn pro ?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/how%20to/how%20to%20access%20a%20portal%20service%20within%20a%20web%20dynpro%20java%20application.pdf
http://help.sap.com/javadocs/NW04S/current/wd/com/sap/tc/webdynpro/clientserver/portal/WDPortalUtils.html
Best Regards
Jakub Krecicki

Is it possible to link to specific files on a server from within a pdf?

Hi all,
Is it possible to create hyperlinks to a specific file on a Windows server from within a pdf?
Let me explain further, I am working on a Mac trying to create hyperlinks from within InDesign to specific files on a Windows server. I am exporting the file to pdf, along with the hyperlinks, which look correct when I click on them from within Acrobat.
On Windows, the links will read as \\servername\directoryname\filename so this is exactly how I enter it as the hyperlink. When I view the hyperlink information in the resulting pdf from within Acrobat, it still looks correct as \\servername\directoryname\filename but when I try to click on it from the Windows side OR the Mac side, the link doesn't work and gets changed....the slashes revert to the opposite direction and the whole link gets messed up. I am trying to figure out if the cause is InDesign, Acrobat or whether this can even be done? Of corse, I never have issues with normal URLS.
What we are trying to do is set up an internal catalogue for the company of all our materials. (Everyone works on Windows)
Should I try to create the links from within a Windows version of Acrobat... do you think that will make any difference?
Thanks in advance for your help:)
Very much appreciated!
Christine

Thank you for your help...very much appreciated!
Basically, what we needed were for the links to be static and not relative, and they were mainly for Windows users. What finally worked was creating the links from within a Windows version of Acrobat. We plan to email the final pdf to several employees around the word (we are an international company) with all the links intact. Once they were logged into our network (vpn'd in) the links would still be valid no matter where the document was located. The trick is to change the start of the link to a specific IP address (the server address) when you are setting it up in Acrobat. I hope this makes sense and is helpful for everyone else out there:)
(P.S. This works for Windows users only though and cannot be done via the Mac version of Acrobat. I can set things up within the Mac version of Acrobat so that the links will work as long as the document resides in the same location on the server... the advantage to doing it THIS way is that it will work for BOTH Mac and Windows users.)
Thanks again,
Christine

Need a link for FF sent to my email. The link is not showing up on my IE page on my new computer in IE 8 or IE 9

Need a link for FF sent to my email. The link is not showing up on my IE page on my new computer in IE 8 or IE 9

Did you set up virtual pads to assign the Simmons kit in layout mode? In layout, select the group controls tab in the screen control palette. Select the desired pad group(8, 12, or whatever) and drag it onto the layout area. Select a pad and press assign in the screen control inspector. Tap on a Simmons pad and it should be able to learn the pad assignment and note number. Repeat for the other pads. Hope it works for you.

I need to link to a screen within a movie from outside the movie

Similar Messages

Maybe you are looking for