I need to load 10.9.3 combo. I loaded 10.9.4 instead. How can I fix this?

I run Protools.. It does not work with 10.9.4 I forgot to check compatibility before I updated OSX I need 10.9.3 Combo update
I cannot load that as the message says I can't. The only help I've seen involves time machine back ups- which i don't use, or erasing the HD.
Isn't there ANY other way to switch versions?
I have a 2008 iMac so i started with 10.4 or something
actually i have one old time machine back up, but it won't let me restore because that OS is not on my computer.
HELP!

Why do you need 9.3 and not 9.4?

Similar Messages

Firefox opens but no content is shown, url says the website but the tab does not load up and says '(untitled)'. how can i fix this?

firefox opens but no content is shown, url says the website but the tab does not load up and says 'untitle'. how can i fix this?
== This happened ==
Every time Firefox opened
== after norton asked me to restart my laptop. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; eSobiSubscriber 2.0.4.16; .NET4.0C)

Hi,
Unfortunately we had a data base error today and lost some user accounts when we had to go back to our backups. If you have started this thread, your's is one of those. Since we can not recreate your account, please sign-up for a new account here to reply to the forum messages:
https://support.mozilla.org/users/auth
You can use the same username and email address as before. We are very sorry for the inconvenience.

Computer loading pages too slow. How can I fix this?

Computer loading pages too slow. How can I fix this? When I go to iMac Manuals a gey/black screen appears. What is going on with this?

Unfortunately you haven't provided any useful information, such as what iMac you have, which version of OS X is installed, the capacity of the HD and how much is still available, etc...
Please complete your profile so we can begin to assist you, without that critical information we are guessing.

I can't video chat, I send the request, and te video just load and load, never turns on. How can I fix this?

Hi,
I start to use iChat, Ican chat normally, but when I tried to make an video call with my friend, it doesn't work.
I send the invite, and than my webcam turns on and a window is open, when i see my face, and start loading and i can't connect with my friend, it load eternally and never works, when i try, the results are always the same. I have an MacBook Pro...How can I fix this?

HI,
iChat uses different internet ports to do different tasks.
If you have the Mac Firewall On then this should allow the ports the app is Using on an Incoming basis.
These same ports also need to be allowed in your router.
If the device has it use UPnP if you can.
This allows the app to state which ports it wants to use and also for multiple devices to use the same ports.
(It is needed for iChat Screen Sharing that involves a random port that cannot be opened in other methods)
Can you also open the Connection Doctor (Video Menu of iChat) and say what it says on each tab ?
7:57 PM Sunday; March 24, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

It takes a full minute and a half for the Mac App Store Application to load on my iMac. How can I fix this. No other applications launch so slowly.

Whenever I click on the Mac App Store icon in my dock, I get the spinning wheel for a minute and a half. It then loads. While in the App Store application, it takes a minute and a half to switch from "featured" to "top charts" for example. Nothing else on my 24" iMac takes that long to load. Any ideas on how to fix this problem?

Drag the App Store app from the Applications folder to the Trash. Drag the App Store icon off the Dock. It should go "poof"..
Download and install the v10.6.7 combo update.
http://support.apple.com/kb/DL1361
That should re install the Mac App Store for you. It's ok to do this even if you are already running v10.6.7
If the combo did not re install the MAS for you use Pacifist to extract the MAS from the v 10.6.7 .dmg folder.

Sometimes, when I open a page and quickly click to another tab, that page will load in that tab instead; how can I stop this?

''duplicate of https://support.mozilla.org/en-US/questions/1048541''
This is irritating.

A new tab will always open at the end of the current open tabs. In order to load a tab in the background try to right click and select "Open in new tab"
(Note you may need to turn off the Tab preference that switches to it immediately)

I have done the update to Firefox 7 yet when I open Firefox it tells me I need to update to the newest version which I just did, how can I fix this?

I keep my Firefox up-to-date at all times but the last few weeks Gmail has been telling me that I am using an older version which it no longer supports even though I have the updated version. I was notified that Firefox could be updated to the newest version, which I did. After the update when I opened Firefox it told me that I needed to update to the newest version which I had already done. How can I fix this?

Glad to hear it

When I try to load an update it says Need 3.0 or later loaded. I have V3.1.2 loaded. How can I fix this

When I try to load an update for aperture 3.0, I get an error message " you need 3.0 or later loaded". I have V3.1.2 loaded. How can I fix this?
Thanks

Is your Aperture application installed in your "Applications" folder, or did you move it to a subfolder? If you moved it, put it back into the "Applications" folder. Also check the name. If you renamed it, change the name back again to simply "Aperture" without any additions. Otherwise will the updater not recognize your current installation.
Regards
Léonie

No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?

No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?
I've tried safari, chrome, firefox...I've cleared the cache as well. This has been going on for several months and used to be tolerable as it was not every website. Now it has become every website and is impossible to deal with. My roommates computer and my cell phone connect fine. I'm fully connected to the router yet websites don't load. I'm using 10.7.5. Thank you!!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

HT1723 Recently I bought a MacBook Pro, the first time I entered a disc into the disc dive it wouldn't load up in Itunes - just kept freezing; and the disc drive made a lot of noise, how can I fix this?

Recently I bought a MacBook Pro, the first time I entered a disc into the disc dive it wouldn't load up in Itunes - just kept freezing; and the disc drive made a lot of noise, how can I fix this?
I've had my mac for less than a month and for the first time I put in a disc. I can hear a laser sort of noise as well as the disc flapping about or a motor sort of sound? Sounds really bad to me :/
Someone please help!

Sounds like a hardware issue.
Did you buy the system from Apple? If so how recent is recent? If it is new you have 14 days to return it, not sure what the situation is with refurb systems. If it is over 14 days you should still have warranty support make an appointment at an Apple Store or contact Apple support.
If you bought it from someone other then Apple you will need to contact them.
good luck
regards

When typing an address in the location bar and pressing enter, nothing happens and the site does not load. How can I fix this?

When I type a new URL in the address bar (or location bar), and I either type the complete URL or select from the drop down list, nothing happens. I hit enter, and the website does not load in the current tab, new tab nor in a new window. Exactly the same when I hit the green arrow to the right of the address bar. I am using Firefox 8, and all my add-ins are up to date.
It has been working before. The setting to get Firefox to open new pages in a new tab from the address bar is there, so it should open a new tab. But I get nothing at all!
Please help, how can I fix this?
Thanks,
James.

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

My iPad 2 shows I have 7 apps that need to be updated and when I go into my App Store it won't pull up anything for my updates how can I fix this????

My iPad 2 shows I have 7 apps that need to be updated and when I go into my App Store it won't pull up anything for my updates how can I fix this????

It seems Apple is having some issues at their end. There have been hundreds of posts on the forum with the same problem.

So i got ios 7 in beta on my ipod touch, now several months later, it says my ipod touch needs to be activated. it wont activate over wifi or when connected to itunes. how can i fix this?

so i got ios 7 in beta on my ipod touch, now several months later, it says my ipod touch needs to be activated. it wont activate over wifi or when connected to itunes. how can i fix this?

You say you have iOS 7 beta. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
Otherwise you are on your own since you have a bootleg copy
PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog

ITunes suddenly mentions that my iPhone cannot be synced because it needs 6.55 additional GB, although my phone still has 2 GB free of space. How can I fix this?

iTunes suddenly mentions that my iPhone cannot be synced because it needs 6.55 additional GB, although my phone still has 2 GB free of space. How can I fix this?
iCloud is off on both my phone and my computer.

It is saying that the iPod does not have enough free storage to sync all the items yu have selected to sync to the iPod. You need 2.48 GB more free on the iPod. You need either to select less to sync or delete some content form the iPod.

I reinstalled iPhoto on my MacBook Pro. It opens, but only shows the loading bars and does not allow me to add pictures. How can I fix this?

I reinstalled iPhoto on my MacBook Pro. It opens, but only shows the loading bars and does not allow me to add pictures. How can I fix this?

Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa.

When I try to back up my iPad to the computer it gives me a message saying it can't sync and cannot back up because there is not enough room in the iTunes library. How can I fix this? I need to back up the iPad content so I can restore it to a new 1

when I try to back up my iPad to the computer it gives me a message saying it can't sync and there is not enough room in iTunes library. How can I fix this? I need to back up iPad content to restore on a new one

juliefrombaton rouge wrote:
when I try to back up my iPad to the computer it gives me a message saying it can't sync and there is not enough room in iTunes library.
Pretty sure it doesn’t say there is not enough room in iTunes library because it is not backed up to the iTunes library.
What is the exact message?

I need to load 10.9.3 combo. I loaded 10.9.4 instead. How can I fix this?

Similar Messages

Maybe you are looking for