I need to maintain a temperatur​e profile for my process.Ca​n i use PID control for this applicatio​n?
Hi all,
I need to maintain a temperature for my process.Can i use PID control vi's for this application?
I have NI-PCI 6023E DAQ board.Should I need any other hardware components???
Any help in this regard is highly appreciated.
Thanks,
radhika
Hi,
Thanks for your reply.
I do have a temperature sensor and it is read by the DAQ (NI 6023E) .
Also i have a voltage input to the program which has to be controlled in order to control the temperature.
So , I am using a PID , the output of the PID should control the Voltage input so that the temperature is controlled.
Can I give the voltage input and the temperature to the PID through the DAQ and just use one more channel in the DAQ to get the output from the PID.Will that work???
I am not sure why you have mentioned SC2345,SCB68.
Thanks,
radhika
Similar Messages
-
New OS causing major problems. Forced to purge data and wipe iPad. Now my computer has changed. My software has changed on iPad. Tried using old backup from earlier date but Trojan horse software created by Apple has decided to stay.
Have 16gig. IPad 2 bought December 2012 for Christmas but according to Apple I am out of Apple care and would need to pay for support. When has 1 year apple care become 9 months?
Wasted an entire day trying to purge my older computer which is linked to this iPad. I reset my iPod and ended up deleting and wiping clean but it's not factory but the aggressive 7.2 which returned. I want my old OS back. Their software has destroyed my ability to use my iPad for the purposes I intended it for.
I don't do social media other than Pinterest and I want the fluffy stuff gone. They need to forget trying to get me into the clouds and fix this iPad so I can use it for real world applications.
You can only keep resetting so often. There has been hardware issues almost since purchase because it crashed several times even before updated fiasco.
Help please.Ralph9430, thanks for responding but the fact that they don't support AppleCare on a unit less than a year old despite being an older version is wrong.
It suppose to be from date of purchase so their not taking responsibility for the maiming of people's computers and their subsequent arrogance in not removing it is going to their undoing.
We have purchased iPhones, Mac Pro, iPad, iPod touches in the nano, shuffle and touch versions in the past as well as the more solid 80gig version. I
I am still using 3G model phone and I can no longer find apps to use with it because Apple feels I don't deserve new apps.
My children are using iPhone 4 and my daughter was seeking to upgrade to the newest model when it becomes available. They are social, I am not and I deserve the software I paid for. It should always be an option.
I can tell you that this particular oversight is causing me to look elsewhere for future purchases and I will not be recommending Apple to others as I have in the past. -
If you do have any suggestions, where can I find it? The only place I know of is the http://www.mozilla.com/en-US/firefox/all-older.html web site and you can only get version 3.6.16 there and it's NOT optimized for Yahoo!. Please help!
Yahoo! keeps sending me the following message in a box on my screen along with the links to Firefox 4 and IE : Attention: Please upgrade to the latest Yahoo! optimized browser to ensure the best Yahoo! experience. But, as I stated in the question above, I cannot use Firefox 4 yet because it does NOT support Norton 360. Plus, I don't trust IE8 to use Facebook!
Thanks for any help you can give me! Your very prompt attention to this question is greatly appreciated as I am sort of at a standstill before moving on with my work.
Regards,
Christine
(Running Windows Vista Service Pack 2)Symantec have released an update for Norton 360 to make it compatible with Firefox 4, for details see http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
-
How to maintain List Of Values (LOV's) for BPEL Processes
We are integrating two systems.Source and destination systems store data in different formats. For example State is stored as a string in source and its stored as an number in destination system. In BPEL we are trying to transform this information and send it to destination system so that it understands the incoming data.
A sample of transformation we need to do is as shown below.
State in Source Sate in Destination
Texas 1
Nebraska 2
But we have so many fields that we need to transform as we are doing for State.
What is the best way of handling these domain mappings in BPEL. I want to know is there any efficient way we can handle this in BPEL as we do in J2EE applications(Maintaining them in Domain tables and making them available for all functionalities).
We are looking to hold all these domain mappings at one place and use in all the processes we design.Can anyone suggest a better way to handle this for BPEL processes.Hi,
I am using the lookup-xml for maintaining list of values.But dont know whats the problem unable to get the output.
Example: this is just a sample one which i am testing.
My xml file is placed in c folder with the name "StateList.xml" which contains the following info.
<?xml version="1.0"?>
<Countries>
<Country><Abbreviation>CO</Abbreviation><FullName>CO</FullName></Country>
<Country><Abbreviation>CT</Abbreviation><FullName>Connecticut</FullName></Country>
<Country><Abbreviation>ID</Abbreviation><FullName>Idaho</FullName></Country>
<Country><Abbreviation>NJ</Abbreviation><FullName>New Jersey</FullName></Country>
<Country><Abbreviation>AP</Abbreviation><FullName>Andhra Pradesh</FullName></Country>
</Countries>
And in BPEL, in the transformation i am taking the input and assigning this lookup value to the output variable as follows :
<ns1:result>
<xsl:value-of select="orcl:lookup-xml('file:/c:/StateList.xml','/Countries/Country','Abbreviation','FullName',/ns1:HelloWorldPavanaProcessRequest/ns1:input)"/>
</ns1:result>
But unable to get the result.Kindly help me out in this.
Regards,
Pavana -
I am looking to control a 4-way hydraulic solenoid valve. Do I need a PID control toolset, or can i control the system through my 16E4 daq card and scxi chasis
I think you're asking 2 different questions.
The PID control toolset is for using PID loops for control; it's just software.
The DAQ card and scxi chassis are hardware. If you have the appropriate signal conditioning cards in your chassis to control/monitor your solenoid valve, then you can run a PID loop.
I believe the simple answer is: the PID control toolset is the best way to do control, but there are simple PID VI's (even on this website) that you can download and use for simple control.
Mark -
I need to know what gig to get... I want to use the ipad for my college textbooks to take them to class on it. How many etextbooks would the ipad hold?
Caveat to the above: books that have a lot of pictures or graphics can be quite large; many megabytes. If you can find out from your college program what books you'll need, check to see if 1) they're available; many textbook publishers have yet to provide textbooks as e-books and 2) if they are available (from one of the e-book providers; you can use Kindle, Nook and Google books on your iPad in addition to Apple's iBooks) how large they are. Then you can add the sizes up, figure out what else you might want on your iPad (movies, for instance, take up a lot of space) and determine what capacity you'll need. When it doubt, buy more capacity than you think you'll need; an iPad can't be expanded later if you run short.
Regards. -
Hi All,
I have a very basic question regarding Distribution model.
My scenario is IDOC-->File ( SAP R/3 --> XI). So all I am trying to do is send the IDOC frrom R/3 to XI. ( Within XI I am going to do an FTP to the 3rd party file server)
I have created a distribution model, but was wondering if I really need to create one as message is going from R/3 to XI and not from R/3 to another R/3.
Please help let me know If I need to distribute this model to XI or to SAP production sytem or I do not need to duistribute at all for this scenario.
Thanks
ShirinHi,
if you create partner profiles and port via t.code.
i hope, it's not required to maintain Distribution model.
please check the below points.
Configuration Steps for Idoc to File Scenario.
This is complete step by step document for configuring the idoc to file scenario along with ALE Settings
To Configure the IDOC TO FILE SCENARIO, SETTINGS IN SAP-XI
STEP 1:ALE SETTINGS IN SAP-XI
We need to do the following settings in XI
1) Create an RFC Destination to the Sending System in transaction code (SM59)
a) Choose create
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#
e) Enter the Gateway host as same details above SID/URL
f) Gateway service is 3300+system number#
g) In the Logon /Security tab, enter the client user & Password details of Destination system
h) Test the connection and remote logon.Both should be succesful
2) Create Port Using Transaction Code IDX1
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client
d) Enter the RFC Destination created in SAP R/3 towards other system
e) Save
3) Load Meta Data for IDOC Using transaction Using Transaction (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1
SETTINGS IN SAP R/3
We need to do the following settings in R/3
Logon to Sap R/3 System
1) ALE SETTINGS TO POST IDOC OUT OF SAP-R/3 ***********************************************************************
a) Create RFC Destination using T.code in SM59.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#
e) Enter the Gateway host as same details above SID/URL
f) Gateway service is 3300+system number#
g) In the Logon /Security tab, enter the client user & Password details of Destination system
h) Test the connection and remote logon.Both must be succesful
2) Create communication Port for Idoc processing Using Transaction(We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile with Outbound Parameters (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang
Then Save
e) Select Partner no. and LS which were create above
f) Now we have to give some Outbound Parameters.So click on ADD TO Create Outbound Parameter
g) Select Message type
h) Double click on Message Type and Then Enter the details for Receiving port, Pack size=1 and Basic type
I) save
4) In Transaction SALE, Create Logical System
a). Go to Basic Settings-> First Define logical systems
and then assign logical systems
b) Double click on Define the logical systems
c) Give data for your Logicaal System and Name
d) Now click on Save.Here one window may appear just click on Continue.Now the Logical System name is ready
e) Assign the logical system name to the client
5) Create Customer Distribution model in the transaction code BD64
1) Click on the Create modal View button and enter the short text, Technical name etc as shown below
2) Now select the created model view and click on Add message type button .A pop up box appears, enter Sending system, receiving system and message type
3) Save the Distribution model
Generate Partner Profiles
Click on Menu Item u2018Generate Partner Profilesu2019
It leads to the next transaction where in the selection screen you have to provide Model view name, Partner System logical system and execute
Then, you will be intimated about the partners, port creation, and outbound parameters creation
4) Distribute Customer Distribution Model
In the menu item GO to Edit->Modal View-> u2018Distributeu2019 to the destination client
Popup window appears ,press Enter
You will be intimated about the the Modal View Distributed
warm regards
mahesh. -
In smartform : in a table i need to maintain fixed no of rec
.2.in smartform in a table i need to maintain fixed no of records in each page i.e 10 records in each page and after printing 10 records page break has to occur and print them in New page , how to do this can any body help me.in each page i.e 10 records in each page and after printing 10 records page break has to occur and print them in New page , how to do this can any body help me.
Hi,
I dont know if there is any direct way of doing so, but ican suggest a turn around solution.
declare 2 global tables 1. ITAB_10 type ITAB (in which there is ur data)
2. IT_ROW inwhich 2 cloumn (start_pos & end_pos type i)
Now in intialization.
Caluculate no of rows in ITAB.
Say there are 56 rows, then fill table it_row as 1(start_pos) - 10(end_pos), 11-20,...51-56.
Then in main Window, Create a loop on IT_ROW.
in that create a CODE under this loop in which fill ur ITAB_10 from ITAB as per start_pos& end_pos in IT_ROW.
Then create TABLE under the loop, for ITAB_10.
Regards,
Vaibhav. -
Need some help with the colour profile please. Urgent! Thanks
Dear all, I need help with the colour profile of my photoshop CS6.
I've taken a photo with my Canon DSLR. When I opened the raw with ACDSee, the colour looks perfectly ok.
So I go ahead and open in photoshop. I did nothing to the photo. It still looks ok
Then I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
And the colour started to get messed up.
And the output is a total diasater
Put the above photo side by side with the raw, the red has became crimson!!
So I tried the other option, Use the embedded profile
The whole picture turns yellowish in Photoshop's interface
And the output is just the same as the third option.
Could someone please guide me how to fix this? Thank you.I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
always use the embedded profile when opening tagged images in Photoshop - at that point Photoshop will convert the source colors over to your monitor space correctly
if your colors are wrong at that point either your monitor profile is off, or your source colors are not what you think they are - if other apps are displaying correctly you most likely have either a defective monitor profile or source profile issues
windows calibrate link:
http://windows.microsoft.com/en-US/windows7/Calibrate-your-display
for Photoshop to work properly, i recall you want to have "use my settings for this device" checked in Color Management> Device tab
you may want to download the PDI reference image to check your monitor and print workflows
and complete five easy steps to profile enlightenment in Photoshop
with your settings, monitor profile and source profiles sorted out it should be pretty easy to pinpoint the problem... -
I need to maintain a default delivery block and shipping conditions for a particular sales area for a returns sales document(va01-Z31) which we use
it should come has a default.
i need to do the changes for existing returns document type
to my knowledge it cannot be possible with standard(the default settings in sales doc type. will be of not useful as they apply to all sales areas and i cant maintain a new doc and assign to that sales area)
pls let meknow your inputs
regards
sujanhI
We have a z table we are maintaining in addition feilds to the table which is inserted in program -
Do I need to add a 802.1x profile to allow others to use my wifi?
Before I upgraded to Mountain Lion visiting family members were able to use my internet. Now some cannot even though I have given them my password. Do I need to add a 802.1x profile? Does this mean my router?
I cannot amend my initial post as I incorrectly described the display so here is an update.
As far as I have read and experienced with purchasing two such displays, this model came with a Mini Displayport to DVI adapter not a HDMI to DVI adapter.
I think I need an HDMI to Mini Displayport adapter so I can use the Mini Displayport to DVI adapter that came with the display.
Here is the display:
Apple Cinema Display 23-Inch Aluminum
The Apple 23-Inch Cinema Display (Aluminum) (M9178LL/A), is designed match the Power Macintosh G5 and PowerBook G4 models. It features a 23-inch (1920x1200) wide-format active-matrix LCD display with 16.7 million colors, 170 degree viewing angle, and a response time of 16 ms. It sports dual FireWire 400 and dual USB 2.0 ports on the back of the display.
Picture is here if link is allowed:
http://www.sellyourmac.com/mac-product-guides/cinema-display.html
http://www.sellyourmac.com/images/stories/mac-guides/apple_cinema_display_20_inc h_aluminum.jpg -
Hi All,
We are developing a SAP UI5 application and we deploy our components in Gateway System as BSP application.
The question now is:::
We have 3 screens.We need to use our application by share point portal.
we will be giving the respective URL's (i.e index.html) to portal team and they will be integrating it through URL iViews
At a glance users can only see a single screen once they login to application. through portal
This will be taken care by Portal Team.
Do we need to maintain the end users on Gateway system for accessing the application?
We have SSO feature.
Could you please let me know the possible ways?
Thanks in Advance
Regards,
SatyaAlthough I will not advise it, you can turn off authentication in SICF. Go to the service node for you application, and "hardcode" a service user.
Please check if this is compatible with your license agreement, because I seriously doubt it. -
BTXTAXT - Why do we need to maintain this table
Experts,
Could anyone explain why do we need to maintain this Tabe (BTXTAXT) when a new Tax type is added.
I haven't maintained that still taxes are calculated properly for the new tax type87.Hi,<br>
It is for "Tax Category in BSI". This is not to be maintained by us ANY TIME and NEVER should be.
The tax type already maintained in BSI and in SAP in the T5UTT table.
This is for SAP to communicate to BSI internally.
Good luck<br><br>
Thanks,
Amosha
<br><br>"Known is a drop & unknown is an OCEAN!" -
What is a inforecord? why do we need to maintain that?
Hello,
what is a inforecord? why do we need to maintain that?
is it automatically created or manual?
Thanks,Info Record is used for storing the purchasing information about a vendor and a material as the master data at purchasing organization and plant level.
Info Record consists of information that cannot be captured at the general vendor or material master level. Info record allows buyers to quickly recognize which materials a specific vendor can supplier, and which vendors can supply a specified material.
Info records are divided into General level and Purchasing Organization level.
General level:
Vendor Data u2013 e.g. vendor material number
Origin data u2013 e.g. country of origin
Order unit u2013 However, the variable order unit should be activated if there is different purchasing order unit with base unit of measure.
General level Info Record text
Purchasing org level
Control data - planned delivery lead time, standard order quantity, minimum order quantity, shipping instruction, delivery tolerance
Condition data - price conditions, price UOM, scales etc
Last Purchase Order Number and date
Purchasing level Info record text
Prerequisite master data of setting up info record
For info record of inventory item, a material master record and vendor master must exist in the system.
It is also possible to create info record of non-inventory item, material group and sort string key are required, and this kind of info record is used in external processing, where info record number will be linked with a production order.
Info record Category
- Standard: Specifies that the info record is used in connection with standard purchase order.
- Subcontracting: Specifies that the info record is used in connection with subcontract order (item category L). The price should be the value added price which does not include the component value. Consignment: Specific that the info record is used in connection with consignment order (Item category K)
- Pipeline: Specifies that the info record is used specifically for pipeline withdrawals.
Key fields of Info Record
u2022 Planned Delivery time u2013 This is calendar day including transit lead time. Note: For Info record of STO, the PDT is transit lead time only.
u2022 Standard QTY u2013 Standard Purchase Order QTY
u2022 Minimum QTY u2013 Supplieru2019s minimum sales QTY
u2022 Shipping instruction u2013 ship mode of this material from this vendor
u2022 Confirmation Control key u2013 Indicate if a confirmation (AB) and shipping notification (LA) is expected.
u2022 Delivery Tolerance u2013 can be set with certain % to close PO short and allow over deliveries.
u2022 Purchase Order Text u2013 will be copied over to purchasing document as Info record PO text
u2022 Tax Code u2013 please do not enter tax code of affiliate info records, otherwise, it will cause error in invoice posting.
Prashant -
Need to maintain same data in ECC and MDM
Hi ,
Could you please tel me why we need to maintain same data in MDM and ECC seperately.
Regards
RamyaHI Ramyadixit,
It is important to understand that MDM and ERP do not replace eachother rather complement each other.
Using SAPu2019s ERP suite as the foundation technology for an MDM implementation is problematic because, despite all the positives of ERP, flexibility is usually not associated with SAP systems.
SAP ERP doesnu2019t offer the tools to manage master data in the ways required by todayu2019s complex organizations.SAP ERP isnu2019t designed for active management of critical master data. Specifically, SAPu2019s data matching capabilities are too basic. Its search functions might be good at u201Cexact matchu201D but they are not as strong at the kind of u201Cfuzzy searchingu201D that is so important in uncovering duplicate entries with subtle differences. For the same reason, users are far more likely to create new duplicate customer records in SAP, and thereu2019s no way to create a u201Cgolden copyu201D of master data for use across multiple heterogeneous systems, or to maintain survivorship rules for overlapping data from multiple systems.
These problems are all compounded when you have more than a single SAP instance, or different ERPs altogether, which is a very real occurrence within large corporations that have grown through mergers & acquisitions. Even without multiple ERP instances, most mid-size and larger national firms are likely to pull data from many different systems. In fact, 10 to 30 source systems is not uncommon, and heterogeneous environments are now the norm. The siloed approach to data management whereby customer-facing data is in one system, product data in another, asset data in a third, and so forth, really complicates the integration of processes, data and workflow.
A dedicated MDM hub provides a multitude of benefits not attainable with an SAP ERP-based master data approach. First, a dedicated MDM system is just that -- dedicated to delivering the best possible manageability of your master data across the enterprise, and not just within your ERP technology stack. The focus of any high-quality, enterprise-grade MDM hub implementation is going to be on getting master data right; creating a single source of truth, with each distinct customer, product, etc. represented only once in the hub. This means you can maintain accurate, complete, timely and consistent master data through both data governance and hub technology, with robust data quality and matching capabilities.
MDM and ERP need to coexist for instance as one solution does not replace the other. From an investment perspective, it is important to leverage existing technologies such as data quality, extract-transfer-load (ETL) and data integration tools, middleware, business process management and workflow.
To summarise, the top five reasons not to master your data in SAP ERP are:
1. SAP ERP isnu2019t flexible enough.
2. Master data is different and canu2019t be proactively managed within an SAP ERP system.
3. SAPu2019s ERP products werenu2019t designed for active management of master data.
4. Mastering data in an ERP system is much more difficult with more than one instance or when different ERPs are used together.
5. An MDM hub creates a workspace between an organizationu2019s transactional and analytic systems meaning they fix it once and then extend it for use in back office systems and the data warehouse.
Hope it helps!
Thanks,
Ravi
Maybe you are looking for
-
Can't edit my credit card information in billing
I can't edit my credit card information in billing from the itunes store
-
MSI NX6200AX-TD256H S-Video output only
I have bought MSI NX6200AX-TD256H card. I wasn't able to switch it to the composite video TV out mode, as I was used to in previous models ( the driver offers just S-Video, Automatic and Component modes). So does this card really lack the composite v
-
IPhoto 11 - older photos only show as thumbnails
I have upgraded both my MacBook Pros to iPhoto 11 and now some of my older photos only show as thumbnails and won't go full screen. I just get a triangle with a "!" on the screen.
-
ITunes wont down load 4.0 update for iPhone 3GS
When I try to download the update it just says problem downloading, timed out..... HELP?!?!?!?
-
Automatic insertion of comments in ABAP code
Hello Experts, Is there any tool or report, that will automatically add comments to existing custom codes. TABLES: KNA1. will be changed to : TABLES: KNA1. "Customer Master Regards, Anubhab