I need to make my ipad2 3G
I need to make my ipad 2 3G?
You need to contact att or verizon and ask them set it up. You cant make your ipad 3g with contacting and setting it up to a network, not a wifi network, but a telephone service that supports the ipad.
Similar Messages
-
I need help,,upgraded to ipad2, my HP laptop had major issues and had to be restored b4 I could back up and save any content on the hard disc. So i havent backed up my iPad2 or saved my iTunes library.
How do I back up and sync my ipad2 without losing content on my iPad.???
I need really simple instructions as I've had a bad run with my laptop the last month.
I have re-installed iTunes,it currently has no content in it
all my music, photos etc had been saved to a an external Hardrive (phew)so I'm not concerned about losing them during a sync, but how do I sync my Ipad without losing the applications... The last back up saved was in June when I still had an ipad1
I tried to back it up last night but kept getting the prompts something to the effect of "iPad can only be synced to 1 iTunes library, syncing will erase all content and replace with content on this iTunes library".
Help please,, I've already lost endless hours fixing my PC issues,so I'm not game to attempt this issue without guarantee I won't lose everything,need a simple solution that anyone can follow as my brain has information overload!!! Lol
ThanksThis should help you out. I copied this from another discussion a while back. Here is the original discussion link.
https://discussions.apple.com/message/11527071#11527071
This is what is in the discussion. It really doesn't get any easier than this.
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources. -
Do I need to make an appointment to exchange a smashed iPad screen?
Do I need to make a appointment to exchange my iPad2 as the screen has cracked?
Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Cheers, Tom -
Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent
Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I hope I'm in the right place since I was sort of redirected here Recently I have been receiving the message that my startup disc is full and that I need to make room by deleting files. At first I received the message when I left my computer unattended with my virtual machine on, using VMWare Fusion to run Windows. Recently though, I got the message when I left my computer unattended for about 6 hours without the virtual machine running. As an aside, I get extremely nervous when anything freezes VMWare because it is usually a nightmare to get back into Windows if I can at all without calling Tech Support. This new message however, appeared without the virtual machine active, so I was relieved that VMWare most likely was not the cause. After reading a number of Tech Support articles and Community discussion questions and answers, I started wondering if iTunes or the SMC firmware or a combination thereof may be causing the problems. Mind you I know nothing about the SMC stuff because as I said, I am really new to Mac and know very little about computer code or processors or any of that stuff. But I do know that iTunes has recently been giving me some trouble, such as opening on start up and I can't figure out why and messing around with my iTunes libraries. I also read about the SMC firmware and the computer's sleep cycle so that sort of made sense. But I seriously need advice from someone a lot smarter than me. So, before you ask, both iTunes and my SMC firmware are up to date. I'm running a mid-2007 iMac Intel Core 2 Duo Processor with 2.4 GHz of speed.
You may not need all this junk, but in case you do, since the message tells me to make room and delete files, here goes. Now, if I need to make space and delete files, this is where I get confused and it's probably very simple but I'm still a relatively new Mac user and I still can't seem to find all the info about my Mac! I'm not exactly sure how much space I have left on my hard drive. I had to replace my hard drive last December and the invoice says it is a 500 GB 7200 SATA hard drive. For some reason I thought I had more than that. Regardless, System Profiler shows 10.26 GB currently available, 499.76 used; I assume that the used portion includes my partitioned drive that has my virtual machine on it? I may be using the wrong language when calling it that but that's how I understand it as a "partitioned drive". Now, when looking at the System Profiler, under Volumes, Capacity 209 MB writable diskOs1 - I think this my Virtual Machine. I also have three Western Digital drives that I use for Time Machine and for pictures and music; however, as I said, I am still new with Macs and do not fully understand the file structure so there may be pictures on my Mac hard drive that are duplicated on 1 or more of my WD drives but I don't know how to find them or if I do, I'm afraid to delete them. Of these WD external drives, 1 is 500 GB and is full with Time Machine backups; the 2nd WD drive is 3 TB and has 2.18 TB available and is currently being used for Time Machine backups; the final WD drive is 1 TB Firewire and currently has 694.33 GB available.
Any help would be appreciated. Please forgive any inaccurate terms or mis-statements of terminology as I do not really know what I'm talking about as far as the pieces and parts of the operating system; I'm just trying my best to describe what I see.
One more piece of advice that I would appreciate would be recommendations about a good file cleaner, for duplicates, messy file structure, space utilization software; it also needs to be idiot proof software. I have a trial version of Appdelete that I never really used and I have the purchased version of Tune Up My Mac that I haven't spent much time with because I'm afraid I'll delete something I shouldn't
Thank you for your help
MemalynHi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt -
HOW LONG TIME YOU NEED TO MAKE GPS TO WORK WITH OV...
Question to NOKIA:
HOW LONG TIME YOU NEED TO MAKE GPS TO WORK WITH OVI MAP 3.1 in N97?
On all N97 I know and as you can read here in forum the GPS doesn't work usable in N97 and with MAP 3.1.
I believe that this is a software problem because often I get a GPS signal inhouse and in the wood, but from one second to the other N97 lost the GPS signal. And this in the best weather condition under free sky. Sometimes gps signal works for 15 minutes, then the signal will drop every minute or so.
The current position on map is shift (past) abaout 40-50 meters from the real position, so its unable to use.
The calculated speed is always changing between 0 and the current speed.
I have updated phone to de newes software and firmware also to ne newest maps also has hard reseted and reformatet and the problem ist still the same. If I switch off the option "Maps improvment" (which SENDS DATA TO NOKIA!!!) the the drop outs are fewer. But evreytime the position on maps is shift about 40-50 Meters from right position. Is there a mistake in calculation the position? Also the speed is jumping sometimes from 0 to x and back.
CAN NOKIA TELL US WHEN THIS BUG WILL BE FIXED, AND CAN NOKIA OFFER US A REFUND.
I have payed a lot for N97 and alot for the navigation licence and a lot for accesoires and a lot for the traffic security assistance. So I want a working phone! I dint have payed money for e alpha-stadium phone.
If this is realy the quality of nokia phone, then It is the latest phone I have buyed from nokia.
By the way, the phone has many many many many other bugs as described in this forum.
Really bad work NOKIA! :-(
I was so excited with my N95 and now this mess...
NOKIA please answer us forum members, what you plan to do with the N97 bugs. When we can hope that the bugs are gone? Otherwise I will return my phone and want my money back and I sue for compensation.I have no word to disagree with you and hoping that Nokia soon will make some press statement or something else to tell us what they do with their flagship, sorry bugship Nokia N97.
Could be a shame recognize errors, but it's worst not to say nothing ant let the bad news of Nokia N97 spread for internet even if they want to sell a Nokia N97 Mini in the near future.
I understand and supose that we will no have no new version till september because we are in the last week and july and the activity in august decrease really high... but at least someone of Nokia could tell something about this problems and if it's possible all the other problems.
Why Nokia Beta Labs Forum there is a direct contact with Nokia workers, and in discussions is relly rare to find?
Yesterday is history.
Tomorrow is a mistery.
Today is a gift. -
I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?
Hello waitingone,
please try this (all terms are translated from my German programs to my best knowledge):
1. Did the creator of the pdf file enable the import options?
2. See import options: choose an other visibility option for your layer.
3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
4. See trimming: try the different modes there. Often works: "Media".
5. Is the pdf file (eg from Word) correctly created?
6. Is the PDF file protected? >>> no import possible.
7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
Good luck!
Hans-Günter -
Need to make a print button in indesign
hi
I need to make a print button in indesign for a brochure. I have made several buttons by using the create button toll but there is no 'print' option in the list of behaviours.
can anyone help me with this please.
The final output is a pdf and the brochure has a print button on every page.
Can anyone help pleaseYou can duplicate any form field to all the pages you like... to all pages or just some pages.... Forms>Edit Fields>Duplicate
-
i have a line drawing (black on white paper) i have scanned and need to make the white paper transparent, maintaining the line drawing, can i and then HOW can i do this in PS? this is for my business logo. ive used it for years but with a solid background. id like to have it just be the drawing over my photos with a transparent background.
First let me apologize for posting a reply that was only suitable for advanced users. Photoshop is broad and powerful therefore has a huge learning curve. In fact I would state no one knows and uses all of Photoshop. When we first get Photoshop it intimidate us and we're very uncomfortable using it. Many thing are not intuitive there in much learning involved. After some time we begin to know something and we are able to do some thing. Learning become rapid and we start playing in Photoshop. It is very important to play with Photoshop. Playing with Photoshop and asking for help with in forums like this IMO is the best way to learn.
Photoshop Power lies in layers, selection and automation. However it takes knowledge to use photoshop well so most powerful tool you have ins Photoshop is the gray matter between your ears. Most at one time or another want to watermark or put a logo on their image. So its best to automate this process. All run into a problem in the process. "Size" We find our assets vary in size and aspect ratios. Landscape, Portraits, Panoramas and others. This complicates automation. Vector graphics works best when size vary greatly. If you can not work out how to create a vector solution like a custom shape. Create your Logo and watermark large thing scale down better the up. Text scale well for text uses vectors graphics however if you rasterize text it will not scale well.
I do not type or do English well so let me do some screen captures. I can not stress enough how important Black, White, Grays and Blending is when it come to image processing. Become friends with Multiply, Screen, Overlay and Luminosity blending.....
However when there is a white or black background though you can blend them you can not add a style like a drop shadow, emboss or make it invisible setting fill to 0 so only the style is visible. When there is contrast between the logo and background it is easy to separate the two. To select the background and delet it to have the logo with a transparent background. Many tools can be used to create the selection hee I use my action kill white.
Vector Shape would work better for scaling However it would be best to create the logo from scratch in a vector program like illustrator but I never had the resources to justify the Creative suite. I only had Photoshop. Recently Adobe gave me and other a year subscription to the creative suite for our participation here. I still have not installed anything but Photoshop, A while back I found a program that can create vector patf for black and white art work. It will not be as good as using something like illustrator. However vector paths can be edited in Photoshop and cleaned up some. Here is the PSD it 13MB because od the gradient http://www.mouseprints.net/old/dpr/AmPm24-7.psd -
i have an iPhone application already developed and it works great ,now i need to make that same application for my iPad .can someone please tell me step by step instructions on how to make it .
Try the developer's forum:
https://discussions.apple.com/community/developer_forums -
When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.
You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps -
I need help!! My I-tunes won't let me buy any more songs until I confirm that my account..is well..MY ACCOUNT! I can't remeber my security question answers, how do I reset them!? I also need to make a rescue email, i didn't make one when i first made my account, so how do i make it now!? PLEASE HELP ME!
You need to ask Apple to reset your security questions; ways of doing so include clicking here and picking a method for your country, and filling out and submitting this form.
Creating a rescue email requires correctly answering two of the questions.
(96131) -
HP 15-d030nr: What Upgrades Do I Need To Make In Order To Be Able To Use Adobe After Effects CS6?
HP 15-d030nr, what upgrades do I need to make in order to be able to use adobe after effects cs6?
I installed Adobe After Effectss CS6 because I was told by HP Support that it would still work; it doesnt. It is very slow, and locks up bad. What upgrades do I need to do, or am I looking at having to go buy another labtop? Also, can I do these upgrades myself - at what cost?
**HP 15-d030nr**
Hardware
Product Name 15-d030nr
Product Number F5X99UA
Microprocessor 2.0GHz Intel Pentium N3510 Processor
Microprocessor Cache 2MB L2 Cache
Memory 4GB DDR3L SDRAM (1 DIMM)
Memory Slots 2 user accessible
Video Graphics Intel HD graphics
Display 15.6-inch diagonal HD BrightView LED-backlit touchscreen display (1366x768)
Hard Drive 500GB 5400RPM hard drive
Multimedia Drive SuperMulti DVD burner
Network Card 10/100BASE-T Ethernet LAN (RJ-45 connector)
Wireless Connectivity 1x1 802.11b/g/n WLAN
Sound HD Audio with stereo speakers
Keyboard Full-size island-style keyboard with numeric keypad
Pointing Device Touchpad supporting multi-touch gestures without on/off button
External Ports Multi-format digital media card reader for Secure Digital cards 1
SuperSpeed USB 3.0
2 Universal Serial Bus (USB) 2.0
1 HDMI
1 VGA (15-pin)
1 RJ-45 (LAN)
1 Headphone-out/microphone-in combo jack Dimensions 1.11 in (H) x 14.88 in (W) x 10.20 in (D) Weight 4.96 lb Power 45W AC adapter
3-cell 31WHr 2.8Ah lithium-ion polymer battery ID Mech Description Front facing HP TrueVision HD Webcam with integrated digital microphone
**After Effects CC (2014) system requirements and language versions Windows**
Intel Core2 Duo or AMD Phenom II processor with 64-bit support
Microsoft Windows 7 with Service Pack 1, Windows 8, or Windows 8.1
4 GB of RAM (8 GB recommended)
5 GB of available hard-disk space; additional free space required during installation (cannot install on removable flash storage devices)
Additional disk space for disk cache (10 GB recommended)
1280 x 1080 display
OpenGL 2.0–capable system
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certifi ed GPU card for GPU-accelerated ray-traced 3D renderer
Internet connection and registration are necessary for required software activation, validation of subscriptions, and access to online services.*
*I also have a 1TB external hardrive*
This question was solved.
View Solution.Your problem is that the program wants a good video card and a fast hard drive and lots of memory and you have none of the above. If you upgraded the RAM to 8 gigs and installed a solid state hard drive you might make the program useable but the real bottleneck is going to be the Intel HD graphics, which cannot be upgraded.
You do have an open slot to add one 4 gig memory module. This is an easy relatively inexpensive upgrade. See here:
https://www.youtube.com/watch?v=L7FvZ-JduRM
http://www.crucial.com/usa/en/ct51264bf160b
I would try this a step at a time. Next would be the solid state drive. That would cost maybe $150. Post back if you need more help.
If this is "the Answer" please click "Accept as Solution" to help others find it. -
I have a normal report , i need to make it into ALV,
Hi,
i have a normal report and i need to make it into ALV Report in ECC5.0version. when i making it into ALV its giving blank.
can any one help me out to make below code in to ALV report.
REPORT ZSAMPLE line-size 260
line-count 65
no standard page heading.
====================================================================
TABLES *********************************
====================================================================
tables : bseg,
bkpf,
kna1,
bsid,
bsad,
knb1.
data : begin of customer_tab occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
flag(1) type c,
end of customer_tab.
data : begin of customerdoc_tab occurs 0,
kunnr like kna1-kunnr,
belnr like bkpf-belnr,
gjahr like bkpf-gjahr,
monat like bkpf-monat,
end of customerdoc_tab.
data : begin of doc_tab occurs 0,
belnr like bkpf-belnr,
gjahr like bkpf-gjahr,
monat like bkpf-monat,
end of doc_tab.
DATA: BEGIN OF BSID_TAB OCCURS 0,
BUKRS LIKE BSID-BUKRS,
PRCTR LIKE BSID-PRCTR,
KUNNR LIKE BSID-KUNNR,
FLAG(1),
UMSKZ LIKE BSID-UMSKZ,
BLART LIKE BSID-BLART,
BELNR LIKE BSID-BELNR,
BUZEI LIKE BSID-BUZEI,
NETDT LIKE BSID-ZFBDT,
ZFBDT LIKE BSID-ZFBDT,
BUDAT LIKE BSID-BUDAT,
BLDAT LIKE BSID-BLDAT,
BSCHL LIKE BSID-BSCHL,
DMBTR LIKE BSID-DMBTR,
SHKZG LIKE BSID-SHKZG,
ZBD1T LIKE BSID-ZBD1T,
ZBD2T LIKE BSID-ZBD2T,
ZBD3T LIKE BSID-ZBD3T,
REBZG LIKE BSID-REBZG,
REBZT LIKE BSID-REBZT,
KOART LIKE BSEG-KOART,
SK1DT LIKE FAEDE-SK1DT,
SK2DT LIKE FAEDE-SK2DT,
DAYSD LIKE SY-TABIX,
END OF BSID_TAB.
ranges : r_bukrs for bsid-bukrs,
r_kunnr for kna1-kunnr.
===================================================================
VARIABLES *******************************
===================================================================
data : v_belnr like bseg-belnr,
v_gjahr like bkpf-gjahr,
v_monat like bkpf-monat,
v_ttlc type p,
v_flag(1) type c,
V_COUNT1(4) TYPE N,
V_COUNT2(4) TYPE N,
V_COUNT3(4) TYPE N,
V_COUNT4(4) TYPE N,
V_COUNT5(4) TYPE N,
V_COUNT6(4) TYPE N,
V_COUNT7(4) TYPE N,
V_COUNT8(4) TYPE N,
V_COUNT9(4) TYPE N,
V_COUNT10(4) TYPE N,
V_NET1 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 1
V_NET2 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 2
V_NET3 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 3
V_NET4 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 4
V_NET5 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 5
V_NET6 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 6
V_NET7 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 7
V_NET8 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 8
V_NET9 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 9
V_NET10 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 10
V_NET11 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 11
V_NET LIKE BSID-DMBTR, "Total Balance of Customer
V_ttlNET1 LIKE BSID-DMBTR,
V_ttlNET2 LIKE BSID-DMBTR,
V_ttlNET3 LIKE BSID-DMBTR,
V_ttlNET4 LIKE BSID-DMBTR,
V_ttlNET5 LIKE BSID-DMBTR,
V_ttlNET6 LIKE BSID-DMBTR,
V_ttlNET7 LIKE BSID-DMBTR,
V_ttlNET8 LIKE BSID-DMBTR,
V_ttlNET9 LIKE BSID-DMBTR,
V_ttlNET10 LIKE BSID-DMBTR,
V_ttlNET11 LIKE BSID-DMBTR,
V_ttlNET LIKE BSID-DMBTR,
v_kunnr like bseg-kunnr,
V_BUTXT like t001-butxt.
===================================================================
SELECTION SCREEN ****************************
===================================================================
selection-screen begin of block b1 with frame title text-001.
parameters : p_bukrs like bseg-bukrs obligatory.
select-options : s_kunnr for kna1-kunnr,
s_BRSCH for kna1-BRSCH,
s_REGIO for kna1-REGIO,
s_KTOKD for kna1-KTOKD,
s_BUSAB for knb1-BUSAB.
selection-screen: end of block b1.
selection-screen begin of block b2 with frame title text-003.
PARAMETERS: DAT LIKE SY-DATUM DEFAULT SY-DATUM.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) TEXT-002.
SELECTION-SCREEN POSITION POS_LOW.
*PARAMETERS: RASTBIS1 LIKE RFPDO1-ALLGROGR DEFAULT '000'.
*PARAMETERS: RASTBIS2 LIKE RFPDO1-ALLGROGR DEFAULT '030'.
*PARAMETERS: RASTBIS3 LIKE RFPDO1-ALLGROGR DEFAULT '060'.
*PARAMETERS: RASTBIS4 LIKE RFPDO1-ALLGROGR DEFAULT '090'.
*PARAMETERS: RASTBIS5 LIKE RFPDO1-ALLGROGR DEFAULT '120'.
PARAMETERS: RASTBIS1(4) type n DEFAULT '0000'.
PARAMETERS: RASTBIS2(4) type n DEFAULT '0030'.
PARAMETERS: RASTBIS3(4) type n DEFAULT '0060'.
PARAMETERS: RASTBIS4(4) type n DEFAULT '0090'.
PARAMETERS: RASTBIS5(4) type n DEFAULT '0120'.
PARAMETERS: RASTBIS6(4) type n DEFAULT '0150'.
PARAMETERS: RASTBIS7(4) type n DEFAULT '0180'.
PARAMETERS: RASTBIS8(4) type n DEFAULT '0210'.
PARAMETERS: RASTBIS9(4) type n DEFAULT '0240'.
PARAMETERS: RASTBIS0(4) type n DEFAULT '0270'.
SELECTION-SCREEN END OF LINE.
Noted item removed as per FI instruction
PARAMETERS: P_STAND AS CHECKBOX default 'X',
P_NOTED AS CHECKBOX ,
P_SPCAL AS CHECKBOX .
selection-screen: end of block b2.
selection-screen begin of block b3 with frame.
PARAMETERS: allgline like RFPDO1-allgline .
Parameters : p_balyes type c radiobutton group grp9 default 'X',
p_balno type c radiobutton group grp9.
selection-screen: end of block b3.
Check for the Select option
AT SELECTION-SCREEN.
IF P_STAND = '' AND P_SPCAL = '' .
MESSAGE E398(00) WITH 'PLEASE CHOOSE AT LEAST ONE G/L INDICATOR!'.
ENDIF.
Check for Company code Authorization
authority-check object 'F_BKPF_BUK'
ID 'BUKRS' FIELD p_bukrs
ID 'ACTVT' FIELD '03'.
if sy-subrc ne 0.
message e398(00) with 'You are not Authorized for CC ' p_bukrs.
Endif.
===================================================================
START-OF-SELECTION ****************************
===================================================================
START-OF-SELECTION.
V_COUNT1 = RASTBIS1 + 1.
V_COUNT2 = RASTBIS2 + 1.
V_COUNT3 = RASTBIS3 + 1.
V_COUNT4 = RASTBIS4 + 1.
V_COUNT5 = RASTBIS5 + 1.
V_COUNT6 = RASTBIS6 + 1.
V_COUNT7 = RASTBIS7 + 1.
V_COUNT8 = RASTBIS8 + 1.
V_COUNT9 = RASTBIS9 + 1.
V_COUNT10 = RASTBIS0 + 1.
perform extract_data.
===================================================================
At line Selection *****************************
===================================================================
at line-selection.
if sy-lilli >= 9 .
refresh r_bukrs.
move p_bukrs to r_bukrs-low.
move 'I' to r_bukrs-sign.
move 'EQ' to r_bukrs-option.
append r_bukrs.
refresh r_kunnr.
move customer_tab-kunnr to r_kunnr-low.
move 'I' to r_kunnr-sign.
move 'EQ' to r_kunnr-option.
append r_kunnr.
submit ZFARVR0040 and return
with p_bukrs = p_bukrs
with dat = dat
with p_stand = p_stand
with p_spcal = P_SPCAL
with s_kunnr in r_kunnr.
endif.
===================================================================
Top of Page *******************************
===================================================================
TOP-OF-PAGE.
SELECT SINGLE BUTXT FROM T001 INTO V_BUTXT
WHERE BUKRS = p_BUKRS .
WRITE:/73'Customers Aging Analysis',140'PAGE NO.',
SY-PAGNO.
WRITE:/002 'COMPANY',
011 P_BUKRS,
017 V_BUTXT,
055 allgline centered,
140 'DATE :',
150 sy-datum .
write:/002 'User',
011 sy-UNAME,
140 'Time :',
150 sy-UZEIT.
SKIP.
format color col_heading intensified off.
WRITE:/ SY-ULINE,
SY-VLINE,002 'Customer',
012 SY-VLINE,013 'Name',
043 SY-VLINE,048 'CURRENT',
061 SY-VLINE,065 'FROM ',V_COUNT1,
079 SY-VLINE,083 'FROM ',V_COUNT2,
097 SY-VLINE,101 'FROM ',V_COUNT3,
115 SY-VLINE,119 'FROM ',V_COUNT4,
133 SY-VLINE,137 'FROM ',V_COUNT5,
151 SY-VLINE,155 'FROM ',V_COUNT6,
169 SY-VLINE,173 'FROM ',V_COUNT7,
187 SY-VLINE,191 'FROM ',V_COUNT8,
205 SY-VLINE,209 'FROM ',V_COUNT9,
223 SY-VLINE,228 'FROM ',V_COUNT10,
243 SY-VLINE,248 'TOTAL',
268 SY-VLINE.
WRITE:/ SY-VLINE,002 'Number',
12 SY-VLINE,
43 SY-VLINE,
061 SY-VLINE,065 'TO ',RASTBIS2,
079 SY-VLINE,083 'TO ',RASTBIS3,
097 SY-VLINE,101 'TO ',RASTBIS4,
115 SY-VLINE,119 'TO ',RASTBIS5,
133 SY-VLINE,137 'FROM ',RASTBIS6,
151 SY-VLINE,155 'FROM ',RASTBIS7,
169 SY-VLINE,173 'FROM ',RASTBIS8,
187 SY-VLINE,191 'FROM ',RASTBIS9,
205 SY-VLINE,209 'FROM ',RASTBIS0,
223 SY-VLINE,
243 SY-VLINE,
268 SY-VLINE,
SY-ULINE.
format color off.
===================================================================
END-OF-SELECTION ***************************
===================================================================
end-of-selection.
===================================================================
Form : Extract_Data *
===================================================================
form extract_data.
Select the Customers
Select t1~kunnr t2~name1
into corresponding fields of table customer_tab
from knb1 as t1 inner join kna1 as t2
on t2~kunnr = t1~kunnr
where t1~bukrs = p_bukrs
and t1~kunnr in s_kunnr
and t1~BUSAB in s_busab
and t2~regio in s_regio
and t2~BRSCH in s_BRSCH
and t2~KTOKD in s_KTOKD.
if sy-subrc <> 0.
message e398(00) with 'No Customers Selected'.
endif.
sort customer_tab.
describe table customer_tab lines v_ttlc.
v_ttlc = v_ttlc + 10.
loop at customer_tab.
v_net1 = 0.
v_net2 = 0.
v_net3 = 0.
v_net4 = 0.
v_net5 = 0.
v_net6 = 0.
v_net7 = 0.
v_net8 = 0.
v_net9 = 0.
v_net10 = 0.
v_net11 = 0.
v_net = 0.
perform calculate_ageing
using
p_bukrs
customer_tab-kunnr
dat
RASTBIS1
RASTBIS2
RASTBIS3
RASTBIS4
RASTBIS5
RASTBIS6
RASTBIS7
RASTBIS8
RASTBIS9
RASTBIS0
P_STAND
' ' "noted item
P_SPCAL
changing
v_net1
v_net2
v_net3
v_net4
v_net5
v_net6
v_net7
v_net8
v_net9
v_net10
v_net11
v_net.
if p_balyes = 'X' or v_net > 0.
format color col_total.
write:/ sy-vline,
002 customer_tab-kunnr,
012 SY-VLINE,013(30) customer_tab-name1,
043 SY-VLINE,044(16) v_net1,
061 SY-VLINE,062(16) v_net2,
079 SY-VLINE,080(16) v_net3,
097 SY-VLINE,098(16) v_net4,
115 SY-VLINE,116(16) v_net5,
133 SY-VLINE,134(16) v_net6,
151 SY-VLINE,152(16) v_net7,
169 SY-VLINE,170(16) v_net8,
187 SY-VLINE,188(16) v_net9,
205 SY-VLINE,206(16) v_net10,
223 SY-VLINE,224(16) v_net11,
239 SY-VLINE,240(16) v_net,
258 SY-VLINE.
format color off.
hide : customer_tab-kunnr.
v_ttlnet1 = v_ttlnet1 + v_net1.
v_ttlnet2 = v_ttlnet2 + v_net2.
v_ttlnet3 = v_ttlnet3 + v_net3.
v_ttlnet4 = v_ttlnet4 + v_net4.
v_ttlnet5 = v_ttlnet5 + v_net5.
v_ttlnet6 = v_ttlnet6 + v_net6.
v_ttlnet7 = v_ttlnet7 + v_net7.
v_ttlnet8 = v_ttlnet8 + v_net8.
v_ttlnet9 = v_ttlnet9 + v_net9.
v_ttlnet10 = v_ttlnet10 + v_net10.
v_ttlnet11 = v_ttlnet11 + v_net11.
v_ttlnet = v_ttlnet + v_net.
endif.
endloop.
ULINE.
format color col_total.
write:/ sy-vline,
012 SY-VLINE,012(30) ' T O T A L',
043 SY-VLINE,044(16) v_ttlnet1,
061 SY-VLINE,062(16) v_ttlnet2,
079 SY-VLINE,080(16) v_ttlnet3,
097 SY-VLINE,098(16) v_ttlnet4,
115 SY-VLINE,116(16) v_ttlnet5,
133 SY-VLINE,134(16) v_ttlnet6,
151 SY-VLINE,152(16) v_ttlnet7,
169 SY-VLINE,170(16) v_ttlnet8,
187 SY-VLINE,188(16) v_ttlnet9,
205 SY-VLINE,206(16) v_ttlnet10,
223 SY-VLINE,224(16) v_ttlnet11,
239 SY-VLINE,240(16) v_ttlnet,
258 SY-VLINE.
format color off.
ULINE.
endform.
Function to Calculate Aging.
Form calculate_ageing using
bukrs
kunnr
dat
RASTBIS1
RASTBIS2
RASTBIS3
RASTBIS4
RASTBIS5
RASTBIS6
RASTBIS7
RASTBIS8
RASTBIS9
RASTBIS0
P_STAND
P_NOTED
P_SPCAL
changing
v_net1
v_net2
v_net3
v_net4
v_net5
v_net6
v_net7
v_net8
v_net9
v_net10
v_net11
v_net.
DATA: BEGIN OF BSID_TAB1 OCCURS 0,
BUKRS LIKE BSID-BUKRS,
PRCTR LIKE BSID-PRCTR,
KUNNR LIKE BSID-KUNNR,
FLAG(1),
UMSKZ LIKE BSID-UMSKZ,
BLART LIKE BSID-BLART,
BELNR LIKE BSID-BELNR,
BUZEI LIKE BSID-BUZEI,
NETDT LIKE BSID-ZFBDT,
ZFBDT LIKE BSID-ZFBDT,
BUDAT LIKE BSID-BUDAT,
BLDAT LIKE BSID-BLDAT,
BSCHL LIKE BSID-BSCHL,
DMBTR LIKE BSID-DMBTR,
SHKZG LIKE BSID-SHKZG,
ZBD1T LIKE BSID-ZBD1T,
ZBD2T LIKE BSID-ZBD2T,
ZBD3T LIKE BSID-ZBD3T,
REBZG LIKE BSID-REBZG,
REBZT LIKE BSID-REBZT,
KOART LIKE BSEG-KOART,
SK1DT LIKE FAEDE-SK1DT,
SK2DT LIKE FAEDE-SK2DT,
DAYSD LIKE SY-TABIX,
END OF BSID_TAB1.
RANGES: R_UMSKZ FOR BSID-UMSKZ.
Data : V_ZFBDT Like bsid-ZFBDT,
V_ZBD1T Like bsid-ZBD1T,
V_ZBD2T Like bsid-ZBD2T,
V_ZBD3T Like bsid-ZBD3T,
V_LINES(8) TYPE n.
IF P_NOTED = 'X'. "CHECK NOTED ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'D'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'L'.
APPEND R_UMSKZ.
ENDIF.
IF P_STAND = 'X'. "CHECK STANDARD ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = ' '.
APPEND R_UMSKZ.
ENDIF.
IF P_SPCAL = 'X'. "CHECK SPECIAL G/L TRANSACTION
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'A'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'B'.
APPEND R_UMSKZ.
ENDIF.
SELECT * FROM BSID INTO CORRESPONDING FIELDS OF TABLE BSID_TAB
WHERE BUKRS = BUKRS AND
budat <= dat AND
KUNNR = KUNNR AND
UMSKZ in R_UMSKZ.
SELECT * FROM BSAD appending CORRESPONDING FIELDS OF TABLE BSID_TAB
WHERE BUKRS = BUKRS AND
budat <= dat AND
augdt >= dat AND
KUNNR = KUNNR AND
UMSKZ in R_UMSKZ.
DESCRIBE TABLE BSID_TAB LINES V_LINES.
LOOP AT BSID_TAB.
if bsid_tab-BLART = 'DZ'.
Select single ZFBDT ZBD1T ZBD2T ZBD3T
into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
from bsid where BUKRS = BUKRS
and kunnr = bsid_tab-kunnr
and BELNR = bsid_tab-REBZG.
if sy-subrc = 0.
bsid_tab-ZFBDT = V_ZFBDT.
bsid_tab-ZBD1T = V_ZBD1T.
bsid_tab-ZBD2T = V_ZBD2T.
bsid_tab-ZBD3T = V_ZBD3T.
else.
Select single ZFBDT ZBD1T ZBD2T ZBD3T
into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
from bsad where BUKRS = BUKRS
and kunnr = bsid_tab-kunnr
and BELNR = bsid_tab-REBZG.
if sy-subrc <> 0.
bsid_tab-ZFBDT = V_ZFBDT.
bsid_tab-ZBD1T = V_ZBD1T.
bsid_tab-ZBD2T = V_ZBD2T.
bsid_tab-ZBD3T = V_ZBD3T.
endif.
endif.
endif.
IF BSID_TAB-SHKZG = 'H'.
BSID_TAB-DMBTR = BSID_TAB-DMBTR * ( - 1 ).
ENDIF.
bsid_tab-netdt = bsid_tab-ZFBDT.
bsid_tab-netdt = bsid_tab-budat.
bsid_tab-koart = 'D'.
MODIFY BSID_TAB.
PERFORM CALC_DUE_DATE USING BSID_TAB.
BSID_TAB-DAYSD = DAT - BSID_TAB-NETDT.
IF BSID_TAB-DAYSD <= RASTBIS1.
V_NET1 = V_NET1 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS2.
V_NET2 = V_NET2 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS3.
V_NET3 = V_NET3 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS4.
V_NET4 = V_NET4 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
V_NET5 = V_NET5 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS6.
V_NET6 = V_NET6 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS7.
V_NET7 = V_NET7 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
V_NET8 = V_NET8 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS9.
V_NET9 = V_NET9 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS0.
V_NET10 = V_NET10 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD > RASTBIS0.
V_NET11 = V_NET11 + BSID_TAB-DMBTR.
ENDIF.
V_NET = V_NET + BSID_TAB-DMBTR.
MODIFY BSID_TAB.
ENDLOOP.
endform.
Calculate Due Date
FORM CALC_DUE_DATE USING P_BSID_TAB STRUCTURE BSID_TAB.
DATA : REFE TYPE P.
IF P_BSID_TAB-KOART = 'K' OR P_BSID_TAB-KOART = 'D'.
IF P_BSID_TAB-ZFBDT IS INITIAL.
P_BSID_TAB-ZFBDT = P_BSID_TAB-BLDAT.
ENDIF.
*Nettofälligkeit bestimmen--
IF NOT P_BSID_TAB-ZBD3T IS INITIAL.
REFE = P_BSID_TAB-ZBD3T.
ELSE.
IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
REFE = P_BSID_TAB-ZBD2T.
ELSE.
REFE = P_BSID_TAB-ZBD1T.
ENDIF.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
IF P_BSID_TAB-REBZG IS INITIAL.
REFE = 0.
ENDIF.
ENDIF.
P_BSID_TAB-NETDT = P_BSID_TAB-ZFBDT + REFE.
*Skontofälligkeiten bestimmen--
IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
P_BSID_TAB-SK2DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD2T.
ELSE.
P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
ENDIF.
IF NOT P_BSID_TAB-ZBD1T IS INITIAL
OR NOT P_BSID_TAB-ZBD2T IS INITIAL.
P_BSID_TAB-SK1DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD1T.
ELSE.
P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
IF P_BSID_TAB-REBZG IS INITIAL.
P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
ENDIF.
ENDIF.
ELSE.
MESSAGE E122 RAISING ACCOUNT_TYPE_NOT_SUPPORTED.
ENDIF.
E_FAEDE = FAEDE.
ENDFORM.Hi,
As vijay said...
1.Declare One final Internal table which you want to show the data
2 . populate the fieldcatalog using the FM or Manually using the itab in step1
3. Collect the Data into final internal table which you created in Step 1.
4. pass the fieldcat and Internal table to ALV FM.
chk out the prg below i have created your program but i donn knw wht are the output fields... chk your prg
*REPORT ZALVTEST .
REPORT ZSAMPLE line-size 260
line-count 65
no standard page heading.
TYPE-POOLS: SLIS.
====================================================================
TABLES *********************************
====================================================================
tables : bseg,
bkpf,
kna1,
bsid,
bsad,
knb1.
data : begin of customer_tab occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
flag(1) type c,
end of customer_tab.
data : begin of customerdoc_tab occurs 0,
kunnr like kna1-kunnr,
belnr like bkpf-belnr,
gjahr like bkpf-gjahr,
monat like bkpf-monat,
end of customerdoc_tab.
data : begin of doc_tab occurs 0,
belnr like bkpf-belnr,
gjahr like bkpf-gjahr,
monat like bkpf-monat,
end of doc_tab.
DATA: BEGIN OF BSID_TAB OCCURS 0,
BUKRS LIKE BSID-BUKRS,
PRCTR LIKE BSID-PRCTR,
KUNNR LIKE BSID-KUNNR,
FLAG(1),
UMSKZ LIKE BSID-UMSKZ,
BLART LIKE BSID-BLART,
BELNR LIKE BSID-BELNR,
BUZEI LIKE BSID-BUZEI,
NETDT LIKE BSID-ZFBDT,
ZFBDT LIKE BSID-ZFBDT,
BUDAT LIKE BSID-BUDAT,
BLDAT LIKE BSID-BLDAT,
BSCHL LIKE BSID-BSCHL,
DMBTR LIKE BSID-DMBTR,
SHKZG LIKE BSID-SHKZG,
ZBD1T LIKE BSID-ZBD1T,
ZBD2T LIKE BSID-ZBD2T,
ZBD3T LIKE BSID-ZBD3T,
REBZG LIKE BSID-REBZG,
REBZT LIKE BSID-REBZT,
KOART LIKE BSEG-KOART,
SK1DT LIKE FAEDE-SK1DT,
SK2DT LIKE FAEDE-SK2DT,
DAYSD LIKE SY-TABIX,
END OF BSID_TAB.
ranges : r_bukrs for bsid-bukrs,
r_kunnr for kna1-kunnr.
===================================================================
VARIABLES *******************************
===================================================================
data : v_belnr like bseg-belnr,
v_gjahr like bkpf-gjahr,
v_monat like bkpf-monat,
v_ttlc type p,
v_flag(1) type c,
V_COUNT1(4) TYPE N,
V_COUNT2(4) TYPE N,
V_COUNT3(4) TYPE N,
V_COUNT4(4) TYPE N,
V_COUNT5(4) TYPE N,
V_COUNT6(4) TYPE N,
V_COUNT7(4) TYPE N,
V_COUNT8(4) TYPE N,
V_COUNT9(4) TYPE N,
V_COUNT10(4) TYPE N,
V_NET1 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 1
V_NET2 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 2
V_NET3 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 3
V_NET4 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 4
V_NET5 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 5
V_NET6 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 6
V_NET7 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 7
V_NET8 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 8
V_NET9 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 9
V_NET10 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 10
V_NET11 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 11
V_NET LIKE BSID-DMBTR, "Total Balance of Customer
V_ttlNET1 LIKE BSID-DMBTR,
V_ttlNET2 LIKE BSID-DMBTR,
V_ttlNET3 LIKE BSID-DMBTR,
V_ttlNET4 LIKE BSID-DMBTR,
V_ttlNET5 LIKE BSID-DMBTR,
V_ttlNET6 LIKE BSID-DMBTR,
V_ttlNET7 LIKE BSID-DMBTR,
V_ttlNET8 LIKE BSID-DMBTR,
V_ttlNET9 LIKE BSID-DMBTR,
V_ttlNET10 LIKE BSID-DMBTR,
V_ttlNET11 LIKE BSID-DMBTR,
V_ttlNET LIKE BSID-DMBTR,
v_kunnr like bseg-kunnr,
V_BUTXT like t001-butxt.
********Declare Data Areas for List Viewer ***********
DATA: FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT_LN LIKE LINE OF FIELDCAT,
FIELD TYPE SLIS_FIELDNAME,
COL_POS TYPE I ,
PGM LIKE SY-REPID,
FIELD_VALUE(20),
TABLE_NAME(10).
===================================================================
SELECTION SCREEN ****************************
===================================================================
selection-screen begin of block b1 with frame title text-001.
parameters : p_bukrs like bseg-bukrs obligatory.
select-options : s_kunnr for kna1-kunnr,
s_BRSCH for kna1-BRSCH,
s_REGIO for kna1-REGIO,
s_KTOKD for kna1-KTOKD,
s_BUSAB for knb1-BUSAB.
selection-screen: end of block b1.
selection-screen begin of block b2 with frame title text-003.
PARAMETERS: DAT LIKE SY-DATUM DEFAULT SY-DATUM.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) TEXT-002.
SELECTION-SCREEN POSITION POS_LOW.
*PARAMETERS: RASTBIS1 LIKE RFPDO1-ALLGROGR DEFAULT '000'.
*PARAMETERS: RASTBIS2 LIKE RFPDO1-ALLGROGR DEFAULT '030'.
*PARAMETERS: RASTBIS3 LIKE RFPDO1-ALLGROGR DEFAULT '060'.
*PARAMETERS: RASTBIS4 LIKE RFPDO1-ALLGROGR DEFAULT '090'.
*PARAMETERS: RASTBIS5 LIKE RFPDO1-ALLGROGR DEFAULT '120'.
PARAMETERS: RASTBIS1(4) type n DEFAULT '0000'.
PARAMETERS: RASTBIS2(4) type n DEFAULT '0030'.
PARAMETERS: RASTBIS3(4) type n DEFAULT '0060'.
PARAMETERS: RASTBIS4(4) type n DEFAULT '0090'.
PARAMETERS: RASTBIS5(4) type n DEFAULT '0120'.
PARAMETERS: RASTBIS6(4) type n DEFAULT '0150'.
PARAMETERS: RASTBIS7(4) type n DEFAULT '0180'.
PARAMETERS: RASTBIS8(4) type n DEFAULT '0210'.
PARAMETERS: RASTBIS9(4) type n DEFAULT '0240'.
PARAMETERS: RASTBIS0(4) type n DEFAULT '0270'.
SELECTION-SCREEN END OF LINE.
Noted item removed as per FI instruction
PARAMETERS: P_STAND AS CHECKBOX default 'X',
P_NOTED AS CHECKBOX ,
P_SPCAL AS CHECKBOX .
selection-screen: end of block b2.
selection-screen begin of block b3 with frame.
PARAMETERS: allgline like RFPDO1-allgline .
Parameters : p_balyes type c radiobutton group grp9 default 'X',
p_balno type c radiobutton group grp9.
selection-screen: end of block b3.
Check for the Select option
AT SELECTION-SCREEN.
IF P_STAND = '' AND P_SPCAL = '' .
MESSAGE E398(00) WITH 'PLEASE CHOOSE AT LEAST ONE G/L INDICATOR!'.
ENDIF.
Check for Company code Authorization
authority-check object 'F_BKPF_BUK'
ID 'BUKRS' FIELD p_bukrs
ID 'ACTVT' FIELD '03'.
if sy-subrc ne 0.
message e398(00) with 'You are not Authorized for CC ' p_bukrs.
Endif.
===================================================================
START-OF-SELECTION ****************************
===================================================================
START-OF-SELECTION.
V_COUNT1 = RASTBIS1 + 1.
V_COUNT2 = RASTBIS2 + 1.
V_COUNT3 = RASTBIS3 + 1.
V_COUNT4 = RASTBIS4 + 1.
V_COUNT5 = RASTBIS5 + 1.
V_COUNT6 = RASTBIS6 + 1.
V_COUNT7 = RASTBIS7 + 1.
V_COUNT8 = RASTBIS8 + 1.
V_COUNT9 = RASTBIS9 + 1.
V_COUNT10 = RASTBIS0 + 1.
perform extract_data.
Build Field Catalogs **************************
PERFORM BUILD_FIELDCAT.
*******Start List Viewer *******************************
PERFORM START_LIST_VIEWER.
===================================================================
At line Selection *****************************
===================================================================
at line-selection.
if sy-lilli >= 9 .
refresh r_bukrs.
move p_bukrs to r_bukrs-low.
move 'I' to r_bukrs-sign.
move 'EQ' to r_bukrs-option.
append r_bukrs.
refresh r_kunnr.
move customer_tab-kunnr to r_kunnr-low.
move 'I' to r_kunnr-sign.
move 'EQ' to r_kunnr-option.
append r_kunnr.
submit ZFARVR0040 and return
with p_bukrs = p_bukrs
with dat = dat
with p_stand = p_stand
with p_spcal = P_SPCAL
with s_kunnr in r_kunnr.
endif.
===================================================================
Top of Page *******************************
===================================================================
TOP-OF-PAGE.
SELECT SINGLE BUTXT FROM T001 INTO V_BUTXT
WHERE BUKRS = p_BUKRS .
WRITE:/73'Customers Aging Analysis',140'PAGE NO.',
SY-PAGNO.
WRITE:/002 'COMPANY',
011 P_BUKRS,
017 V_BUTXT,
055 allgline centered,
140 'DATE :',
150 sy-datum .
write:/002 'User',
011 sy-UNAME,
140 'Time :',
150 sy-UZEIT.
SKIP.
format color col_heading intensified off.
WRITE:/ SY-ULINE,
SY-VLINE,002 'Customer',
012 SY-VLINE,013 'Name',
043 SY-VLINE,048 'CURRENT',
061 SY-VLINE,065 'FROM ',V_COUNT1,
079 SY-VLINE,083 'FROM ',V_COUNT2,
097 SY-VLINE,101 'FROM ',V_COUNT3,
115 SY-VLINE,119 'FROM ',V_COUNT4,
133 SY-VLINE,137 'FROM ',V_COUNT5,
151 SY-VLINE,155 'FROM ',V_COUNT6,
169 SY-VLINE,173 'FROM ',V_COUNT7,
187 SY-VLINE,191 'FROM ',V_COUNT8,
205 SY-VLINE,209 'FROM ',V_COUNT9,
223 SY-VLINE,228 'FROM ',V_COUNT10,
243 SY-VLINE,248 'TOTAL',
268 SY-VLINE.
WRITE:/ SY-VLINE,002 'Number',
12 SY-VLINE,
43 SY-VLINE,
061 SY-VLINE,065 'TO ',RASTBIS2,
079 SY-VLINE,083 'TO ',RASTBIS3,
097 SY-VLINE,101 'TO ',RASTBIS4,
115 SY-VLINE,119 'TO ',RASTBIS5,
133 SY-VLINE,137 'FROM ',RASTBIS6,
151 SY-VLINE,155 'FROM ',RASTBIS7,
169 SY-VLINE,173 'FROM ',RASTBIS8,
187 SY-VLINE,191 'FROM ',RASTBIS9,
205 SY-VLINE,209 'FROM ',RASTBIS0,
223 SY-VLINE,
243 SY-VLINE,
268 SY-VLINE,
SY-ULINE.
format color off.
===================================================================
END-OF-SELECTION ***************************
===================================================================
end-of-selection.
===================================================================
Form : Extract_Data *
===================================================================
form extract_data.
Select the Customers
Select t1~kunnr t2~name1
into corresponding fields of table customer_tab
from knb1 as t1 inner join kna1 as t2
on t2~kunnr = t1~kunnr
where t1~bukrs = p_bukrs
and t1~kunnr in s_kunnr
and t1~BUSAB in s_busab
and t2~regio in s_regio
and t2~BRSCH in s_BRSCH
and t2~KTOKD in s_KTOKD.
if sy-subrc <> 0.
message e398(00) with 'No Customers Selected'.
endif.
sort customer_tab.
describe table customer_tab lines v_ttlc.
v_ttlc = v_ttlc + 10.
loop at customer_tab.
v_net1 = 0.
v_net2 = 0.
v_net3 = 0.
v_net4 = 0.
v_net5 = 0.
v_net6 = 0.
v_net7 = 0.
v_net8 = 0.
v_net9 = 0.
v_net10 = 0.
v_net11 = 0.
v_net = 0.
perform calculate_ageing
using
p_bukrs
customer_tab-kunnr
dat
RASTBIS1
RASTBIS2
RASTBIS3
RASTBIS4
RASTBIS5
RASTBIS6
RASTBIS7
RASTBIS8
RASTBIS9
RASTBIS0
P_STAND
' ' "noted item
P_SPCAL
changing
v_net1
v_net2
v_net3
v_net4
v_net5
v_net6
v_net7
v_net8
v_net9
v_net10
v_net11
v_net.
if p_balyes = 'X' or v_net > 0.
format color col_total.
write:/ sy-vline,
002 customer_tab-kunnr,
012 SY-VLINE,013(30) customer_tab-name1,
043 SY-VLINE,044(16) v_net1,
061 SY-VLINE,062(16) v_net2,
079 SY-VLINE,080(16) v_net3,
097 SY-VLINE,098(16) v_net4,
115 SY-VLINE,116(16) v_net5,
133 SY-VLINE,134(16) v_net6,
151 SY-VLINE,152(16) v_net7,
169 SY-VLINE,170(16) v_net8,
187 SY-VLINE,188(16) v_net9,
205 SY-VLINE,206(16) v_net10,
223 SY-VLINE,224(16) v_net11,
239 SY-VLINE,240(16) v_net,
258 SY-VLINE.
format color off.
hide : customer_tab-kunnr.
v_ttlnet1 = v_ttlnet1 + v_net1.
v_ttlnet2 = v_ttlnet2 + v_net2.
v_ttlnet3 = v_ttlnet3 + v_net3.
v_ttlnet4 = v_ttlnet4 + v_net4.
v_ttlnet5 = v_ttlnet5 + v_net5.
v_ttlnet6 = v_ttlnet6 + v_net6.
v_ttlnet7 = v_ttlnet7 + v_net7.
v_ttlnet8 = v_ttlnet8 + v_net8.
v_ttlnet9 = v_ttlnet9 + v_net9.
v_ttlnet10 = v_ttlnet10 + v_net10.
v_ttlnet11 = v_ttlnet11 + v_net11.
v_ttlnet = v_ttlnet + v_net.
endif.
endloop.
ULINE.
format color col_total.
write:/ sy-vline,
012 SY-VLINE,012(30) ' T O T A L',
043 SY-VLINE,044(16) v_ttlnet1,
061 SY-VLINE,062(16) v_ttlnet2,
079 SY-VLINE,080(16) v_ttlnet3,
097 SY-VLINE,098(16) v_ttlnet4,
115 SY-VLINE,116(16) v_ttlnet5,
133 SY-VLINE,134(16) v_ttlnet6,
151 SY-VLINE,152(16) v_ttlnet7,
169 SY-VLINE,170(16) v_ttlnet8,
187 SY-VLINE,188(16) v_ttlnet9,
205 SY-VLINE,206(16) v_ttlnet10,
223 SY-VLINE,224(16) v_ttlnet11,
239 SY-VLINE,240(16) v_ttlnet,
258 SY-VLINE.
format color off.
ULINE.
endform.
Function to Calculate Aging.
Form calculate_ageing using
bukrs
kunnr
dat
RASTBIS1
RASTBIS2
RASTBIS3
RASTBIS4
RASTBIS5
RASTBIS6
RASTBIS7
RASTBIS8
RASTBIS9
RASTBIS0
P_STAND
P_NOTED
P_SPCAL
changing
v_net1
v_net2
v_net3
v_net4
v_net5
v_net6
v_net7
v_net8
v_net9
v_net10
v_net11
v_net.
DATA: BEGIN OF BSID_TAB1 OCCURS 0,
BUKRS LIKE BSID-BUKRS,
PRCTR LIKE BSID-PRCTR,
KUNNR LIKE BSID-KUNNR,
FLAG(1),
UMSKZ LIKE BSID-UMSKZ,
BLART LIKE BSID-BLART,
BELNR LIKE BSID-BELNR,
BUZEI LIKE BSID-BUZEI,
NETDT LIKE BSID-ZFBDT,
ZFBDT LIKE BSID-ZFBDT,
BUDAT LIKE BSID-BUDAT,
BLDAT LIKE BSID-BLDAT,
BSCHL LIKE BSID-BSCHL,
DMBTR LIKE BSID-DMBTR,
SHKZG LIKE BSID-SHKZG,
ZBD1T LIKE BSID-ZBD1T,
ZBD2T LIKE BSID-ZBD2T,
ZBD3T LIKE BSID-ZBD3T,
REBZG LIKE BSID-REBZG,
REBZT LIKE BSID-REBZT,
KOART LIKE BSEG-KOART,
SK1DT LIKE FAEDE-SK1DT,
SK2DT LIKE FAEDE-SK2DT,
DAYSD LIKE SY-TABIX,
END OF BSID_TAB1.
RANGES: R_UMSKZ FOR BSID-UMSKZ.
Data : V_ZFBDT Like bsid-ZFBDT,
V_ZBD1T Like bsid-ZBD1T,
V_ZBD2T Like bsid-ZBD2T,
V_ZBD3T Like bsid-ZBD3T,
V_LINES(8) TYPE n.
IF P_NOTED = 'X'. "CHECK NOTED ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'D'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'L'.
APPEND R_UMSKZ.
ENDIF.
IF P_STAND = 'X'. "CHECK STANDARD ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = ' '.
APPEND R_UMSKZ.
ENDIF.
IF P_SPCAL = 'X'. "CHECK SPECIAL G/L TRANSACTION
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'A'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'B'.
APPEND R_UMSKZ.
ENDIF.
SELECT * FROM BSID INTO CORRESPONDING FIELDS OF TABLE BSID_TAB
WHERE BUKRS = BUKRS AND
budat <= dat AND
KUNNR = KUNNR AND
UMSKZ in R_UMSKZ.
SELECT * FROM BSAD appending CORRESPONDING FIELDS OF TABLE BSID_TAB
WHERE BUKRS = BUKRS AND
budat <= dat AND
augdt >= dat AND
KUNNR = KUNNR AND
UMSKZ in R_UMSKZ.
DESCRIBE TABLE BSID_TAB LINES V_LINES.
LOOP AT BSID_TAB.
if bsid_tab-BLART = 'DZ'.
Select single ZFBDT ZBD1T ZBD2T ZBD3T
into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
from bsid where BUKRS = BUKRS
and kunnr = bsid_tab-kunnr
and BELNR = bsid_tab-REBZG.
if sy-subrc = 0.
bsid_tab-ZFBDT = V_ZFBDT.
bsid_tab-ZBD1T = V_ZBD1T.
bsid_tab-ZBD2T = V_ZBD2T.
bsid_tab-ZBD3T = V_ZBD3T.
else.
Select single ZFBDT ZBD1T ZBD2T ZBD3T
into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
from bsad where BUKRS = BUKRS
and kunnr = bsid_tab-kunnr
and BELNR = bsid_tab-REBZG.
if sy-subrc <> 0.
bsid_tab-ZFBDT = V_ZFBDT.
bsid_tab-ZBD1T = V_ZBD1T.
bsid_tab-ZBD2T = V_ZBD2T.
bsid_tab-ZBD3T = V_ZBD3T.
endif.
endif.
endif.
IF BSID_TAB-SHKZG = 'H'.
BSID_TAB-DMBTR = BSID_TAB-DMBTR * ( - 1 ).
ENDIF.
bsid_tab-netdt = bsid_tab-ZFBDT.
bsid_tab-netdt = bsid_tab-budat.
bsid_tab-koart = 'D'.
MODIFY BSID_TAB.
PERFORM CALC_DUE_DATE USING BSID_TAB.
BSID_TAB-DAYSD = DAT - BSID_TAB-NETDT.
IF BSID_TAB-DAYSD <= RASTBIS1.
V_NET1 = V_NET1 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS2.
V_NET2 = V_NET2 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS3.
V_NET3 = V_NET3 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS4.
V_NET4 = V_NET4 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
V_NET5 = V_NET5 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS6.
V_NET6 = V_NET6 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS7.
V_NET7 = V_NET7 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
V_NET8 = V_NET8 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS9.
V_NET9 = V_NET9 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS0.
V_NET10 = V_NET10 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD > RASTBIS0.
V_NET11 = V_NET11 + BSID_TAB-DMBTR.
ENDIF.
V_NET = V_NET + BSID_TAB-DMBTR.
MODIFY BSID_TAB.
ENDLOOP.
endform.
Calculate Due Date
FORM CALC_DUE_DATE USING P_BSID_TAB STRUCTURE BSID_TAB.
DATA : REFE TYPE P.
IF P_BSID_TAB-KOART = 'K' OR P_BSID_TAB-KOART = 'D'.
IF P_BSID_TAB-ZFBDT IS INITIAL.
P_BSID_TAB-ZFBDT = P_BSID_TAB-BLDAT.
ENDIF.
*Nettofälligkeit bestimmen--
IF NOT P_BSID_TAB-ZBD3T IS INITIAL.
REFE = P_BSID_TAB-ZBD3T.
ELSE.
IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
REFE = P_BSID_TAB-ZBD2T.
ELSE.
REFE = P_BSID_TAB-ZBD1T.
ENDIF.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
IF P_BSID_TAB-REBZG IS INITIAL.
REFE = 0.
ENDIF.
ENDIF.
P_BSID_TAB-NETDT = P_BSID_TAB-ZFBDT + REFE.
*Skontofälligkeiten bestimmen--
IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
P_BSID_TAB-SK2DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD2T.
ELSE.
P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
ENDIF.
IF NOT P_BSID_TAB-ZBD1T IS INITIAL
OR NOT P_BSID_TAB-ZBD2T IS INITIAL.
P_BSID_TAB-SK1DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD1T.
ELSE.
P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
IF P_BSID_TAB-REBZG IS INITIAL.
P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
ENDIF.
ENDIF.
ELSE.
MESSAGE E122 RAISING ACCOUNT_TYPE_NOT_SUPPORTED.
ENDIF.
E_FAEDE = FAEDE.
ENDFORM.
*& Form BUILD_FIELDCAT
FORM BUILD_FIELDCAT .
PGM = SY-REPID.
FIELD = 'give field name'.
TABLE_NAME = 'give table name'.
PERFORM FIELDCAT_FILL USING FIELD.
and so on for the no. of fields you want to display
ENDFORM. " BUILD_FIELDCAT
*& Form START_LIST_VIEWER
FORM START_LIST_VIEWER.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_CALLBACK_PROGRAM = PGM
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_STRUCTURE_NAME =
IS_LAYOUT =
IT_FIELDCAT = FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = FINAL TAB(OUTPUT STATEMENTS TABLE)
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. " START_LIST_VIEWER
*& Form FIELDCAT_FILL
text
FORM FIELDCAT_FILL USING FIELD_VALUE.
ADD 1 TO COL_POS.
FIELDCAT_LN-REF_TABNAME = TABLE_NAME.
FIELDCAT_LN-FIELDNAME = FIELD_VALUE.
FIELDCAT_LN-KEY = SPACE.
FIELDCAT_LN-DO_SUM = SPACE.
FIELDCAT_LN-COL_POS = COL_POS.
FIELDCAT_LN-NO_OUT = SPACE.
FIELDCAT_LN-QFIELDNAME = SPACE.
FIELDCAT_LN-HOTSPOT = SPACE.
APPEND FIELDCAT_LN TO FIELDCAT.
ENDFORM. " FIELDCAT_FILL
Reward points if you find this helpful
Regards,
Harini -
Hi there,
I bought My Iphone 4s from Iran, I need to make an Apple Id but Iran is not in the registered countries?! I dont know what to choose? Also From Iran we do not have Credit card facility for payment option?!! Any idea how I can get FREE APPS on my New Phon?!!
Please let me know how I can get this sorted as soon as possible!! Thank you very muchYou can create an Apple ID without a credit card, see this article:
Create an iTunes App Store account without a credit card
Check this post about iPhones from Iran:
Re: Why Apple does not support from Iran? And why not open a store in Iran?
Maybe you are looking for
-
I have imported a csv from my mortgage repayments, my father and I pay seperate amounts. I am trying to show how much I have paid vs what he has paid, how much is owed and what % we own.. We are 50/50 on the property.. Help?
-
Hr-abap payroll (payslip problem)
Hi, I am modifying the payslip. Here in input screen we r using plant option. my problem is if the person shifts from one plant to another plant then the payslip of that person must be latest plant payslip. but if the end user takes payslip of the pe
-
I want to display the print preview by using JavaScript.
Can the print preview be displayed by using JavaScript?
-
How to embed a .vi as a web page on a remote server
I use a remote server running a Plone content management system application to allow remote users connect via the internet and store data files (delimited text files) for later analysis . I am using Labview 7.0 I wish to change our current data analy
-
Default Alarm Sound Bug iPod Touch
I have a problem with my iPod Touch. When I set an alarm with a sound OTHER than Time Passing it defaults back to Time Passing when it actually goes off. I tried many times to change the sound. The only way I fixed this was to do a complete reset (I