I need to make some references on a photo
I need to make some references on a photo like circle around a particular area w/ arrows & stuff like that. Anybody??? how do I do that?
Look at Custom Shapes in the Photoshop toolbox.
Hold the mouse down over the Rectangle tool to reveal it (Not the rectangular Marquee!)
Put them on a copy of the original!
Similar Messages
-
I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, text's, effects, etc..... just one big clip,,,pls help, i need to make some changes to the project..thanx
Hi Stephen, thanx...
Yes, we are talking about FCP X...this is the thing:
I worked on a project a few days ago and went to share - export movie.
Today, i opened the FCP again, to make some changes, and when i enter to the project, it shows me as one big clip.....i dont see it says compound clip....and i tried anyways pressing break appart clips...but nothing....could it be that i made it compound before exporting it..? if so how can i recover the un-compound version >?
I tried to import the saved .mov file, but it opens the same....as one long clip...
Pls help...thanx. -
I hope I'm in the right place since I was sort of redirected here Recently I have been receiving the message that my startup disc is full and that I need to make room by deleting files. At first I received the message when I left my computer unattended with my virtual machine on, using VMWare Fusion to run Windows. Recently though, I got the message when I left my computer unattended for about 6 hours without the virtual machine running. As an aside, I get extremely nervous when anything freezes VMWare because it is usually a nightmare to get back into Windows if I can at all without calling Tech Support. This new message however, appeared without the virtual machine active, so I was relieved that VMWare most likely was not the cause. After reading a number of Tech Support articles and Community discussion questions and answers, I started wondering if iTunes or the SMC firmware or a combination thereof may be causing the problems. Mind you I know nothing about the SMC stuff because as I said, I am really new to Mac and know very little about computer code or processors or any of that stuff. But I do know that iTunes has recently been giving me some trouble, such as opening on start up and I can't figure out why and messing around with my iTunes libraries. I also read about the SMC firmware and the computer's sleep cycle so that sort of made sense. But I seriously need advice from someone a lot smarter than me. So, before you ask, both iTunes and my SMC firmware are up to date. I'm running a mid-2007 iMac Intel Core 2 Duo Processor with 2.4 GHz of speed.
You may not need all this junk, but in case you do, since the message tells me to make room and delete files, here goes. Now, if I need to make space and delete files, this is where I get confused and it's probably very simple but I'm still a relatively new Mac user and I still can't seem to find all the info about my Mac! I'm not exactly sure how much space I have left on my hard drive. I had to replace my hard drive last December and the invoice says it is a 500 GB 7200 SATA hard drive. For some reason I thought I had more than that. Regardless, System Profiler shows 10.26 GB currently available, 499.76 used; I assume that the used portion includes my partitioned drive that has my virtual machine on it? I may be using the wrong language when calling it that but that's how I understand it as a "partitioned drive". Now, when looking at the System Profiler, under Volumes, Capacity 209 MB writable diskOs1 - I think this my Virtual Machine. I also have three Western Digital drives that I use for Time Machine and for pictures and music; however, as I said, I am still new with Macs and do not fully understand the file structure so there may be pictures on my Mac hard drive that are duplicated on 1 or more of my WD drives but I don't know how to find them or if I do, I'm afraid to delete them. Of these WD external drives, 1 is 500 GB and is full with Time Machine backups; the 2nd WD drive is 3 TB and has 2.18 TB available and is currently being used for Time Machine backups; the final WD drive is 1 TB Firewire and currently has 694.33 GB available.
Any help would be appreciated. Please forgive any inaccurate terms or mis-statements of terminology as I do not really know what I'm talking about as far as the pieces and parts of the operating system; I'm just trying my best to describe what I see.
One more piece of advice that I would appreciate would be recommendations about a good file cleaner, for duplicates, messy file structure, space utilization software; it also needs to be idiot proof software. I have a trial version of Appdelete that I never really used and I have the purchased version of Tune Up My Mac that I haven't spent much time with because I'm afraid I'll delete something I shouldn't
Thank you for your help
MemalynHi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt -
Need to make some fields mandatory in standard transaction XK01
HI All,
Is it possiable to make some fields in standard transaction like XK01 mandatory?
or any work around ?
thank in advance for your replies.
Regads,
Riyaz.Hi,
From configuration(SPRO) u can easily make some fields mandatory in XK01. Otherwise create a transaction varition for XK01 using TC SHD0.
Rewards points if helpful.
Regards,
Srinivas Ch -
I urgently need to make some audio tracks from videos using the new 2013 GarageBand. In iLife11 Garageband, this was very easy. However, I cannot see how to do it in the new one. The alternative might be to revert to the iLife11 version, so does anyone know how to do this. It's extremely urgent since I need to produce these for a court custody hearing which will take place at 0800 GMT UK time on 31st October 2013. Please help.
Thank you.When you drag a movie from the Media Browser to the Time lIne in GarageBand, you will see a pop-up "Extracting Audio".
The Movie and the audio file will appear in separate tracks. You can copy the audio region from the sound track to a different track to keep it safe and then hide the Movie track.
Léonie -
How to make some fields of a view non editable
Hi experts,
I need to make some fields like system user, system time and system date of a view non editable and after saving values for all other editable fields, the system should fill the values for the non editable fields as well.
Kindly help in this regard.I am assuming that you created a maintenance view for your table. Under view fields there is a column called 'Maintenance Attribute for view field' (one character field with 'P' in the column. Set that column value to 'H' for the fields that you want to hide.
You then have to go to SE54, give your maintenance view name, in the menu, 'Environment-->Events' create an event 01 with your own code to fill in those hidden fields. Look with key words 'Table Events' in this forum and you will get a lot of examples. -
How to make some rows uneditable
Hi All,
I need to make some of the rows as un editable while the other rows should be allowed for edition.
This issue was already posted in forum and was successfully resolved.
But since i never worked on this, i need to know how to go ahead with this.
Awaiting an early and positive response.
Thanks in advance
UpendraHi Mani / Vikram,
I really dont know about which table i am using.
I can explain my problem in detail.
I hope you know about Oracle Time and Labor -> Time entry OA Pages.
We are using self service timecard in which our timecard layout is Projects timecard layout.
When we select a timecard that was already entered for a particular period and when we try to edit it, we can edit all the time hours entered for all projects.
But my requirement is that once the time is entered against particular projects, it should not be allowed for edition.
I can provide all the details, if any, you required in this regard.
Thanks in advance
Upendra -
Hi,
I Would like to know what I need to do to make work iWork"09 with my portable which has mac OS Lion 10.7.5 ; it does non open it because it says I need to do some updates but how can I do it if it does not open it ?
Thank YouWILL ANYONE ANSWER MY QUESTION? WHAT DO I HAVE TO DO TO GET A REPLY FOR MY CONUNDRUM/
-
I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?
Hello waitingone,
please try this (all terms are translated from my German programs to my best knowledge):
1. Did the creator of the pdf file enable the import options?
2. See import options: choose an other visibility option for your layer.
3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
4. See trimming: try the different modes there. Often works: "Media".
5. Is the pdf file (eg from Word) correctly created?
6. Is the PDF file protected? >>> no import possible.
7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
Good luck!
Hans-Günter -
HI, I need to jre 1.6 update 26 on my mac system to make some aaplication work. However latest available is jre 1.6 update 29. Could you suggest how I can get jre 1.6 update 26? I tried downloading older version on java. COuldn't find it on your site.
What are you missing?
I inherited this app and signing the third party jars is how it was setup, I was wondering the same thing too, why was it necessary to sign the third party jars?
The applet runs in either JRE 1.6.0_13 or JRE 1.6.0_27 depending on the other Java apps the user uses. JRE 1.6.0_13 does not have the mixed code security (so it is like is disable), but JRE 1.6.0_27 does have the mixed code security and the applet will not launch with mixed code security enable, so we have to disable it. With all the hacking going on in the last two years, is important to improve security; so this is a must.
Yes, I always clear up the cache.
Any idea on how to resolve this problem? -
Why do we need to make Delta Green some times
Hello Exoerts,
Today a delta was running for a long time and i killed the job in source and made the delta red and repeated again,
when discussing with some senior colleagues, they said, you should not make delta always red. Is there any situation like
we need to make delta green and request for another delta. I dont understand the total scenario.
Can any one explain me.
Full points assured **
Thanks in advanceIf we records were showing zero, they asked me to do red and then go for new delta again
and more situation like, the job has not yet created in source system for some reason and the delta got failed , even in this scenario, they asked me to do Green.
I am not sure about this..
Just want to confrim .
Please let me know..
Thanks -
we are trying to sync apps, music etc. to my IPod touch but it is saying there is not enough room to upload the apps etc. from our ITunes library on my PC. Are we able to purchase more space for example on ICLOUD for more storage or do we need to delete some of the items so there is enough room for the things we really want.
Also, if we do need to delete some of the stuff now on IPod touch, how do I find out how much space is used up by each item so we can delete necessary items to make enough space?
Thank you,
KellyfunpassYou need to delete some items from the iPod. After you install the app you can redownload then as storage space allows, by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
To download and install an app you need storage available equal to about three times the file download size. -
AR I Need To Make Group or batch for some of transactions that imported ??
Hi,
In Receivables i need make a group or batch for some of invoices that imported from another system (Point of sales)
what functionality or responsibility make this function like batch but i need to import some invoice fo batch not create batch and create invoices
Thanks,
Mohamed GamalI think it's better to start with Ubuntu or another user-friendly distro than try your hand at Arch. A lot of the things you talk about reveal a lack of knowledge about the inner workings of Linux (no offense; that's just how it is). Linux distros are extremely modular, and GUIs are interchangeable. Aesthetics, therefor, are as well. You can install Ubuntu, OpenSuSE, Fedora and Arch and get them to look identical.
As for creating your custom distro, I am not sure distros would like you to strip logos and stuff (which, for consistency, at some point, might also involve copyrights - you do not want your boot logo to say 'Customix - (c) Ubuntu Canonical' or something).
If there are projects around that allow you to change the aesthetics (which seems to be mostly what you're after), then by all means use those . Hacking scripts etc. for consistency can be a tedious job, if you are not comfortable with command line tools. It will only be harder to (re)brand Arch since it comes with the minimal amount of branding required upstream.
The DE menus are ordered by XDG standards. It's fully automatic. If you want to change that, you need to hack the .desktop files.
Last edited by .:B:. (2012-01-16 19:51:01) -
When I plug in my Lacie (thunderbolt) External Drive it doesn't show up on the desktop. I need to move some stuff out of my hard drive to make room. I have very little room left on the hard drive and need to move an iPhoto library.
i have a lacie, and i encrypted it. i had to wipe it, because it kept dropping off over and over and re-logging in. so unencrypted i went.
at some point it wasn't recognized at all. sometimes disk utility would open it, but then it got to the point that it wouldn't recognize it either.
i hadn't realized that the power supply was dysfunctional. but i was able to recover it using disk warrior at the last deep breath it took. the disk itself still works, but not in that housing. -
[AS] How to make cross reference at insertion point
Hi,
I have a book ("indb") including several documents with several "anchors"
(german translation: "Textanker") where cross references from different documents are linked to.
What I already got is to reference all anchors and collect them in a list.
Now I would like to make a new cross reference at the insertion point
in a text frame of the active document - can't get it to run :-(
Is anybody out there who can post a AS-sample doing this?
Thanks in advance!
Here is the reference to an already existing anchor:
{hyperlink text destination id 44155 of document "kapitel 2.indd" of application "Adobe InDesign CS4"}
The code I tried to make a new cross reference looks like this - but of course doesn't work:
tell application "Adobe InDesign CS4"
tell active document
make new hyperlink with properties {name:"new hyperlink", destination:hyperlink text destination id 44155 of document "kapitel 2.indd"}
end tell
end tellThanks a lot - got it now!
Maybe it could be helpful for others to look at your answer
with the placeholders replaced by "real" strings as it was hard for me
to figure out the right form:
tell document 1
set theDest to make hyperlink text destination with properties {name:"Some name", destination text:<a reference to the relevant text>}
this line for example looks like this =>
set theDest to make hyperlink text destination with properties {name:"Some name", destination text:insertion point 902 of story id 44083 of document "kapitel 3.indd" of application "Adobe InDesign CS4"}
set theSource to make cross reference source with properties {name:"Some name",source text:< reference to the relevant text>}
this line for example looks like this =>
set theSource to make cross reference source with properties {name:"Some name", source text:cursorPosition, applied format:cross reference format id 44305 of document "kapitel 1.indd" of application "Adobe InDesign CS4"}
where "cursorPosition" was defined before by
set cursorPosition to object reference of selection
(the cross reference source needs the applied format reference too)
make hyperlink with properties {source:theSource, destination:theDest, visible:true, highlight:invert, width:thick, border color:dark green, border style:dashed, name:"Whatever" }
this line for example looks like this =>
make hyperlink with properties {source:theSource, destination:hyperlink text destination id 44184 of document "kapitel 3.indd" of application "Adobe InDesign CS4", border color:black, highlight:none, border style:solid, hidden:false, visible:true, width:thin}
end tell
Maybe you are looking for
-
Wireless-N hardware and software issues
Yep the 300N gear goes back to BBuy tomorrow. I purchased a V1 of the wrt54G hardware almost 3 years ago, it died last week. Figured I’d buy the latest and greatest and be all set for another couple of years. Well I’ve had similar problems as the pos
-
Saving in Excel formatting the charts. please help...
Post Author: ranjan.sahoo CA Forum: Deployment Hi, while i am trying to save the charts in Excel,its showing a deviation from .rep to .xls. Description about Chart:- Chart is like in Y axis we have percentage like 60%,80%,100%, in X-axis we Rece
-
Exchange rate for PO documents
Friends, We have created an import PO with currency EUR. We have not given any conversion rate in PO. System is picking some conversion value in INR. From where it is getting convered. I have checked OB08. There is no such EUR to INR conversion r
-
Hi, I'm working on a video to be posted on internet, in a "webtv" that uses videos with the format of 396 x 270. I filmed in a HD camara, 1920 x 1080. I'm setting the sequence to 792 x 540 (twice the size of the webtv screen just because if later I d
-
Hello, We have one report which consists of several complex queries and summary details.For certian parameter values,the report output will be more than 5000 pages.When the report is run for those parameter values, report designer is getting crahsed