I need to make VR files in PhotoStitch - free download available?

I want to download minimum that will get me the VR file creating capabilities w/out iTunes, etc.

This is what my PhotoStitch software said:
About PhotoStitch
PhotoStitch is an application program that merges images in horizontal or vertical sequences or stitches together images that have been shot in sections. You can use it to create panoramas of scenery or wrap-around 360-degree images. You can even create images of buildings that look as if they have been shot with a very wide wide-angle lens. Documents and printed materials shot in sections can be merged into single high-precision images. In addition, you can merge images that have been scanned into your computer.
The merged image can be saved in the QuickTime VR format if you obtain and install QuickTime 3 or 4. QuickTime can be downloaded from the Apple Computer, Inc., web site.
NOTE : Please select the package that includes all the files when downloading the QuickTime software. The QuickTime VR program and the program for saving QuickTime format files must be installed together to save images in the QuickTime VR format.

Similar Messages

Have a melody recorder on guitar (AIFF audio file) need to make midi file.

Have a melody recorder on guitar (AIFF audio file) need to make midi file.
so i can change the guitar melody into a synth melody.
any input?
thanks, technoreid

You cannot make midi from audio with GB. You'd need a sampler.

URGENT: Need to make ppt files in applet

Hi,
I need to read ppt files from client machine from applet and create a new ppt file at client's machine. Can i do this with signed applets ?
Also from where i can get ppt java library in order to create ppt files ?
Thanks in advance.

what filetype is ppt??
is it microsoft powerpoint - if so: http://jakarta.apache.org then check the POI project and let me know if it worked!

Need to make this file smaller!

I'm a musician looking to put my tracks on myspace. The maximum file size for myspace is 6mb, and my export to iTunes is 72mb! What can I do?

shippo,
When you reference "50 fps", do you happen to know if that's fields per second or frames per second? Depending on the answer to that, you may or may not need to adjust that.
When it comes to file size, you have frame rate, frame size, compression type and data transfer rate affecting the final size.
As Russ and darby have suggested, data transfer rate is the main thing to experiment with (since you're publishing for Vimeo, the other setting are pretty much locked in).
I have found that when it comes to playing with the bit rate, a video with a 1280 by 720 frame size needs between 4,000 kilobits per second and 5,000 kilobits per second to maintian good image quality. While you might get good results at a lower rate, high contrast areas in the picture are very, very, very likely to show loss of image quality.
If you need to get your video up asap, start the upload late at night. As long as your internet connection doesn't drop out (knock on wood), you file will be uploaded by the morning.
Also, (for what it's worth) is there any place close by that has fast internet that you could use? If you have access to a computer lab at a local community college, a 1GB file will probably upload in minutes rather than hours.
-Warren

Need to get large file sizes down to downloadable sizes-how?

I am using Compressor 4 and have several professional videos I produced with Final Cut Studio in QuickTime/.MOV format using ProRes 442. They are all 720p and of course, all have large file sizes. I needed to convert them so they are compatible with iTunes as well as Apple devices (AppleTV, iPad/iPod/iPhone, etc). They also need to be downloadable in a reasonable time and I of course want to maintain a quality image. Several of the videos are about an hour long, some a little more.
I an unable to get most of these files to be small enough for practical download and still maintain an acceptable quality. For example:
I have one video (QuickTime rendered from FCPS) that runs 54 minutes. 1280x720, ProRess 422, Linear PCM with a Bit rate of 72.662. The best I seem to be able to get out of compressor is to use the setting options for "HD for Apple Devices (5 Mbs)" which gives me a file that's just over 2Gb. Not bad, and the quality is still very good, but the file size is just too big for people to download. I get reports of people getting estimates of 77 hours to download this one file.
I did try using the setting under Video Sharing Services / Large 540p Video Sharing just to see what it would give me, but it really wasn't that much smaller and the quality was noticeably degraded.
I'm confused as to what to do about this. I have downloaded things from iTunes before that are good quality, about an hour and their file sizes are simply bnot this big.
Can anyone give me some advice? Thank you. Grateful for anything you can offer.
MC

If you're not concerned with precise average bitrate, use h.264 codec, set bitrate to "automatic" and use the quality slider. Be sure to have "keyframes" on "automatic"; every 24 frames or so makes h.264 quite inefficient and is only useful for live-streaming, where you want people to be able to resynchronise as quickly as possible. Having multi-pass enabled might help, but I'm not sure what it does when using constant-quality encoding.
Do a test-encoding of a representative clip of maybe about rwo minutes or so, play with the quality slider and see how far down you can go and still be satisfied with the quality. Using "automatic" bitrate uses as many bits to encode each frame as is necessary to get the required quality, and file sizes will vary depending on the type of material. Complex textures and high motion will use more bits, still frames and slow pans will use very little.
A light chroma-channel denoising may help improve perceived quality, as may very light sharpening in case you scaled down the material.
If you're still not happy with the bitrate vs. quality tradeoff, try reducing the resolution, but generally you should get 720p down to around 2.5 to 3.0 Mbps with adequate quality.
On the other hand, If someone needs 77 hours to download 2 GB, they have another problem anyway. That sounds like a 56k modem connection. What's he doing trying to download HD content anyway?
Bernd

What makes a file open automatically after download? I'm trying to stop it. I don't know whether Firefox or Sumatra controls this.

When I downloaded a .pdf file, it opens automatically after download. I want to put it back to where I have to click on it in the download window in order to open it.
This happens with every .pdf file I download.
I am using Sumatra 1.5.1 to view pdf files.

http://support.mozilla.com/en-US/kb/Managing+file+types
Change the '''Action''' for that file type.

I downloaded the upgrades to itunes and then i was told i needed to load a file msvcr80.dll i downloaded that and now i have a runtime problem i need to fix R6034. How do i fix this and not loose all my songs?

I downloaded the upgrades for itunes and it then said i had to download MSVCR80.dll i think i downloaded that but now i have a runtime issue of R6034. How do i get my itunes to work again without loosing anything?

Check out the user tip below.
https://discussions.apple.com/docs/DOC-6562

HT5090 i have a macbook pro and it will not let me open the file for the free download trail of final cut pro? Do any one know why?

can I use my macbook pro with final cut pro

I believe there is a problem with the download system at the moment.
Try later.

Make ipa file of many swf files, combinely

Hii, i;m making small ipad applications using cs5 and as3. they are running individually well.
But now i want to combine them as one file., means user will get only home page, and he can select any application, and can use it.
as we know we make ipa file from one swf file.
i have created one homepage, on that there r 4 images, user can click on any image and he will go to that particular apps.
i did it using (swf calling dynamically using loader function) as we did it normally. now we know that if need to work my apps, it is imp that my all apps swf file and my main homepage .swf file should be in one place, so it will run properly.
Now i need to make ipa file of that homepage.swf, how can do that so my all application will work.
If my question didnt understood, that plz let me know.
i will try to explore it.
Thank you,
Pravin G

Hi Pravin,
You can just package the other swf files along with your main swf, and it should work. For example:
adt -package -target
The restriction is that you cannot load external swfs.
Please note that all the swfs other than the homepage.swf will be interpreted. So, if you have your main code residing in these swfs, you might see some performance issues. However, if you think your application performs well, then you can just use your existing code.
Otherwise, you need to refactor your code to work from one swf.
Thanks,
Sanika

How do you make RealPlayer files?

I need to make RealPlayer files of my FCP movies. I downloaded Real Export Plug-in for Mac OsX from Real Networks. It is supposed to enable Quicktime Pro to export RealPlayer files. However it gives me a "export failed" message.
Anybody know about this?
I am running Panther and Quicktime 7.0.4. Real Export is supposed to be compatible with Panther but not Tiger.
I have Cleaner 5 and 6 but it seems like Cleaner won't convert to RealMedia unless I'm also running OS9, which I am not. I am looking into this further.
Bottom line: how can I make the RealPlayer files?
All help greatly appreciated.

Bogiesan,
Are you running Tiger? I didn't install the Real Export Plug-in on my Tiger machine because RealNetworks said it was incompatible with Tiger. If you are running Tiger then maybe I should take the plunge.
Thanks.

What do I need to do when I receive the message ". . . your startup disc is full, you need to make some room by deleting some files"

I hope I'm in the right place since I was sort of redirected here Recently I have been receiving the message that my startup disc is full and that I need to make room by deleting files. At first I received the message when I left my computer unattended with my virtual machine on, using VMWare Fusion to run Windows. Recently though, I got the message when I left my computer unattended for about 6 hours without the virtual machine running. As an aside, I get extremely nervous when anything freezes VMWare because it is usually a nightmare to get back into Windows if I can at all without calling Tech Support. This new message however, appeared without the virtual machine active, so I was relieved that VMWare most likely was not the cause. After reading a number of Tech Support articles and Community discussion questions and answers, I started wondering if iTunes or the SMC firmware or a combination thereof may be causing the problems. Mind you I know nothing about the SMC stuff because as I said, I am really new to Mac and know very little about computer code or processors or any of that stuff. But I do know that iTunes has recently been giving me some trouble, such as opening on start up and I can't figure out why and messing around with my iTunes libraries. I also read about the SMC firmware and the computer's sleep cycle so that sort of made sense. But I seriously need advice from someone a lot smarter than me. So, before you ask, both iTunes and my SMC firmware are up to date. I'm running a mid-2007 iMac Intel Core 2 Duo Processor with 2.4 GHz of speed.
You may not need all this junk, but in case you do, since the message tells me to make room and delete files, here goes. Now, if I need to make space and delete files, this is where I get confused and it's probably very simple but I'm still a relatively new Mac user and I still can't seem to find all the info about my Mac! I'm not exactly sure how much space I have left on my hard drive. I had to replace my hard drive last December and the invoice says it is a 500 GB 7200 SATA hard drive. For some reason I thought I had more than that. Regardless, System Profiler shows 10.26 GB currently available, 499.76 used; I assume that the used portion includes my partitioned drive that has my virtual machine on it? I may be using the wrong language when calling it that but that's how I understand it as a "partitioned drive". Now, when looking at the System Profiler, under Volumes, Capacity 209 MB writable diskOs1 - I think this my Virtual Machine. I also have three Western Digital drives that I use for Time Machine and for pictures and music; however, as I said, I am still new with Macs and do not fully understand the file structure so there may be pictures on my Mac hard drive that are duplicated on 1 or more of my WD drives but I don't know how to find them or if I do, I'm afraid to delete them. Of these WD external drives, 1 is 500 GB and is full with Time Machine backups; the 2nd WD drive is 3 TB and has 2.18 TB available and is currently being used for Time Machine backups; the final WD drive is 1 TB Firewire and currently has 694.33 GB available.
Any help would be appreciated. Please forgive any inaccurate terms or mis-statements of terminology as I do not really know what I'm talking about as far as the pieces and parts of the operating system; I'm just trying my best to describe what I see.
One more piece of advice that I would appreciate would be recommendations about a good file cleaner, for duplicates, messy file structure, space utilization software; it also needs to be idiot proof software. I have a trial version of Appdelete that I never really used and I have the purchased version of Tune Up My Mac that I haven't spent much time with because I'm afraid I'll delete something I shouldn't
Thank you for your help
Memalyn

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

I need to make a pdf document, made in photoshop, 'page turn' and then add it to my website. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

Hello waitingone,
please try this (all terms are translated from my German programs to my best knowledge):
1. Did the creator of the pdf file enable the import options?
2. See import options: choose an other visibility option for your layer.
3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
4. See trimming: try the different modes there. Often works: "Media".
5. Is the pdf file (eg from Word) correctly created?
6. Is the PDF file protected? >>> no import possible.
7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
Good luck!
Hans-Günter

I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. What is the best way to do this

I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. Even when I save it, the image quality at minimum the file size is 10.9 MB. What is the best way to do this

@Barbara – What purpose is that PDF for? Print? Web?
If web purpose, you could convert CMYK images to sRGB. That would reduce the file size as well.
A final resort to bring down file size is:
1. Print to PostScript
2. Distill to PDF
That would bring file size down even more. About 20%, depending on the images and other contents you are using, compared with the Acrobat Pro method. If you like you could send me a personal message, so we could exchange mail addresses. I could test for you. Just provide the highres PDF without any downsampling and transparency intact. Best provide a PDF/X-4.
I will place the PDF in InDesign, print to PostScript, distill to PDF.
Uwe

Does anyone know how to separate a movie track from an audio track on the new Mavericks Garage band. It used to be very easy on the iLife 11 version. If anyone could respond ASAP I'd be grateful. I need to make an audio file from a video.

I urgently need to make some audio tracks from videos using the new 2013 GarageBand. In iLife11 Garageband, this was very easy. However, I cannot see how to do it in the new one. The alternative might be to revert to the iLife11 version, so does anyone know how to do this. It's extremely urgent since I need to produce these for a court custody hearing which will take place at 0800 GMT UK time on 31st October 2013. Please help.
Thank you.

When you drag a movie from the Media Browser to the Time lIne in GarageBand, you will see a pop-up "Extracting Audio".
The Movie and the audio file will appear in separate tracks. You can copy the audio region from the sound track to a different track to keep it safe and then hide the Movie track.
Léonie

Am running Tiger 10.4.11; just got Snow Leopard 10.6.3 (regular OS disk, not an upgrade); when I install Snow Leopard, will it wipe everything? overwrite Tiger? Do I need to make backups of applications and files to reinstall after Sno Lprd loads? thx!

Am running Tiger 10.4.11; just got Snow Leopard 10.6.3 (regular OS disk, not upgrade). When I install Snow Leopard, will it wipe everything? overwrite Tiger? Do I need to make backups of applications and files to reinstall after Snow Leopard Loads? thanks!

Hi Donald,
No it doesn't erase anything by default, it does what we used to call an Archive and Install feature, which can give you a new OS, yet preserve your files and settings if you have enough room on your HD...
http://docs.info.apple.com/article.html?artnum=107120
But it does it automatically unless you specifically erase the Disk, but will replace Tiger completely for the OS & several Apple Apps like Safari, Mail, etc, yet preserve your old settings for those!
If you think you may need Tiger to run any APPs that do not work in SL/10.6, then clone or backup first.
I would recomend 2 things before installing though...
Make sure you have enough RAM & HD space.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
"Try Disk Utility
1. Insert the new Mac OS X SL/10.6 Install Disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214

I need to make VR files in PhotoStitch - free download available?

Similar Messages

Maybe you are looking for