I need to order old Mac Mini Install discs

I hear I can order from Apple, i need a phone number.
I have a 1.5 Gh 2005 Mac Mini

Be sure to have your product's Serial Number, & a credit card, handy.
If the unit is too old, they may not be able to provide you a disc set.
Some discs, likely for early intel-based Mac, w/ Tiger & Leopard OS X
originally, were said to be available from Apple support or applecare.
These were shown by those who got some, to be white label replace-
ment install discs, at about $16 each or so. Subject to availability.
Good luck & happy computing!

Similar Messages

  • Using a Mac Mini install disc (10.4.6) to upgrade a Power PC G4 (10.3.9)

    Hello everyone,
    I would appreciate a little advice if possible...
    I am wondering if I can use the "system install discs"
    (intel-based system 10.4.6) that came with my new Mac Mini,
    to upgrade my older Power PC G4 currently running system 10.3.9?
    I wish to have both computers running the same system.
    I tried inserting the first (Mac mini system 10.4.6) install disc into my G4, and had a kernel panic...
    couldn't reboot, and after many tries I had to manually eject the DVD.
    Any advice and tips to lead me through this??????
    THANKS!!!!!!!!
    Power PC and Mac Mini   Mac OS X (10.4.6)  
    Power PC (10.3.9) and Mac Mini (10.4.6)   Mac OS X (10.4.6)  

    nipnkep,
    No, you can't do it that way.
    The install disks are system-specific, and Intel system disks don't work on PPC Macs.
    Your software license also doesn't permit installation on multiple Macs.
    You could buy the retail version of Tiger, or you could wait a few months and buy a "Family Pack" retail version of Leopard, which will allow you to install OS X on up to five Macs in the same household.
    -Wayne

  • Can I install Snow Leopard on an old mac mini?

    Hi, my parents have an old mac mini and they have bought a new camera to use for Skype, but it won't work on their current OS (Panther or Tiger I think).
    So, can I install a newer operating system on the old mac?
    Thanks

    Shlubtastic wrote:
    how about Leopard 10.5?
    10.5.8 is fine. Obtaining it may be more difficult.
    You'll need a Leopard retail install disk.
    This info is provided by TexasMacMan, with updates from me;
    Mac OS X 10.5 Leopard installation system requirements
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). {Note - this is now very unlikely, but no harm in asking}.
    If you can't obtain a retail install DVD from Apple, look on Amazon MP, eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
    MB427Z/A  Leopard 10.5.1 install DVD
    MB576Z/A  Leopard 10.5.4 install DVD
    MB021Z/A , MC094Z/A  Leopard 10.5.6 install DVD (single user)
    MB022Z/A , MC095Z/A Leopard 10.5.6 install DVD (5-user family pack)
    {the bold order numbers are the later ones}
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    {This is still available on Support Downloads}

  • I am confused about Icloud. I have a 5 year old Macbook, a 2 year old macbook and a 5 year old mac mini. What exactly do I need to do to get all this connected via Icloud. I also have an Iphone 3G. Help please!

    I am confused about Icloud. I have a 5 year old Macbook, a 2 year old macbook and a 5 year old mac mini. What exactly do I need to do to get all this connected via Icloud. I also have an Iphone 3G. Help please! Also, I still don't understand exactly what the benefits are. At the moment it seems a lot of hassle to change a system that's been working perfectly well and that I'm very happy with. I'm not at all sure whether the mac mini (1.66 GHz INtel Core Duo) can be brought up to the relevant spec to run ICloud.  Any thoughts?

    There are two aspects to iCloud.  One is simply getting an account, or migrating a mobileme account to iCloud.  The second part is using the various features of iCloud to sync contacts, calendars, use music match or photo sharing, and store iWorks documents.
    First to get an iCloud account:
    If you have a mobileme account, you can migrate by simply logging onto www.icloud.com (ignore any references to Lion and just click through to complete the migration).  If you have OS X Lion or an iOS 5 mobile device, you can create an iCloud account on that device using any valid AppleID.
    Once you have an account, you can use JUST the mail account if you wishi - it is a standard IMAP account so you would set it up like any other IMAP email account you have, in whatever client program you use to read email.
    To use the OTHER feautes of iCloud, your computers will have to be running OS X Lion (10.7).  Your iPhone 3G will never be able to use iCloud as it cannot run iOS 5 (you need a min. of an iPhone 3GS to run iOS 5).
    The requirements for OS X Lion are here - http://www.apple.com/macosx/specs.html  You need a min. of a Core 2 duo processor so you mini is not capable of running Lion.
    So, in your case, the single reasons for iCloud would be if you have a mobileme account, then use the online www.icloud.com to migrate your account so you do not lose your @me.com email address.  You can use iCloud email (without using any other iCloud features) by setting it up as IMAP mail with these settings - http://support.apple.com/kb/HT4864
    If you want an iCloud account and do NOT already have a mobileme account, you will need to upgrade one machine at least to Lion in order to be able to create an iCloud account.

  • Installing OS X 10.5.6 on an old Mac Mini (2004) has already taken 5 hours

    Hi,
    I have begun to install OSX 10.5.6 on my old Mac Mini (bought in 2004 - not an Intel version). The Mini had 10.3 (I think). The installation, which is still in progress, has so far taken 5.5 hours - there is no progress indicator etc, just a spinning beach ball, and a lot of clicking from the DVD drive. Is this to be expected, or have things gone wrong?
    all the best,
    Jeremy

    Hi Jeremy;
    If your guess is correct, then I think your Mac Mini doesn't meet specs for because I believe you need 512 MB.
    Did you backup before you started this adventure?
    If you have a backup, I would suggest stopping the install and reboot back to the old OS if possible.
    The reason I say if you have a backup is because it is possible the install has destroyed the old OS already then a backup will be required to save anything.
    Allan

  • HT1338 Why can't I install Leopard for PowerPC on my old Mac Mini?

    Why can't I install Leopard for PowerPC on my old Mac Mini? The massage "This can not be installed on this computer" appears.

    My thoughts are that your difficulties could be one of these:
    your non-retail DVD may only work on a very limited range of Mac minis
    the installer may not like your new RAM
    the installer may not like the language change especially if the disk has not been erased first
    I have seen a little evidence for 3 in the code of other Leopard install DVDs - they appear to have less stringent language checks for erased volumes. Whilst I have never modified model specific installers I have modified retail installers to ignore speed and RAM checks.
    My advice:
    back up your whole mini hard disk to an external disk - see notes
    erase the hard disk and partition into 2 volumes with Leopard install DVD
    try to install Leopard on one volume
    put original OS on the other volume
    Notes:
    Carbon Copy Cloner can be used to backup the whole hard disk
    ensure the mini can be booted from the external disk before you erase the internal disk

  • Need help!!!! I've got an old mac mini G4 and while adding a cd to itunes, there was a power shortage to the house. Now when I try to reboot I get three beeps and the CD is still stuck in the mac. How do I get the CD out and is that why I am getting beeps

    Need help!!!! I've got an old mac mini G4 and while adding a cd to itunes, there was a power shortage to the house. Now when I try to reboot I get three beeps and the CD is still stuck in the mac. How do I get the CD out and is that why I am getting the three beeps?

    If you can't eject a CD or DVD or open the drive tray
    How do I eject a defective DVD?: Apple Support Communities
    How to eject a CD on a MAC mini with PC keyboard and mouse « FAQforge
    From:
    Mac computers: About startup tones
    3 successive tones, a 5 second pause (repeating): This indicates RAM does not pass a data intregrity check.
    1 long tone while holding down the power button: Indicates an EFI ROM update is in progress on a computer manufactured before 2012.
    3 long tones, 3 short tones, 3 long tones: Indicates EFI ROM corruption is detected and the computer is in EFI ROM recovery mode.

  • I updated my old mac Mini to OSX10.5 (Leopard) and installed the latest version of Firefox, only to get a message that it 'is not compatible with this architecture'. Any suggestions on how to get a superior web browser back?

    Upgraded old Mac mini (from 10.4 to 10.6) PowerPC G4 Processor, downloaded latest version of Firefox and ran installer, got a dialogue box that said 'not compatible with this architecture', now I don't have Firefox at all, and it is my preferred browser.

    Firefox '''4 versions and later do not run on a PowerPC Mac''' and require at least OS X 10.5 and an '''Intel Mac'''.
    The''' latest supported version for your os is 3.6.26''' , you can download it from:
    http://www.mozilla.org/en-US/firefox/all-older.html
    see for more info:
    [http://www.mozilla.org/en-US/firefox/3.6/system-requirements/ Firefox 3.6 System Requirements]
    [http://www.mozilla.org/en-US/firefox/10.0.1/system-requirements/ Firefox 10.0.1 System Requirements]
    [For older Macs that aren't supported in Firefox 4+ versions, if you like, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8]
    http://www.floodgap.com/software/tenfourfox/
    http://tenfourfox.blogspot.com/
    https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Can I use my old MAC MINI as a hard drive, or do I need to transfer all the data to a new Mini?

    I would like to get the new MAC MINI, but I was wondering whether I could somehow just keep my old mac mini as a storage drive and continue to use its DVD drive since the new mini doesn't have one.  Has anyone out there done this?  If not, what is the best way to transfer data from one mini to another?

    See Here for Transferring from Old to New...
    http://web.me.com/pondini/AppleTips/Setup.html

  • I have an 6 year old mac mini having issues. I can turn it on, get the apple logo and blue screen and nothing else.....help!!

    i have an 6 year old mac mini with issues that started two weeks ago. I can turn it on , get blue screen and turning circle and nothing else......help !

    Hi,
    Have you tried some of these? http://support.apple.com/kb/ht1533
    The first things I would try would be to press shift during start up, this will boot into safe mode.
    I think you'll need to purchase a copy of Snow Leopard to re-install the OS.
    There's another couple of suggestions here; http://support.apple.com/kb/TS1417 where you can boot into single user mode and look at repairing disk permissions if that's the problem.
    I would hope that if you could boot into safe mode or single user mode, then that may automatically rectify your current issue. If not, then I'm pretty certain that a fresh install will be the ultimate answer.

  • Need to boot broken Mac-Mini using retail Snow Leopard 10.6 DVD

    Hi,
    In Summary:
    ==========
    I have Mac Mini (late 2009) which does not boot anymore and I need to install Snow Leopard using retail DVD (version 10.6). The OS/installer from the DVD does not seem to boot either. I always very much appreciate the efforts of true geeks. So please, any casual beginner, please do not demoralize with something like "cannot be done" etc.
    The complete story:
    ==================
    The start of the problem:
    1. All of a sudden, one fine day, on start up, my Mac Mini strated to shut itself down without no apparent reason to me. When trying to boot, it would show a progress bar for about 5 minutes - I am assuming that was disk-consistency check being performed. My best guess is that right after the use of Carbon-Copy Cloner (but I am not 100% sure) it all strated to happen.
    2. Performed Mac's Disk-Util check and [Verify Volume] used to display "invalid directory item count, should be 31 instead of 29". Surface scan said disk hardware is 100% fine. Volume Repair never worked, since OS X was installed on the primary disk. I lost the DVDs that came with this Mac Mini, so the option to boot from that DVD and launch Disk Util etc. was not possible.
    TechTool Pro - No Help:
    3. Started googling and had to choose between [TechTool Pro] and [Disk Warrior], opted for TechTool Pro. Tried its bootable DVD only to learn that TechTool Pro cannot fix it. Again, it's surface scan suggested disk hardware is 100% fine. Sent the details to TechTool Pro support team, they couldn't help either after a couple of e-mails+data exchange. (How do I claim my lost money with TechTool Pro - suggestions appreciated as well).
    Googling / Mac Forums:
    4. Started looking into forums, learnt that someone had successfully repaired this problem using Ubuntu 11.04 install DVD (i.e., without installing the Ubuntu, but just using its 'try from DVD' feature). I had that handy, but forgot to disable HFS+ journaling before attempting to fix the problem. Anyway, attempting volume repair that way couldn't fix the problem as well. However this step took away my ability to boot from Mac.
    5. However using Ubuntu's bootable disk, I could access Mac-HDDs contents - and was able to successfully back-up *all* my important data.
    6. Googled and learnt that just attempting to boot using Ubuntu DVD can take away ability to boot using Mac bootable media - possibly due to EFI internals. Suspecting EFI is now corrupt, I tried other 'hacks' like:
      6.1 eEFIt Boot Disk - which does not work at all,
      6.2 Empire EFI w/ Chameleon - not sure how to proceed with options presented - trying either does not work,
      6.3 Super GRUB2 - boots fine, but attempting to boot from Mac-HDD fails after a couple of seconds,
      6.4 Boot-132 - boots fine, prompt asks for input, but then I cannot eject/replace the DVD due to Mac-Mini (lack of) design,
      6.5 Ubuntu 11.04 / 11.10 - still boots fine - just that I cannot go into Mac-OS-X from here,
      6.6 TechTool Pro bootable DVD - which used to boot fine earlier stopped to boot.
    As you can see, none worked successfully. So I didn't yet try other popular rescue media - as I suspect that is not the direction I need to go into.
    >> Looks like most of my problems are due to the fact that I have Mac-Mini which does not allow eject/replace of DVD from command prompt / out side of Mac-OS-X.
    7. Tried emptying EFI partition, playing with EFI/Mac-OS partitions boot flags, Zapping the PRAM, nothing still allows me to boot either from Mac-HDD or any Mac-Bootable-DVD.
    Current State:
    8. Now while boot time, Mac displays a gray screen for a few seconds, and then a blinking prompt on black background. That's it!
    Snow Leopard 10.6 Retail Install DVD:
    9. Went to Mac store and bought this DVD only to witness that I can't boot from it as well. (This is a huge shocker, how is Apple able to sell these DVDs if these don't work on genuine MacMini itself. After all we are able to boot from and install Windows/Linux on a variety of Machines).
    I am hoping for a very small step/fix that I am missing, since I can still see and access all Mac-HDD contents after booting from Ubuntu bootable DVD. However I am prepared for a good amount of exercise as well - assuming someone posts a valid/verified fix.
    Things available right now:
    ==========================
    A. Genuine Mac-Mini (Late 2009) who lost it's ability to boot either from its HDD or Mac-bootable DVDs (TechTools Pro, Mac OS X retail DVD)
    B. Mac OS X 10.6 Retail DVD
    C. NOT AVAILABLE - DVD that came with this Mac-Mini
    D. Variety of rescue DVDs, listed in section 6 above
    E. Another machine/PC with Ubuntu 11.04 - giving me ability to access internet
    Thanks for reading.
    Zita

    I had a similar discussion recently with another user.
    Your Mac mini (late 2009) originally came with Mac OS X 10.6.2 build 10A432 or build 10C2234 see http://support.apple.com/kb/HT1159 it would have come with an original install disc specific to your model of Mac which you could use to run Disk Utility from or to do a complete reinstall.
    The retail boxed copy of Mac OS X 10.6 (Snow Leopard) was originally intended for older Macs which had previously come with Mac OS X 10.5 or 10.4. It would have on it a version of Mac OS X 10.6 or 10.6.1 which would be able to boot these older Macs, but had no need to boot newer Macs which were released after the launch of Mac OS X 10.6 since all those newer Macs already shipped with their own discs.
    So it is normal that the retail boxed Snow Leopard installer does not work on your model Mac mini. You should be using the one that shipped with your Mac mini instead. I am guessing you have lost it.
    Assuming you have lost the Mac mini original disc, I can suggest the following options to try and workaround this.
    If you have another Mac, an older Mac, one that will be bootable using the retail Snow Leopard install disc you have, you could do either of the following.
    Connect an empty external GUID partitioned hard disk to this other Mac
    Boot from the retail Snow Leopard installer
    Install on to the external disk
    Once the install is complete, update it using the combo update not the one via Software Update to Mac OS X 10.6.8. This will add all the newer drivers needed to allow it to work on your newer Mac mini. You can download this combo update from here http://support.apple.com/kb/DL1399
    You can now disconnect the external drive and connect it to your Mac mini and boot from it by holding down the Option key when you turn the Mac mini on
    or a similar process if you want to wipe the Mac mini and reinstall directly on to it
    Boot the Mac mini in FireWire Target Disk Mode (see http://support.apple.com/kb/ht1661 )
    Connect the Mac mini as an external hard disk to the other older Mac
    Boot from the retail Snow Leopard installer
    Install on to the external disk
    Once the install is complete, update it using the combo update not the one via Software Update to Mac OS X 10.6.8. This will add all the newer drivers needed to allow it to work on your newer Mac mini. You can download this combo update from here http://support.apple.com/kb/DL1399
    You can now disconnect the Mac mini and boot from it as normal
    Note: While the Mac mini is connected in FireWire Target Disk mode to the second Mac, you could backup (if you don't already have a backup) any files you need to retrieve.
    If you don't have a suitable second Mac you may have to either borrow someone else's, or get the help of an Apple Store if one is in your area.

  • I had a mac mini on snow leopard but it broke.I now have a macbook pro on leopard how do I upgrade using the disks from my old mac mini

    can I use the osx disks from my old mac mini to upgrade my macbook pro so i can then get a further free upgrade

    You can not use a DVD that shipped with one Mac to load on to another. To upgrade to Snow Leopard you will need to purchase the Snow Leopard DVD.
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • I have replaced my old Mac Mini with new one.  What should I do about my Time Capsule?

    With the old Mac Mini (2009 model) I used Time Machine and a Time Capsule to back up everything on the Mac Mini itself and on external hard drive I added when I needed more storage space.  I've replaced the old Mac Mini with a 2011 model, and migrated the contents of the old one to the new one from Time Machine. 
    I'm now trying to figure out what I should do to my Time Capsule and/or Time Machine to make backups going forward of the same content, now on my new Mac Mini and same external hard drive. 
    When I go into Time Machine, it does not seem to recognise the items on the external hard drive as ones that I can backup (or not, as there were some items there that I did not and do not wish to backup to Time Capsule) through the new Mac Mini. 
    I am uncertain too whether the Time Machine/Time Capsule will recognise the items of my old Mac Mini as the same ones that are now on my new Mac Mini and save changes there, or whether it will try to save all over again all the same items, as they are now on a different computer. 
    My inclination is to clear out the contents of the Time Capsule now and start all over again.
    I have looked through information provided by Apple but not found answers to my questions.

    The situation concerning the hard drive is complicated.  It is not included in the list of Excluded Items.
    If the drive is not "Excluded", then it must be included.  That is the way that Apple's software works.
    But, nor am I given the option to select it or any of the items in it for adding to the list of Excluded Items.
    If you want to add an item to the list of Excluded items, click the + button at the bottom of the Excluded list, then navigate to select the drive to add it. Once the drive has been added, you can go back in and select the items.
    When I go into the exclude from backup area and select the hard drive, it and the items in it appear in dimmed form, but I cannot select them.
    Sorry, I do not understand what you are trying to say here.
    What I want to do, but cannot, is what I did before, select one of the items in it not to be backed up and leave the rest to be backed up
    I have no idea how you were able to do this. As long as I can remember, Time Machine will not allow you to pick and choose items on a drive to be backed up or excluded. Your option is to have the entire drive backed up, or the entire drive to not be backed up.
    have not seen the 'Quick Erase' option.
    You would use AirPort Utility to erase the Time Capsule drive. Open AirPort Utillty and click the Disks tab at the top of the screen. Then, click Erase Disk.  The Quick Erase option will appear.

  • I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro.  Does anyone know how to do this?

    I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro.  Does anyone know how to do this?

    1. Remove the drives, install them in external enclosures.
    2. Use a Firewire cable to connect to your computer. Boot the mini into Target Disk Mode - Transferring files between two computers using FireWire

  • Replacing an old Mac Mini and getting the new Mac to reference the existing iTunes account stored on a NAS drive.

    I'm getting rid of an old Mac Mini which has it's iTunes library stored on a NAS drive. I want the replacement Mac to reference and use this existing NAS stored iTunes library rather than loading the entire contents onto the new Mac. What do I need to do?

    Open iTunes with the option key pressed. You should see a window asking you to choose a library, create a library and cancel. Select choose a library and navigate to the NAS drive.

Maybe you are looking for

  • Problem with EM DB Console

    Hello - I am unable to get to port 1158 on my database server to view EM DB Console on my local web browser. This port is blocked. How can I use SSH port forwarding to get access to view the EM web pages on my browser? Thanks, Mike

  • SSRS Report - Group Totals are Zero when Group Row Hidden

    I have a report with one group called Counties. This group has a filter. I added code to produce the totals for Prior, Current and DistinctCount: Public Shared Dim grandTotal1 as Decimal = 0 Public Shared Dim CountyTotal1 as Decimal = 0 Public Functi

  • Oracle.DataAccess does not show up in VS 2008 list of data providers

    Hi I have an application which uses VB .Net 3.5 on Win 7 64bit machine with Oracle11gR2 64bit client in the machine. The problem I am facing is that Oracle.DataAccess does not come up under the Data provider drop downs in VS 2008. I have checked that

  • JFileChooser and system look and feel

    I have a problem with the GUI of my filechooser. I use system look and feel (WinNT), and when I draw the dialog, the Files of type combobox is wrong painted. The size isn't correct (too big). Any suggestions? Harald

  • A* source code

    Just wondering if there are A* source codes available to download. If there are, where can i possibly download it? Just to save some time and effort...maybe i can use it in the mobile game im developing :) thanks a lot.