I need to present my talk in two official languages.

I need to present my talk  in two official languages. I have two slideshows, one in French and another, with identical content, in English.
Is there any way to have one slideshow appear on one projection screen, and another on the other projection screen, with both slideshows controlled by the same laptop?

Keynote is unable to play back two separate presentations.
The only work around I have used is two computers feeding two projectors with a WiFI remote control which triggers both Macs at the same time.

Similar Messages

  • Talking to two devices, at the same time.

    Hi,
    I wonder you could help me with my solution.
    I'm using GPIB to talk to two devices. I need to reset and align one device A and control the device B. The process A can take up to 2 minutes. The process B is to cool off the DUT to demanded temperature and it can take up to 3 minutes to achieve the demanded temperature. To monitor these processes I use pull method and:
    for process A I use the STATPER:COND? query (is it 1?)
    for process V I use TEMP? query (get temperature, is the answer within the limits to exit?)
    Now, I do these processes one by one. But, because both the processes have to be done each time before DUT is tested (as a part of a setting up the test routine), I'd like to save some test time. Technically, both two processes are independent, I can trigger them almost at the same time and wait when the longer one finishes itself, and them move to the tests part.
    However, the first attempt of doing go was unsuccessful. When I issued the STATPER:COND? query within the connection to the device A it looks like all GPIB bus is blocked and I cannot issue the TEMP? query to the device B, as the bus seems to be waiting for the STATPER:COND? command sent to the device A to finish.
    Strange thing is that then I issue the STATPER:COND? command for first time, the device is not able to accept any other commands.
    Why?
    What is proper approach to to this test time saving?
    Solved!
    Go to Solution.

    X-Series Signal Analyzer Spectrum Analyzer Mode User's and Programmer's Reference is to be downloaded from the web.
    below are some exerpts from this manual
    you can query and interpret the details with visa write and reads and a bit of bit analysing. I have no time to search for a working example.
    How to Use the Status Registers
    A program often needs to be able to detect and manage error conditions or changes in instrument status. There are two methods you can use to programmatically access the information in status registers:
    • The polling method
    • The service request (SRQ) method
    In the polling method, the instrument has a passive role. It only tells the controller that conditions have changed when the controller asks the right question. The polling method works well if you do not need to know about changes the moment they occur. To detect a change using the polling method, the program must repeatedly read the registers.
    To monitor a condition:
    a.Determine which register contains the bit that reports the condition.
    b.Send the unique SCPI query that reads that register.
    c.Examine the bit to see if the condition has changed.
    To query the status byte register, send the command *STB? The response will be the decimal sum of the bits which are set to 1. For example, if bit number 7 and bit number 3 are set to 1, the decimal sum of the 2 bits is 128 plus 8. So the decimal value 136 is returned. The *STB command does not clear the status register. In addition to the status byte register, the status byte group also contains the service request enable register. This register lets you choose which bits in the status byte register will trigger a service request.
    Send the *SRE <integer> command where <integer> is the sum of the decimal values of the bits you want to enable plus the decimal value of bit 6. For example, assume that you want to enable bit 7 so that whenever the standard operation status register summary bit is set to 1 it will trigger a service request. Send the command
    greetings from the Netherlands

  • To reinstall Acrobat 8 Upgrade I need to present previous versions e.g. 3 and then 4 and then 5 Upgrade every time. Is there no simpler way to validate my ownership?

    To reinstall Acrobat 8 Upgrade I need to present previous versions e.g. 3 and then 4 and then 5 Upgrade every time. Is there no simpler way to validate my ownership?
    I had two laptops stolen and the reinstall is a real pain. This also applies to reformats and changeovers to Windows 7, etcetera.

    Windows 7? Then don't waste your life minutes fumbling with an Acrobat 8 - Windows 7 combination.
    If you are to be using Win 7 you'll need the current release of Acrobat (XI). "X" will function but it is no longer marketed by Adobe.
    Be well...

  • I cannot update my acrobat reader on my Windows platform in IE, Mozilla, nor Crome.  I need a person to talk to

    I cannot update my acrobat reader on my Windows platform in IE, Mozilla, nor Crome.  I need a person to talk to
    559-760-7255

    This is not how a forum works; nobody will call you back.
    Provide some details, and somebody will answer here.
    What is your Windows version?  Reader version?  What exactly means "cannot"?

  • Need to update sequence value in two table

    Hi guys
    Please help me in the below query
    I will need to insert a row in two different table
    table1
    col1 col2
    table2
    column1 column2
    the col1 in table1 will be assigned a sequence.nextval
    i need to assign the same value in table2 column 1.
    can i do it in a single insert statement

    i would do like this. INSERT ALL is the way to go...
    SQL> create sequence my_seq;
    Sequence created.
    SQL> create or replace function my_seq_fn return number
      2  as
      3  lNum number;
      4  begin
      5  select my_seq.nextval into lNum from dual;
      6  return lNum;
      7  end;
      8  /
    Function created.
    SQL> create table t1(a number, b number);
    Table created.
    SQL> create table t2(c number, d number);
    Table created.
    SQL> insert all
      2  into t1(a,b) values(seq, val1)
      3  into t2(c,d) values(seq, val2)
      4  select my_seq_fn() as seq, level+5 as val1, level+10 as val2
      5  from dual
      6  connect by level <=10;
    20 rows created.
    SQL> /
    20 rows created.
    SQL> select * from t1;
             A          B
             1          6
             2          7
             3          8
             4          9
             5         10
             6         11
             7         12
             8         13
             9         14
            10         15
            11          6
             A          B
            12          7
            13          8
            14          9
            15         10
            16         11
            17         12
            18         13
            19         14
            20         15
    20 rows selected.
    SQL> select * from t2;
             C          D
             1         11
             2         12
             3         13
             4         14
             5         15
             6         16
             7         17
             8         18
             9         19
            10         20
            11         11
             C          D
            12         12
            13         13
            14         14
            15         15
            16         16
            17         17
            18         18
            19         19
            20         20
    20 rows selected.
    SQL> select my_seq.currval from dual;
       CURRVAL
            20 Thanks,
    Karthick

  • I need Technical Presentation For WSA

    Dear all
    i need technical presentation for cisco Web Security appliance only to show the benefit , deployment type , Competitor
    i need this presentation because the audiences and speaker are technical engineer

    Hi Ahmed,
    I recommend you contact your Cisco Sales Rep for your region to get this resouce.
    -Vance

  • Can any one tell me how to talk between two controller.....

    Hi,
    Can any one tell me how to talk between two controller.....
    Help will be awarded.
    Regards,
    Gurprit Bhatia

    Hi Gurpit,
    If you want to share data between 2 controllers then you can simply do that by providing a data link between the controllers in your data modeler.
    If you want to use some methods of one controller in another then you can do it using
    wdThis.wdget<controller name>().<method name>();
    If your question is something different than this then please elaborate your requirement.
    Regards,
    Murtuza

  • I need a phone # to talk to a real live person about my photoshop PLEASE?????

    I need a phone # to talk to a real live person about my new photoshop elements 13 PLease??????

    800-833-6687
    I got this by going to adobe.com, searching for Photoshop Phone Support, and following the prompts. (I've never used it, so I have no idea whether it's any good.)
    Good luck.

  • If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this.

    If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this. Thank you.

    The DVD recorder I'm referring to is one I've use for years. It is not attached to my aging iMac in any way. I simply play the video from my camcorder (mini-dv tape based Canon HV20)  into the DVD recorder and create a DVD that can be played in any DVD player. I can only do minimum editing so what goes in is what I get. This has been fine for creating dupes of the various things I shoot.
    If I buy a new iMac (21 inch), I'd like to be able to download the video to the iMac through iMovie, work with it to whatever degree I wish, and burn it to a DVD that can also be played in any DVD player -- or to use as a master to dupe copies.
    What I'm understanding from you and others is that this would be possible if Apple had included iDVD in the software that comes with the iMac, or if I purchase the iLife Family Pack, or buy the correct version of Toast. I'm hoping I can persuade Apple to sell me an iMac with iDVD installed.
    Essentially I want to move from a basic process of creating DVD copies to the more sophisticated process of creating one from an iMac.
    Thank you again for your help and wisdom.

  • Need a Presentation on ALM & TFS

    Hi,
    I need a presentation on ALM with TFS. In which I can get the details of SDLC and association of it with ALM & TFS.

    Hi Piyush,  
    Thanks for your post.
    For ALM with TFS Server, please refer to the information in this document(Code, Work Item, Build, Test):
    https://msdn.microsoft.com/en-us/library/fda2bad5.aspx.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • OK , I have my instructional coaches creating power point presentation add audio to each slide with the presenter 10 add ins. I need these presentation converted into MP4 like you can do with adobe presenter video creator.

    Love the Adobe products first. OK , I have my instructional coaches creating power point presentation add audio to each slide with the presenter 10 add ins. I need these presentation converted into MP4 like you can do with adobe presenter video creator.

    If you import the PPT deck into Captivate it will not bring the audio from Presenter. But you can import it into Captivate after the slide deck has been imported. The audio files aren't necessarily named in a logical fashion in the source files for the presentation, so I would recommend that you publish the presentation locally and then find the 'data' folder in the published output and the audio files will be named in a way that you can infer the slide they are associated with. Not the simplest proceedure but it should be pretty painless.

  • Need to get the difference between two period

    Hi All,
    I need to get the difference of two posting period like period is in format YYYYMM.
    I need to subtract posting perid '200512' FROM '200601' how will be it possible.
    Please suggest.
    Thanks,
    Sandy

    Hi,
    YOu can also do like the following.
    Determine you first day of first period and last day of second period.
    data: first_day type datum,
          last_day type datum,
          days type i.
    first_day = date from FM RKE_GET_FIRST_DAY_IN_PERIOD  
    last_day = date from FM RKE_GET_LAST_DAY_IN_PERIOD   
    days = last_day-first_day.
    Thanks,
    Ramakrishna

  • Hello, I was going to have my presentation on my macbook air. But when I putted it up on the big screen it wasn't a normal presentation. There was two pages at the time and a timer came up. How can I fix this as fast as posible? Thank's in advance.

    Hello, I was going to have my presentation on my MacBook Air. But when I putted it up on the big screen it wasn't a normal presentation. There was two pages at the time and a timer came up. How can I fix this as fast as posible? Thank's in advance.

    Your MacBook is using the big screen as the Presenter Display, and the MacBook Air display as the Show display. Tap the 'x' key to swap them during the show.
    Here is more information about using the Presenter Display.

  • Both of my computers crashed nearly simultanesously due to mal-ware, had to erase hard drives to start over, did not have chance to de-activate either Acrobat or Creative Cloud before they crashed.  I need you to retroactively deactivate these two previou

    Both of my computers crashed nearly simultanesously due to mal-ware, had to erase hard drives to start over, did not have chance to de-activate either Acrobat or Creative Cloud before they crashed.  I need you to retroactively deactivate these two previous computers (one Dell desktop, another a Dell laptop from my university, the University Of Missouri_KC), so that I can re-install on my laptop (which has been repaired by UMKC), and the other on my new private desktop (which replaces my previous desktop, which cannot be salvaged).  I have the serial numbers of my two products, if Adobe could request them
    Please respond as soon as possible.  - Marc Garcelon, [email protected], UMKC email address: [email protected]@

    Hi Marc,
    Please refer to the help document below for deactivation:
    Activation & Deactivation Help
    Also, the creative cloud membership can only work on 2 machines. You will receive an error automatically on the third machine.
    Regards,
    Sheena

  • How to display the entire application in two different languages in apex

    Hi,
    How to display the entire application in two different languages in apex...
    For example i need to display each item in both English and Hindi..
    To achieve this initially i have the select the language otherwise the item label alone ll be displayed in both languages ...
    Anyhow how it ll be apex is it possible
    Regards,
    Pavan

    Hi pars,
    http://www.packtpub.com/sites/default/files/1346-chapter-6-creating-multilingual-apex-applications.pdf?utm_source=packtp…
    In this link also i struck in
    In page 10  of that document
    The application is now ready to be translated. Everything is in place to run it in any language imaginable.To ca ll the application in another language, change the URL of your application to the following:
    http://yourdomain:port/pls/apex/f?p=&APP_ID.:&PAGE_ID.:&SESSION_ID.:LANG:NO::FSP_LANGUAGE_PREFERENCE:nl
    This example will call the chosen page in the application and show it in the Dutch language instead of in English. To select another language change the property nl at the end of the URL to your desired language code.
    Thanks alot for ur suggestions.kindly provide more inputs..............

Maybe you are looking for