I need to press the sleep button two times

my iphone won't wake up until i press the sleep button two times..sometimes it will show the unlock screen for less than a second in one press and then again i have to press it once..is this a hardware problem? it is running ios 7.0.4

Well, that is not normal behavior. You can try user troubleshooting to see if that corrects it. The user troubleshooting steps are restart, reset, restore from backup, restore as new. A restart is just powering the device off/on. A reset, is holding the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. This will have no affect on data. A restore from backup is following this support document. http://support.apple.com/kb/HT1766. Then a restore as new is following this support document. http://support.apple.com/kb/HT1414.
Just remember that a restore as new will wipe all data from the device. Make sure you have synced everything to the computer. If this does not correct your problem, then make an appointment at the Genius Bar at Apple to have the phone checked.

Similar Messages

HT1349 i need to press the home button multiple times before it works

I bought my daughter an ipod 4th generation (with camera) about 6 months ago. Her home button is having issues - she needs to press it 3-4 times for it to work. Any idea to fix this?

Bring your phone in for service.

Why i need to press the push button twice to complete my action?

in my Push Button at WHEN-BUTTON-PRESSED trigger I wrote this code:
===================================
FORMS_DDL('CREATE TABLE DEMO (DEMO_ID NUMBER ENCRYPT USING ''AES256'' NO SALT NULL, DEMO_DATE DATE ENCRYPT USING ''AES256'' NO SALT NOT NULL)');
FORMS_DDL('CREATE UNIQUE INDEX DEMO_PK ON DEMO(DEMO_ID)');
FORMS_DDL('ALTER TABLE DEMO ADD (CONSTRAINT DEMO_PK PRIMARY KEY (DEMO_ID))');
FORMS_DDL('alter system set wallet open identified by "zaq1xsw2"');
INSERT INTO demo VALUES (84,SYSDATE);
COMMIT;
FORMS_DDL('ALTER SYSTEM SET WALLET CLOSE');
Message('Thanks for buying our program.');
Message('Thanks for buying our program.');
Go_item('DEPT.DEPTNO');
Replace_content_view('WINDOW1','CANVAS4');
===================================
but I need to press in it twice - two times - to execute the code above.
The Question is : why the code doesn't execute from first press ?

Here are some questions which should help us to help you if you provide detailed answers. Please also provide any other details which may help to illustrate the problem.
1. What is the complete Forms version you are using? Please provide the version number and not the marketing name. A version number looks like this: 10.1.2.3.0 or this 9.0.4.3.0
2. Are you running the form (the client) on the local machine or are you accessing it via something like Citrix, Desktop Sharing, etc?
3. Are you running Forms in a virtual machine (e.g. VMware, Virtual Box, etc)?
4. If you are using Forms 9.x or newer, what is the JRE or Oracle Jinitiator version you are using to run the form on the client?
5. If you are using Forms 9.x or newer, what is the browser and version you are using to run the form on the client?
6. Does any other function within the form cause the same odd behavior? If you have not tested, do so. For example, create a button with a WHEN-BUTTON-PRESSED trigger and code it to perform multiple tasks. Do you find that you have to click it more than once?

My ipdad touch screen is frozen and pressing the sleep button for 10 seconds (and longer) is having no effect. Help?

my ipdad touch screen is frozen and pressing the sleep button for 10 seconds (and longer) is having no effect. Help?

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

My ipad2 shuts down completely after I press the sleep button and does not start.... Help please

My ipad2 shuts down completely after I press the sleep button and does not start.... Help please
This started since the latest update!!!!!!!!!!!!!!

Hi Alkaf,
Welcome to Apple Support Communities.
It sounds like your iPad will not turn on. Take a look at the iPhone article linked below, it provides tips that will help resolve power issues for both iPhones and iPads.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
-Jason

My Iphone is Suddenly becom blank and only showing Apple symbol...I even tried pressing the sleep button for long..Please help me out

I have Iphone 5s 64GB and the IOS is 8.1.2
Suddenly from today morning my iphone screen has gone blank and the Apple symbol is displaying. I Tried to reset by pressing the Sleeping button but it does'nt work and its not responding to any buttons. Still it remains the same displaying apple symbol. How do i solve it..

HI,
I tried the same after seeing your reply. Now my iphone got turned On....Thanks you so much for the reply...Thanks a ton..:)

I have the iPhone 6 and after pressing the sleep button it will not come back on has this happened to anyone else

Having trouble getting my iPhone 6 to start back up after pressing the sleep button. Have anyone has this problem?

DDid you do a hard reset? Sleep button and home button together until rebot. Nothing erased.

My new iphone 5s is locked with 'Restore failed'. i have pressed the sleep button togther with the radial button the fron to restore but nothing happens except it clikc to take a photo. please help soooo fustrated?

my new iphone 5s is locked with 'Restore failed'. i have pressed the sleep button togther with the radial button the fron to restore but nothing happens except it clikc to take a photo. please help soooo fustrated?

What is the error number in the error message? To reset the phone you must press and HOLD both buttons for at least 10 seconds, and longer until an Apple logo appears.

P35 Platinum: I have to press the power button multiple times to start

Hello fellow MSI customers,
as written in the subject, I have a problem with starting my PC. When I press the power button, the computer powers on, but there is no output to the screen. In fact, my LCD stays in standby mode. I can hear the fans running, so something is going on. According to the LEDs on the mainboard, it is a memory problem.
Now I turn the computer off, using the power button (have to hold it for a few seconds). When off, I start again and everything runs as it should.
After starting, I ran memtest86 multiple times without any errors. I ran a few games, compiled some programs, installed Vista 64bit, Linux, all without any crashes or hangups. It is just the starting that makes problems. After booting it is very stable.
Seeing that it could be a memory problem, I brought another pair of memory, just to be sure. I couldn't reproduce the problem on that day! Any type of memory I put in (the one before, or the newly brought home) the computer always started on the press of the button. So I thought, OK, maybe they were not seated correctly. But, alas, two days later it is again only starting by pressing the power button three times.
What I tried:
1. Boot using only 1 piece of memory stick
2. Boot using only 1 piece of memory, but different one
3. Use another pair of memory <- worked, but on that day it also worked using my original memory
4. Disconnected everything except graphics card, to make sure it is not a power supply issue (minimized power usage)
5. Tried all of the above with a different processor
6. Used another power supply
Any other ideas?
Here are my specs:
MSI P35 platinum
Core2 Q6600
Nvidia 7900GT
4GB V-Data DDR2 800MHz <--- I think this is the problem, any experiences?
Enermax Liberty 400W
a few other things (HDDs, XFi, DVD-RW)
By the way, how can I boot from an external DVD-RW? It doesn't show in the menu when I press F11 (boot menu).
Thank you for any help, muro
And just to let a bit of steam off:
1. I had major problems with the RAID controller (not MSI fault, rather intel) - I put two disks into a RAID 0, then RAID 1 and they always failed after a few boots - member missing on both disks. I was getting angry, so I put them as normal (non RAID) disks and everything is fine since, although no RAID.
2. Installing anything except windows with an IDE DVD-RW is very hard. It took me ages until I got Ubuntu booting (there are guides on the net, google is your friend), and much longer to get grub (boot loader) working. Long story short - if you have multiple disks, use the Linux disk as the bootable, do NOT put grub on the disk where Vista is installed.
3. I have no idea, how to update the BIOS, if I had to. I'm using 1.1 that came on the board. I use 64bit Vista and Linux, none of which is supported to upgrade the BIOS. Any hints how to do it (if I needed to)?

Hello,
now today is the day I've finally received my replacement board. The good news first - it DOES work! Yepeeee!
Now some more information:
The jmicron controller seems to be missing - a screen with something about "Marvel" is shown before the intel raid screen. However, it is only visible for a fraction of second, so I cannot read it. I think it detects my IDE DVD-RW so I'm quite certain it's the replacement for jmicron. I won't miss it - it took me ages to install Linux with the jmicron controller.
The problem where I had to restart the computer sometimes because it didn't even post (RAM error) is gone. It boots just fine now.
I had an extremely long first post - about a minute, but after that it boots very fast now.
anyway, regarding some questions around here - the manual states MSI recommends using an 350W power supply. My 400W is more than enough. Please note - it is an Enermax, not one bundled with a cheap case. My cheap RAM sticks also work very well now. I did try them on different boards before, so now I know I just had a faulty board.
In the end, I can only say this: This is my 3rd board already and it's the first one that works well. As the hardware changed, I presume there were major issues with this board that lead them to make a new revision. What is strange, though, is that the revision is still 1.1, as were my previous two. I pity everybody who had the same problems as I did, but I can now say that I'm very happy about the board now.
Cheers, muro

Why do i get a square box on my home screen when i press the bottom button three times?

Why do i get a square box on my home screen when i press the bottom button three times?

You are enabling VoiceOver.
-> https://www.apple.com/accessibility/ios/voiceover/
Settings > General > Accessibility > VoiceOver and turn it off.

Help - HP Pavilion a6030.uk desktop. Have to press the power button multiple times to start up?

Hi,
I have a HP desktop computer. The model is HP Pavilion a6030.uk, Opertating system: windows vista.
My computer has had no problem at all until yesterday for some reason i had to push the power button multiple times to start it until it finally turned on and did the normal start up. Such as i would press the power button as normal to start it, but all of a sudden, it would turn off after about 2 seconds, and so I would press the power button several times and each time it would not start up and turn off, so the power button would be pressed again until it would finally turn on and start up and run as normal and seems to work fine. And it was the same today, i pressed the power button mutiple times (e.g. 6 times) until it finally started as normal.
As im not very knowledgeable or very computer/technology savvy wise in this area, please will someone help me and give me some advice/help to fix/solve this.
Thankyou for taking time to read this and any help would be much appreciated to resolving this problem.
Thanks.
This question was solved.
View Solution.

Vonbon90, welcome to the forum.
When I see these symptoms on an older computer, I believe that it may be a failed/ing power supply unit (PSU). Here is a guide that will help your troubleshoot it.
Also, you could test the memory. This can be done by removing all of the memory modules and replacing them one at a time and booting.
Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

RMBP: Sometimes, after having been shut down, i have to press the power button several times before the machine starts up. It's 3 weeks old, and this has happened 2 times now. Is there something wrong with my rMBP?

rMBP: Sometimes, after having been shut down, i have to press the power button several times before the machine starts up. It's 3 weeks old, and this has happened 2 times now. Is there something wrong with my rMBP?

Did you purchase the Mac new?
You have 14 calendar days from the time your items are delivered to initiate a return as noted here.
Even though you are past the 14 day limit, if it were me, I'd take the Mac back and explain what's going on. Your Mac should work out of the box.
message edited by: cs

Why do I need to press the CTRL-button to view my extra options in the tool panel?

strange!
all of the sudden, I don't get my extra tools in the tool bar (left) when I hit the black traingle in the right bottom corner.
It appears to be the same problem in ALL my CS4 programs.
I thought there was a conflict with my system OS X 10.6.2.
but after searching for days, I see that the extra options in the fly out menu become visible when I hold the CTRL-button and click on the black traingle.
any idea what has happened here?
karien (belgium)

thanks michael for replying,
but I didn't need to do that in the recent past!
when I simply clicked on the triangle, all the other options become visible. now, when I only click, nothing becomes visible!
now I need to click using the CTRL-button at the same time.
what has changed here?
I phoned my collegue. he doesn't need to use the ctrl-button either...
what did I miss???
greetings

I triyed to restart my ipod2. to turn it off I pressed the sleep button holding it untill the res attow appiered and I slide it then the screen went blck but the little circle is still tung around in the center as if it is doing something for 1 hor

I tried to restart my iPad2 buy turning it off as per the manual, but when the screen went black the little circle keeps turning around in the center now for around one hour. I tried to turn it back on but it does not work it is just black and the circle is turning around as if it is doing something. How can I turn it back on now. please help!!!

I fixed it , thank you for anyone who would have sent me a message. I just pressed and was holding both the sleep/wake button and the home and it worked.

HT201401 my iPhone 4s fails to turn on. When I press the sleep button the apple logo shows displays but nothing happens after that

iphone fails to turn on. The apple logo shows up but nothing happens after that

Hi Haleynichole_99!
I have an article here with some troubleshooting steps that can help you resolve this issue with your iOS device:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using the Apple Support Communities!
Cheers,
Braden

I need to press the sleep button two times

Similar Messages

Maybe you are looking for