I need to print and the printer doesn't show

my printer does not show up in the bluetooth sectino it is due tomorrow and the thing i need to print cant be saved.

I suggest you reset the SMC (with the printer off). Then restart and plug the printer in. It should be "found."
Barry
Whatever cannot be saved should be cut/pasted and then E-mailed to yourself.

Similar Messages

I have a e printer and thee printer is on the same wifi net work as the iPad, when I select print from the iPad the response is no printers. I can successfully email from my iPad to the printer. How can I make my iPad recognize the printer?

I have an e printer and the printer is on the same network as the iPad. When I attempt to print from the iPad I get a message no printers available. How can I get my iPad to recognize the e printer?

This printer has worked for me with out fail at my house. I am traveling in an RV and am at the mercy of the RV Wifi. I do not have access to the router. The printer has been recycled a number of times as well as the Ipad. The printer is set up and has access to the wifi. It seems to me that the Ipad and Iphone are not recognizing the connection with the e printer. I was hoping there was some adjustment that could be made to the Ipad and Iphone. I can email to the printer from both gadgets. I will try to recycle the devices again.

I am trying to print a jpg, centered on the page, to epson printer and the printed image is off center, does anyone have a sense about setting to check?

i am trying to print a jpg, centered on the page, to epson printer and the printed image is off center, does anyone have a sense about setting to check?

right click a blank area of the toolbar, click Customize. You'll see the printer icon there. Drag and drop it to where you want.
You can also find this option under View -> Toolbars -> Customize.

When I rip a cd, then use another program, then come back to itunes, the cd stops ripping and the cd doesn't show up in the side bar anymore. What's going on here?

When I rip a cd in itunes, then go to use another program, then come back to itunes, the cd stops ripping and the cd doesn't show up in the side bar anymore. What's going on here? I am running the x64 version of itunes in Windows 7.

Just wanted to say that you're not the only one with the problem: http://discussions.apple.com/thread.jspa?messageID=13009436

HT3500 I have mosx Lion have no driver for my photosmart c4580 printer and the printer test page gives no ip address. How do I get my printer to work?

We bought a new Mac bookpro using the latest version of lion 10.8. We also have a c4580 photosmart printer and have bee unable to find a driver down load for this printer and our Macbook. We have tried to use u tube and other sites including Apple support to try to connect to our printer. We run a printer test page and the ip address comes up "not applicable". Do we need to connect the macbook to the router? What are we doing wrong? HP site will not give us a driver download. I have to buy it. Seems simplar to goand buy a new printer but this one is still good. Can anyone help? We are not as software savy as alot of you out there. Thanks.

Download the HP drivers here:
http://support.apple.com/kb/DL907
Download the Epson drivers here:
http://support.apple.com/kb/DL1398

Iphoto will not print and the print command freezes my computer. Help!

I cannot print from iPhoto. When I give the print command my cursor turns into a pinwheel and freezes my computer.

Apparently there's some preference files other than iPhoto's that may be causing the problem. Here's how to determine if that's the case:
Trouble Shooting Preferences
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks or Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
1 - close all applications.
2 - open your Home/Library folder and Option-drag (copy) the Preferences folder to the Desktop.
3 - select the contents of your Home/Library/Preferences folder and drag them into the Trash bin in the Dock. You will be asked to provide your Admin password.
4 - reboot. Be sure to know your account's username and password as you will be asked to log in with it.
5 - run the application again and determine if the problem(s) is fixed.
6 - If the problem is fixed:
A - open the working Home/Library/Preferences folder.
B - Open the Preferences folder on the Desktop, select all of the contents and drag them into the working Home/Library/Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace or Skip button.
D - reboot.
7 - If the problem is NOT fixed, drag the contents of the Preference folder on the Desktop into the Home/Library/Preference folder and replace the entire contents that were created by clicking on Replace.
8 - reboot and you're back as square one.
Note: keep the Preference folder on the desktop until you're sure all registration info for your apps are working. If not you can copy the required files from the desktop pref folder to the working one.

I select a page for printing and the print page shows only the frame data and this is all that it prints.

when I click on print the page to print shows only the frame and that is all that is printed. Why isn't the page data shown on the print page and also printed?

This is how you do it:
http://i1224.photobucket.com/albums/ee374/Diavonex/c7db8382.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/5e4aadae.jpg

Can I use Airport Express for printing and Ethernet printing at same time?

I've been trying to set up a couple of laser printers that were given to me recently. The printers are Apple LaserWriter 16/600 PS and Samsung CLP-510. The reason I'd like to have both up and running is because the black toner for the Samsung costs twice as much as the toner for the LaserWriter. I have two questions that I am hoping someone will be able to answer.
1) The CLP prints a test page just fine. I was finally able to get the Samsung printing while directly connected to my PowerBook G4 via usb (I had to install a Xerox Phaser 6100 driver to do so!). Today I tried putting the usb into my Airport Express (which I use for my portable internet and airtunes) and now the printer does not respond. When I try to add the CLP as a bonjour printer, I get an error adding the printer and the printer does not respond. Can someone offer some advice as to how and if the CLP may work via the Airport Express?
2) The LaserWriter prints a test page just fine. I purchased a transceiver (albeit not an Apple transceiver - this one says Asante Friendlynet, the guy I bought it from said it would work though). The transceiver is connected to the Ethernet port on the printer - and I have a yellow ethernet cable (?) running from the transceiver to the ethernet port on my computer. I read somewhere on the internet that I need to turn on Appletalk in order to use the printer via ethernet but when I went into my network settings to do that, there was a warning that I could not turn on appletalk for ethernet without forsaking my airport. Can someone offer some advice as to how and if the 16/600 PS may work via ethernet without disrupting my (working) airport express? Also - I did not receive any software or drivers with this printer but I read that I may not need to (they come with Tiger - ?) Is anyone able to confirm this?
Any help would be TOTALLY appreciated!
Leigh-Ann

Hello Kappy! Thank you for taking the time to reply to my question.
I should update you at this point to say that I can add the 16/600 PS printer through a process that I found called 'Direct IP printing over ethernet'. (I think I've done this correctly - but I honestly have no idea about network stuff). Here's what I did:
-went into system prefs and looked at the network settings under built-in ethernet tab. Under TCP-IP I found the IP address of my network host.
-In the Printer Setup Utility I tried to manually add the 16/600 PS printer. In the Printer Browser window, I selected IP Printer.
-Under IP printer, I selected LPD Protocol. I inserted the IP address copied from my network settings (above) in the address bar. In the Queue bar I typed in the name of the printer 'Apple LaserWriter 16/600 PS'.
-Again in the Printer Browser box I gave the printer a name and location. Finally, in the 'print using' box I selected Apple and then chose the model from the drop down list. 'Apple LaserWriter 16/600 PS fax v.2014.016'
-I got a dialogue box that asked about other installable features - clicked ok.
-when I tried to print a Word document, the Apple LaserWriter driver opened up and appeared in my dock and then I got an immediate error saying "network host ---.---.--.--- is busy, down, or unreachable..."
-I tried to repair permissions, but it did not resolve my issue.
-I noticed that even after adding the 16/600, it did not show up as a bonjour printer, but remained visible as a printer in my list (although grayed out).
I did some troubleshooting and the best I could find as a close match for my problem was that perhaps I had entered the name incorrectly in the Queue box...? If anyone knows how to find the appropriate name to insert I would sure appreciate knowing.
Finally - you should probably know that I received this printer from someone else. I guess I'm wondering if I need to be resetting network settings on the printer somehow? The test page lists the following:
Ethernet (Address: 08:00:07:84:78:e9)
EtherTalk: PostScript
NetWare: AutoSelect
TCP/IP: AutoSelect
IP address: 0.0.0.0
And - now finally, to answer your questions (the best I can, that is)
I did connect the yellow network cable directly into my laptop (right side, 4th input, counting away from me). I have a portable internet modem that plugs into my wall (for power) and then has a cable (Ethernet?) that goes into my Airport Express (LAN port?). I have no other router and there are no other inputs or outputs on my modem. My Airport Express has only one input for the modem, one mini input for airtunes, and one usb input (in which I have a cable connecting to my other laser printer (now working wirelessly via Airport Express!!)
Should I have these cables hooked up differently?
What is a Phonenet adaptor? My internet is provided via a cable service (not DSL). It is wireless and portable - I can take it to any major city in Canada and it works as long as it is plugged into a power source and near a window.
I really appreciate any help you can offer. At this point I must have spent the better part of almost two weeks trying to get these older laser printers up and running.
Thank you again.
Leigh-Ann

HT4356 my iPad will not print to my AirPrint printer. The print center shows the printer but it continually says "waiting"

My iPad will not print to my HP AirPrint printer. The print center shows the printer and the print job but the print center continually shows it is "waiting"

This article states that if your printer is not listed you can't airprint from your idevice but I have printed from my Ipad to my HP Officejet Pro 8600 in the past but now, all of sudden, I no longer can't. I'm trying to print from the "note" app but every time I try to print it keeps sending to my printer but never prints. Constantly buffering and sending, that's all it does. My color ink levels are all low but I have plenty of black ink left. EXTREMELY FRUSTRATED WITH APPLE AND HP!!!!

Why do i need to turn off the printer and restart it every so often to get it connected and ready?

E-print works great when it's connected but it keeps disconnecting and I need to re-start the printer in order to print what I've sent it from my cell phone. How can I fix this?

Hello bobdoss63,
In that case I suggest you to print HP Network Configuration Page and make a note of the Printer IP address, Subnet Mask and Default Gateway as printed in the page.
Next open Internet Explorer browser and type the printer IP in the address bar and press Enter key. This will open printer information web page also known as EWS (Embedded Web Server) page. Here click on Network. If the printer is in Wireless, select Wireless and one of the settings displayed talks about Manual IP configuration.
At this setting select Manual IP and enter the Printer IP, Subnet Mask and Default Gateway. Then select Manual DNS and enter the following addresses
8.8.8.8
8.8.4.4
Save the settings and turn OFF and turn ON the printer. Try re-enabling the webservices and check the result,
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

HT1338 I'm trying to print a document fro safari and the print command is at the bottom of the page and not visible. I can't move it up and the print command shortcut doesn't work. How do I print this document.

I'm trying to print a document from safari and the print command is at the bottom of the page and I can't move it up. The print command shortcut doesn't work and I would like to know how I can print this document.

Why do we have to install 2 add ins for something that should be built in? Please add this to the next version or an update to this one even. We should see the full path of a bookmark when we search for it. Show Parent Folder alone isn't enough if you have sub folders, so I installed Go Parent Folder as well in case of sub folders.

HT1338 I'm trying to follow HP's instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can't "add" the printer to the print queue because I don't have a driver and you have to se

I’m trying to follow HP’s instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can’t “add” the printer to the print queue because I don’t have a driver and you have to select a driver before the add button becomes active. Therefore, the Mountain Lion software update doesn’t add driver software for the CP 1215 driver because I was unable to add the printer to the print queue.

This printer doesn't seem to be supported in ML:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=412187#N2043
You could try the 1515 driver or use the Generic PostScript Printer PPD when adding the printer.
Hope this helps.

For 3 years my iMac and miniMac both communicated with a Canon printer and the internet using an Airport Extreme. Last winter, the miniMac lost printing via the Airpor and now can't communicate with the network at all.

For three years my iMac and Mac mini were networked via Airport Extreme with a printer and the internet. More recently, I added an iMac and iPhone. PROBLEMS: A few months ago the Mac mini lost its connection to the printer, and now it cannot locate the network at all.

If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
Use the same SSID and password for both machines. Computers will connect to the strongest signal.

How to report print to the printer immediately and display the popup?

Dear friends,
I am running my report in background and displaying the confirm results on popup window and sending the results to printer,
but now i want to send the results page to printer then want to display the popup.
i have writen my popup perform after printer perform only but its not working...when i am clossing the popup or came back from that popup then only the results sending to printer...
How to report print to the printer immediately and display the popup?
Thanks in advance
Sridhar

Hi Sudheer,
I am using my print parameters like this :
    NEW-PAGE PRINT ON DESTINATION ws_printer
                         IMMEDIATELY 'X'
                         KEEP IN SPOOL 'X'
                         NEW LIST IDENTIFICATION 'X'
                         SAP COVER PAGE 'X'
                         ARCHIVE MODE '1'
                         LINE-COUNT 64
                         LINE-SIZE 170
                         NEW-SECTION
                         NO DIALOG.
Then also its not printing immediatly.
here one thing for displaying the popup i am using submit report(calling another report for popup purpose)
before trigering the submit programe i need to print this.
Thanks
Sridhar.

I am using OS X and am trying to set up a HP ENVY 5660 e printer and the drivers are not listed. I read somewhere not to use the install disk. What do I do?

I am using OS X and am trying to set up a HP ENVY 5660 e printer and the drivers are not listed. I read somewhere not to use the install disk. What do I do?

Your suggestion was a good one and what I found was that to use this and any other printer I looked at is that I need to update the operating system to a later version. I have been reluctant in the past to do this after reading update horror stories and since this computer does what I need and very well. Was glad I moved over from windows and this is the first problem I have had. Thanks for your help and any other suggestions you may have.

I need to print and the printer doesn't show

Similar Messages

Maybe you are looking for