I need to print Insurance claim information on 1500CS claim forms

I have a HP Photosmark 7510 printer, Windows 7 64-bit operating system. I need to print claim information from
my computer on a 1500CS incurance claim form. Is there any way this can be done? How do I adjust the margins,
test, ect. to fill in the boxes on the form neatly?

Hi,
As mentioned above, some organisations/organizations allow user to fill out the forms very easy but many others do not have this facility. In this case, I believe the form won't let you "edit" it, therefore you need to do it by hand, using a typewriter or using a PDF editor. There is a very expensive one and there are some alternatives. Please check this (ignore the expensive one):
http://www.labnol.org/software/edit-pdf-files/10870/
My suggestion: just one form, using a pen may be a lot quicker.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

HP LaserJet Professional P1102w won't print Web Services Information Sheet

Hi there.
I've spent the last frustrating three hours trying to get the Web Services Information sheet to print on this printer. I need this sheet in order to register for ePrint.
I connect fine wirelessly on my computer to the printer. I have updated the firmware. Twice, to be sure.
I have gone to HP Web Services and clicked Enable
The message I then get is:
"A Web Services information sheet will be printed. Review the sheet for important information."
However, nothing prints.
I have tried this process with the computer connected wirelessly through my network. I have tried it with the computer connected to the printer via USB. I have printed other things on the computer this way.
I have tried rebooting the network and the printer and then reconnecting
I have tried these steps:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/eprint-printer-code-...
(I changed the preferred DNS from 10.0.1.11 and the alternate DNS from 8.8.4.4. to the values suggested)
Afterwards, there was no change. My printer continued to print in every way possible. However, it will not print the Web Services Information Sheet.
I'm very keen on getting my hands on this email so that I can register for ePrint. Can anybody help me? I would be hugely grateful.

Sorry to hear you were unable to setup the wireless again on the p1102w.
I have provided some steps in resetting up the p1102w on wireless network if you decide
to do it again in the future.
Reset the printer back to factory settings.
(turn printer off then hold down the x and the wireless button while turning on the printer until the lights start blinking then release the buttons.
Disconnect the usb cable from the printer.
Disconnect the routers power cable for 10 seconds and then reconnect it again.
Uninstall the p1102w from the computer.
(open cd and select uninstall or go to uninstall a program from the control panel.)
Run the cd again or download depending what operating system you are running.
Connect the usb cable when prompted to setup the wireless again.
Enter passwords for the network when prompted.
Disconnect the usb cable when prompted.
Should be able to print out the test page now.
Then you should be able to get the web services information sheet to print but will need to print out a self test on the printer to get the new ip address for the printer.
If further issues you can contact HP technical support at 1-800-474-6836.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I need to able to print a pdf that is locked. It has fields to fill in but then to save a copy I need to "print" to PDF not save as a pdf because that is not an option with the document. Is there a way to do this?

The PDF has fields to fill in but then to save a copy I need to "print" to PDF not save as a pdf because that is not an option with the document. Is there a way to do this? HELP!

Sorry I thought was just a one off, it would be no use for large volumes.
Do you not have this avaiable in the print menu in Preview with these documents?
I have also found a link on the Adobe web site that discusses that this facilty is enabled by the creater of the PDF.
http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd61510979419 5ff-7e0d.w.html
If you do a web search there are various claims on how to save a protected PDF, I have'nt a way to test the proceedures. I would want a copy of any forms that I sent off, not sure why they protect them in this way, there must be a reason.

I need to print my stored userid's & passwords.

As stated above, I need to print my stored UserID's and Passwords so I can input them later in a new computer. I am using Firefox 3.6.10

It is easier to make a backup copy of the files that store the password and copy them to the profile folder on the new computer.
To backup or restore passwords in Firefox 3.5 and later you need two files: [http://kb.mozillazine.org/key3.db key3.db] and signons.sqlite.
* http://kb.mozillazine.org/Password_Manager#Backing_up_and_restoring_passwords
* http://kb.mozillazine.org/Password_Manager#Printing_passwords
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I need to print an envelope (regualr No. 10) using Open Office Writer and HP D7160

I need to print an envelope (regualr No. 10) using Open Office Writer and HP D7160. Unbeleivably there's NO information about doing this in the hard copy user manual, nor have I been able to find anything online yet.

I need to print an envelope (regualr No. 10) using Open Office Writer and HP D7160. Unbeleivably there's NO information about doing this in the hard copy user manual, nor have I been able to find anything online yet.

Need a printer for my old iBook (old apps won't translate) but also for a MacBook Pro, 10.6.8! Anything compatible?

Need a printer for my old iBook (old apps won't translate) but also for a MacBook Pro, 10.6.8! Anything compatible?

If I understand this correctly, you wish to print from the iBook under Mac OS 9.2.x and from the MacBook Pro under Mac OS X 10.6.8 (no AppleTalk support in the latter).
What type of printer did you have in mind? Does it have to be colour? Otherwise, a monochrome laser printer may be the best choice (high print quality and a low per page cost). A networkable PostScript printer may be the most compatible. Additional information would make it easier for someone here to suggest a solution.
If you would be willing to accept some extra work and certain limitations, another way could possibly be to "print" to a PDF file on the iBook via a printer driver called PrintToPDF, and then transfer this file to the MacBook Pro and carry out the "real" printing there.
http://www.jwwalker.com/pages/pdf.html
Jan

I need to print my Invoice.

I need to print my Invoice or receipt.

Hi JGabriel Martinez,
Please see this document: Manage your membership and payments | Creative Cloud.
You'll find the information that you need in the Payment & Credit Card sections.
Best,
Sara

I need to print off messages to and from my cell

i need to print off messages to and from my cell

You report your problem as using Acrobat on a Mac. You've posted in the Reader forum for iOS.
I've moved your question to the Creating, Editing and Exporting PDF forum which seems more appropriate.
You'll need to provide more information for us to be able to help you.

Hyperion Anaylzer - how to Print report with information in pages?

Hi, I use Hyperion Analyzer Version: 6.1.1.00206 (from Help | About menu). I created report with pages (on Navigate button selected the Pages). In pages are months (January, February, March, etc). Now I would like to print current report. So I did: 1. click on arrow beside Print button 2. Print Current Report windows is displayed. I selected default options and press OK button. Report is printed, but there is no page information printed out. So on paper there is report without months (January, February, March, etc). How to print report with information in pages? Thanks, Grofaty

Jia Shun,
I had the same issue for printing A/R Invoices - I created a Crystal Report based on a SQL View, works fine with A/R Invoice document, but the Draft Invoice printing has 3 pages: 1st page blank, 2nd page with watermark "DRAFT", 3rd page my Crystal Report layout without any data. When printing normally it is only 1 page.
Here is what I did as a work around:
Create two SQL Views, one select from OINV (joining INV1 and other tables needed), the other select from ODRF (joining DRF1 and other tables needed), for the draft printing.
Create two identicle Crystal Reports, only difference are: datasource location (from different views), the "draft" crystal report has a watermark section.
Go to Administration>System Initialization>Print Preferences and uncheck "Print draft watermark..."
Import both crystal reports. Invoice can be printed normally. But the Draft Invoice has more steps: Open Draft document report, change settings so it shows the DocEntry in the Draft Table. Select and open the desired document, hit Print Preview, and enter the DocEntry, it displays the layout with data and "DRAFT" watermark.
This is a workaround. I don't like it because it is not scalable - too much workload if you want to print 100 invoices.
Hopefully someone will provide a better solution.
regards,
G

Need to print mailer info always on even numbered page

Post Author: LaurenP
CA Forum: General
Good morning,I'm currently using Crystal Reports 8.5 (I thought I was on 9.0) and am trying to get a report to always print the mailing information on an even numbered page.Here is the deal. The report for the most part will be 2 pages, the first containing the details and some summary information and the second containing the mailing information. The customer that is using the report prints it out on special paper, so that the mailing information needs to print on even numbered pages.The report is set up with several groups, one being on the person's address, which is where I have put the mailing information. I also added the mailing information to one of the details sections (one that is before where the actual details print) and is suppressed using the following formula: PageNumber Mod 2 <> 0. I have also added a formula to the New Page After: PageNumber Mod 2 = 0. This seems to always work when the report goes to page 2 while printing out the details. My problem now, which would be the case most of the time when this situation occurs, is when the report goes to page 2 while printing any of the 3 group footers that have summary information in them. I tried using the same logic as with the details and it is hit and miss on whether or not it will work. I have added the mailer information in a footer section above the footer and added the same suppression and new page after logic and sometimes it will work and sometimes it won't. When it doesn't work, the mailer does not print and the group footer prints on page 2.Does any one have any ideas?Thanks in advance,Lauren ETA: I have tried to debug it and this is what I found. When I take off the suppression formula so that the mailer always prints and add a pagenumber field to the group footer it displays 2.

Post Author: V361
CA Forum: General
You could try adding
WhilePrintingRecords;
in front of the PageNumber Mod 2 .... Statements
This may not work in 8.5, but it is worth a shot.
If that doesn't work, you may need to consider a subreport.

Need to print a letter to bank after every payment run

HI Gurus,
i have a weird requirement from businees, i need to print a letter after every payment run for specific pyament mehod through F110. the config for this payment method in FBZP maintained as
Paymnet mehod for : outgoing payment
Paymnet method classification : Bank transfer
this is letter will contain the most of the bank details in vendor master data (like bank account number, bank name, address,......e.t.c)
Could you please help me in finding if there is any standard form has this details and driver program for this (i mean RFFO*).
Thanks in Advance.
Preethi

See Chapter 11 of Oracle Business Intelligence Server Administration Guide (Version 10.1.3.2 December 2006).
Oracle BI Administrators can configure the Oracle BI Server to maintain a local, disk-based cache of
query result sets (query cache). The query cache allows the Oracle BI Server to satisfy many
subsequent query requests without having to access back-end databases (such as Oracle or DB2).
This reduction in communication costs can dramatically decrease query response time.
As updates occur on the back-end databases, the query cache entries can become stale. Therefore,
Oracle BI Administrators need to periodically remove entries from the query cache using one of the
following methods:
■ Manually. In the Administration Tool, in the Manage menu, select Cache to open the Cache
Manager. Cache Manager provides the maximum flexibility in choosing which cache entries to
purge and when to purge them, but it requires direct human involvement. For more information,
refer to “Using the Cache Manager” on page 255.
■ Automatically. In the Administration Tool, you can disable cache for the system, set caching
attributes for a specific physical table, and use Oracle BI event tables to purge cache
automatically. For additional information about managing cache, refer to “Monitoring and
Managing the Cache” on page 234.
■ Programatically. The Oracle BI Server provides ODBC-extension functions for purging cache
entries programmatically. These functions give you the choice and the timing flexibility of Cache
Manager with the automation of event tables. You can write your own scripts to call these
functions at times that fit your needs. For more information, refer to “Purging and Maintaining
Cache Using ODBC Procedures” on page 235.

Take laptop & printer to client, need to print from client computer using my printer

I nstalled my HP Laserjet 1102w to my laptop with my ips address to work wireless.
I take my laptop & printer to client's location and need to print from their computers using my HP Laserjet 1102w.
I network in to their ips address using my laptop to.
Could not install my HP Laserjet 1102w on their computer & print from their computer.
How do i print from my HP Laserjet 1102w using their computers at their location?
Thanks!

Hi debitacct ,
Thanks for clarifying that information.
You would have to restore the printer's defaults and reset up the printer on their network at the new location every time, to be able to print from the clients computer and you would have to connect to their network on your computer and add the printer back in again with the new IPv4 address.
Another way you could do this is through a USB connection or use the Wireless Direct.
You would have to enable the Wireless Direct on the printer through the printer's Embedded Web Server if you didn't select this feature during the installation. This will allow both computers to connect directly to the printer and print, but keep in mind you won't have internet access at the same time. So you can print when connected to the printer's network or connect back to the main network again to access the internet.
Here are the steps for enabling the Wireless Direct through the printer's Embedded Web Server if you decide to go this route. Print a configuration page to get the printer's IPv4 address. Printing a Configuration Page.
Type the IP address into your web browser's address bar. (Internet Explorer)
Then click on the Networking tab, select Wireless Direct Setup on the left side and check the Enable wireless direct printing.
I hope I explained that alright for you. The USB connection would most likely be the easiest way to go.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

PDF document not full page but need to print it as a full page

Hi,
I have a pdf document which is 15 cm by 8 cm and need to print it as a full page without the white border making up the full page. How can I do this?
The document was created in publisher and saved as a pdf.
I am reading the document from Adobe Reader on a Windows XP machine.
Thank you for any help any one can give.

Do you have a printer that can print pages without a white border?
Very few printers can do this.
Aandi Inston

This is about iPhoto: I need to print the FULL IMAGE as shown on the screen: the image is SQUARE (equal on four sides). iPhoto keeps cropping it into a rectangle - THIS IS NOT ACCEPTABLE! How do I get what I see on the screen in print form???

I need to print the FULL image as shown on the screen - the image is SQUARE (equal on all four sides). iPhoto keeps cropping it into a rectangle - this is not acceptable! How do I get what I see on the screen into print form?

Like Terence explained:
OT

Need to print a report

Hello guys,
I have button in my form, which displays
a report, I need to print the report,
once the the button the pressed.
Are there any ready made functions !!!
A.Kishore
null

Kishore,
Do you want the report to show up and then
the browser print window to show up?
If so, then in the unstructured template, call the window.print() method using the onLoad event for the body tag. When the report loads in the browser, you will get the browser print window (in Netscape). In IE, the print starts automatically.

I need to print Insurance claim information on 1500CS claim forms

Similar Messages

Maybe you are looking for