I need to re install my printer to my laptop, but lost the disc for MX410.

I need to re install my printer to my laptop, but lost the disc for MX410.

Hi morineb,
The latest drivers for the printer can be downloaded from the Canon USA website.  Please click here to go to the Drivers and Software page for the PIXMA MX410.  Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED DOWNLOADS" section and click the MP drivers file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once you have downloaded the MP drivers file, please double-click on it and follow the prompts to reinstall the printer on your computer.
Hope this helps!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • I need to download photoshop elements on my new laptop but lost the installation disc...

    I have the serial number and solution disk and everything it came with BUT the installation disc. How do I download it on my new laptop without installation disk?

    it is PSE 9
    Krista Pandiscio
    Date: Wed, 22 Jan 2014 10:43:31 -0800
    From: [email protected]
    To: [email protected]
    Subject: I need to download photoshop elements on my new laptop but lost the installation disc...
        Re: I need to download photoshop elements on my new laptop but lost the installation disc...
        created by Barbara B. in Photoshop Elements - View the full discussion
    It would help if you would tell us which version. If it's PSE 12, just install the trial and enter your serial number into that.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6040988#6040988
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6040988#6040988
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6040988#6040988. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop Elements at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • How do i install classic on my macbook if i lost the disk for it?

    how do i install classic on my macbook if i lost the disk for it?

    define "classic".

  • I have misplaced or lost the discs that came with my CanonMP490. How do I set up the printer to use

    Help I have lost the discs for my Canon MP490 printer and cannot boot the system up onto my new laptop.  What can I do?

    there are links to the windows software on this page...
    http://www.apple.com/support/downloads/airport42forwindows.html
    depending on the age/status of your pc, you may also need to install windows updates

  • I need to connect my wireless printer (HP LaserJet CP1025nw color) to the internet.

    I need to connect my wireless printer (HP LaserJet CP1025nw color) to the internet.    I recently have changed my name and password of my modem.  Since the change I have lost connectivity between my computer and my printer.  What do I need to do to regain connectivity?  I am using Windows 7.
    Trydell

    I think you mean your password on your router right?  Changed your SSID and/or password? 
    Try here.
    http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc.  It started to install the first time and said it needed to restart to finish, restarted but ejected the disc.  It ejects every time now.

    I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc.  It started to install the first time and said it needed to restart to finish, restarted but ejected the disc.  It ejects every time now.  I've also installed the 10.5.8 combo update but that didn't help it.  I've tried restarting the macbook with the disc in, holding c, all that.  Why won't this work?!

    Zap the PRAM and Reset the SMC, then try again.

  • I've just installed Mountain Lion 10.8.5, but now the CS programs are giving me a licensing error.

    I've just installed Mountain Lion 10.8.5, but now the CS4 and CS5 programs are giving me a licensing error. I've restarted. Uninstalled, reinstalled. And still, they don't work. I need to stay at 10.8.5 and not go to Maverick, per a client's needs at this time. Help!

    I've also tried this...that I found in another discussion...also did not work.
    Solution 1: Delete the FlexNet Publisher preferences folder
    -  Quit all Adobe applications.
    -  On your startup disk, locate and delete the following folder:
    [hard drive]/Library/Preferences/FlexNet Publisher/ 

  • My printer receives and prints my e mail but not the attachments how do I rectify this?

    My printer receives and prints my e mail but not the attachments. How do I rectify this?

    Hi robgpearce,
    Your issue could be related to the file type or a setting with the file. In the help section of ePrintCenter.com, it goes into details on how the HP ePrint service does not support printing webpages via email at this time, HP is currently developing dedicated solutions to support webpage printing from mobile devices. Image files (like jpeg, bmp, tiff, etc) need to be at least 100DPI in order to print via ePrint. PGP encryption, digitally signed documents, macro-enabled spreadsheets and password-protected documents are not supported by ePrint at this time and will not print.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • I had installed adobe Cs5  on previous laptops but and those laptops are damaged now I want to  use the same serial on another laptop what should I do?

    I had installed adobe Cs5  on previous laptops but and those laptops are damaged now I want to  use the same serial on another laptop what should I do?

    Well, what is your problem?
    If you are entering your serial number and being told you have used up your activations, you will need to contact Adobe to have your activation count reset
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

    Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
    <E-mail Edited by Host>

    It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
    I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
    So what to do, what to do.
    Well there is hope for you as long as the drive wasn't Filevaulted.
    I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
    When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
    Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
    The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
    It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
    So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
    The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
    So what you will have to do is this:
    Create a data recovery/undelete external boot drive
    or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

  • I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

    I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

    Hi vindog60,
    Thank you for using Apple Support Communities.
    To troubleshoot this issue where you get an installation error with iTunes on your Windows PC, please follow the steps in the article linked to below.
    Issues installing iTunes for Windows - Apple Support
    Cheers,
    Alex H.

  • Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

    Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

    What is the size of your hard disk?  PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine.  Just a thought here.

  • When i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!

    when i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!

    Try:
    iOS: If you can't back up or restore from a backup in iTunes

  • HT3964 Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

    Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

    Have you tried one of those CD cleaning Discs yet?
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.

  • All my pdf are printing mirror image since i started the subscription for adobe

    all my pdf are printing mirror image since i started the subscription for adobe

    Hi pintu777,
    I see that you just got an ExportPDF subscription. That shouldn't have any affect on the way that your PDF files are printing. Has anything else changed on your system? What are you printing to and from (Reader or Acrobat)? Do other types of files print mirrored as well?
    I look forward to  hearing back from you with a few more details. We'll get this sorted out.
    Best,
    Sara

Maybe you are looking for

  • PowerBook G4 Install Issue - Still waiting for root device

    Hello Everyone and thank you for reading this post. I have a last generation PowerBook G4 which I wanted to give to a family member since I've upgraded to a newer MacBook Pro. I started by wiping the hard drive on the PB (in Target Disk Mode) using t

  • Glow filters and tween class does not work!!

    hi!!!! this is my problem... I have inserted on stage through attachmovie a mc and copied 6 times through the cycle for. . now through the class filter I have assigned for everyone the effect always through the cilo for, but I do not succeed to assig

  • Output in single window

    Hi Gurus, In a WD ABAP when user interacts with the input in URL the output to be displayed in the same window. This is possible in the case how the coding must be?

  • HT201317 Is there a way to tell when a photo in your photo stream was taken?

    Is there a way to tell when a photo was added to photo stream. How do photos appear on photo stream? Are they downloaded from my iPhone when I save a picture that was texted to me? Do they then go right into my photo stream?

  • Active Protection System Sensor Location

    Hello all, I am looking to upgrade the hard drive in my T61p, however my only reservation is the active protection system. I would like to keep this feature, and was unsure if the sensor for this was on the Lenovo hard drive itself or if it was elsew