I need to re set my billing system password

Please someone from the customer service department get in touch with me.

You would get this done sooner if you contact CS via phone or go into a store.

Similar Messages

Virus contamination of my PC, I need to re-set up PC system.

Because of the virus contamination of my PC, I need to re-set up PC system. So how can I re-set up my photoshop software after PC system re-setting up?

Download CS6 products
Mylenium

Cannot find Billing System Password to register for My Verizon account

I'm trying to register for a My Verizon account with my new business phone line, in hopes that I can see when my next bill will be due, or if it has already been sent, but I've not yet received it.
When I click to register for a My Verizon account, I am asked for my billing system password. I have never heard of this, though a search through these forums suggested that it might be the last four digits of my SSN. I tried inputting the last four digits of my SSN, the last four digits of my Tax ID number (as this is a business account), and even my Voicemail password. Nothing has been successful, and I am now alerted by the registration page that my account has been locked and I should contact Customer Service at 1-800-922-0204 to access my online account. Ironically, when I called this number, a voice-automated answering service asked for my billing system password again. After repeating the same entry attempts as I tried online (knowing they wouldn't work, but not having any other ideas), I was finally prompted that if I'd forgotten my billing system password, I should press 0 to speak with a representative. Pressing 0 brought forth another automated message, simply stating something along the lines of "Thank you for calling Verizon Wireless," and I was then promptly disconnected without the phone even ringing for a representative.
How do I go about finding my billing system password so that I can create a My Verizon account for this phone line?

If this is a business line (part of a business account) you may have to get the billing pw from your employer. The billing pw is normally the last 4 of the account owner's SSN, which would be your employer, or the company's EIN #. Depending on how the account is set up, you may not be able to have an account for your number, but I'm not sure on that point.

Billing system password?

Nevermind how ridiculous it is just to get a new phone if you aren't an authorized user or if you don't have your account password (even though they have your name, ID, and phone number), but now I'm trying to activate said phone and it requires my billing status password, which I used correctly to procure a replacement phone when mine broke. Now when I enter it when prompted it's incorrect, both online and when I use the automated activation service on the phone. Why would it be wrong when it was right two days ago and how do I bypass Verizon's sadistic password policy to activate my new phone? I'd REALLY prefer not to go to the store because I've dealt with them twice already in one day and they are no absolutely no use.
FYI, my original phone's charging port was broken and wouldn't charge but has now suddenly revived itself. Maybe there wasn't enough charge in the battery to turn it on at the onset of charging? But the guy at the store determined that it was not the battery or charger and therefore had to be the charge port. I really would just rather send the new phone back and keep the old one as mine has no SIM card anyway and I don't want to go to the store and have them transfer all my contacts over to the new phone, and I don't want to do it manually either. It sure would save a lot more hassle than trying to get my billing system password resolved.

Hello unicornhearts,
I'm so glad to see that your original phone is working. Thank you for sharing this discovery. I know how much of a hassle it can be to switch phones. The last thing we want is a simple security measure to be a frustrating process for you. If you haven't already activated your original device yet then please allow me to be the one to assist in getting this taken care of. May I ask what make and model device do you have? If it's a 4G device then the equipment can be activated by doing a super easy device change on My Verizon and a sim card transfer. If it is a 3G device then simply send me a private message with your full name, mobile number, and a brief summary of the issue. I can get this taken care of for you. I'm looking forward to your next reply.
Thank you...
ArnettH_VZW
VZWSupport
Follow us on Twitter @VZWSupport

Why there is an error in the billing system even though I have a new charged card?

I have an Apple account which I need to fill in the billing system via Visa and which I did, but there happend to be a problem where I couldn't update, download or even purchase an app. I assumed there wasn't enough cridet in my internet card so I got a new card with money in it, but it gave me an error saying "There is a billing problem with a previous purchase.". Even though I got a new card it still shows me the same message and when incerting the new card number it tells me "invalid security code". I have contacted the card company to know if the problem is from them but I have updated my account and got this new card but still having same errors. could you help me look what's the problem with the billing system?

Hi R_Loading,
You will need to contact iTunes Support:
https://getsupport.apple.com/GetproductgroupList.action
Or by email: https://ssl.apple.com/emea/support/itunes/contact.html
Cheers,
GB

I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. So, what are the parameters that I need to set in CRM system so that my quotation gets replicated?

Dear Experts,
I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. What are the parameters that I need to set in CRM system so that my quotation gets replicated without any error?
Please help me in this regard. An early and in detail step by step guidance is highly appreciated.
Thanks,
SMTP

It may be best to recreate the folder and the smart playlists from scratch.
tt2

Wls10.3.2: Why do we need to explicitly set -Duser.timezone

Hi All,
We are installed FMW 11g PS1 Weblogic 10.3.2 &Oracle Fusion Applicaton Runtime 11g on Oracle Linux 5.7 VM (running on Oracle Virutal Box / Host-only Network adapter) and created new weblogic domain using EM & JRF product templates and choose default options. (except choosing 'Production Mode')
While deploying our application we are getting "Caused By: java.sql.SQLDataException: ORA-01882: timezone region not found" while performing data base operations (retrieve date from Oracle Database 11g R2 using eclipse link)
Note:- DB schema have column with timezone set.
So, Issue got resolve after updating setDomainEnv.sh file with "-Duser.timezone='-05:00'" (CDT) for EXTRA_JAVA_PROPERTIES.
In general, we didn't the update this properties for our systems.
Please let me know what want wrong with my setup (Linux installation - date & time settings/ Weblogic /Domain creation/Database time zone settings)?
Thanks,
Suresh

Unfortunately, there are many ways how various OSes setup a configuration to indicate what timezone it is using. The JRE assumes a certain way of how this is done and on many systems it is able to get the necessary info it needs to determine what the timezone is, but of course, it also gets it wrong sometimes, or in your case, it did not find what it was expecting.
To preempt your next question, what needs to be set? Well, I wish I knew the exact answer. I have several Solaris, Linux, Windows, etc.. systems, on most of them java is able to get the right timezone, but on some it is getting the wrong timezone, but as far as I can tell the timezone configuration on the ones that are wrong look just like the ones that are correct.

Setting up Billing Block for SALE ORDER during Invoice cancellation

Hi,
I have a requirement where in i need to set the billing block(VBAK-FAKSK) while saving Invoice cancellation document. Please suggest some user exit or BADI during Invoice save so that i can set the billing block in sale order header data.
Thanks in Advance,
Raghav
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Jan 12, 2011 2:59 PM

Hi,
You can try TCode V.00
This transaction when executed will give you the list of all the sales documents blocked for delivery per sales organization. There are various other criteria which might be useful. This transaction will allow you to edit each sales document.
If this is not the one that you want, then perhaps you might have to develop one.
Thanks
Mukund S

TAX_UNIT_ID needs to be set

Hi Friends,
I have the following problem while running the QuickPay with Transport Allowance that was defined using the Element Design Wizard.
UDF Error in formula TRANSPORT_ALLOWANCE_FIXED_CALC at line 38: Database item requires context TAX_UNIT_ID to be set.
Following is the procedure i followed to define the TA
1. Create Transport Allowance Element using the EDW
2. Select the Calculation of Fixed Allowance.
3. The system generates the predefined formula with the prefix of our element name (In my case TRANSPORT_ALLOWANCE_FIXED_CALC )
4. Attach the element to the employee and enter the Allowance Amount.
5. Run the Quick Pay Run
6. System generates the above mentioned error.
I have defined the GRE/Legal Entity and assigned it to the employee. What TAX_UNIT_ID needs to be set and how can it be set?
Pls let me know the solution for this problem.
Regards,
Rajani

Please check formula results rule screen and verify the formula results. Also verify FF any custom functions are being invoked. If functions are there then verify function parameters, context usage etc. We dont know exact problem until unless you explain the problem in detail.
Thanks!!

Airport Extreme needs to be set-up in "Bridge mode" ??

I am trying to set-up a new intel iMac to a dsl service for my elderly uncle. The dsl people said that their system was compatable with OS 10.4.7 (which is installed) but that the Airport Extreme modem will need to be set-up in "bridge-mode." Can I do that? Where can I find instructions or help with that? When I queried "bridge mode" on this site I get lots of stuff with acronyms I don't understand and stuff about routers and wireless bridges and other stuff I don't understand... I really need help!
Flat-panel iMac, G4 tower Mac OS X (10.4) Setting up intel iMac
Flat-panel iMac, G4 tower Mac OS X (10.4)

Hi Buzz0432,
I think, "yes" - and i think i saw it in the booklet which you get with the AE. However, i'm slightly unsure about this at this instant since i'm not at home where my mac-stuff is.
i'll check on it and will report back lateron...
thomas

I need to change countries but the system won't allow because of an outstanding 7 cents credit balance. What do I need to do?

I need to change countries but the system won't allow because of an outstanding 7 cents credit balance. What do I need to do?

You can try contacting iTunes Support and ask them if they can remove the balance from your account so that you can change countries : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Set sharing on system to read only now computer wlll not boot up

set sharing on system to read only now computer wlll not boot up

Hello skiboat2,
Because the permissions have been changed, you will need to put them back to what they were before. One of the ways to do that is to reinstall your OS X to make sure that everything permission wise gets put back to what it needs to be to work properly. Based of to the operating system that you say you have, I have provided the steps for reinstalling Snow Leopard. When doing this, it does not overwrite your personal data; it only touches the operating system.
Mac OS X 10.6: Reinstalling Mac OS X
http://support.apple.com/kb/PH6606
Regards,
-Norm G.

How do I set up my system so that I can program in C

How do I set up my system so that I can program in C,C ? Without using Xcode. Just want to write simple "hello, world" stuff. So far, my Mac seem oblivious to my efforts even though it seems that all the files are there.
At first, it could not find gcc. Then I added /Developer/usr/bin to the path and it seemed to find gcc.
Then it didn't find stdio.h. I added /Developer/SDKs/MacOSX10.6.sdk/usr/include/ to the path but it still doesn't find stdio.h
There must be a standard C setup that my Mac is not conformaing to. How can I get set up like a regular Unix system and do C programming like I used to?
Thanks,
JfromG

None of the responses/experiences seems to apply to me. Let me ask the question this way, because it's partly for my education and also I'd like to program in C. Let's say I have a Unix box and I want to program in C. What files need to be where in what directories? And why wouldn't that work on a Mac? My impression is that the Mac OS X 10.8 contains all I need, but it doesn't work. At least I don't think it does. I may be out in left field here. But surely, being a Unix box, I can get this machine to compile C code in something like the usual fashion. I don't need editors or development environments beyond the basic stuff - unless your telling me maybe I do! Anyway, just wondering what files need to go where in order to compile C programs. Thanks for you forbearance. I appreciate it.
JohnfromG

Set up of system for acquiring/processing images from digital camera

Hi all,
I am new to LabVIEW and I need to choose and install a system camera+software able to acquire and process images. I would like to achieve this as painlessly as possible, by choosing the appropriate equipment. I was thinking of buying an industrian camera with GigE interface amongst the list of NI supported cameras.
Once I have that, what software do I need in order to acquire and process images with LabVIEW? Do I need NI-IMAQdx and If I already have NI-IMAQ, do I need to purchase a license for NI-IMAQdx?
What steps are required to install and configure the system? If anyone can give suggestions on how to implement this systemit would be greatly appreciated.
Thank you!

As Paul suggested the software you need will be the NI Vision Acquisition Software, NI-IMAQ alone will not be sufficient.
Take a look at this tutorial, part one gives a nice bit of background and part two gives you specifics on how to set things up.
Acquiring form GigE Vision Cameras with Vision Acquisition Software - Part I
Acquiring form GigE Vision Cameras with Vision Acquisition Software - Part II
If you need any further help please do not hesitate to call our pre-sales engineers on 01635 523545.
Regards
Rich
NI | UK

Display the current mute setting in the system tray!

display the current mute setting in the system tray! I hope the developers will fix this issue. THis is only available in jailbroken iphones now,
I know i could use the switch on the side, but most of the time I'm looking on the screen on my iPhone not on the side. The problem is, that a miss incoming calls

Right, but the original question was not, "do you think a mute status indicator on the screen would be useful". The question was whether there would be some way to implement one.
In any case, what you seem to be overlooking is that there would be a lot of people who MIGHT need to be reminded of the mute status, PASSIVELY. Its a different cognitive operation, where the device takes the lead and reminds ME of its status, on-screen, (just as I look at it for other status indications, such as new email in inbox).. without me having to remember to think of the mute status question unprompted. I find it totally illogical that Apple left this out. It could be in the bar at the top with the other status indicators SO EASILY.
Message was edited by: Warner62

I need to re set my billing system password

Similar Messages

Maybe you are looking for