I need to reactivate ACROBAT PRO on new hard drive

I've read all the similar questions and responses from users and ADOBE web responders and determined the agrivating circular nature of the adobe's direction. Why is this so hard and why is ADOBE so unhelpful. This should be so easy. Why agrivate customers and owners of these products ?
ADOBE, please just provide the contact infomration in your resposne to resolve the issue. Please do not direct me into the infernal loop.
Thanks

OK today, five days after this post;
Lot's of perseverance which included some pretty frustrating wait times and disconnects on the 1800 833-6687 support number over the last couple of days. Today I finally got to speak with an Indian Tech gentleman. He spent 20 minutes on the line with me and was able to reset my activation for both my ADOBE products (PSE 9 and ACROBAT Pro 9). Fantastic help and so cordial and respectful.
Thanks ADOBE. You could make this easier for customers and I filled out my tech experience feedback survey to let you know that. But your Tech was great !
CASE CLOSED !

Similar Messages

Need to transfer Acrobat Pro to new computer, old computer crashed so I can't disable/uninstall. What do I do?

Need to transfer Acrobat Pro to new computer, old computer crashed so I can't disable/uninstall. What do I do?

Install it on the new machine, if you have run out of Activations then you will probably need to contact Adobe and explain what happened as far as the old computer crash and burning.

Old computer has died, need to install acrobat pro onto new computer

hi all, have a new computer ans need to install acrobat pro onto new one

Hi Clifford,
Kindly try the below mentoined link.
Acrobat
XI, X | 9, 8 | 7
If you have Creative Cloud version.
Creative Cloud Help | Download, install, update, or uninstall apps
Thanks,
Atul Saini

I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.

What do I need to do after installing a new hard drive?

I had a 13" Non-retina MacBook Pro from mid-2012 and I bought it standard, but I upgraded my RAM from 4GB to 8GB, but also while on this website that I bought the RAM modules from, I noticed they sell Solid State Drives and I would have gotten one, but I wanted to upgrade it later on as I didn't have $500 for the 512GB flash drive for it. I need something with storage and 500GB is plenty, but I found a 960GB SSD for $500 on this website. Its a very good website for upgrades for all computers. So my question is, when I install this new hard drive, can I just hold Command+ R to install Mac OS X or do I need to go through a special process to get OS X on the new hard drive? I have an Apple Time Capsule so I have my data backed up and I'll just restore it from a backup. If I need a special cable to boot OS X to the new drive, then so be it.

https://discussions.apple.com/thread/5210788?tstart=0
At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks.

MacBook Pro 2009 new hard drive install results in very slow function and freezing

I just wanted to post my resolution to a problem that I had trouble finding an answer to on these forums.
Short version:
I replaced the hard drive in my 2009 MacBook Pro because the computer froze and upon reboot the Disk Utility said it was corrupted, but with the new hard drive the computer ran very slowly and often showed the spinning rainbow wheel. I replaced the SATA cable that connects the hard drive to the motherboard and it works perfectly once again.
Long version:
Recently my MacBook Pro (2009 running Snow Leopard) froze up and I performed a hard reset by holding down the power button. When I turned the computer back on it would not boot OS so I ran disk utility from the Snow Leopard install DVD. The test said the hard drive was corrupted, and since the computer is way past warranty I decided to change the drive out myself. I bought a 500GB Seagate Momentus 5400 Drive from Amazon, opened the computer and replaced the existing hard drive with the new one. When I first booted from the OS install DVD, my computer was not recognizing that any hard drive was present. I read somewhere on these forums that sometimes the formatting on new Seagate drives can't be read by MacBooks and they need to be reformatted using another computer, but I tried simply taking the hard drive out and putting it back in a couple of times thinking maybe I had just not plugged it in correctly. After the 4th attempt the hard drive magically showed up, and I was able to reformat the drive and install OS and even Windows XP on bootcamp.
Everything seemed to be okay but applications were running slowly considering this was a fresh drive and OS install. Over time, the computer started to hang more and more. In OS I would get the spinning rainbow wheel even when doing something as simple as opening a browser window in Chrome or trying to type into a text field. When I tried to use Windows it would simply freeze after only a short time and I'd have to do a hard reset.
I went to the Genius Bar at the Apple store which was unhelpful, so I continued searching through these forums to try to figure out the problem. I noticed a lot of people had trouble with the SATA cable that came with the computer because it's quite thin and delicate, and would get damaged when changing out the hard drive. However most of these people seemed to experience a question mark when starting up the computer, whereas mine would fully boot and be functional for a time. I thought it unlikely that a damaged cable could possibly leave the computer partially functional. Finally though I gave in a dropped the $26 for a new SATA cable on Amazon. As soon as I installed it the problem was fixed, and the computer runs as fast as when I first bought it. I don't know if I damaged the cable changing the hard drive (I was extremely careful) or if my original hard drive was not actually corrupted and the cable was already damaged. I mentioned the possibility of the cable being damaged at the Apple store and the representative said that often times they fail because people carry the laptop with one hand, and because of the way this model was designed this puts a lot of pressure right on that thin cable. Regardless, if you do plan on changing out your hard drive in your MacBook keep in mind that the SATA cable is sensitive, and that if you experience problems with a fresh hard drive and OS install the SATA cable is a likely culprit.

If you think you have either a hard drive or a cable problem, to the best of my knowledge the only product that can help isolate both of them is Scannerz. You can check it out at:
http://scsc-online.com/Scannerz.html
I think that's the correct link. If it isn't and you're interested and that's wrong, just google it. I'd also check out their downloads section, especially the sort of short document on using path isolation to detect and isolate problems.
Scannerz can detect both errors and irregularities. It uses the surface scan progress as a reference. Cable problems never show up at the same location because they're typically intermittent. Surface problems always show up at the exact same place. That's the only product (at least commercially available) that can do that.
I don't know if this information is of any value to you because it sort of sounds like you've already solved the problem, but it might be of use if you have problems in the future.
In any case, I've seen several posts on several different sites where people were reporting insulation break down on some of the SATA cables. Apparently the insulation breaks down and the cable starts shorting to the case.

Need help with Macbook reinstall on new hard drive!

Hey Everyone!
So my old MacBook A1181 was damaged a bit in a fall from a shelf. I followed all the directions on PowermacMedic (bless them!) and put in a new LCD screen, as the old one was cracked. Cleaned a lot of cat hair out of machine while I was at it.
I also replaced the hard drive with a new one, because the old one had a question-mark-over-a-folder icon. I'm very proud of myself, as there are only four screws left over. LOL!
So now it's time to reinstall the Tiger system. The optical drive is not working, so I researched on how to make an external hard drive bootable, put the Tiger Installation on that and connected it via FireWire to the old MacBook.
Turned it on and pressed Alt/Option at the same time. Great...up popped the Tiger Installation information. I've clicked on Install, etc., and am at the point where I need to choose a destination drive. Except there is none listed.
I've gone to Disk Utility, and I can see the new drive there, but just the icon as the major piece of hardware...there's no sub-icon for it underneath, like there usually is.
So, any ideas on how to make my new hard drive readable so I can choose it from the Tiger Installer?
Any help would be much appreciated. I've never even attempted to do something like this before, and I don't want to give up just yet!
Jenny

Do this:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After the formatting has completed quit DU and return to the installer. Install OS X.

Acrobat 9 standard-new hard drive- how to reinstall

I had acrobat 9 standard on my old hard-drive. It crashed and now I want to reinstall/download to my new hard drive. How do I do this? In my account I see the product but can't download it. I can see the serial number. Thanks

If you originally downloaded it thru Adobe, then that will be your only option to download it - thru your account. If it is not provided as a link, there is likely nothing anyone can do here to change that.

Problem Installing XP Pro on New Hard Drive

Hi,
I 'm trying to install xp pro on a new Hard Drive and, following formatting, a RED slider went across the screen and a message; re-starting remove any disc from drive 'A' . At that point the screen went blank and hard drive light was lit. I took the xp disc out the CD drive and re-started I now get a screen asking me to shift-tab to display network boot option menu,at which point it is frozen ! Help please
Pete

Quote from: Fredrik Åsenius on 25-April-07, 01:09:49
It shuts down? Doesn't restart?
What is the difference in environment from the shop and your place?
Shutting down is normally - still - a sign of the processor turning itself off to protect itself. It's not alive long enough in BIOS, to make you see the temp?
I doubt you keep the computer in the cupboard, but it should anyway have about 50 cm free space in every direction (except downward of course).
Fredrik, The difference between home and shop, I keep the PC in a PC stand at ground level. I could improve its position slightly however, it has been sighted there for aroung eighteen months! The shop guy didn't seem overly concerned by the 49c temp, (he thought the fan was ok) which increased to around 56c with 1.5gb ram installed. When i tried to get into bios I was probably too late hitting delete key has it went to windows scan! After the problems I'd had last week with my original hard drive I didn't want to take any more risk's! Its seems obvious the cpu temp is affected with the extra ram, any ideas?
Thanks Pete

Need Win 7 recovery discs for new hard drive

I am not sure which Windows 7 Operating system my laptop had, but I need the recovery discs to put Windows 7 back on my HP dv6-6167cl notebook.
My original issue was that my notebook was unable to restore or anything on its own. After calling HP support and performing a guided diagnostics test, it was determined that my hard drive was bad. I purchased a new hard drive and replaced it, but need to get Windows 7 back on it.
Thanks!
This question was solved.
View Solution.

Hi,
Your notebook originally shipped with Windows 7 Home Premium 64bit - you can order a replacement set of Recovery Media from the link on your Product Page below.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5118...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My Mac Pro had new hard drive installed. I downloaded the latest iPhoto application. All my photos have been restored to a folder which I dragged to the iPhoto icon. The photos are not down loading.

My Mac Pro had a new hard drive installed. Everything was restored by Carbonite except my photos. Carbonate restored them to a folder and the folder was dragged over the newly installed iPhoto app. The photos are not installing. What next?
Ron Rushford

What happens when you try File -> Add to Library?

Re-Register Quicktime Pro on New hard drive???

I've put a new, larger hard drive in my G4. I've gone the manual route in re-installing many of my programs.
Can anyone tell me how to re-register my $30 Quicktime Pro on my new hard drive?
Thanks,
dalano

To Apple Discussions!
Open QuickTime>QuickTime Preferences>Register

My old hard drive is dead and I need to move iTunes to the new hard drive

My computer's old hard drive contained some corrupted Windows files. A friend was able to get my husband's iTunes file off the old hard drive and it's saved in the My Music folder on the new hard drive. Can someone please give me super easy to understand instructions on how I get the iTunes stuff onto the new hard drive? I don't want to mess anything up because he has such a large number of albums in the iTunes folder. Thank you in advance!

It sounds like you just have 2 formatted drives (SSD, HDD) that are not configured as a Fusion drive. If so, you have to manually move files from the SSD to the HDD and visa versa.
If your system would have come configured with a Fusion drive (SSD and HDD 'fused' together) then OS X would maintain file movement from the SSD to the HDD without user intervention.
Look here then scroll down to Introducing Fusion Drive for a brief explanation.

Received macbook pro with new hard drive

I just got back my laptop today from a shop i had a warranty at and they installed a new hard drive and also a hard drive cable.
They gave me my old hard drive in a plastic bag and i was wondering if there was still anyway for me to get the stuff off of it because my latest backup was all the way in january which *****.
not sure if my old hard drive is suppose to have a cable connected because it doesnt. The problem with my macbook was i kept getting a white screen with a circle and dash going through it, during start up.
Is there anything i can buy to try and see if i can get the files off or what?
im not sure if the hard drive still works or what because they didnt tell me anything

Or something like this:
http://www.walmart.com/ip/40900062?wmlspartner=wlpa&adid=22222222227028516939&wl 0=&wl1=g&wl2=c&wl3=61188529929&wl4=&wl5=…
very cheap and versatile.

M7 -j010dx: need help w/recovery Windows 8 new hard drive

installed new hard drive installed (old one hard disk (3f0) error and confirmed dead by Geek Squad). I have recovery discs from HP. how to proceed from here? Tried the "put App and Driver recovery disc in and turn on" route. no go and same "Boot device not found. Please install operating system on your hard disk. hard disk (3f0)." error comes up.
Is there more to the process than this? I'm not getting what's going on.
Thanks in advance...
This question was solved.
View Solution.

correct. kicked it right back out.
still moving positive...

I need to reactivate ACROBAT PRO on new hard drive

Similar Messages

Maybe you are looking for