I need to reconnect media when I use a notebook mackbook pro when I travel.

I am using FCP studio 2 using Mac OSX. and Used a LaCie RAID to store my video.
I use a back up Tobshia hard drive that I would like to use when I travel with my MacBook Pro. But it seems that
I have to reconnect the media even though I did not change any files or folders.
This did not happen when I used a Licea external hard drive, only when I transferred to the Tobshia.
Maybe it worked before, when the external and internal RAID hard drives were both LaCie?
How do I use my external hard drive of any make, plug it into my MacBook Pro equipped with FCP Studio 2, and not have to reconnect meida?
THANKS!

The path that Final Cut is expecting to find the media files must be identical. If your external drive on your desktop is named "Fred" and the files are in a folder named "Project One" then the external that is connecting to your laptop that you transferred the files to also needs to be named "Fred" and the files also need to be in a folder named "Project One".
MtD

Similar Messages

  • HT2188 i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/s

    i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen

    Have you downloaded and installed the latest version of iTunes from here:
    http://www.apple.com/itunes/download/

  • Is there a special inverter to use with my MacBook Pro when traveling in Europe?

    Is there a special inverter to use with my MacBook Pro when traveling in Europe?

    No, it will handle the voltages there:
    From http://www.apple.com/macbookpro/specs.html
    Electrical and operating requirements:
    Line voltage: 100V to 240V AC
    Frequency: 50Hz to 60Hz
    You might need a plug adapter to change the pin shape in some countries.

  • I keep getting the start menu and various programmes opening when I use a series of keys when working in my accounting programme, I am not using the command key and is very frustrating me, can anyone help me?

    I keep getting the start menu and various programmes opening when I use a series of keys when working in my accounting programme, I am not using the command key and is very frustrating, can anyone help me?  I am working on a Mac OS X Version 10.6.8, just need to know if I can reprogram the keys to stop this happening?

    Safari browser and menu shortcuts:
    http://docs.info.apple.com/article.html?artnum=42951
    Mac OS X keyboard shortcuts:
    http://support.apple.com/kb/HT1343
    http://docs.info.apple.com/article.html?artnum=75459
    Changing behavious of Function Keys:
    http://support.apple.com/kb/HT3399?viewlocale=en_US
    and more useful information on keyboard shortcuts here:
    http://www.myfirstmac.com/index.php/mac/articles/mastering-keyboard-shortcuts
    How to re-map individual keys:
    http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&item_id=ukelele

  • Is normal that appear a spot  when i use the camera? and when you apply the zoom, the spot increases its size?

    Is normal that appear a spot  when i use the camera? and when you apply the zoom, the spot increases its size?

    Morning alex navarro,
    Thanks for using Apple Support Communities.
    For troubleshooting on this, take a look at this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Hope this helps,
    Mario

  • PhotosmartD110 need to reconnect wireless after each use

    I have a MacBook Air. My printer used to work fine on my Toshiba PC at my old home. It took some time to get the printer working, and now it seems to need to reconnect to wireless each time I use it. Thanks.

    We have restarted the router numerous times. We do not have this problem when printing from our PC.
    Router: Netgear Super Hub 2ac (provided by Virgin Media in UK)
    OS: OS X 10.9.3
    Hope that helps get advice

  • No internet access when i use my notebook into a router

    I am trying to use my notebook as a repeater.
    I enabled the  MS Virtual WiFi Miniport Adapter and configured it with a SSID and password.
    The connection seems to be alright, but when connecting my phone to this connection, I get no internet access (the phone is connected and receives an IP with no problem, but when trying to connect to the internet, as if there is no connection).
    I am running windows 7

    I am trying to use my notebook as a repeater.
    I enabled the  MS Virtual WiFi Miniport Adapter and configured it with a SSID and password.
    The connection seems to be alright, but when connecting my phone to this connection, I get no internet access (the phone is connected and receives an IP with no problem, but when trying to connect to the internet, as if there is no connection).
    I am running windows 7
    wifi repeaters are specialized and its cheaper and easier to get one on ebay, they are low cost and are popular to deal with dead spots with wifi both with business and homes alike
    Corsair Carbide 300R with TX850V2
    Asus M5A99FX PRO R2.0 CFX/SLI
    AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
    G.SKILL RipjawsX DDR3-2133 8 GB
    EVGA GTX 660 Ti FTW Signature 2 (GK104 Kepler)
    Asus PA238QR IPS LED HDMI DP 1080p
    ST2000DM001 & Windows 8.1 Professional x64
    Microsoft Wireless Desktop 2000 & Wacom Bamboo CHT470M
    Place your rig specifics into your signature like I have, makes it 100x easier to understand!
    Hardcore Games Legendary is the Only Way to Play!

  • How do l transfer all my music to a new device. It show my music in iTunes when l use my old device but when l go to sync it to the new phone there is no music in itunes

    How do l transfer my music . When l put my old device in to the computer it come up in iTunes and when l put my new device in to transfer the music there is nothing in iTunes . What an l doing wrong.

    When l put my old device in to the computer it come up in iTunes
    You need to sync the content from the old device before you can sync the new one.
    iOS: Syncing with iTunes

  • Preuut and postuut sequences are not executing when run using UI. They run when using the sequence editor.

    I am using TestStand 3.5 and LabVIEW 8 in a Windows XP environment.
    I have a sequence that runs properly when run from the sequence editor.  I have made a few minor mods to the simple Operator Interface that ships with TestStand.  When I run my sequence using the modified Operator Interface, the PreUUT and PostUUT sequences do not execute.  Only the main sequence executes.  This also happens when I run the demo sequences that ship with TestStand.
    What am I missing?

    Hi,
    It sound like you are executing the sequences without the process model, do you get a report at the end of the execution?
    What are these minor mods you have done?
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Can Siri enable the speaker on phone calls when I use the "hey  Siri" feature when the phone is plugged in

    TTrying to get Siri to put phone on speaker so I can talk without touching the phone Using the hey Siri feature

    When you say "shift to speaker mode" are tapping on "speaker" icon thta appears on the screen when you take the phone away from your ear? IF so go to settings/general/accessibility/incoming calls and check "default"

  • HT4437 I get good response when I use the remote app but when I try and use airplay it could be five minutes between frames. Any ideas?

    Seems to work very sporadically on airplay but no problem on Remove app.

    Hi Bob,
    When I went to see what version of the TDM Excel Add-in I had installed, I discovered that my previously working TDM Excel Add-in was suddenly exactly reproducing your symptoms (totally unresponsive) -- I too have Win XP SP2 and Excel 2003.  I then followed the steps from the web site that Julia posted above:
    1)  Manually deleted the TDM Excel Add-in from the Excel toolbar
    2)  Manually uninstalled the "Excel TDM Add-in" from "Add and Remove Programs"
    3)  Manually installed the "Excel TDM Add-in" from this web page:
         http://zone.ni.com/devzone/cda/epd/p/id/2944
    Now when I restart Excel, I get the floating TDM Excel Add-in icons, and they work perfectly.  I was able to verify that the version that works on my computer is indeed 2.0.1.4.  By the way, how do you know what version you're using, if the "About" icon is unresponsive?
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • When to use a JMS Bridge and when to use a Proxy

    Hi,
    We currently are running an OSB with most connections coming in via MQ to a JMS queue. We've been asked to implement a JMS Bridge.
    Wen using a messaging bridge to a foreign provider, the documentation recommends using the Foreign JMS option to simplify the creation of bridge destinations anyway.
    The key difference with using the bridge, is that you remove responsibility for the network transfer of messages from OSB's proxy and give it to the bridge. However, this now means that the messages are stored in WebLogic JMS with all the implications that brings. Is that really what you want? Isn't the whole point of MQ to be your reliable messaging service and not to use WebLogic JMS instead/as well?
    But the Solutions design team mention
    Without bridge
    MQ >--------Receive -------->---------Send ---------> JMS
    | ....... Transaction 1 ....| .....Transaction 2 ......|
    With bridge
    MQ >--------Receive -------->---------Send ---------> JMS
    | ....... ............Transaction 1 .......... ......|
    Is this true, so we have to use a bridge?

    I think your solution design team is wrong..
    MQ --> OSB Proxy Receive ---> OSB Proxy Send --> JMS will be a single XA transaction.
    An OSB proxy is preferred in this case for the following reasons:
    1. Don't use bridge for receiving messages . Bridge should be used rather for sending messages to non highly available remote messaing providers. Even for this case weblogic recommends SAF .
    2. Whatever the savings on transaction as mentioned by your design team doesn't appears to be correct.
    3. Weblogic messaging bridge appears to be a buggy product. You will have to apply a couple of patches to make the bridge to work as expected. It will take some time to stabilise it in a production environment. Weblogic's EJB container is much stable and with MDB's it would be less prone to bugs. This is from my personal experience. Others might have a different experience.
    4. You can leverage the out of box monitoring facilities provided by OSB. This can give you stats of how many messages were transferred between MQ and JMS, average & max response time etc.

  • When to use 'Web dynpro ABAP' and when to go for 'Web Dynpro Java'

    Hi,
    I am trying to learn 'Web dynpro ABAP' from tutorials available on SDN as i am presently working in ABAP. I am also Java learned.
    Please tell me the selection criteria for using Web Dynpro component / application using ABAP or JAVA.
    Regards,
    Tanaya

    Hi,
    Go through this
    Web Dynpro: ABAP or Java?
    WebDynpro for ABAP Vs Java
    Re: Javascript future in Webdynpro (JAVA and ABAP)
    Javascript future in Webdynpro (JAVA and ABAP)
    PradeeP

  • How does time machine work when being used with a mac pro?

    How does time machine work when backing up a mac pro?
    Considering the fact that the mac pro can hold 8TB and a external (non NAS) hard drive can hold only 2TB does time machine only backup the OS disk.

    macnewcomer22 wrote:
    Considering the fact that the mac pro can hold 8TB and a external (non NAS) hard drive can hold only 2TB does time machine only backup the OS disk.
    Time Machine will backup everything by default, on every disk in your Mac.
    Choose System Preferences > Options to exclude items. You could exclude everything except your OS...but I'd think it is your data that's more important to you, if you have to make choices.
    See...
    http://discussions.apple.com/thread.jspa?threadID=1964018
    While it's true you can store almost 8TB, how much do you think you'll actually store? If you have 1TB of data you want to store then a 2TB drive can do it. Also when your TM drive begins to get full it will begin deleting the oldest backups to make room.
    You could also get a Drobo with 8 bays...
    http://www.drobo.com/products/index.php
    -mj

  • Sometimes the text on a web page is distorted or looks like it overlays other text. Some web sites the text gets totally mis-aligned. The same sites are fine when I use IE. And sometimes, when typing ... the cursor goes awry.

    Text is overlaid on text to render the page unreadable. sometimes columns are totally misaligned.

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)<br />
    See:
    * http://kb.mozillazine.org/Zoom_text_of_web_pages
    If you have increased the minimum font size then try the default setting 'none' as a high value can cause issues like you described.
    * Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    * Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
    See also [[Websites look wrong]]
    If you need to increase (or decrease) the font size on websites then look at the NoSquint or Default FullZoom Level extension.
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    * NoSquint - https://addons.mozilla.org/firefox/addon/2592

Maybe you are looking for

  • How to encypt a .txt file and how to decrypt a same .txt file when i need

    My requirement is i want to encrypt a .txt file and keep it in some folder. In that file we put database connection information. when ever we need that file we have to access it and decrypt it. with that decrypted values we have make connection with

  • Download to Excel Function in ALV

    Hai Friends, I am using the following methods to download the report to an Excel Sheet from ALV. CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG CALL FUNCTION 'GUI_DOWNLOAD' The report is downloaded to Excel but the Column names are not displa

  • FaceTime problem. Help!

    Hello, Apple buddies. Please help me. I am not able to open my FaceTime account in my iPad . Apple is saying that I'd is already in use. I had changed my password but still, I am not able to do so. I want to first disable my FaceTime account. Help!

  • Window shutdown when using java

    Greetings, since a short time i've having probs when using the java. For a time all goes well, but then the IE window just shuts down. No warning or whatever.... Anyone any ideas? Tnx in advance

  • Error while using custom xslt: Cannot find the script or external object that implements prefix 'ScriptNS0'.

    Hi, We had a complex map. Because of some requirement, we used custom xslt on this map. Somehow at runtime that custom xslt is giving below error: Cannot find the script or external object that implements prefix 'ScriptNS0'. I checked below links, it