I need to recover idvd

I have Mac OSX v 10.6.4 And my Idvd aplication is gone, how can I recover it with out loosing any data? PLEASE IS URGENT, I NEED HELP!!!

I dvd was not in a udate but its back now.

Similar Messages

  • TA24002 My 500 GB can't verify nor repair. I have photoshop work that I need to recover. I would like to know which erase option would be the best solution for this problem.

    My 500 GB can't verify nor repair. I have photoshop work that I need to recover. I would like to know what option would be the best solution for this problem?

    You appear to have two issues: 1) a hard drive that is not working properly and 2) files you wish to recover.
    Re 1) you need to answer Kappy's questions.
    Re 2) does the drive load and can you see your photo files? If so can you copy them to another drive?
    Do you not have a backup of the photo files?

  • How to find out which archived logs needed to recover a hot backup?

    I'm using Oracle 11gR2 (11.2.0.1.0).
    I have backed up a database when it is online using the following backup script through RMAN
    connect target /
    run {
    allocate channel d1 type disk;
    backup
    incremental level=0 cumulative
    filesperset 4
    format '/san/u01/app/backup/DB_%d_%T_%u_%c.rman'
    database
    }The backup set contains the backup of datafiles and control file. I have copied all the backup pieces to another server where I will restore/recover the database but I don't know which archived logs are needed in order to restore/recover the database to a consistent state.
    I have not deleted any archived log.
    How can I find out which archived logs are needed to recover the hot backup to a consistent state? Can this be done by querying V$BACKUP_DATAFILE and V$ARCHIVED_LOG? If yes, which columns should I query?
    Thanks for any help.

    A few ways :
    1a. Get the timestamps when the BACKUP ... DATABASE began and ended.
    1b. Review the alert.log of the database that was backed up.
    1c. From the alert.log identify the first Archivelog that was generated after the begin of the BACKUP ... DATABASE and the first Archivelog that was generated after the end of the BACKUP .. DATABASE.
    1d. These (from 1c) are the minimal Archivelogs that you need to RECOVER with. You can choose to apply additional Archivelogs that were generated at the source database to contininue to "roll-forward"
    2a. Do a RESTORE DATABASE alone.
    2b. Query V$DATAFILE on the restored database for the lowest CHECKPOINT_CHANGE# and CHECKPOINT_TIME. Also query for the highest CHECKPOINT_CHANGE# and CHECKPOINT_TIME.
    2c. Go back to the source database and query V$ARCHIVED_LOG (FIRST_CHANGE#) to identify the first Archivelog that has a higher SCN (FIRST_CHANGE#) than the lowest CHECKPOINT_CHANGE# from 2b above. Also query for the first Archivelog that has a higher SCN (FIRST_CHANGE#) than the highest CHECKPOINT_CHANGE# from 2b above.
    2d. These (from 2c) are the minimal Archivelogs that you need to RECOVER with.
    (why do you need to query V$ARCHIVED_LOG at the source ? If RESTORE a controlfile backup that was generated after the first Archivelog switch after the end of the BACKUP ... DATABASE, you would be able to query V$ARCHIVED_LOG at the restored database as well. That is why it is important to force an archivelog (log switch) after a BACKUP ... DATABASE and then backup the controlfile after this -- i.e. last. That way, the controlfile that you have restored to the new server has all the information needed).
    3. RESTORE DATABASE PREVIEW in RMAN if you have the archivelogs and subsequent controlfile in the backup itself !
    Hemant K Chitale

  • A recent drive failure forced a complete re-install of all windows Vista system software I was able to revive old hardisk & I need to recover my bookmarks.

    I recently suffered a hard drive failure that managed to take months worth of valuable work when it failed. I replaced the hard disk drive in my laptop and completed a fresh install of Windows Vista and all the programs that were used on that system which included Firefox. After finding an exact match of the drive that failed I managed to get the drive running again by replacing the drives control board and I am now able access the data on the drive.I usually really anal about backing up all of my valuable data but I have been so busy with my current project my usual habits went to the wayside. I need to recover the Firefox bookmarks from the old drive and recover them to the new drive but I haven't been able to find the file that contains the bookmarks from the previous installation of Firefox. Could somebody please help me locate these valuable bookmark files

    See:
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    The "Application Data" folder in XP/Win2K and the "AppData" folder in Vista/Windows 7 are hidden folders.
    *http://kb.mozillazine.org/Show_hidden_files_and_folders
    *http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  • Blue Screen on Satellite P100 - need to recover data

    On switching on my laptop yesterday I was faced with a blue screen error message which even after running chkdisk keeps on appearing, even when rebooting in safe mode.
    The problem is I only have Toshiba recovery disks (not an XP disk - XP was pre-installed on the laptop) and they say on them using the recovery disk wipes the computer and I need to recover data on the hard drive before reformatting.
    I've taken the laptop to the local repair centre and they say they have to reformat and dont do data recovery.
    Any suggestions gratefully received.

    Thanks very much for your replies and apologies for the delay in replying but I have only just managed to get my laptop reconfigured and get back online!!!
    I took the laptop to the local Toshiba repair centre and they ran some tests and said that there was no problem with the hardware. However, when I took the machine to a specialist company to get the data recovered they reported 'serious errors in the file allocation table'. They managed to recover most of my data but when the hard drive was re-formatted the problems returned so I had to purchase a new hard drive which wasnt cheap.
    My laptop is under warranty and I am a little annoyed that they said there was no problem with the hard drive when there patently was. I would like to reocover the money from Toshiba spent on the drive. (laptop under warranty)
    Many thanks in anticipation.
    Sean

  • I need to recover deleted data from my iPhone 4S but don't have a recent backup. I thought by pressing sync on my macbook this would back up-but I was wrong. There are no backups on my macbook and the latest backup on iCloud was Jan 2012. Please help

    I need to recover deleted data from my iPhone 4S but don't have a recent backup. I thought by pressing sync on my macbook this would back up…but I was wrong. There are no backups on my macbook and the latest backup on iCloud was Jan 2012. My mum died in May and I had lots of text messages that I wanted to keep. I really want to get them back. Is there any way at all I can get that deleted data from the phone?

    Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer.  As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
    You can try and find 3rd party applications that might help you.  I'm sure you'll pay, however.
    Let this be a very important lesson learned.
    Best.

  • Urgent help : Need to recover a database without backup and archivelogs

    Hi,
    We are in urgent need to recover a database without backup and archivelogs
    one datafile seems corrupted
    SQL> recover automatic database until cancel using BACKUP CONTROLFILE;
    ORA-00279: change 10527325422479 generated at 07/27/2011 03:13:04 needed for
    thread 1
    ORA-00289: suggestion : /pys/u5/oradata/PYS/PYSarch/arch0001.0000181845.arc
    ORA-00280: change 10527325422479 for thread 1 is in sequence #181845
    ORA-00278: log file '/pys/u5/oradata/PYS/PYSarch/arch0001.0000181845.arc' no
    longer needed for this recovery
    ORA-00308: cannot open archived log
    '/pys/u5/oradata/PYS/PYSarch/arch0001.0000181845.arc'
    ORA-27037: unable to obtain file status
    HP-UX Error: 2: No such file or directory
    Additional information: 3
    Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
    CANCEL
    ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
    ORA-01152: file 1 was not restored from a sufficiently old backup
    ORA-01110: data file 1: '/pys/u2/oradata/PYS/pay_system_01.dbf'

    N Gasparotto wrote:
    bsac14 wrote:
    my database is in no archive mode
    can you please tell how to restore
    yes it is a datafile corruptionYou did not say how you defined that's a datafile corruption. You provide minimum to zero information.
    I just need to bring the database up,no need any exact data
    I can refresh from prod laterThen drop and recreate database. Basically and since you are not in archive mode, no recover is possible. Period.
    Nicolas.Hi,
    How did you come to the conclusion that your datafile is corrupted? Can you provide and supported logs?
    Regards .....

  • Help need to recover corrupted ipad backup

    I need help recovering a corrupted ipad backup. I was unable to restore my ipad from the backup when upgrading to ios 4.2. Does anyone know of a program that will allow me to decrypt the data from this backup?? Any hints or help would be greatly appreciated. Thank you so very much!

    Your best option would be to try a program called backup extractor. It is mac only

  • Erased my disk need to recover data

    So this is what happened (in details):
    1. I dropped my mac book pro accidentally (Have to complain that mag safe DIDN'T WORK AT ALL)
    2. By using Command+R+Power,mac checked it was caused by a damage from hard disk.
    3. By using Shift, I entered safety mode.
    4. Disk Utility stated that it couldn't first-aid it, so I had to erase all my data.
    5. I just got my Pro for one week so I didn't time machine it.
    6. After erasing all my data, I installed Mac OSX again.
    7. Even though I didn't time machine it, I already transferred some important pictures to my Mac without leaving copies on my old PC.
    8. I REALLY REALLY need to recover, at least, those pictures.  They are so precious for me.  I know it's my fault but I really do think that mac is solid. 
    9. SO HELP ME PLEASE!

    I'm afraid that if you erased your hard drive, those photos are long gone. There are some data recovery apps out there (DIskWarrior, Data Rescue 3) that may help, but a data recovery center is likely your best bet - and they can be expensive.
    I seriously doubt that you'll be able to recover your data - please look at coming up with some sort of backup scheme to prevent such a loss in the future.
    Clinton

  • I need to recover all my notes from Ghostwriter. When I double click the icon nothing happens. I am sick to my stomach! Can anyone help me?

    i need to recover all my notes from Ghostwriter. When I double click the icon nothing happens. I am sick to my stomach! Can anyone help me?

    Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
    Call Apple Care and see if your device is still under warranty to get it replace

  • ATTN NEED TO RECOVER OLD SKYPE NUMBER

    ATTN NEED TO RECOVER OLD SKYPE NUMBER Hello there...... I had a subscription and a skype number assigned. I let the number lapse and just realized it. I need to recover that phone number. I call it and it says it is out of service yet I cannot select it as a new number and I see no way to recover my old number within my account settings etc. Please advise and have a great day!!! Thanks have fun all the best!!! Peace................................................ward

    Hi, Loppies, and welcome to the Community,
    Your Skype Number should have been held in reserve for you to renew for a period of 90 days following the subscription end.  Beyond that timeframe, the number is released/recycled back into the system.
    Skype Customer Service may be able to provide more detailed information.  Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
    As you know you wish to contact Customer Service, skip past Step 2 of the instruction and proceed to Step 3, Continue Support Request. You may also skip past in Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started!
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • I need to recover everything from my itouch to my computer

    Can someone help!!! I need to recover everything from my itouch to my computer

    No. Back them up before proceeding.
    (87096)

  • It needs to recover by hand when the fail-over occured.

    Hi all,
    I have the database using Oracle10g(10.1.0.5)SE on Windows Server 2003 with HA Cluster using Oracle Fail Safe(3.3.4).
    It had smoothly run with fail-over before.
    But now,It needs to recover by hand when the fail-over occured.
    Even no connection with it,it needs to recover by hand.
    Have anyone met same situation or Is someone who understand it?
    Thanks in advance.
    Tom

    Hi Frank...
    I see from your post, no one was able to help you however, I encountered this EXACT same scenario and don't know what to do to fix this. What did you finally do???  -- Andy

  • Tried to update software and came back 3hrs later and there is nothing on my ipod, no apps, music says it doesn't recognize and need to recover Please help!!

    tried to update ipod and came back 3hrs later and there is nothing on my ipod.  all apps and music etc are gone and computer doesn't recognize my ipod and need to recover.  Please help!!

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • I need to recover deleted notes from my iPhone 6 with PhoneRescue but it won't open on my MacBook Pro OS10.7.5

    I need to recover deleted notes from my iPhone 6 with PhoneRescue. I installed the App but it won't open on my MacBook Pro OS10.7.5

    The Software Update pane of System Preferences won't show full version upgrades. If your Mac is compatible with Yosemite, you can either download it from the Mac App Store or order a download code for Mountain Lion from the online Apple Store.
    (122645)

Maybe you are looking for

  • Firefox-tmpfs-daemon : sync your mozilla directories to tmpfs

    Hi ! I've just written an ugly daemon script to relocate firefox profiles directory to a tmpfs ! http://aur.archlinux.org/packages.php?ID=48746 I know, it does the same as firefox-sync, but I've used another approach : the sync is made at boot and st

  • Calling SQL Loader using HOST command from Developer Forms 4.5

    I want to execute a set of code from D2K Forms 4.5 which has interfface with Client - OS ( In my case Windows NT/XP). I want to execute SQL Loader from Forms using Host Command and then after completion of that process, I want to do next transcations

  • Cannot Close Tabs in Minefield That's Running Flash

    Just wanted to report a bug I've been noticing.  I'm using Minefield (64-bit) prerelease 4.0b7pre and when I have a tab open that has 64-bit flash running in it, I cannot close the tab anymore.  I need to close the entire browser instead.  This is re

  • N8 lock switch?

    When watching reviews of the n8, I seemed to be under the impression that the lock switch was a 2-state on/off type switch, but when I got mine, turns out it's a spring-loaded slider button. Was this a recent design change, or has it always been that

  • Can a Mac act as a 3G to wifi bridge?

    If a MacBook Pro is connected to the internet using a 3G dongle, can internet sharing allow a wifi connection to an iPad? I'm still debating whether to get a Wifi only iPad.