I need to reinstall 4.o to work with my company web site. They cannot handle the 5.0 at this time, and I just upgraded not knowing this information. Thanks
Cannot log into Company (Employee) Web Site using 5.0. Need to reinstall 4.o. Can this be done?
#A link to Firefox 4 versions will not be offered by any '''''responsible''''' contributor here, because Firefox 4 versions contain stability and security issues <u>that will not be corrected</u>. Firefox 4 is a thing of the past.
#The only currently supported versions that a '''''responsible''''' contributor here will offer are Firefox 5 and Firefox 3.6.18. Firefox 3.6.18 is currently scheduled for support for only 2-3 more months, then it, too, will be a thing of the past. Firefox 6 will probably be introduced about the time the Firefox 3.6.18 support is discontinued.
#To downgrade to Firefox 3.6.18, follow these instructions '''''very carefully''''':
#*Back up your personal information (bookmarks, passwords, etc.) before proceeding just in case something goes wrong: https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
#**'''''If you need to''''', see the following article. See the last 2 sections "Copying files between profile folders" and "Your important data and their files" to restore important information '''''if something goes wrong in the downgrade''''': https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
#*Download and SAVE Firefox 3.6.18 to your Desktop, then proceed as in the "Clean re-install" article below: https://www.mozilla.com/en-US/firefox/all-older.html
#*Clean re-install: http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
#*You may also need to reset your extension databases in your profile folder. Do the procedure after locating your profile folder (see "Back up your personal information" above) and closing Firefox. The files will be automatically re-built when you re-start Firefox: http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Corrupt_extension_files
Similar Messages
-
Will Robo Form work with any of you new browsers? I am still running FF 3.6 and will only upgrade if RF works. I tried the browse after 3.62 and it did not support Robo form so I uninstalled it
Hi there! Actually, Roboform works with modern versions of Firefox. Please update to Roboform 7.9.0, and update Firefox to version 22 immediately. Continuing to use Firefox 3.6 is leaving your computer at risk for MAJOR security holes, plus known stability and performance issues. Please update immediately.
Also, Firefox will work perfectly fine with XP SP2, but there is no reason why you shouldn't update XP to SP3 -
Cannot load the recovery media since my keyboard and touch pad do not work
My labtop Toshiba C55D-A5392 may have a virus issue which cause the keyboard and touch pad do not function. initially only a few keys don't work...after a couple days most keys don't work and now no keys are working and the touch pad failed too. I can't even load up windows now. I bought a recovery media from toshiba and try to reset the laptop to factory settings. I received the USB drive media from Toshiba, but I cannot load it since I cannot get the laptop into the bios (since my keyboard does not work). Can anyone help me to resolve this issue?
Try pressing the fn key and f2 to reach bios
or
try a usb mouse from your desktop
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!**** -
The latest iTunes can't access my windows (including Vista 32 & 64bit, nor Windows 7 64 bit and 32 bit versions) "Runtime" library. I've tried reloading the windows suggested .dll as well as doing a system restore and also downloaded the iTunes update and load it manually, but nothing will work. Is Apple aware of the problem and planning to release a fix, or do I have to abandon iTunes and my iPod?
Hello there, Enantiomer.
The following Knowledge Base article provides some recommendations for troubleshooting:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Hey there, Ihave the latest firmware update on my Apple TV 2. I have Lion with latest updates installed.
I have home sharing turned on in iTunes 10 no issues their
Network is set up as such.. Apple TV hardwired with Ethernet Cable, MAC where iTunes resides is WiFi on a dual band wireless N network. No dropped connections, network showing in perfect connected status.. All other home networking functions working perfectly. No wireless or ethernet disruptions.
Apple TV works perfect for about one hour then all of a sudden stops and says home sharing is turned off.. but it's not. Double checked iTunes on the MAC, home sharing still set up no issues. I restart iTunes.. does not help, reboot MAC does not help. Reset Apple TV doesn't help.
About an hour later, home sharing shows up in Apple TV again..
Anyone else experience this? Any thoughts as to why Home Sharing on the Apple TV stops by itself when no changes are occuring?Hey there, Ihave the latest firmware update on my Apple TV 2. I have Lion with latest updates installed.
I have home sharing turned on in iTunes 10 no issues their
Network is set up as such.. Apple TV hardwired with Ethernet Cable, MAC where iTunes resides is WiFi on a dual band wireless N network. No dropped connections, network showing in perfect connected status.. All other home networking functions working perfectly. No wireless or ethernet disruptions.
Apple TV works perfect for about one hour then all of a sudden stops and says home sharing is turned off.. but it's not. Double checked iTunes on the MAC, home sharing still set up no issues. I restart iTunes.. does not help, reboot MAC does not help. Reset Apple TV doesn't help.
About an hour later, home sharing shows up in Apple TV again..
Anyone else experience this? Any thoughts as to why Home Sharing on the Apple TV stops by itself when no changes are occuring? -
All of a sudden my iTunes stopped working, and I get the following error messages:
1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
and
2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
This is not working. I've tried installing as Administrator but doesn't make any difference at all.
There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
ThanksClick here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99192) -
I need to reinstall acrobat 9 after having my mac hard drive wiped. I have the serial number but there isn't a download link on the adobe website
well PhillyPhan, I can't tell that you're better looking just by your iphoto icon, now can I? Although it is a lovely sunset you've got there.
Thanks for your response to my question, I see your point and will do that, however, I have another folder that was created before I had a Mac, which has all sorts of lovely titles and labels and some of those pictures I brought over to my ibook when I first started. So there are some duplicates in my iphoto library that I already have backed up in that other folder. I guess I shouldn't really obsess about those. I guess I am just nervous about deleting all my prior iphoto library, but I should have faith that it will all be there in my pictures library. Just trying to clean up the virtual mess.
I'll hold my breath and take the plunge.
Thanks!
ibook G4 -
ok. I hope someone can answer my question. I am new to photoshop. I need version cs4 in order to work with a designer and printer on some logo work. I've tried to download it but it just gives me individual files with no installer and nothing - including the adobe "instructions" seems to work. How can i get this software in a downloadable format? is it actually free - I'm assuming it is... Hope someone knows the answer to these questions...
The download itself is free and is valid for 30 days only. After that, the software ceases to work.
CS4 is pretty old, no longer sold and no longer supported by Adobe. It's also not compatible with many modern OSes.
Why do you have to work with such an obsolete version of Photoshop?
What kind of "designer" uses it? -
Is Flash CS6 download still available to CC subscribers? I need to create a SWF to work with AS2.
Is Flash CS6 download still available to CC subscribers?
I need to create a SWF to work with AS2.Get CS6 Apps from Cloud Subscription:
Download previous versions of Adobe Creative applications -
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html -
I cant upgrade camera raw and need to to be able to work with new camera files why?
i cant upgrade camera raw and need to to be able to work with new camera files why?
Boilerplate text from Best Practices FAQ
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
* Adobe product and version number
* Operating system and version number
* The full text of any error message(s)
* What you were doing when the problem occurred
* Screenshots of the problem
* Computer hardware, such as CPU; GPU; amount of RAM; etc. -
Need help reinstalling Acrobat X pro for MAC. Got one site but I-tunes didn't recognize so couldn't go further. I have serial
Actually, you can and have downloaded from there, because that message only happens when the download is finished.
The message is entirely normal, and is Apple's way of encouraging the world to use the Mac App Store. That doesn't help you because Acrobat isn't in the Mac App Store - it isn't allowed there.
So, what to do? Change your system settings
Please follow the steps given below to resolve this issue -
System Preferences > Security & Privacy > General > Allow applications downloaded from > Anywhere -
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
AndyIf you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy -
I have used Firefox for years but recently I've had instances where Firefox will not work with some web sites. The most recent is Walgreens photo. I spent about an hour being frustrated then called Walgreens. They told me that I had to use Internet Explorer. Sure enough it worked fine. Can Firefox be made compatible with Walgreen's web site?
Walgreens would need to make their web site compatible with Firefox.
-
my Extensis suitcaseX 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and my existing CS design software?
If you upgraded to Snow Leopard, then it would seem that Suitcase 11 is not compatible with Snow Leopard and you'd need to buy Suitcase Fusion 3 for $99.95.
-
I have a WiFi system in the house that uses the Airport Extreme for a hub and an older Express for sending music from my Mac to my sound system. Everything worked great till yesterday. When I go to Networks I see the Extreme and I see the Express but the Express is no longer connected and I get an error message "this version of AirPort Utility doesn't support this base station". Any ideas?
This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.
Maybe you are looking for
-
Adding Time Capsule (for Multicast DNS) to existing router
I have recently moved into a place where I am sharing internet with others (family). My macs can see their PC's. My macs cannot see my macs. Wireless Macbook Pro Hard wired Mac Pro into Netgear router. I am pretty sure it's because their router, (N
-
TS3297 How do I correct error #42110?
How can I correct an error message I keep receiving, #42110, when I attempt to watch a downloaded movie from the iTunes store? Any suggestions?
-
Unhandled Exception when launching Company Settings Center or UevSqmSession.exe
Hi there, using UE-V 2.0 we get some errors. Currently we're still evaluating and therefore only have 5 installations. 2 out of them do have unhandled exceptions thrown. I think UevSqmSession is starting by task scheduler: Application: UevSqmSession.
-
Can we be done loading driver and registering driver by Using 'new" Oper.
Dear Sir.. Can we directly create the instance of any driver class by using the "new" operator and by this object can we call any method like getConnection() etc,will it return connection instance. Is it necessary these all task from loading to regis
-
Hi, I have implemented Authentication for Weblogic 6.0 with the NTRealm solution. Nearly everything is working fine now.... If I add a new Windows user with admin rights, I can see this user in the Weblogic Console, I can define ACL's and I can authe