I need to reload...How do I do it?

I got a virus on my pc....need to reload...How do I do it?

Ladybug10
What version of Premiere Elements and what computer operating system is involved here?
Do you have your purchased serial number in hand?
If the version of Premiere Elements involved is Premiere Elements 9 or later, we can direct you to tryout installation files that you can download and insert your purchased serial number into.
Have you checked out http://www.adobe.com and, after your sign in there, the "My Products" category at the top right of the home page to determine if your version with your serial number are listed there.
We will be watching for your progress.
Thanks.
ATR

Similar Messages

My dad has dementia - does not remember his password. His hard drive has been erased. We need to reload Mountain Lion and can't figure out how to do it.

My dad has dementia - does not remember his password. His hard drive has been erased. We need to reload Mountain Lion and can't figure out how to do it. Internet recovery asks for his Apple ID and password. He has no idea. I have an Apple ID but have never bought anything through the iTunes store so it won't accept my Apple ID. I don't know if his computer is under warranty. He does not remember if he has Applecare. I tried reinstalling Leopard -- the computer originally came with Leopard -- but the computer screen goes grey and a message comes up saying I need to restart. He wants to give this computer to me since it's useless to him. What do I do to get a system on it again?

You will need to reformat the hard drive to go back to Snow Leopard or Leopard.
Does he have a Snow Leopard Disk? He should, as there is no way to go from Leopard to Mountain Lion without it. If you can find the Snow Leopard Disk, I'd at least start with that.
You will need to use Disk Utility in the installer to format the hard drive and get rid of the recovery partition.
Boot from the installer disk by holding down the C key on restart. When it boots, Open Disk Utility (Utilities menu, at least in Snow Leopard).
Select the Hard drive and then click the Partition tab.
Select 1 Partition from the partition menu.
Select Mac OS Extended (Journaled) as the format.
Name the drive (Macintosh HD is the standard).
Click Apply to partition the drive.
When it is done, quit Disk Utility and install the OS.

I need to know how to reload my copy of Adobe Photoshop Elements 11

i Need to know how to reload my copy of Adobe Photoshop Elements 11

if you're asking for the pse 11 installation file and if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
and activate with your serial number.
if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

I need to know how to reload Family Base to my daughter's phone... she deleted it... :-\

I need to know how to reload Family Base to my daughter's phone... she deleted it....
Any ideas would be appreciated!!

We'll make sure to walk you through the steps and get FamilyBase reloaded to her device SStone63! What phone make/model does she have?
AshleyS_VZW
Follow us on Twitter @VZWSupport

I need to reload system software on G5 tower but DVD drive is dead ...

My G5 tower won't boot. It hangs up just as the blue progress bar reaches all the way to the right. I'm sure I need to reload the system software, but the DVD drive is also on the fritz and I can't use it. I put an old G4 TiBook into target disc mode, hooked it up to the G5, held the option key down at startup and I was able to get the G5 to boot – so I'm sure the hard drive is not dead.
Any suggestions? How can I use an apple system DVD disc and reload the software? Is there another way? I looked at some old G4s I have lying around, thinking I would pull a drive out of there and use it, but it just looked too hard to do. Is there a way to use Carbon Copy Cloner? I have free firewire drive space. Can I just copy the system file from the G4 TiBook onto the G5?
Sorry, I can't tell you the OS, I think it's 10.4.?, but I forget!

reboot the G5 from the Ti target disk, slip the DVD in when you hit the desktop, tell it to reboot from the DVD - open the install OS X icon from the disc, enter pw & click restart.
another thing you might try is imaging the dvd to a firewire drive or partition on the Ti book... backup the tibook first if you resort to that.

No updates available for device and need to reload the software

after error JVM,
i need to reload n update the software.
but the desktop software prompts no upgrades available. how do i restore my blackberry 9810????

Hey brin79,
Welcome to the BlackBerry Support Community Forums.
In BlackBerry Desktop Software, click on Device>Update Software and then choose previous versions.
This will allow you to perform the reload.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

I need to reload software 513

i need to reload software 513

Follow the directions here:
KB19915 How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I need help reloading my OS

I have a blackberry desktop software on my PC and when I check for updates there was none,but it wasn't for update I was going for i just wanted to reload my OS,after checking for update a message popup and there was no update avalieble but "the dialog box of View other avalieble in the lower left corner did not appear" I did the same on storm "the dialog box appears" but it did not appear on my touch9800 OS6 boundle 695,please help me I really need to reload my OS
Solved!
Go to Solution.

Hello!
As a user-to-user volunteer-supported community, there is no commitment for when/if any post will be responded to. We try, but we as well are only human and also have lives to live. Further, many of us who volunteer a lot of time here are in the USA...and this past weekend (starting Thursday, earlier for some) was a major holiday period in the USA, rendering many of the volunteers busy with their lives and unable to post here. Hence, the delay in replying to your post is, while unfortunate, not unexpected. Of course, this solution has been posted perhaps thousands of times already...some searching of the site should certainly have revealed it to you sooner rather than awaiting a reply perhaps?
In any event...concerning your query -- at the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
http://us.blackberry.com/support/downloads/download_sites.jsp
You can bypass the Desktop Software for this and from a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try this procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Firefox hangs on opening requiring force quit I have snow leopard mac It hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise m

Firefox hangs on opening requiring force quit I have snow leopard Mac It even hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise me
== This happened ==
Every time Firefox opened
== I tried to update firefox add-ons ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Try a new profile. See [[Recovering important data from an old profile]]

HT1918 I need to know how to delete my credit card from account because I know longer have a credit. I just want to be able to up date my Apps but I can't now because there is a credit card on my account what do I need to delete it.

I need to know how to delete my credit card from account because I know longer have a credit. I just want to be able to up date my Apps but I can't now because there is a credit card on my account what do I need to delete it.

I need to know how to delete my credit card from account because I know longer have a credit. I just want to be able to up date my Apps but I can't now because there is a credit card on my account what do I need to delete it. Also my credit has expired so i need to delete it.

I have a 3g iphone and I need to know how to delete old photos from my phone!! I need the space but there is no way to delete the pictures!! Help!!!

I have a 3g iPhone and I need to know how to delete old photos. Need to free up space and there is no clear way to delete these photos!! Can someone please let me know how to get rid of these pictures!!!! Help!!!

There are a number of ways to delete pictures from the Camera Roll. One is to open Camera Roll in the thumbnail view, tap the arrow button (top right), tap all the pictures you want to delete, tap the Delete button ant the bottom. Photo Library pictures are deleted by unchecking Sync Photos on the Photos tab of your iTunes sync settings, followed by syncing your phone.

NI9203 - Need to know how to set up the FPGA code for multiple NI9203 modules and how to calibrate the data

Hi. I'm using the NI9203 module to detect pressure, temerature and flow rate of water in a cooling system. I have 17 different inputs coming in therefore i'm using 3 NI9203 modules. I've used the example provided with labview as a base for designing my code. The example can be found here : Program Files\National Instruments\LabVIEW 8.0\examples\CompactRIO\Module Specific\NI 9203.
I've had no problems when testing this code out for a single NI9203 module but when i add code for 3 modules the code will not compile as my resources are over mapped. Is there a simpler way to program the FPGA code.
That said how do you go about calibrating the data that's received from the module. Preferably i'd like to write a vi to do the calibrating. Just need help on how to go about writing this vi

Hi havok,
Firstly, I would use constants to configure the modules, it'll save some resources on the FPGA. I'm not typically changing the settings on the fly, so using constants whenever possible helps. I would also take a look at the following KnowledgeBase article on other changes you can make to the FPGA VI to compile the code:
http://digital.ni.com/public.nsf/allkb/311C18E2D635FA338625714700664816?OpenDocument
The best changes you can make are to use fewer arrays and front panel elements. This can be done by using a DMA FIFO or constants on the block diagram.
Now actually calibrating the data will require you to do it on the host side. There is an example VI called Binary to Nominal that changes the raw data to something more useful for datalogging, display, etc. It can be found in some of the example VIs, or in the following link:
http://digital.ni.com/public.nsf/allkb/E86D8D460C4C092F8625752F00050A61?OpenDocument

Help Needed - FusionFx Style - How do I remove the Dashboard Grey Box Section, so that Dashboard Background is Blank

Help Needed - FusionFx Style - How do I remove the Dashboard Grey Box Section, so that Dashboard Background is Blank
We like FusionFx Style but would like to keep the background white like blafp style.

Can you be a little more descriptive on what you need here and explain what exactly you want to be changed.

I need help understanding how the Apple components integrate to create a system across all my devices?

I need help understanding how the Apple components connect to create a whole system across all my devices?
Is there a resource that describes current system and associated functionality?
For example:
Buy A, B, C to achieve "X"
You will need:
an internet provider which supports <specs>
add D to achieve "Y"
You will need:
an internet provider which supports <specs>
add "E" to achieve "Z"
You will need:
an internet provider which supports <specs>
For example, I am looking at the Gen 6 Airport extreme. For intended performance do I need broadband? if so what are the specs, or will basic internet service suffice? Do I need the internet provider's modem or does the Airport extreme replace that? And then I think, if I am doing this, I should also look at Apple TV....What do I need and Why? Then I look at the New Desk top coming out in the fall, and I think well, if I wait and get this, what does this component do for the system, and what becomes redundant? What does this awesome desktop do for my ability to sit and use a new macbook air when I travel or sit on the couch in my PJs?
If there was a place that plainly stated "if you buy the new dektop you can configure a system including only these components and achieve <this result> and by adding <additional components> you will achieve this result.
I have been to the genius store a few times, but I come out of there more confused unless I have SPECIFIC questions or already know what to buy.
A "System Configuration App" would be a really great sales tool--Just saying.

I have no idea what "fully optimized" means.
No Apple device will let you watch broadcast TV. The Apple TV is a good option for watching streaming TV from iTunes, NetFlix and Hulu. If you want to watch from other sources, you may need to look at other devices.
Any Mac computer or iPad will allow you to surf the web.
What business software?
Time Capsule is a good option for back ups.
Update what across all devices?
For accessing documents from all devices, a service like Dropbox is your best bet.
I have no idea what "step as far away from an internet provider as possible" means. If you want Internet access, you need an Internet provider.
Lighting fast speed for what? Processor? The specs are listed for all devices in the Online Store. Internet? We're back to the service provider.
Technology changes. The only way to keep pace with it beyond a couple of years is to buy new stuff.
The bottom line is you need to look at the specs for devices availble and at your budget and decide what best meets your needs. If you are unable to do that on your own, there are lot of technology consultants out there who will, for a fee, look at your exact situation, make recommendations and even handle the purchase and set up. Perhaps that would be the best route for you.
Best of luck.

Need info on how to get the little pictures like Adobe website has next to the title of the page??

I know how to enter title text but i need to know how to get an image next to the title of the page please help??

http://alt-web.com/favicons.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

I need to reload...How do I do it?

Similar Messages

Maybe you are looking for