I need to reload software 513
i need to reload software 513
Follow the directions here:
KB19915 How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Hi, After 3x wrong password, device wipped and error on screen reload softwares 513 I have been searching an trying for hours now and all the steps described don't work - - installed version software and device - BUT no option available to update software in manager - when trying to connect to device, get always error message that software cannot communicate with BB can you please help! Thanks, Bram
Hi
You don't mention what version of the OS or DTM you are dealing with. We can deal with that after finding a solution to the new issue of the PC not recognising the BB.
Make sure that you are using a proper data cable, preferably the BB one which came with the device. Many cables - which look the same as a data cable - permit charging only.
Next, after confirming that the cable is satisfactory, ensure that you are using a known good USB port on the PC. Not all ports are connected to the board inside the computer.
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>> -
Error Message : Reload Software 513
I know various people are going to direct me to previous threads and topics about this, but i can assure you that ive checked and scoured the internet to no avail.
To cut a long story short, I plugged my Curve into the computer, it asked me for a device password, i didnt know what it was, i tried various things, and due to my stupidty i entered the wrong password 10 times and didnt take none of the warnings seriously. My phone then wiped itself and left me wit the message Reload Software 513
After searching for a solution for this, i didn't really have much luck. Mainly because the desktop manager i was using (v4.7) was different to the one other people had used and even different to the one a KPB was showing me on the solution centre bit.
I got off the phone to an 02 helpline who then tried to instruct me the same way this website had tried too. They think the problem is because i do not have the latest Desktop Manager V5 or something.
If anyone can talk me through what to do, or has any help, it would be greatly greatly appreciated
Solved!
Go to Solution.No, sorry, I don't know why I assumed you had an 8320 Curve.
I have edited my post above to the 8900 link and software.
Forget about the 8320... my mistake (though it would not have loaded to your 8900, so no worries there).
Download the OS. Find the downloaded *.exe file and double click on it to install it to you PC.
Follow the directions in the link... step by step.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hi my name is Jojo. I did something stupid today. I locked my keyboard on my phone and I used up all my attempts to open it and now it said to "Reload softwares 513". What do I do now or How do I do it? It is a Blackberry Curve 8330 Smartphone....Please help me...
Solved!
Go to Solution.Hi and Welcome to the Forums!
Here is a KB that discusses that error:
KB13003 "JVM 513" error appears on the BlackBerry smartphone
Hopefully it contains something useful!
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I've only had my blackberry curve 8900 for about 2 months, twice it has asked me to enter my password as usual but instead of them appearing as stars when i'm typing them it comes out in letters then whe i press enter is says.. type blackberry to continue even after following those instructions it wipes off everything.. this has happened twice and it's so inconvenient as most of you would know... but yesterday it did the same thing but the screen went white and the message 'Reload software 513' appeared with a line going across a circle with a box inside..... is this a fault or something that can be repaired easily????
Hi and Welcome to the Forums!
It sounds as if you are mis-typing your password -- and after the maximum number of allowed attempts, it automatically wipes the device clean (as a security precaution, on the assumption that you are not the "owner" of the device). What it also does, during the password retries, is to show you the password in clear text after some number of failed attempts.
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB00588&slic...
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB10385&slic...
As for the 513 error, here's a KB about that:
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB13003&slic...
Hope something there helps!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Curve 8900 - 'Reload Software 513'
My Son was given a Curve 8900 and has used it for months without any problems. Yesterday some of his friends messing about tried to access his phone and put in wrong pin number several times.
His phone is now showing a message 'Reload Software 513'
We have never syncrinised this phone with the internet, so not sure how we go about sorting out this problem, so any advise would be appreciated.
Thank you.Hello JaxT,
Perform a hard reset by removing the battery from the BlackBerry smartphone and reinserting it. For more information on this procedure, see KB02141.
If the error message persists, perform a reload or upgrade the BlackBerry Device Software. For more information on this procedure, see KB10144.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)! -
it asked me for my password and typed it in and it said in vaild password then type black berry it did that for 5 times then it said wipe memory then now it says reload software 513
Hi and Welcome to the Forums!
See this KB (along with the links within it):
KB13003 "JVM 513" error is displayed on the BlackBerry smartphone
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
my goshh i dont now what to do in my bb phone.whats goin on? pls help me.. if anyone knows about reloading 513 in 8900 bb phone
Hi lolzka145,
Welcome to the Suppport Forums!
You may need to start a software reload without the battery inserted then reinsert the battery after the software reload has started. See: http://bbry.lv/k9pwuZ
Unless you have a backup file you will not be able to restore your information.
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
Phone LOCKED showing "reload software 513"
I don't have the back up file and I can't unlock my phone!!! Ahhhhh
I have talked to two different people at tech support and still nothing. Is there a Superman or woman to save my day????Hi rickymassey,
Check out the following KB regarding the issue you are experiencing and how to resolve it:
http://www.blackberry.com/btsc/KB13003
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)! -
I need to reload system software on G5 tower but DVD drive is dead ...
My G5 tower won't boot. It hangs up just as the blue progress bar reaches all the way to the right. I'm sure I need to reload the system software, but the DVD drive is also on the fritz and I can't use it. I put an old G4 TiBook into target disc mode, hooked it up to the G5, held the option key down at startup and I was able to get the G5 to boot – so I'm sure the hard drive is not dead.
Any suggestions? How can I use an apple system DVD disc and reload the software? Is there another way? I looked at some old G4s I have lying around, thinking I would pull a drive out of there and use it, but it just looked too hard to do. Is there a way to use Carbon Copy Cloner? I have free firewire drive space. Can I just copy the system file from the G4 TiBook onto the G5?
Sorry, I can't tell you the OS, I think it's 10.4.?, but I forget!reboot the G5 from the Ti target disk, slip the DVD in when you hit the desktop, tell it to reboot from the DVD - open the install OS X icon from the disc, enter pw & click restart.
another thing you might try is imaging the dvd to a firewire drive or partition on the Ti book... backup the tibook first if you resort to that. -
No updates available for device and need to reload the software
after error JVM,
i need to reload n update the software.
but the desktop software prompts no upgrades available. how do i restore my blackberry 9810????Hey brin79,
Welcome to the BlackBerry Support Community Forums.
In BlackBerry Desktop Software, click on Device>Update Software and then choose previous versions.
This will allow you to perform the reload.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
BBCurve8520 : "Reload Software 552" URGENT!!! I need help now...
I 'm using BB curve 8520 now. Recently, I installed a couple of applications through BB App software on my device. I reboot my device after downloading apps but while restarting my device it stuck on "reload software 552" in the white screen. I removed and put it back my battery, same thing goes on. I don't know what to do. so, i tried to find solutions on google. i have tried application loader but it says "Desktop loader is unable to connect the device. you may need to enter the password on the device" after the status shown 100%. I don't even have a password on my device. I'm so confuse about what is happening to my device. I cant backup my data through BB desktop software because it says my device is disconnected (I'm still connecting my device with USB) no matter how many times i click on Retry, it says unable to connect the device. My Problem is how to connect my bb with my pc (even though i had connected my device with USB, it didnt seem to work) and how to solve the "reload software 552" (Really need help D. Anyone could help me to solve this problem? Thanks.
Additional Information:
Thats what it says whenever i try to connect my bb.
I cant connect my device. Help... -
Do I need to reload all software to convert to Maverick?
Do I need to reload all software to convert to Maverick?
No, Mavericks will install over your existing system leaving all of your apps, settings and files intact. if you're upgrading from Snow Leopard you might find some of your apps no longer work though. You might want to check the compatibility table befire you get any surprises http://roaringapps.com/apps?index=a
-
My hard drive crashed and I need to reload my CS6 software. Where can I find a download link?
My hard drive crashed on my desktop. I need to reload my CS6 software. Where can I find a download link? I use to be able to download it at work . . . I work at FedEx Office.
Thanks,
AudreyYou can download the trial from the Adobe site https://www.adobe.com/products/cs6.html and activate it with your serial number.
Alternatively you can download it directly (without any download manager) from http://prodesigntools.com/adobe-cs6-direct-download-links.html - make sure you follow the Very Important Instructions before proceeding to the download. -
Hello, I have iMac Itel i3, from Oct, 2010 and have OS 10.6.7 and multiple users.
About 3-4 days ago the Mail icon in dock had question mark and was accidently removed, along with program on my user. Oops.
1. Mail 4.4 is on other users and works fine, but for me it does not work and tells me V4.3 does not work with latest OS X.
2. I reloaded software from my user with original disks (Oct, 2010) and got Mail 4.3 again. Mail 4.3 did not work with latest OS. I am unable to load Mail. Gives Yellow error message.
" You have Mail version 4.3 (1081/1084). It can’t be used on Mac OS X Version 10.6.7 (Build 10J869). For more information, click the Help button."
3. Tried to update software and look for update for mail 4.3 on Apple site to no success.
Hate to go to MS-Entorage ( I may need to learn something new and alien) mail program since contracts are in Mail/Address Book.
Ideas?
MattDeedsMatt,
I would download and run the 10.6.7 combo update.
http://support.apple.com/kb/DL1361
Regards,
Captfred
Maybe you are looking for
-
Getting integer values from a JTable
Hello The table's cells contain integer values. I would like to save each one of theme them in an array of integers. The problem is, I don't know how to do so. I tried to use the getValueAt method, but I always get error messages. I tried something l
-
Why do hyperlinks created in a Pages document, drop out when I convert the doc to a PDF?
-
Some of my highlights are working but others aren't.
I am very new to encore and have been picking up little bits here and there from online tutorials. I have created my own menu using Photoshop CC with rectangle highlights using the (=1) and layer titles. When I have opened the menu in Encore, 3 of my
-
Unable to move Finder between Spaces in Mission Control
This problem has been plaguing me for several months now even before I upgraded to Mountain Lion from Lion. And for some reason I just can't seem to move the Finder (and some other apps) between indvidual spaces in Mission Control. Even worse, when I
-
I just recovered lost iphone but forgot passcode to lock screen how do i get in
how do i unlock screen if i forgot pass code