I need to render a audio in a project on my notebook but don't work.

Please help me.

There is a link to After Effects Basics on the home page of this forum. You will have to go through at least the minimum three tutorials found under that link to figure out how to use After Effects. If you have a hardware problem we need to know all information about your project and your computer because there are millions of variables and a guess is useless.
Follow this link to get started: AE Basics

Similar Messages

Need to render everytime I re-open project in PP3

My problem:
On a particular project, I need to re-render everything everytime I re-open project even after I have saved and closed project.
I also experience SERIOUS ERROR crashes or simply PP3 freezes while trying to render whole timeline, I need to render in chunks.
The project file is a single timeline 2:45 minutes long with only the clip on timeline in project; it's CFHD low res clips (not corrupted) and there's quite a lot of CF cross-fades in timeline (it's a trailer) with about 5-6 clip color corrected that need to be rendered.
My specs are:
PP3 + AspectHD v5.2 build 105
dualmonitors with Ultramon 2.6
AMD ATHLON x2 4600+
4 GB SDRAM2 733 Mghz (dual channels)
MATROX APVe
ASUS SLI-DELUXE
Sound Blaster X-FI

Hello Frederic,
I am having the same issue. I am also using AspectHD v5.2. The timeline which I am having this issue has many effects and also has some imported Photoshop files. Another aspect of this is that when I try and play the timeline the play-head jumps to the end of the timeline. If I render the clip it plays fine. Except when I exit Premiere and then open it again the renders are lost and I'm back at square #1. I have been struggling with this since November and am not sure how to fix it. I know you were hoping for an answer (as am I) but thought I would just chime in to let you know someone else is also having this issue --- for what it's worth...

Audio output changed to 'Digital Out' and speakers don't work! Please help!

I'm not exactly sure what's happened, but after starting up my macbook pro, my speakers/audio haven't worked.
The volume control in the menu bar is inactive (looks light grey) and in the Sound menu, I have no option for output devices except for 'Digital Out' - there is no other option for 'external speakers' (as per usual) or anything!
I can plug earphones in, and sound comes out fine... I don't know what may have happened, but I'm really worried - I use my MBP for home & work; I need my speakers to work!!
If anyone can offer any advice, I'd be really grateful. Thank you in advance.

Talked to Tech Support about this when my machine locked up in this same fashion. There's a little "door" inside the headphone jack that can get stuck in the open position and keep the audio from switching back to the internal speakers / stuck in the digital (optical) output position...
The solution: the iPick... It's a toothpick, but if you use it to poke around inside the headphone jack until the little door gets unstuck, it becomes an iPick, and a box of them are very expensive, but they come in lovely colors and are very intuitive to use...
I'm not kidding... Stick a toothpick (or other non-conductive small stick) in the headphone jack and joog it around until it releases the little door...

I need to migrate CUCM 8.6.2 from 6.0.1 but don't have any DVD of old 6.0.1

Dear Experts,
I have new project which has been abandon for long and assigned to me recently.
I know what is the steps we need to work.
1. DRS from current CUCM version
2. Install same version of 6.0.1 to new Server
3. Backup from step1.
4. Upgrade to 8.6.2(it is not direct support, so I have to upgrade to middle version first)
But customer doesn't have current CUCM(6.0.1) version of DVD and I cannot find the version from Cisco site as well.
1. Can I export BAT from old version and import BAT to new version ? will it work ?
2. I don't have any bootable version either of old or new, so I need to make bootable after download from Cisco site.
I googled and some site said I can copy bootsector from bootable DVD and copy to new DVD, in this case even though it is not same version, for example, if I copy from 10.5 version and copy to 8.6.2, does it make bootable DVD ?
3. How can I remove all configuration on CUCM ? is it CLI command if I can ?
Thanks in advance
Jason

Hi Jason,
There is a way, however if you got into any bad situation or needed any help during the process TAC WILL NOT be able help.
http://htluo.blogspot.com/2010/04/how-to-make-non-bootable-iso-image.html
Try this method, and you should be able to create bootable DVDs from non-Bootable ones.
Secondly, you may raise a TAC SR and request them to release the Bootable media for 6.0.1
HTH

HT2305 i have just bought a iphone 5 and am trying to back my 4 up so i can transfer everytghing on to my 5. it has said i need to update my itunes which i have tryed to do but still isnt working any help please

i have just upgraded my iphone 4 to a 5. and was trying to back my 4 up on the computure so i could get all my pics and music on to my 5. but its saying i need to update my itunes which i have tried to do and is still not working any help please i have been trying for hours

how is it not working?
what version of itunes?
what ios on iphone4?
does it give an error msg?

I need help a Red Cross when I send a instant message but Internet still works?

Well I topped up not that long ago and when I have tried to send a instant message it comes up with a red cross but my Internet still works? I need it to work it's urgent

Hi and Welcome to the Community!
BBM, SMS, or some other service please? The exact service you are having trouble with will likely have a completely different resolution path from the others...
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I need help turning off the "find phone" on my 4G iPhone, but don't have the phone to get the serial number

I am looking for direction on how to turn "OFF" find my phone. I do not have the phone or serial number.

Remove it from your account by signing in to icloud.com/find,
selecting the device, and clicking Erase. When the device has been
erased, click Remove from Account.
You do not need the serial number to do this, but you may
be able to find the serial number here:
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
Scroll down to the section on getting information from your computer.

I need help with facetime it says I have a network problem but safari is working how do I fix it?

I was using a computer at work to charge my ipod touch and it deleted all my songs. I went to reconnect it to my computer and now facetime and facebook apps will not work but safari and other apps are..please help.

http://iforgot.apple.com Is not working...
When i try to reset password by e-mail, i never receive the e-mail with link to reset password.
If i Try to answer the security question, it says the answer is not correct.
Sorry for my English.
Help me please!

Do I need to Render every time I make a to the audio or video?

Today is the first time I have seriously considered using Final Cut Pro. This software was purchased for me (without my knowing) by the company I am working for to be used for simple editing and exporting. Recently I have been using iMovie and have been creating adequate videos, but figured it is time to upgrade to a "pro" software. That has been a big mistake.
It seems like every time I make a change to the subclip in the timeline I need to Render the movie; if not, additions like transitions, audio filters, or simple changes are unplayable. For instance, when I adjust an audio filter (hum remover, for example) and try to preview the movie in the canvas, all I see is video accompanied by an annoying beeping sounding. Once I render the movie, I can I finally hear the expected audio.
I am convinced I am doing something wrong, but I haven't noticed my mistakes in the help sections. Do I need to Render the audio/video every time I want to make a change and preview said change? Can someone point me in the right direction?

#28 Having to render every clip in the timeline
Shane's Stock Answer #28: When I put a clip in the timline, I have to render it before it will play. Why?
Your clip settings MUST match your timeline settings. If you have DV/NTSC material, you need a DV/NTSC timeline. The frame rate, audio rate and dimensions (4:3, 16:9) all need to match exactly. In Final Cut Pro 6, this is easy, because when you drop a clip into the timeline, it asks if you want to set up the timeline to match the settings of the first clip you drag into it. Click YES and you are ready to go.
However, in FCP 5.1 and earlier, it is a bit trickier.
The most important thing you need to do is properly set up your project from the start, and the best way to do this is to choose a setting from the Easy Setups, located under the Final Cut Pro menu.
Once you do this, you’ll need to create a new sequence. This is because the sequence that is already in your new project is setup for the typical default setting of DV/NTSC, or for the settings of your last project, which might not match what you are currently working with. So delete SEQUENCE 1 and create a new sequence:
This new sequence will contain the settings you chose in the Easy Setup menu, and should match the format you captured.
Shane

OT: What viewers do you need to use ALL audio and video files?

I had a lot of trouble with audio and video files on my PC. I
now have a
MacBook Pro, which is a big improvement. But I still
frequently
encounter files that I can't use. I try to open them, but
Apple doesn't
know what to do with them. For example, I often encounter
unusable
videos while perusing news websites. I also have some audio
files with
.mva or .mvw extensions that don't work.
So what viwers/players do I need to download in order to be
able to play
every audio/video file that comes my way? iTunes handles .mp3
files, and
I also have QuickTime installed. I just viewed another video
after I
installed a Flash plugin. What else do I need to install?
Thanks.
www.geobop.org - Family Websites
www.invisible-republic.org - Adult political websites (Mature
adults only)

VLC is a big favorite
http://www.macupdate.com/app/mac/5758/vlc-media-player

I need adobe reader but don't know which one to download to my new Mac Pro with retina?

I need help...I need to download adobe reader for my banking and such. But don't know how to do it let alone what one I should choose. Could someone please help me. Thank you bunches

You download from the Adobe website. Follow the step by step instructions. Any questions post in the Adobe forums since it's their product.

Always need to render audio on clip import

Hi,
I use Streamclip or to convert my AVI files (from a digital camera) to DV so I don't have to render immediately on import. All works ok with the video, but I always need to render audio on import. Does anyone have any suggestions as to what settings to use on Streamclip and / or FCE?
Thanks,
g

Do not convert to DV. Convert to QuickTime using the DV codec. The export to DV setting in Streamclip is for DV Stream and is used only by iMovie.

Needing to render PAL-DV in FCP????

Hi,
I had my Sony PC109 stolen and bought a Sony HC26 to replace it temporarily.
Have started to import from it though in FCP and even though both capture settings and sequence settings are DV-PAL 48 KHz, I still have to render straight, unaltered video with effects or anything.
I checked on the camera to make sure it wasn't recording in wide 9:16 mode or anything and it is in standard 4:3.
Basically, whenever I put anything in the timeline, it has a big red line above it indicating I need to render the video. (the audio is fine)
If anyone could help I'd really appreciate it.
Thanks,
Crazy

Go to the FINAL CUT PRO Menu and choose EASY SETUP. Choose the DV/PAL option.
Delete Sequence 1. Or any other sequence you have in the Browser. These will have the OLD settings...the ones in place BEFORE you chose the proper Easy Setup.
Create a new sequence. This sequence will have the new settings and should work just fine with your DV/PAL footage.
Shane

Do I need to render after finished editing in FCE?

I'm finishing my very first FCEHD3.5 project (the whole audio & video editing part). DO I HAVE TO RENDER ANYTHING befor recording to the camera, using the method that you described?
(I used some photos in my project and they look "funny" while played from the timeline and watched in the canvas; photos are funny in terms of flickering, moving pixels along edges of objects, etc. - would any rendering help with this?).
And, in general - what about the rendering? -(this is my 1st project, so I have no experience there)Do I need to render anything? Or should I just print to camera, and find a way to burn the project in iDVD..?
MacBook Pro 17 inch Mac OS X (10.4.7) 2GB RAM, 100GB7200HD, Super Drive, FCEHD3.5, PanasonicPVGS500, G-Raid ExtHD320GB

The easiest way to do this is, first make sure you don't have any clips at all selected in the timeline, then just do the Render All > Video and the Render Only > Mixdown. FCE will take care of things from there.
The length of time it takes to render the video depends on a whole lot of factors ranging from what kinds of effects/generators you used in your clips, how many there are, how long they are, whether or not any are already rendered, etc. plus all the hardware specs/capabilites of your Mac ... all of which makes it really hard to estimate how much time it will take.
Mixdown audio takes all your audio tracks and builds an 'audio render' file that contains 1 stereo pair resulting from all your audio tracks. It goes a lot faster than rendering video does ... and btw helps reduce/eliminate problems with dropped frames.
Your MacBookPro has great specs, you should find this goes pretty well, but I still really can't estimate your render time. Take a look at your timeline - over how much of it does the red 'needs rendering' indicator line show? That would give you some indication - at least short vs. long.
Good luck!

Forced to render same audio every time I export

My source material is all synced with audio in 8 timelines ranging from 45 min to 4 hours and I am editing from those, nesting into new working timelines. These original sequences need to be rerendered nearly every time I am working, even though I haven't made any changes.
If I try to export from a new timeline that includes bits of these nested sequences, the audio render gets held up indefinitely. It seems that to export any small clip, I need to open up all the original source timelines and rerender their audio individually, then render the working sequence. This takes up a huge amount of time and is really killing me.
Does anyone have any ideas why I would need to continually render the audio from these original sequences even though I am not making changes, or have any ideas of somework around?
Please let me know what else I can tell you!

Thank you for your reply regardless!!!
I found a years old thread that had a similar problem and the initial writer said he fixed it by unchecking the "save media cache files next to originals when possible" option in media preferences (although subsequent visitors to the thread were not helped by this fix). I did check that otion when setting up the project so I decided it's worth a try and I have today and tomorrow as buffer if all goes wrong. I unchecked it and changed the path for my media cache files and database. I waited through reconforming and had to render my avchd files again. The very weird thing is now the program is acting like all my MXF footage needs to be rendered when it never has been neccessary before. Do you have any idea about that?
I still don't know if changing the media cache location and unchecking that option will solve my originial problem, but we'll see; it's the only potential I've found!

I need to render a audio in a project on my notebook but don't work.

Similar Messages

Maybe you are looking for