I need to replace the HD on a p7-1206 with a SSD

I need to replace the 2TB system hard drive in a Pavilion p7-1206 with a 120GB SSD. What is the best procedure for transferring the Win 7 OS to the much smaller SSD? I created the recovery disc set. After starting the Recovery Discs to install the OS on the SSD an error message said that SSD capacity was less than the original disc and stopped the install process. Do I need a procedure that will reproduce all 4 partitions on the SSD in working order or can some partitions be ignored?
Thanks for your help.
This question was solved.
View Solution.

MusicCity wrote:
 ...  Do I need a procedure that will reproduce all 4 partitions on the SSD in working order or can some partitions be ignored?
Thanks for your help.
Hi,
No, this also won't work. Hope the following tutorial helps:
   http://www.overclockers.com/forums/showthread.php?t=670079
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Can you replace the HD in a macbook pro with a SSD?

    I recently got a new macbook pro 17" 2.2ghz i7 with 720gb SATA HD and was wondering if it would be easy enough (considering it is only a SATA) to replace the current SATA with like a 256GB solid-state drive (SSD), or if its only designed to work with a SATA HD and i'm s.o.l.??

    Yes it works great doesn't it.  I replaced mine the day I got it.  I purchased the parts first and then bought the mac.  I got 2 intel 320's 600gb hard drives.  I purchased an optibay and then put both of the hard drives in the macbook pro and then did a raid 0, so now I have 1.2tb of space.  I also purchased 16gb of memory for it, so that couple with the quad-core i7 2.3Ghz processor it's blazing fast, it starts up in 7 seconds.  I love it.

  • My iphone 4s is over 2 years old and I need to replace the battery. How much will this cost at an Apple store?

    I have an iphone 4s that is  over 2 years old. The phone's battery is no longer able to hold a  charge for an acceptable length of time.  Assuming I need to replace the battery, how much will this cost at an Apple store?

    graciebethgrant wrote:
    Basically, I'm new to Apple, despite using them before, but I've never actually owned my own.
    Since buying this phone off a colleague at work, I seem to be having problems with it. First, I noticed how rubbish the battery life is, then my charger almost went up in flames and thirdly my camera lense is scratched beyond belief.
    I know the phone isn't within warranty, although I was lead to believe it was before and during buying it, so basically I'm extremely disappointed with the general make up of iPhone's considering they cost such a **** of a lot of money, you'd think they'd be built to last.
    Back to my main point, how much would it cost for a new battery? Or a new camera lense if anyone can help me with that? (I know that the back of the phone was refurbished just before my buying it, so literally just the camera lense)
    Thanks!
    So basically it sounds like you bought an abused used iPhone and somehow that makes the phone subpar because dispite the abuse it should still last forever and look like new? Batteries don't last forever, even under ideal conditions, so your expectatoins are unrealistic. Take it in and have an estimate done.

  • Hi, i have a new number and I'm trying to activate iMessage but i can't.  it is only saying waiting for activation,  i have tried a lot of times with not success.  i'm not sure if i need to replace the old one to this new one, or what do do. can you help

    Hi, i have a new number and I'm trying to activate iMessage but i can't.  it is only saying waiting for activation,  i have tried a lot of times with not success.  i'm not sure if i need to replace the old one to this new one, or what do do. can you help

    Troubleshooting iMessage activation:
    http://support.apple.com/kb/TS4268

  • I I have a late 2005 power PC G5 that I want to bring back to life.  I need to replace the original hard drive, a Maxtor 250 GB Sata.  Can I replace it with modern drives, SATA 5-6 etc?

    I have a late 2005 power PC G5 that I want to bring back to life.  I need to replace the original hard drive, a Maxtor 250 GB Sata.  Can I replace it with modern drives, SATA 5-6 etc?

    I knew I should never get rid of my old G5's.  By the way, there is a browser still supported for the PPC, TenFourFox, if you're not using it already.  Go to the Floodgap website (they author it)  download it for free.  The only thing it doesn't support is the Flash plugin, but the browser works great. Other video types are supported.  It's based on Firefox, and runs most of the plugins and add-ons. It's very fast, and beats all other browsers on the browser compatibility and speed test.  That's now my default on my G5's.  Firefox and Safari are no longer supported.  As far as the OS, both Tiger and Leopard were solid for me.  The reason, as I stated before, was iMovie.  The version in Tiger with iLife was far superior to what Apple changed it to.  They 'dumbed it down' for the masses.  Even the newest iLife 11 on my Mac Pro quad isn't is good, in my opinion.  So Leopard should be fine for you.  It's a much larger browser in terms of sheer megabytes and disk space, but it's fine.  As far as getting an OS disc, I'm seeing Tiger for about $45.00, Leopard for $50 - 60.00 on that famous auction site.  As far as RAM, I have 8GB in my G5 2.3, but you should check Activity Monitor when you are running your apps.  See how much green slice you have left (unused RAM).  You might find you don't need eight.  A Mac Pro will grab more free RAM than a PPC machine will.  I have a hard time maxing out use of my 8 on the PPC.  Not true with the eight on my Mac Pro.  The OS doesn't hesitate to grab and use it.  You might be OK with 6GB on your PPC. More will not make you faster, as long as you still have free RAM available.  As far as backup on your resurrected machine:  look for a firewire enabled backup if can.  Use CCC (Carbon Copy Cloner) and make a clone backup.  Next time your PPC machine wipes out the hard drive, just take your Firewire drive and plug it into another PPC machine, and you can select it as your boot drive. You'll be back and running in five minutes.  You can also take the physical drive out of your enclosure, and put it in your tower to replace the failed drive, and you'll be back to where you were in less than ten minutes, OS and all.  The PowerMac has an 800 port, so you can do the 800 on the machine to an 800 port on your backup. A firewire 800 to 800 cable is only about $8.00.  It runs nice and fast through the 800 port.  I like the OWC Mercury Extreme enclosures.  They use USB, Firewire 800, and eSATA, so all your options are open.

  • I need to replace the 30 pin connector on an ipod mobile speaker. Any suggestions where I might obtain one

    I need to replace the 30 pin connector on an ipod mobile speaker. Any suggestions where I might obtain one?

    How about contacting the manufacturer of the speaker?

  • I have a HP G71 Model#G71-329WM. I need to replace the optical drive. What is the part Number?

    My HP G71 Model#G71-329WM will not load a CD or DVD so I need to replace the optical drive. What is the correct Part number? Thanks
    This question was solved.
    View Solution.

    Hi:
    Below is the link to the service manual for your notebook.
    http://h10032.www1.hp.com/ctg/Manual/c01713747.pdf
    Replacement optical drives with HP part numbers can be found in Chapter 3, page 33.
    You can also read the instructions in chapter 4 on removing the drive and getting the part number off of it which will be normally found on a white sticker.  A 6 digit-3 digit part number (123456-001)
    You can search by the part number on eBay for a used but working device or you can probably buy one new from HP by entering the part number at the link below.
    http://h20141.www2.hp.com/hpparts/Default.aspx?mscssid=6287767FBDD34F3696CF3D0837BDBC96
    Paul

  • USB port....need to replace the motherboard or whatever holds the USB in place

    the USB port on the lower R side of my hp pavillion dv1000 notebook pc....when I try to plug something into the USB port, the port goes in.  I need to replace the USB port. I don't know if it can be fixed or if I have to replace a motherboard or sisterboard or whatever the USB port is connected to. Any ideas or advice and how hard is it to fix it. I don't want to get rid of the laptop because it still works great. I can burn and play cds and dvds on it. I can use the WIFI to access my email. Other than the USB port connection needing repair...it runs great. Please advise or help. Since it's out of warrantee since 2007(purchased in 2004) hp will not give me any support or tell me what part I need to replace etc... And it would cost more to send it out to fix....around 400 or 500.  So I want to get the part and have my friend put it in. Please advise/help.
    Angie

    Post your full model number and I will see if it is a replaceable part.
    http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&lc=en&dlc=en&cc=us&docname=bph0...

  • HT1490 After how many charging cycles do I need to replace the baterie

    After how many charging cycles do I need to replace the baterie

    Please see below my system overview
    MacBook Pro
    13-inch, Mid 2010
    Processor  2.4 GHz Intel Core 2 Duo
    Memory  4 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 320M 256 MB
    Serial Number  730504Z5ATM
    Software  Mac OS X Lion 10.7.3 (11D50b)

  • How do i know if I need to replace the battery in my MacBook Pro?

    How do i know if I need to replace the battery in my MacBook Pro?

    There are a few ways (none of which are covered in the above link). On more recent OS X versions, when you click the battery icon in the menu bar you may see a "Service Battery" or "Replace Now" message. If you aren't seeing that, the system probably thinks the battery is fine.
    Also, in your System Information utility, there is a Power section that provides Health information for the battery, with a Condition status and Cycle Count. If the Condition is Normal and your battery is under 300 cycles (for removable batteries) or 1000 cycles (for non-removable batteries) it is not time to replace it yet.
    But of course, the other time to replace it is if you don't think you're getting the runtime you want out of it.
    If none of those is a problem, don't worry about it.

  • I need to replace the nano SIM card tray of my brand new Ipad Air, but here in Brazil it has been impossible...How can I contact the US apple store through email to help me?

    I need to replace the nano card SIM  TRAY of my brand new IPad air, but here in Brazil it has been impossible...How can I contact the US apple support through email, to help me?

    Visit an ASP or dealer

  • I have a IPOD classic late 2009 160gb ... Only my play/pause buttons doesn't work ? Do I need to replace the click wheel ?

    I have a IPOD classic late 2009 160gb ... Only my play/pause buttons doesn't work ? Do I need to replace the click wheel ?
    May try DIY due to cost
    Just wondering if anyone's had this fixed how much it costs
    Or if it's another problem before I order parts

    I have found the solution for myself for the above.  I use a specific scripting program which is accessed by Control A. To pause it, you need to use Control B. not sure if this would work for any other application but it resolves my dilemma after hours of trying!

  • Powe Mac G5 early 2004 gives error (no memory installed) Do I need to replace the Logic Board. Machine powers up,2beeps and power lights blinks 2 times and stops there, No video or any thing?

    I just recently aquired a Power Mac G5 early 2004.
    When I power the system up. I get 2 beeps
    and the small front panel light blinks 2 times continuously.
    The error codes show that it means a memory problem or
    no memory present. Memory is installed.
    In this case do I need to replace the mother board.
    The system goes no futher, no video or any thing.

    Well, it's possible that someone pulled the original RAM from the computer before they sold it, and repalced it with incompatible RAM. That, believe it of not, would be the best of all world in this case, as a working G5 logic board and its installation could cost as much as a refurbed Intel mac.
    I would contact the seller if you did not personally see the computer working before you bought it.
    As the computer had to be moved about--possibly shipped--to change hands, first check that all internal cards and RAM Modules are fully seated. They can work loose in some models.

  • How much money needed to replace the iphone ?

    Hello all,
    I have a iPhone 4s with greyed out problem. My phone had a water damage but it did not cause anything on the phone. However, 2 weeks ago my wifi just greyed out. I cannot use wifi anymore. What I am wondering is, how much money do I need to replace the phone ? I saw 150€ and 150$ to replace. I suppose Apple gives the "0" phone to customers after the payment but I want to be sure on the amount of the money ? Does anyone has an idea on that ?
    Thank you.

    We are all fellow users on here and not Apple employees so cannot speak for Apple or what they will do.  That said, I would be very surprised if a US Apple store would be willing to do any replacement for this iPhone as it is not a US version.  Your friend can certainly visit an Apple store genius bar and see what they will do, there is no harm is asking.
    A new one will still have the problems I noted above, no warranty outside the US, LTE service will be for the US frequencies, locked to a US carrier unless you pay the premium price for a factory unlocked iPhone, on the order of $600.

  • Hello, I am having a macbook air early 2008 and it is having a hard drive failure i need to replace the hard drive is it possible ? the hard drive number is HS082HB

    Hello, I am having a macbook air early 2008 and it is having a hard drive failure i need to replace the hard drive is it possible ? the hard drive number is HS082HB could you please help !!

    You can replace it with a solid state drive, see the one OWC sells here.  The video on how to install it is here.
    iFixit.com has used hard drives available here.
    If it were me, I'd go with a solid state drive, as the prices have come down recently and the performance improvement is noticeable.

Maybe you are looking for

  • Sort by file name

    I'm loading from negatives, all in random order, so I do not have valid time stamps on the Windows files.  I've renamed the file to put them in order.  Why can't I get Organizer to load them by name?  Once I fix and rotate the files why can't I see t

  • I have hp g series its spyker not working properly pls give me any solution

    i have hp pavilion g series. i was listening music first its left spesker turn off and after its both speaker turn off. i have cheaked all settings the all settings are correct pls give me any sollution.

  • Application hangs for non existing value

    Hi, At the DB level I tried to query non existing value from the table, query came out with "no rows selected" . But when I try to do the same from front end, application hangs! I just checked in the statspack report it shows like query is taking mor

  • Instantiating a custom class through a string

    I asked yesterday how to call a function from an XML file, and I figured out how to make that work using the string-to-function call. so in my XML file I have <ITEM CALLBACK="ContactsList">View All</ITEM>, and my TextMenu class parses the XML file an

  • Can't buy from app store on iMac.

    I can't buy from app store on iMac. error messege: There was an error in the App Store. Please try again later. (100)                          Contact iTunes Store Support to complete this transaction. I re-start app store & iMac - didn't help. Delet