I need to restart my iPhone 4s almost every day. Settings app unresponsive

Moved here:
https://discussions.apple.com/thread/3593901
Sorry, I can't figure out how to delete a discussion.

Use iTunes on computer to Restore the iPhone Firmware. When the Restore is complete and iTunes asks, Set Up iPhone as New.

Similar Messages

Email on my iphone 3 stops working almost every day.

My email stops working on my iphone 3 almost every day, and I have to reset the passwords, power on and off. Then it works again. Any suggestions?

Then you didn't read it carefully enough. Here is the applicable part of that page:
If you're running software update 1.1.3, please note that tapping the 'Gmail' button will automatically configure Gmail IMAP. Here's how to set up POP:
Tap Mail from your iPhone's Home screen.
Tap Other.
Select POP from the tab menu.
Enter your name, email address, and password in the appropriate fields. The Address field should be your full email address ([email protected]). Google Apps users, enter your full address in the format 'username@your_domain.com.'
Under Incoming Mail Server, fill in the Host Name field as 'pop.gmail.com.' Google Apps users, enter the server names provided, don't add your domain name in this step.
Under Outgoing Mail Server (SMTP), fill in the Host Name field as 'smtp.gmail.com.'
Tap Save. Now you're done!
If you notice that POP access isn't working properly, please ensure that all your settings are correct by following these instructions:
From the Home menu, tap Settings.
Select your Gmail address.
Scroll to the bottom of the page and tap Advanced.
Ensure that your settings are as follows:
Incoming Uses SSL: ON
Outgoing Uses SSL: ON
Authentication: Password
If you're accessing your Gmail from multiple POP clients, we recommend setting Use Recent Mode to ON.

My iPad WiFi Almost Every Day Keeps Disconnecting, especially if I am watching a video online. How do I fix this?

My iPad WiFi Almost Every Day Keeps Disconnecting, especially if I am watching a video online. How do I fix this?

Howdy Danny_98,
Here is a great article to help troubleshoot wifi connectivity with your iOS device. Named iOS: Troubleshooting Wi-Fi networks and connections it can be found here: http://support.apple.com/kb/ts1398.
Be sure that you are in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap > and Forget this Network. Try to connect to your desired Wi-Fi network again.
Note: You will need to enter your Wi-Fi password again if your desired network requires one.
Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
Those are the basic troubleshooting steps and there is another section toward the bottom named Wi-Fi disconnects, or signal strength is less than expected that is very relevant as well.
Regards,
Sterling

Have to "Set up Bluetooth Device" for wireless trackpad and keyboard almost every day

Almost every day when I turn on my MacBook Air in my home office, my Apple wireless keyboard and trackpad do not automatically reconnect. They used to connect just fine when I was in the viscinity, but now (for the past 6 months or so) I almost always have to:
Bluetooth > Set up Bluetooth Device
Turn off the keyboard (hold down the power button for several seconds)
Turn the keyboard back on (hold down power button for several seconds)
Go through the setup wizard
Repeat for the trackpad
Things that don't work:
Pressing the button on each Bluetooth device
Restarting each Bluetooth device
Turning Bluetooth on and off
Setting the Bluetooth devices as "Favorites"
Selecting the device from the Bluetooth menu item and clicking "Connect"
Rebooting my MacBook Air
Resetting the NVRAM / PRAM
Once the device is connected for the day, I do appear to be able to "Disconnect" and then "Connect" again from the Bluetooth menu item. The devices will also automatically reconnect by pressing a button on them. It just appears to lose the "lease" on them or whatever after a little less than a day.
I'm trying to think of other troubleshooting steps I could take and it just occurred to me that I could try swapping them with the peripherals I use at work (which are possibly newer models, but otherwise identical). Any other suggestions?

Huzzah! Less than 1 week after finally getting fed up and posting this question, I have discovered the root cause - my wife had been inadvertently stealing my keyboard and mouse connection whenever she turned on her laptop! She's using my hand-me-down MacBook Pro which I thought I had reset, but apparently it remembered its Bluetooth connections.
I had suspected something similar since I occasionally used the wireless keyboard with my iPad, but had already ruled that out.
I can't believe I figured this out after 6 months of mild frustration, but just days after posting this question

Why is my Macbook Pro Retina freezing almost every day since I have installed Mavericks?

I bought my Macbook Pro Retina in March and only use it lightly for school. I don't do anything crazy on it, and I have used barely any space on it. I have never had any problems in terms of freezing, but ever since I installed Mavericks, it's been freezing almost every day. Is there any way to stop this? It's very frustrating because I will be in the middle of something and it will just stop working. The only way to stop the freezing is to hold down the power button until it shuts down. By the time I restart it, I've lost my work. I wouldn't mind reverting back to Mountain Lion, if it's possible, because I never had any problems with it. But if I can fix it without reverting to Mountain Lion, that would be preferable. Any help would be greatly appreciated, thanks!

Lots of people have this problem too but no one has a reply, any suggestions??

I have CS2 and I use it almost every day.. Today when I tried to launch it, a prompt came up saying my Activation was no longer valid and it closed automatically. Then when I tried to re-open it, a prompt came up saying "A serious error has occured" Ple

I have CS2 and I use it almost every day.. Today when I tried to launch it, a prompt came up saying my Activation was no longer valid and it closed automatically. Then when I tried to re-open it, a prompt came up saying "A serious error has occured" Please re-install the software... I have no idea where my software is... That was many many years ago? HELP!!

When you go to the download page, you must do two things:
Download this file: PhSp_CS2_English.exe on the download page.
Use the serial number on the download page in order to install your non-activation copy.
Do not use your old CD or serial number. It no longer works.
If you have Windows 7, the advice is to turn off UAC and run the installer as Administrator.
Gene

Why does new Safari screen appear almost every day?

Almost every day, I get a screen welcoming me to Safari, as if I had never used Safari before. This has been going on for about a week. In each case, I reset the settings, but the next day a new "Welcome" screen appears.

Leonard --
This happened to me, and I started paying really close attention to what I was doing . . .. I found that, being used to a wired Apple mouse, I got into the habit of tapping on the top of the mouse while waiting for the page to change. This sets off Zoom on the Magic Mouse.
So see if that's what's happening with you. I have to really watch it. I've gotten much better at not subconsciously tapping on the top, but it still happens every once in a great while. Otherwise, I love the Magic Mouse.
EDIT: If this is what's happening with you, you can undo it by tapping again on the top of the mouse. It's like a toggle.

I ma using Firefox 4 in widows xp 32 bit, Everything was working fine in Firefox 3.x series, but after installing to Firefox 4 i am constantly getting this "not responding" by Firefox for like 5-10 seconds , almost every day.

Hi, i ma using Firefox 4 in widows xp 32 bit,
Everything was working fine in Firefox 3.x series, but after installing to Firefox 4 i am constantly getting this "not responding" by Firefox for like 5-10 seconds , almost every day.

Hi, i ma using Firefox 4 in widows xp 32 bit,
Everything was working fine in Firefox 3.x series, but after installing to Firefox 4 i am constantly getting this "not responding" by Firefox for like 5-10 seconds , almost every day.

Have to install flash player almost every day

It seems like I have to un-install the re-install flash
player almost every day. I download it one day every thing works
great on all websites that use flash. Then the next day not flash
site works therefore I have to un-install flash player then
re-install it to view flash content. Then the whole cycle repeats.
Does anyone else have this problem? Thanks.

Yes I do!

Why the Flash Player updates almost every day?

Why does the Flash Player update almost every day?

You think these are the only/main cause of security issues?
As a developer let me tell you it is far from the case. Most security issues are a direct result of user carelesness.
Let me give you an example....
I'm just a loley ole developer, no one special, but I do create many web apps/mobile apps, and many are free, and widely distributed.
One example is a social networking web app based on html5 and google maps api - a gps enabled social web app.
trufaces.com
This is just one example of hundreds, I offer free hosting services truimagz.com/host and mush more.
Anyway, the point is... do you have any idea how many people sign up using an email adress and their actuall email password as their login info?
90%+
I, just some schmuck, have access to over 50,000 email accounts and passwords at any given moment. Thank god I'm trustworthy eh?
Just food for thought.

I need to reset my time capsule/airport every day - time capsule has green light but I don't see any wifi signal on my mac and other computers.

as many of you do, I use time capsule as airport, too...
It worked fine for 6 months or so after I bought the new time capsule. (I bought it in September 2012.)
Since the beginning of this year, I had to reset, and power off and plug it in almost every week, then now I need to reset and power off and back on again every day...
When I first set up the time capsule, I followed the instruction with the manual.
But, now I am so lost and don't want to reset every day for wifi connection.
Anyone has problem like me or knows how to solve this issue?
Please help..
I have MacBook Pro OS X 10.8.4 & my roommates have PCs. (just in case if it helps...)

For PC it is important the wireless has names that are compatible.. short.. like 10 characters.. but 2-20 is fine. no spaces.. and pure alphanumeric.
Use WPA2 personal only.. with pure alphanumeric password .. again 10-20 characters should be fine.
The latest firmware is a dud. Go back to 7.6.1
Open the airport utility.. click on the TC and holding the option key click the actual version number..
Go back to 7.6.1 is simple.. just select it and away it will go.. ignore future requests for upgrade.. you can also tell the utility not to check weekly for updates. You will need 5.6 utility for this I think..
So do the firmware downgrade.
Then do a factory reset and follow the name information above.. for TC name as well btw.. wireless name/s and disk share name.. which by default is data and that is fine.
So some instructions in...
The Factory Reset.
Power down the TC.
Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
(I fix TC and have several reset levers bent over and jammed or broken off).
Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
Keep holding in reset for about 10sec until the front LED flashes rapidly.
Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
You can also load airport utility into a pc and get access to all the settings. Untick the box for firmware updates.. it will still bug you occasionally.. regardless of the setting.. just ignore it..
You might still need to do the occasional reboot of the TC as well.

Thinkpad Yoga crashes almost every day

A few weeks ago my 4-year old laptop started crashing a few times every week, so I decided to get a TPY. I received a 20CD000MMH (I5, 8 Gb RAM, 500Gb HDD+16Gb M.2 SSD) with windows 8.1 Pro (64 bit) on the 20. Feb and since then the longest time it has kept running is less than 48h. I've been downloading both recommended and optional (12. Feb BIOS update was optional!) Windows and Lenovo's System Updates every day, sometimes twice a day: after a crash System Update usually wants me to reinstall the LAN driver. I've reinstalled Intel's graphics driver several times over as well. For example yesterday screen brigthness was stuck at max after a BSOD, so at least it seems sometimes System Update is right in it's reccomendations.
Currently I have 5 files in the Windows minidump folder, about as many BSODs did not result in any. I've also done 2 resets after discovering in the morning that the computer is almost too hot to hold and won't shut down. Fortunately those have not recurred since disabling "turn off display" last week and checking every time I go to sleep that the computer really is off.
I haven't found many posts from other people who have this many crashes - I'm starting to feel I'm missing something obvious or have a really, really bad example of a TPY. At least there are no ghosting issues, although the SSD worked for caching for only a single glorious day of sub 20 sec. boots. Now I'm back to 1min+...
Does anyone have any advice, besides returning it? The only thing I think I haven't tried yet is messing with the virtual network adapter (http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Thinkpad-Yoga-not-waking-up-after-sleep/td-p/1348... as I'm afraid of permanently losing the network connection (which has been working fine) or something and I haven't foud any real instructions.

And an update about my TPY also: my local Lenovo service couldn't find any hardware or software issues and it did not crash when it was there for two and a half days. They barely used it though. They did suspect the problem might have something to do with Lenovo and Microsoft programs being incompatible (both have power managers, for example) while running simultaneously. We decided to test software issues by having them reinstall Windows (on a 128 Gb M.2 SSD, which I had bought a few days before as I was sick and tired of the barely functional SSD caching) and by me avoiding any and all updates besides antivirus definitions. So far I've had one crash in 3 days, although it was not a BSOD. It just freezed up while watching a video and I had to reset it with a pin. So things have gotten better, especially considering I now can start using the computer in less than 30 seconds instead of 3 minutes after a crash. It's still not good though and there seem to be some memory issues: when I wake up the computer or restart Windows the setting keep changing for no reason. So far the desktop background has changed color, scaling goes from 125% (which I prefer) to either 100% or 150% and the mouse pointer size changes. Also I've gotten some memory errors (displayed too briefly to write down) when making changes to the account that require me to log off. I'll keep it for a few days and look for additional problems but it looks like I'm going to have to have the motherboard replaced...

Database auto restart at 2:00 AM every day

Hi,
I've installed 10.2.0.2.0 database in Windows 2000 Server.
Now it restarts automatically at 2:00 AM every day.
I've checked OS, there is no JOB run at 2:00 AM, and event viewer look normal at 2:00 AM.
When it restarts, sometimes it would restart successfully, sometimes it wouldn't(mounted, not open).
Here is the alert log.
Thu Jan 31 15:23:37 2008
Thread 1 advanced to log sequence 115
Current log# 5 seq# 115 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\MALECARE\REDO05.LOG
Thu Jan 31 22:00:21 2008
Thread 1 advanced to log sequence 116
Current log# 6 seq# 116 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\MALECARE\REDO06.LOG
Fri Feb 01 00:50:52 2008
Thread 1 advanced to log sequence 117
Current log# 3 seq# 117 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\MALECARE\REDO03.LOG
Fri Feb 01 02:00:16 2008
Starting background process EMN0
EMN0 started with pid=32, OS id=5848
Fri Feb 01 02:00:16 2008
Shutting down instance: further logons disabled
Fri Feb 01 02:00:17 2008
Stopping background process QMNC
Fri Feb 01 02:00:18 2008
Stopping background process CJQ0
Fri Feb 01 02:00:19 2008
Stopping background process MMNL
Fri Feb 01 02:00:20 2008
Stopping background process MMON
Fri Feb 01 02:00:21 2008
Shutting down instance (immediate)
License high water mark = 17
Fri Feb 01 02:00:21 2008
Stopping Job queue slave processes
Fri Feb 01 02:00:22 2008
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Fri Feb 01 02:00:31 2008
ALTER DATABASE CLOSE NORMAL
Fri Feb 01 02:00:31 2008
SMON: disabling tx recovery
SMON: disabling cache recovery
Fri Feb 01 02:00:32 2008
Shutting down archive processes
Archiving is disabled
Fri Feb 01 02:00:52 2008
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC0: Archiving disabled
Fri Feb 01 02:00:52 2008
ARCH shutting down
ARC0: Archival stopped
Fri Feb 01 02:00:53 2008
ARC2: Becoming the 'no FAL' ARCH
Fri Feb 01 02:00:53 2008
ARC2: Becoming the 'no SRL' ARCH
ARC2: Archiving disabled
ARCH shutting down
ARC2: Archival stopped
Fri Feb 01 02:00:54 2008
ARC3: Becoming the 'no FAL' ARCH
ARC3: Becoming the 'no SRL' ARCH
ARC3: Archiving disabled
Fri Feb 01 02:00:54 2008
ARCH shutting down
ARC3: Archival stopped
Fri Feb 01 02:00:55 2008
ARC1: Becoming the heartbeat ARCH
Fri Feb 01 02:00:55 2008
ARC1: Archiving disabled
ARCH shutting down
ARC1: Archival stopped
Fri Feb 01 02:00:57 2008
Thread 1 closed at log sequence 117
Successful close of redo thread 1
Fri Feb 01 02:00:57 2008
Completed: ALTER DATABASE CLOSE NORMAL
Fri Feb 01 02:00:57 2008
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Fri Feb 01 02:01:00 2008
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 197132288
shared_pool_size = 0
__large_pool_size = 4194304
large_pool_size = 0
__java_pool_size = 4194304
java_pool_size = 0
__streams_pool_size = 0
streams_pool_size = 0
spfile = C:\ORACLE\PRODUCT\10.2.0\DB_1\DBS\SPFILEMALECARE.ORA
sga_target = 805306368
control_files = C:\ORACLE\PRODUCT\10.2.0\ORADATA\MALECARE\CONTROL01.CTL, C:\ORACLE\PRODUCT\10.2.0\ORADATA\MALECARE\CONTROL02.CTL, C:\ORACLE\PRODUCT\10.2.0\ORADATA\MALECARE\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 591396864
db_cache_size = 0
compatible = 10.2.0.1.0
log_archive_max_processes= 4
db_file_multiblock_read_count= 16
db_recovery_file_dest = C:\oracle\product\10.2.0\flash_recovery_area
db_recovery_file_dest_size= 21474836480
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=malecareXDB)
job_queue_processes = 10
audit_file_dest = C:\ORACLE\PRODUCT\10.2.0\ADMIN\MALECARE\ADUMP
background_dump_dest = C:\ORACLE\PRODUCT\10.2.0\ADMIN\MALECARE\BDUMP
user_dump_dest = C:\ORACLE\PRODUCT\10.2.0\ADMIN\MALECARE\UDUMP
core_dump_dest = C:\ORACLE\PRODUCT\10.2.0\ADMIN\MALECARE\CDUMP
db_name = malecare
open_cursors = 300
pga_aggregate_target = 203423744
PMON started with pid=2, OS id=2112
PSP0 started with pid=3, OS id=3524
MMAN started with pid=4, OS id=3528
DBW0 started with pid=5, OS id=6008
LGWR started with pid=6, OS id=3544
CKPT started with pid=7, OS id=3516
SMON started with pid=8, OS id=3508
RECO started with pid=9, OS id=3504
CJQ0 started with pid=10, OS id=3824
MMON started with pid=11, OS id=3820
MMNL started with pid=12, OS id=676
Fri Feb 01 02:01:00 2008
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Fri Feb 01 02:01:00 2008
ALTER DATABASE MOUNT
Fri Feb 01 02:01:04 2008
Setting recovery target incarnation to 2
Fri Feb 01 02:01:04 2008
Successful mount of redo thread 1, with mount id 3434381212
Fri Feb 01 02:01:04 2008
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Fri Feb 01 02:16:04 2008
db_recovery_file_dest_size of 20480 MB is 15.35% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.

Hi,
We have a RMAN every 2:00 PM.
Here is the log.
Recovery Manager: Release 10.2.0.2.0 - Production on Thu Jan 31 14:00:00 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: MALECARE (DBID=3432372830)
connected to recovery catalog database
RMAN> CROSSCHECK ARCHIVELOG ALL;
2> DELETE NOPROMPT ARCHIVELOG UNTIL TIME 'SYSDATE-7';
3> exit
starting full resync of recovery catalog
full resync complete
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=141 devtype=DISK
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_24\O1_MF_1_77_3SGWO1JH_.ARC recid=50 stamp=644806820
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_24\O1_MF_1_78_3SHKS76X_.ARC recid=51 stamp=644828457
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_24\O1_MF_1_79_3SJYJ0M1_.ARC recid=52 stamp=644874242
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_25\O1_MF_1_80_3SKK0N8R_.ARC recid=53 stamp=644893207
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_25\O1_MF_1_81_3SKYJGFL_.ARC recid=54 stamp=644907024
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_25\O1_MF_1_82_3SM2RD0G_.ARC recid=55 stamp=644944142
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_25\O1_MF_1_83_3SMTVZDW_.ARC recid=56 stamp=644968834
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_26\O1_MF_1_84_3SN5DXH1_.ARC recid=57 stamp=644979617
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_26\O1_MF_1_85_3SNY0W44_.ARC recid=58 stamp=645004830
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_26\O1_MF_1_86_3SPCRCFB_.ARC recid=59 stamp=645051661
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_27\O1_MF_1_87_3SPSS7JO_.ARC recid=60 stamp=645066026
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_27\O1_MF_1_88_3SQVFHY8_.ARC recid=61 stamp=645100466
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_27\O1_MF_1_89_3SRCDP11_.ARC recid=62 stamp=645116824
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_28\O1_MF_1_90_3SSG4YLD_.ARC recid=63 stamp=645152418
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_28\O1_MF_1_91_3SSZS0LF_.ARC recid=64 stamp=645170467
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_28\O1_MF_1_92_3SV84W2B_.ARC recid=65 stamp=645211806
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_28\O1_MF_1_93_3SVR09FF_.ARC recid=66 stamp=645228044
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_29\O1_MF_1_94_3SW2K0XN_.ARC recid=67 stamp=645238820
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_29\O1_MF_1_95_3SYDCGXP_.ARC recid=68 stamp=645314417
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_30\O1_MF_1_96_3SYPWVL8_.ARC recid=69 stamp=645325214
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_30\O1_MF_1_97_3T10Q554_.ARC recid=70 stamp=645400807
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_31\O1_MF_1_98_3T1C8TO9_.ARC recid=71 stamp=645411613
validation succeeded for archived log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_31\O1_MF_1_99_3T2D3M5V_.ARC recid=72 stamp=645445238
Crosschecked 23 objects
released channel: ORA_DISK_1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=141 devtype=DISK
deleted archive log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_24\O1_MF_1_77_3SGWO1JH_.ARC recid=50 stamp=644806820
deleted archive log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_24\O1_MF_1_78_3SHKS76X_.ARC recid=51 stamp=644828457
deleted archive log
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\MALECARE\ARCHIVELOG\2008_01_24\O1_MF_1_79_3SJYJ0M1_.ARC recid=52 stamp=644874242
Deleted 3 objects
Recovery Manager complete.
select to_char(LAST_DATE,'yyyy-mm-dd hh24:mi:ss'),
to_char(NEXT_DATE,'yyyy-mm-dd hh24:mi:ss'),interval
from dba_jobs
TO_CHAR(LAST_DATE,'YYYY-MM-DDHH24:MI:SS') TO_CHAR(NEXT_DATE,'YYYY-MM-DDHH24:MI:SS') INTERVAL
2008-02-01 12:14:54 2008-02-01 12:19:54 SYSDATE + 5/1440
2008-02-01 12:18:54 2008-02-01 12:19:54 sysdate + 1 / (24 * 60)
2008-02-01 12:09:49 2008-02-01 13:09:49 SYSDATE + 1/24
2008-02-01 12:09:49 2008-02-01 13:09:49 SYSDATE + 1/24
2008-01-27 12:00:01 2008-02-03 12:00:00 TRUNC(NEXT_DAY(SYSDATE, 1))+12/24
2008-02-01 01:00:02 2008-02-02 01:00:00 TRUNC(SYSDATE+1)+1/24

I am getting error code 50 almost every day

Almost every time I want to move a photo from my desktop to a file, I get error code 50. The computer has to be turned off to fix it. Why would I be getting this error code and how can I fix it.

Hi Evelyn,
paramErr
= -50, /*error in user parameter list*/
What are you doing when this happens? Is it maybe time Machine having trouble?
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Bought my I-Pad in Nov. Just Wi-Fi. Use almost every day and re-charge battery at 50%-- usually every 3-4 days. Just finished re-charging to 100% today and was playing a video when it just stopped working. Only picture of the Apple logo.

Bought my I=pad (wi-fi) in Nov. Use sometime alsomst every day and re-charge battery at 50%. Usually every 3-4 days. Just finished re-charging to 100% and was playing a video. Stopped and I turned it off and when I turned it back on, just got the Apple Logo. is the battery no good after only 6 months?

The battery is not likely the culpret. Something to hung up. You need to reboot:
Hold the home and power button at the same time for about 10 seconds (Keep holding past the swipe to shut down) and when the Apple Logo again appears, let go and your iPad should come back to life.

I need to restart my iPhone 4s almost every day. Settings app unresponsive

Similar Messages

Maybe you are looking for