I need to return to 10.0.9

After upgrading a few days ago to Mavericks on my laptop, I found my FCPX was updated to 10.1. Unfortunately, my main computer, a Mac Pro, is still running Mountain Lion (with FCPX 10.0.9) and I need to stay on that for the time being.
Today I received the message:
Time Machine completed a verification of your backups. To improve reliability, Time Machine must create a new backup for you.
I thought this problem had been solved because I had not had it in a couple of years. The two or three times I have received it, it appeared that there's nothing to be done but accept the loss of all backups and create a new one.
I need to go back to Mountain Lion on this laptop or at least go back to FCPX 10.0.9. But because Time Machine decided to take this moment to blow up on me I don't know how to restore Mountain Lion with FCPX 10.0.9.
How can I return to the previous version of FCPX 10.0.9? Thank you in advance.

Ian, thank you for the quick reply. Whenever I say to someone "It's as simple as that," there's usually a part of me that is internally saying, "Of course, this may cause..." or "Just watch out for..."
So, will copying FCPX 10.0.9 from my Mountain Lion Mac Pro to my Mavericks laptop have any issues? Will I still be able to update FCPX in the future? Can both versions of FCPX coexist on the same machine?
Thank you again for your assistance.
BflatBlues

Similar Messages

Need help returning correct name from a code created movie clip

Hello. I am an AS3 n00b with hopefuly a simple question I am designing a simple game in flash. This code creates an array of movie clips and asigns a picture to each one. It is a map screen. What I need is when I click on one of the created movie clips, I need it to return either the index of the clip in the array or the name of the clip. Basicaly anything I can use to tell them apart in the code. Here is the code:
import flash.display.MovieClip;
var MapLoader:Array = new Array();
var strJPGext:String = ".jpg";
var intContTileNumber:int;
var strContTilePath:String;
var intDistStartX:int = 63;
var intDistStartY:int = 64;
var intDistMultiplyY:int = 0;
var intDistMultiplyX:int = 0;
var intDistCount:int = 0;
var MapSquare:Array = new Array();
for (var i:int = 0; i < 729; i++)
         //var MapSquare:MovieClip = new MovieClip();
        MapSquare.push (new MovieClip());
        MapSquare[i].x = intDistStartX + (intDistMultiplyX * 30);
        MapSquare[i].y = intDistStartY + (intDistMultiplyY * 30);
        MapSquare[i].name = "MapSquare" + i ;
        addChild(MapSquare[i]);
        intContTileNumber = i;
        MapLoader.push (new Loader);
        strContTilePath = intContTileNumber + strJPGext;
        MapLoader[i].load(new URLRequest(strContTilePath));
        MapSquare[i].addChild(MapLoader[i]);
        intDistCount++;
        intDistMultiplyX++;
        if (intDistCount > 26){
        intDistCount = 0;
        intDistMultiplyX = 0;
        intDistMultiplyY++;
stage.addEventListener(MouseEvent.CLICK, reportClick);
function reportClick(event:MouseEvent):void
    trace("movieClip Instance Name = " + event.target.name);
Now all this works fine, it creates the map and assigns the correct picture and places them in the correct X,Y position and it is the correct grid of 27x27 squares. The problem is with the name, when I click on the movie clip, it returns "Instance2" or "Instance5" or whatever. It starts with 2 and then increases each number by 3 for each clip, so the first one is 2, then 5 then 8 and so on. This is no good. I need it to return the name that I assigned it
. If I put the code in trace(MapSquare[1]) it will return the name "MapSquare1" so I know the name was assigned, but it isnt returning.
Please assist
Thanks,
-red

Thanks for the resopnse,
I know I dont really need the name, I just need the index number of the array, but I cant figure out how to get the index name without specificaly coding for it. That is why in the listener event I use event.target.name because I dont know what movie clip is being clicked until it has been clicked on. Basically when a movie clip is clicked it needs to return which index of the array was clicked.
I could do it this way:
MapSquare[0].addEventListener(
MouseEvent.MOUSE_UP,
function(evt:MouseEvent):void {
    trace("I've been clicked!");
MapSquare[1].addEventListener(
   MouseEvent.MOUSE_UP,
   function(evt:MouseEvent):void {
     trace("I've been clicked!");
MapSquare[2].addEventListener(
   MouseEvent.MOUSE_UP,
   function(evt:MouseEvent):void {
     trace("I've been clicked!");
... ect
but that is unreasonable and it kind of defeats the purpose of having the array in the first place. The code that each movie clip executes is the same, eventualy that index will be passed into a database and the data at that primary key will be retrieved and returned to the program. So I just need to know, when one of those buttons is clicked, which one was clicked and what is its index in the array.
I am a VB programer and in VB this is very easy, the control array automatically sends its own index into the function when one of the buttons is clicked. It seems simple enough, I just dont know how to do it in action script.
Thanks again,
-red

Advice on how to access photos on an iPad that were synced from a now failed laptop? The question stems from a need to return my current iPad having just taken delivery of a new unit. Thanks

I am after some advice on how to access photos on an iPad that were synced from a now failed laptop? The question stems from a need to return my current iPad having just taken delivery of a new unit. Thanks

If you have a dropbox account, there's a free app (probably more) that syncs photos to your dropbox account - picbox.
There's also PhotoSync that syncs photos to/from a number of different services and devices.

Received ipad2 synced to itunes and uploaded my backup, now I find out it does not have WiFi 3G and need to return it, is there a way of getting all of my data off the ipad2?

Received ipad2, synced to itunes and uploaded my backup from my Ipad, now I find out that it does not have Wi-Fi+3G, need to return it, is there a way to get my data off the ipad2 so I can return it?

if you mean restore it to factory default then you can choose that while having it connected to the computer and using itunes

Why do I need to return the old part, if I purchase a new part?

Well, I had a problem with my motherboard, and got it replaced by an on-site tech HP sent me.
The notebook is well out of warranty, aand I paid for the new motherboard+labor.
However, when the tech showed up, he said he won't replace the motherboard unless I give him the old motherboard. He went on to say that this was the "company policy" and he won't let me keep any old part even if I pay for the new part.
I was too tired t o argue with him, and he replaced the motherboard, and took away the old motherboard.
On second thought, this is pretty absurd.
It's like HP telling me "If you purchase a new HP notebook, you'll have to return your old HP notebook back to us".
It would make sense if I was getting a free replacement and the notebook was under warranty. It doesn't make any sense when the notebook is out of warranty and I'm paying for the replacement part.
Think of it, when I purchased the notebook, i obviously paid for the motherboard that came with the notebook. So why does HP get to take it away from me?
If I purchase a new battery from HP store instead of amazon, do I need to return my old battery to HP?
If I purchase a new keyboard from the HP store, do I need to return my old keyboard?
I can give you the case number if you want.
Honestly, if this is the "company policy", I won't ever bother with another HP product again.
This question was solved.
View Solution.

HP only has new motherboards. They sell the bad ones into the Chinese market and they show up on eBay and similar places. You have a new motherboard. If you can tell us the part number of what you bought we can tell you the "full" price and the "exchange" price of the part. They should definitely explain the options to you but I think they likely assume you want the lower exchange price.

Need to return data from a query in different ways - Please help

We are using 10g R2
I have a proc as follows that has a query with over 100 values in the select clause:
proc one( input param1, input_param2,.... output_cursor )
as
begin
open cursor for
select ...about 100 values with most of them being calculated
from table1, view 1, table2, table 3, view 2 ...
where ....
and table1.col1 = input param1
and table1.col2 = input param 2
and view1.col5 = input param5...
end;
I need to return the data that comes from the above query in different formats, columns for a report would be different from columns for screen A and different for screen B. I need only certain columns for a report and different set of columns for another screen. I have wrapper procs that get different input params. From the wrapper procs I intend to call the above proc but would like only selected values.
How can I accomplish this? Since my main goal is to select different columns for each wrapper I was thinking of insert the data from the above proc into global temp table and selecting whatever columns and order I want from the wrappers.
What do you think? Any other solutions?
Thanks
Edited by: user565033 on Jan 21, 2013 7:50 PM

You need to clearly separate roles and responsibilities. The PL/SQL code that creates and supplies a cursor handle is server code tasked to supply data. The code that makes the call for server data, is responsible for formatting and rendering that data.
Thus moving data formatting into the server code needs to be question. Simple example. Cursor does not return invoice date as a date - but formats it into a string using TO_CHAR().
This works for client1 - as that is the date format expected. However, client2 has different International settings and specifies a different date format. Invoice date, formatted into a string by the server, now renders in the wrong format on client2.
Server code should not be concerned with rendering and formatting of data send to a client.
As for the idea to use a global temp table is ..., well to put it nicely, it smells. Badly.
The single most expensive operation on a database platform is I/O. And now you want to read server data and write it to temporary storage, and the read data from temporary storage to return to the client? What on earth for!? Why purposefully increase the size of the I/O workload? Why decrease performance and undermine scalability?
Provide a proper abstraction interface to the client. Enable it to specify (as simplistically as possible) what it wants ito data. There are a number of ways to design and implement this in PL/SQL. Simplistic example:
SQL> create or replace package Employees as
2
3          EMP_FULL_DETAILS        constant integer := 1;
4          EMP_BASIC_DETAILS       constant integer := 2;
5
6          procedure GetEmpByID(
7                  cur out sys_refcursor,
8                  empID in emp.empno%type,
9                  template in integer default EMP_BASIC_DETAILS
10          );
11
12          procedure GetEmpByName(
13                  cur out sys_refcursor,
14                  empName in emp.ename%type,
15                  template in integer default EMP_BASIC_DETAILS
16          );
17 end;
18 /
Package created.
SQL>
SQL> create or replace package body Employees as
2
3 type TArray is table of varchar2(32767);
4
5 TemplateList       constant TArray :=
6          new TArray(
7                  'EMPNO, ENAME, JOB, MGR, HIREDATE, SAL, COMM, DEPTNO ',
8                  'EMPNO, ENAME, JOB '
9          );
10
11 procedure GetEmpByID(
12          cur out sys_refcursor,
13          empID in emp.empno%type,
14          template in integer default EMP_BASIC_DETAILS
15 ) is
16          sqlSelect       varchar2(32767);
17 begin
18          sqlSelect :=
19                  'select '||TemplateList(template)||
20                  'from emp where empno = :empID';
21
22          open cur for sqlSelect using empID;
23 end;
24
25 procedure GetEmpByName(
26          cur out sys_refcursor,
27          empName in emp.ename%type,
28          template in integer default EMP_BASIC_DETAILS
29 ) is
30          sqlSelect       varchar2(32767);
31 begin
32          sqlSelect :=
33                  'select '||TemplateList(template)||
34                  'from emp where ename like :empName';
35          open cur for sqlSelect using empName;
36 end;
37
38
39 end;
40 /
Package body created.
SQL>
SQL> var c refcursor
SQL>
SQL> exec Employees.GetEmpByID( :c, 7499 );
PL/SQL procedure successfully completed.
SQL> print c
     EMPNO ENAME      JOB
      7499 ALLEN      SALESMAN
SQL>
SQL> exec Employees.GetEmpByName( :c, 'A%', Employees.EMP_FULL_DETAILS );
PL/SQL procedure successfully completed.
SQL> print c
     EMPNO ENAME      JOB               MGR HIREDATE                   SAL       COMM     DEPTNO
      7499 ALLEN      SALESMAN         7698 1981/02/20 00:00:00       1600        300         30
      7876 ADAMS      CLERK            7788 1987/05/23 00:00:00       1100                    20
SQL>

What equipment (HTC Imagio) do I need to return with the cell phone?

Hi,
I took a one month global travel program Imagio phone, and now need to return the equipment for credit. However, I can't recall all the pieces that came with it. So far, I have the htc imagio phone unit, along with the following:
one connection wire
one unit (the charger?) with a 2-prong plug built into it
one htc unit (adapter?) also with a 2-prong plug built into it
a teeny-teeny-tiny screwdriver
Does anyone know if I am missing any part? Sorry my memory is so lame. I know, I should have written it down! My bad.
Thanks, VeeMar

Just return the modem and its power cord/power pack. When they provide Ethernet cables, coax, and splitters, those items become yours.

I bought a new ipod today and i can not get it to connect to my mac oe my itune account it say s i need ituned 10.4 so i tried to download it, it then says i need mac osx10.5 so i tried to down load it but it says something else do i need to return it?

I bought a new ipod touch today. I tried to install it and it says i need itunes 10.4 so i tried to download that, it said i needed mac os x 10.5 so i tried to down load that it gave me another message. how do i get my new ipod onto my mac? Or do i need to return the ipod?

New iPod Touch devices require a minimum of Mac OS X Leopard 10.5.8 in addition to a fairly recent version of iTunes. If you are running Tiger (10.4) or earlier, you can't just update to Leopard for free; you have to buy it.
http://support.apple.com/kb/ht1447

Need to return the fieldnames from an acess database

I need to return the fieldnames (column headings) from an acess database.

What drivers are you using to access the database. In ADO it's very easy - in fact it's almost a side effect of getting our data. If you're using the Database Connectivity Toolkit, I don't know. Check out this thread for alternate code. The example "Basic Query.vi" in the zip file I uploaded shows the basic process that you go through to read data using ADO. You'll notice that the column names are very easy to get to.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Grreat potential, but I need to return it....

I really like the AppleTV for it's size, capabilities, and ease of use but it has a fatal flaw for me that means I need to return it.
With over 700 ripped-DVD's in my iTunes collection, plus > 40 Gigs of music I never get any of my iphoto collection onto the box which means that the default screen saver shows the default Apple images loaded onto the system rather than the ones of my grand-daughter we want to see. To state that my wife is unhappy with this one problem would be an understatement, so unless someone can explain how I can force my iPhoto Library in place it's back to the MythTV box for me.
Thanks,
Graham
Mac OS X (10.4.9)

I don't think that is accurate about the number of photos that you can get on the Apple TV, I think you can get your full collection or very close. I comfortably have 14,000 on my Apple TV. I didn't think they would fit but it appears there might be some kind of compression going on as they move to the Apple TV, which may explain why it takes a LONG TIME to sync photos. Start it and go to bed or to work (and check on it when you get back, it may not be done - ha ha). By the way, I suggest clearing off all other content (with exception of a few of your favorite music files which you can use to play along with your photo slideshows). I had exactly the same reaction as you initially when I realized the photo situation. However fortunately the syncing works so well that is fully reasonable to keep movies and majority of music on your computer and use Appled TV hard drive only for photos and a little music. Try it before you give up on it. Wifey will be happy .

HT204266 i need to return an app i just purchased, how do i do that?

i need to return an app i just purchased, how do i do that?

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I modify a document en word and saved it. I need to return to the document before the modification. How can I do it? Thank You

I modify a document en word and saved it. I need to return to the document before the modification. How can I do it? Thank You

Are you using Time Machine? If not, do you have a backup?
Best of luck.

I have just uploaded 31.3.0. I need to return to earlier version. Please send it to me.

I have just uploaded 31.3.0. I need to return to earlier version. Please send it to me.
The new version is horrible. The alternating blue/white/blue/white colors in address lines are making me dizzy and sick. Same thing is happening in SUBJECT line. I don't go to discos, and I don't want flashing, changing colors on my screen. It slows me up - I used to type first letters of a name as recipient, now I need to wait for the color to change or something.
Please send me the previous version, which was perfect.
Thank you,
David

David you can find any TB version here:
http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/
but i don't think that there are flashing colours in the new version

I have bought an IPad in the US however need to return in the UK, am i able to receive a full refund? Note: i have removed the outer packaging.

I have bought an IPad in the US however need to return in the UK, am i able to receive a full refund? Note: i have removed the outer packaging.

I have no idea if you can do anything with it in the UK. All you can do is ask for help. Just be prepared for the possibility that they can do nothing for you because the device was purchased in the US.
You may have to contact the store from which you purchased the device in the US to see if you can send it back to them in exchange for the Mini. This assumes you are within the 14 day window and they will accept it without all the expected packaging.
Beyond that I don't think anyone here can tell you with any certainty what you can do under the given circumstances. All you can do is ask. The worst that can happen is everyone says, "No."

I need to return a external drive to windows NTFS uncompressed but disc utility keep formatting in NTFS compressed

I need to return an external drive (Seagate GoFlex Satellite) to windows NTFS uncompressed format but disc utility keeps formatting in NTFS compressed.

OS X can only read NTFS partitions. I doubt it can create them. I only see MSDOS FAT and ExFAT as choices in Disk Utility and neither are NTFS. If you have MacFUSE installed and the NTFS-3G plugin you might be able to do it in Disk Utility. However, it will be very very slow.
It might be easier to connect the drive to a PC and format it that way. Use the quick format option unless you suspect the disk to have bad sectors. Or setup Boot Camp, install Windows and format the drive when you dual boot into Windows. Or you could setup a virtual machine using Oracle VirtualBox, Parallels, or VMWare Fusion to access Windows so you can format the disk.

You need to return your kit - What?

Hello,
Just writing because I have just got an email from BT that says "Hello Mr xxx, We're sorry you no longer need your BT equipment..." The subject is: "You need to return your kit"
I have not cancelled my services with BT, so why did I get this email?
My line was disconected in error 7 months ago and it seems that I will have the same problem again!
If anyone could let me know what is the problem that would be much appreciated.
Many thanks,
Sergio
Solved!
Go to Solution.

I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they cannot deal with service issues that way.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail, when its your turn in the queue.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

I need to return to 10.0.9

Similar Messages

Maybe you are looking for